Hi to all people out here, my problem is when I flash AOKP roms I can't connect my Wi-Fi, I recently tried CM10,paranoid android, but when I flash AOSP roms like, wanamlite, omega, Xperianze my Wi-Fi works perfectly hope you can help me with this problem
Sent from my GT-I9300 using Tapatalk 2
aldus320 said:
Hi to all people out here, my problem is when I flash AOKP roms I can't connect my Wi-Fi, I recently tried CM10,paranoid android, but when I flash AOSP roms like, wanamlite, omega, Xperianze my Wi-Fi works perfectly hope you can help me with this problem
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Search its a known problem question asked and asked and asked .
jje
JJEgan said:
Search its a known problem question asked and asked and asked .
jje
Click to expand...
Click to collapse
Can you link me to the thread?
Sent from my GT-I9300 using Tapatalk 2
When you say works on aosp ROM do you mean sami ROMs also when you say WiFi doesn't work is it a Obtaining Ip Address loop
neilster2020 said:
When you say works on aosp ROM do you mean sami ROMs also when you say WiFi doesn't work is it a Obtaining Ip Address loop
Click to expand...
Click to collapse
Yes obtaining ip address loop
Sent from my GT-I9300 using Tapatalk 2
aldus320 said:
Yes obtaining ip address . op
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=40604304&posted=1#post40604304
Think you have same problem as me this should work
neilster2020 said:
http://forum.xda-developers.com/showthread.php?p=40604304&posted=1#post40604304
Think you have same problem as me this should work
Click to expand...
Click to collapse
The wifi folder solution? From the busybox nightlies? I will replace the wi-fi folder of the aosp/cm10/aopk roms with the wi-fi folder of busybox?
Sent from my GT-I9300 using Tapatalk 2
aldus320 said:
The wifi folder solution? From the busybox nightlies? I will replace the wi-fi folder of the aosp/cm10/aopk roms with the wi-fi folder of busybox?
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Yes you take the WiFi folder from the root box ROM and use it to replace on whatever aokp/cm10/aosp rom you want
Thanks gonna try it, gonna replace it with rootexplorer or extract the rom and replace the wifi folder and compress it? Ang i gonna install the aokp/aosp rom?
Sent from my GT-I9300 using Tapatalk 2
aldus320 said:
Thanks gonna try it, gonna replace it with rootexplorer or extract the rom and replace the wifi folder and compress it? Ang i gonna install the aokp/aosp rom?
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
I solved this problem with help of neilster2020.
I replaced the wifi folder directly in the .zip file and then i flashed it. this works for me.:victory:
EyeHaveYou said:
I solved this problem with help of neilster2020.
I replaced the wifi folder directly in the .zip file and then i flashed it. this works for me.:victory:
Click to expand...
Click to collapse
neilster2020 said:
Yes you take the WiFi folder from the root box ROM and use it to replace on whatever aokp/cm10/aosp rom you want
Click to expand...
Click to collapse
thanks it works my wifi is working on cm 10 but it the paranoid rom it bootloopa at startup after installing the rom
Sent from my GT-I9300 using Tapatalk 2
aldus320 said:
thanks it works my wifi is working on cm 10 but it the paranoid rom it bootloopa at startup after installing the rom
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
http://wanamlite.com/2013/04/16/wanamlite-xxemc3-v6-5-android-jb-4-1-2-clean-stable/
I got paranoid android to work using the WiFi file from this ROM but I think any emc3 rom whould work
Thanks gonna try it
Sent from my GT-I9300 using Tapatalk 2
Related
So ive been seeing a lot of how do i use i777 zImage with xx rom for i9100 and make it work... So heres how
Method one
1. Get zImage from aokp if ur doing aosp rom or entropy or siyah with mic swap if ur doing tw. must be i777
2. Flash rom of choice...
3. Push kernel using heimdall or if u can make cwm
a. you can also unzip rom nd replace zImage in rom then rezip and flash
4. Go to market get es file explorer and set root rights
5. Go to /system/usr/keylayout
6. Modify sec_touchkey.kl and make it look like this:
key 158 BACK VIRTUAL
key 139 MENU VIRTUAL
key 107 SEARCH VIRTUAL
key 28 HOME VIRTUAL
7. Reboot
8. Enjoy and hit thanks
Can you upload the z image somewhere I don't have a computer available
Sent from my GT-I9100 using xda premium
Do we still need a modded phone.apk
Sent from my GT-I9100 using xda premium
Smacdallas said:
Can you upload the z image somewhere I don't have a computer available
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
The point of this guide is so people make there own. But you were joking right
mastergrillo said:
Do we still need a modded phone.apk
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Yes. i9100 phone.apk requires some changes.
