Hi I just bought a Gionee Gpad G1.. 5" screen with 1 GHz dual core 512 mb ram and 8 mp camera. This one comes with a ICS 4.0.4. Now after good amount of hiccups.. i finally rooted it and want to install CWM or TWRP or any better recovery to install a custom rom but can not find any recovery compatible with my phone.... PLEASE HELP OUT!!!
Its got a mt6577 board on it
where can i get a recovery thats compatible and a rom.. ???? the stock recovery sucks!!
pratikmore said:
search for mtk droid tool and tutorial for mt6577 recovery by yuweng.then you can easily make cwm recovery or twrp recovery.
EDIT
http://forum.xda-developers.com/showthread.php?t=1825722
Sent from my T29 using Tapatalk 2
Sent from my T29 using Tapatalk 2
Click to expand...
Click to collapse
Thanx anyways i got it done with just mtkdroidtools!!!! it did make a cwm recovery with the help of boot img... and is working fine!!!
Related
I have successfully rooted the tablet
Then i extracted recovery.img using recovery dumping method
and then using that i created clockwork mod recovery using clockwork mod builder . i put the recovery in sdcard
and flashed it using terminal emulator
su
dd if=/sdcard/recovery.img of=/dev/mtd/mtd3
Click to expand...
Click to collapse
Click to expand...
Click to collapse
it showed successfully transferred the files
and when i boot into recovery it bricked It is showing black screen
when i connect it to usb cable it shows unidentified device
becase it is iball i cannot get the stock firmware any were
device specifications
Hardware :rk2928 rockchip based
PROCESSOR :arm cortex a9 1.2 ghz
Os :JELLYBEAN 4.1.1
Ram : 1gb ddr3
i do have system.img
recovery.img
data.img
Soft Bricked!
sooorajjj said:
I have successfully rooted the tablet
Then i extracted recovery.img using recovery dumping method
and then using that i created clockwork mod recovery using clockwork mod builder . i put the recovery in sdcard
and flashed it using terminal emulator
it showed successfully transferred the files
and when i boot into recovery it bricked It is showing black screen
when i connect it to usb cable it shows unidentified device
becase it is iball i cannot get the stock firmware any were
device specifications
Hardware :rk2928 rockchip based
PROCESSOR :arm cortex a9 1.2 ghz
Os :JELLYBEAN 4.1.1
Ram : 1gb ddr3
i do have system.img
recovery.img
data.img
Click to expand...
Click to collapse
I got it softbricked for good!Damn!
Edit:It's hard Bricked!!!
Is there any way I can go past the iball logo?There's no recovery or download mode for this tab....
iBall Stock Firmware
This thread has appeared recently and may help:
http://forum.xda-developers.com/showthread.php?t=2521289
Impulse36 said:
I got it softbricked for good!Damn!
Edit:It's hard Bricked!!!
Is there any way I can go past the iball logo?There's no recovery or download mode for this tab....
Click to expand...
Click to collapse
I got it repaired by now... Thanks Now off to modding and overclocking stuffs....
Sent from my GT-I9070 using XDA Premium 4 mobile app
urgent help needed
Impulse36 said:
I got it repaired by now... Thanks Now off to modding and overclocking stuffs....
Sent from my GT-I9070 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
==============================
Can you please help me with my hard bricked iball slide 3g7334i
I was trying to install ubuntu touch on it after having seen one ubuntu touch on iball slide
Can we please have an appointed time to chat online at XDA forum PLEASE..... YOUR KIND HELP WOULD BE THANKFUL LOOKING FORWARD TO HEAR FROM YOU SOON AS POSSIBLE!!!!!
[email protected]
Zishan
====================
How to install twrp for my clone s4 with mtk6589 quad core cpu? Already rooted with motochopper, just want to have TWRP or CWM recovery so i can make nandroid backup so that i can mess around with the phonr
Sent from my GT-I9500 using xda app-developers app
SadvanceS said:
How to install twrp for my clone s4 with mtk6589 quad core cpu? Already rooted with motochopper, just want to have TWRP or CWM recovery so i can make nandroid backup so that i can mess around with the phonr
Sent from my GT-I9500 using xda app-developers app
Click to expand...
Click to collapse
Since there isn't any TWRP available for your clone device you can try compiling TWRP for your device, if your interested in compiling TWRP for your device I would recommend taking a look at this guide to compiling TWRP (This guide on porting Clockworkmod Recovery is also worth taking a look at).
hey guys am not sure if u guys are familar with the phone my saga but am gonna buy one of those and its most likely a mtk model.. maybe ..but anyways is it possible for me to install cwm on it or any custom recovery.
Sent from my GT-S5830L using xda app-developers app
BenDroid1 said:
hey guys am not sure if u guys are familar with the phone my saga but am gonna buy one of those and its most likely a mtk model.. maybe ..but anyways is it possible for me to install cwm on it or any custom recovery.