MotoMudder77 said:
The point of this guide is so people make there own. But you were joking right
Yes. i9100 phone.apk requires some changes.
Click to expand...
Click to collapse
Personally i dont use modded apk for phone but what ev
howtomen said:
Personally i dont use modded apk for phone but what ev
Click to expand...
Click to collapse
You dont make phone calls? thought it was required for that, correctly atleast.
Please share if Im mistaken.
Wheres the spoonfeed button? Im too lazy to search on how to do this.
MotoMudder77 said:
The point of this guide is so people make there own. But you were joking right
Yes. i9100 phone.apk requires some changes.
Click to expand...
Click to collapse
Uhh... yeah yeah I was joking... btw how do I get rid of this yellow triangle!
Sent from my GT-I9100 using xda premium
MotoMudder77 said:
You dont make phone calls? thought it was required for that, correctly atleast.
Please share if Im mistaken.
Click to expand...
Click to collapse
Not required
Smacdallas said:
Uhh... yeah yeah I was joking... btw how do I get rid of this yellow triangle!
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Triangle away app for ics
Is this possible to do with MIUI v4??
afrojoc said:
Is this possible to do with MIUI v4??
Click to expand...
Click to collapse
Should be but u need AOSP kernel and im not sure if there is one with MIUI support... if there is than yes it will work.
U can try Fennys but no garuntee
howtomen said:
Should be but u need AOSP kernel and im not sure if there is one with MIUI support... if there is than yes it will work.
U can try Fennys but no garuntee
Click to expand...
Click to collapse
i'll give it a shot thank you.
afrojoc said:
i'll give it a shot thank you.
Click to expand...
Click to collapse
Theres a button for that Thanks
Can't seem to get it working on redsurection v1.0 I'm extracting the kernal from aokp and replacing the resurrection zimage with it then flashing... is that okay? But anyways... it gets past the Samsung screen then just stays black
Sent from my GT-I9100 using xda premium
howtomen said:
Theres a button for that Thanks
Click to expand...
Click to collapse
Gave up because of the System UI crashes
Smacdallas said:
Can't seem to get it working on redsurection v1.0 I'm extracting the kernal from aokp and replacing the resurrection zimage with it then flashing... is that okay? But anyways... it gets past the Samsung screen then just stays black
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I couldn't get resurrection to boot either, but Batista's foxhound ROM did boot with fenny's kernel and the capacitive buttons worked - with the touch key file mod that howtoman posted in the instructions.
Sent from my SGH-I777 using XDA
dayv said:
I couldn't get resurrection to boot either, but Batista's foxhound ROM did boot with fenny's kernel and the capacitive buttons worked - with the touch key file mod that howtoman posted in the instructions.
Sent from my SGH-I777 using XDA
Click to expand...
Click to collapse
Theirs a new kernel posted in the ova kernel thread.. It's a tar.. I'll test it and report back
Sent from my GT-I9100 using xda premium
It works but the home and search key don't have haptic feedback.
Sent from my GT-I9100 using Tapatalk
MysticKing32 said:
It works but the home and search key don't have haptic feedback.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
You need to replace the whole folder I took it from CM9 and it works just fine
Sent from my GT-I9100 using Tapatalk 2 Beta-2
I was with 4.1.1 official firmware and today I flashed 4.1.2 for Germany through Odin.I've made 2 factory resets before and after the install.After that I started setting up my phone and I noticed that Wi-Fi is not working properly.And by that I mean that Wi-Fi is only connecting after I restart my phone otherwise it's obtaining IP adress but the phone disables it.I tried changing the channels on my router,tried restarting it and I even removed my security but it didn't work.My wi-fi connects only when I restart my phone.If I turn off the Wi-Fi I cannot connect untill I restart the phone again.I've read about a 100 posts about Wi-Fi problems but none of them worked.If anyone here can help me Please I would be grateful.
Flash the firmware again .
jje
JJEgan said:
Flash the firmware again .
jje
Click to expand...
Click to collapse
I did that a couple of times.I flashed the version for Poland and again that for Germany... And The problem is there again.