Sent from my GT-S5830L using xda app-developers app
Click to expand...
Click to collapse
if yes your phone is android is mtk, you can use this for tool
for tut to port any rom for your device you can read here
I don't want to necro this thread or anything, but I'm also having a problem with CWM. I'm attempting to port it to the HP Slate 7 Plus, but both manual builds and builds from the CWM Builder give a black screen when booted into recovery. The recovery.img I provided to the builder was fine, because I was able to reflash it and get back to stock recovery.
Ok I flash a cwm for my phone think I had same spec as goophone i5 but when I did that... the cwm didn't work but now I dont have a recovery at all now.. phone still work fine just lost stock recovery... need help fix that if anyone knows how.
Sent from my iPhone5 using XDA Premium 4 mobile app
Answer
jamiefff said:
Ok I flash a cwm for my phone think I had same spec as goophone i5 but when I did that... the cwm didn't work but now I dont have a recovery at all now.. phone still work fine just lost stock recovery... need help fix that if anyone knows how.
Sent from my iPhone5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You should not have flashed a ClockWorkkMod that was not meant for your phone.
If you can get the stock package of your phone, you can find those recovery images and just copy it to the same location on your phone.
If your device is not rooted, then AFAIK it is very difficult
You should not have flashed a ClockWorkkMod that was not meant for your phone.
If you can get the stock package of your phone, you can find those recovery images and just copy it to the same location on your phone.
If your device is not rooted, then AFAIK it is very difficult  
Your right I shouldnt install that cwm... but I do have it rooted and what file do I need to copy over on the stock rom?
Sent from my iPhone5 using XDA Premium 4 mobile app
Hello experts, i think its softbrick, i m using intex aqua i5 mini (i know its chinese) and i have changed bootanimation,and when i rebooted my device, the animation appeard bt i m not able to use my device. It stuck on sony erricson logo. Now plz tell me what can i do, 
My device is rooted, and i m on stock ROM. And phone is still in warranty.
I m able to get into recovery menu,but cant flash any update.zip file, bcoze my phone dosent have custom recovery, and whenever i tried to flash aroma file manager an error appear "installation aborted"
Cryin...crying...crying 
Plz help me out....
Sorry for my bad english......
Jamil69 said:
Hello experts, i think its softbrick, i m using intex aqua i5 mini (i know its chinese) and i have changed bootanimation,and when i rebooted my device, the animation appeard bt i m not able to use my device. It stuck on sony erricson logo. Now plz tell me what can i do, 
My device is rooted, and i m on stock ROM. And phone is still in warranty.
I m able to get into recovery menu,but cant flash any update.zip file, bcoze my phone dosent have custom recovery, and whenever i tried to flash aroma file manager an error appear "installation aborted"
Cryin...crying...crying 
Plz help me out....
Sorry for my bad english......
Click to expand...
Click to collapse
You'll have to factory reset using some leaked stock ROM for your phone off the internet. Data will be erased in the process. If you can still access your file system back up the stuff you don't want to lose. Go to this link http://androidxda.com/download-intex-stock-rom-models and find your phone model. Click the download button for it to get your stock ROM, then click the blue instructions hyperlink to read how to flash it. This will put your phone back to factory settings. Just an important thing to note, I have never tried those stock ROMS or the flash tool in the instructions so do this at your own risk.
Hmmm, thanx for your advice, i will try it tomorrow and let u know. Many thanx
Sent from my GT-I9500 using XDA Premium 4 mobile app
I have a nandroid backup in my sdcard, but i dont know how to flash it. Nandroid backup is in tar file formate.
Sent from my GT-I9500 using XDA Premium 4 mobile app
Jamil69 said:
I have a nandroid backup in my sdcard, but i dont know how to flash it. Nandroid backup is in tar file formate.
Sent from my GT-I9500 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
HOLD THE FACTORY RESET IDEA. I have found something that might help you restore your Nandroid backup. Unfortunately it involves using command prompt. This guide explains pretty clearly what to type and everything. If there is any part of this guide you don't understand, post a reply or send a message. http://www.modaco.com/topic/299479-howto-performing-a-nandroid-restore-manually-using-adb/. But before you do this you might want to follow this guide to know how to install the android debug bridge tools. http://www.howtogeek.com/125769/how-to-install-and-use-abd-the-android-debug-bridge-utility/
Thanx man, flashd the stock ROM, now everything is fine, thanx… thanx… thanx…
Sent from my Aqua i5 mini using XDA Premium 4 mobile app
I have also the same problem of bootloop .. I have karbon a1+ douple android 4.2.2 jelly bean . i have also download rom android xda and sp flash tool
How to install rom from recovery
Sent from my Karbonn A1+ Duple using xda app-developers app