Ok I flashed 4.1.1 for Poland and updated through the Wifi and the effect was the same ... When phone started with 4.1.2 the Wi-fi could not connect because of poor connection to my router.
same problem here
Copy the etc/wifi/ folder from old version paste it to new version
Sent from my GT-I9300 using Tapatalk 2
wednesday13 said:
Copy the etc/wifi/ folder from old version paste it to new version
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
did this work? i have been experiencing with wifi connectivity for weeks now and i realized there are some selected wifi routers that disables my connection.. like our own home wifi and some free public wifis -_-
Yes it works on mine
Sent from my GT-I9300 using Tapatalk 2
wednesday13 said:
Yes it works on mine
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Can you explain how to do this cuz I downloaded some root explorer and found the folder but I cant copy it on my pc.
yea Plz explain I'm a newbie at this after I use the root explorer then what ? where is the old wifi folder
afkdante said:
yea Plz explain I'm a newbie at this after I use the root explorer then what ? where is the old wifi folder
Click to expand...
Click to collapse
The old one you used BEFORE u flash a new ROM
Sent from my GT-I9300 using xda premium
saywhatt said:
The old one you used BEFORE u flash a new ROM
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I didn't save that (
afkdante said:
I didn't save that (
Click to expand...
Click to collapse
Same here xD i didnt really bother anymore..
U can check my sig, i made a thread about it
Sent from my GT-I9300 using xda premium
I seem to have this problem intermittently even with the Foxhound ROM. I also don't have a backup of my stock 4.1.1. Any other solution for this?
Sent from my GT-I9300 using Tapatalk 2
hi my s3 optimize every boot some application (34) why ? as after wipe Dalvik cache. i use stock 4.2.2 stock root. thanks for help sorry for my english
Problem with rom (leak) or data.
Take titanium backup and nandroid backup.
Wipe via recovery
Manually install some of those 34 apps
Still happens? Change rom
Not happening, restore as little as possible
Sent from my GT-I9300 using Tapatalk 4 Beta
rootSU said:
Problem with rom (leak) or data.
Take titanium backup and nandroid backup.
Wipe via recovery
Manually install some of those 34 apps
Still happens? Change rom
Not happening, restore as little as possible
Sent from my GT-I9300 using Tapatalk 4 Beta
Click to expand...
Click to collapse
thanks now try and after supersu update from market triangle aways no work, no permission from supersu ????
Reboot?
Sent from my GT-I9300 using Tapatalk 4 Beta
rootSU said:
Reboot?
Sent from my GT-I9300 using Tapatalk 4 Beta
Click to expand...
Click to collapse
ok now is ok thanks. i wont change rom with cm or pa but when install it i have not data also after restore efs and install other modem.
Sorry I don't understand...
Sent from my GT-I9300 using Tapatalk 4 Beta
rootSU said:
Sorry I don't understand...
Sent from my GT-I9300 using Tapatalk 4 Beta
Click to expand...
Click to collapse
sorry, i wont change stock rom to cm 10,1 or paranoid android, but when flash i have no service and also after restore efs backup and install modem i have no data and no service you an help me? thanks
I wOnt or I wAnt?
Did you ever "unlock" your phone?
Sent from my GT-I9300 using Tapatalk 4 Beta
rootSU said:
I wOnt or I wAnt?
Did you ever "unlock" your phone?
Sent from my GT-I9300 using Tapatalk 4 Beta
Click to expand...
Click to collapse
sorry i want my phone is unlock is rooted and no brand
Did you unlock or factory unlock?
Sent from my GT-I9300 using Tapatalk 4 Beta
rootSU said:
Did you unlock or factory unlock?
Sent from my GT-I9300 using Tapatalk 4 Beta
Click to expand...
Click to collapse
sorry I do not understand can explain better?
uberto.costanzo said:
sorry I do not understand can explain better?
Click to expand...
Click to collapse
Did you buy it unlocked or did you unlock it yourself?
rootSU said:
Did you buy it unlocked or did you unlock it yourself?
Click to expand...
Click to collapse
ok i have buy unlocked and work only Samsung rom stock or based
uberto.costanzo said:
ok i have buy unlocked and work only Samsung rom stock or based
Click to expand...
Click to collapse
In which case not sure.
Calls work OK?
You check APN settings? Basic stuff like that? Test WiFi?
rootSU said:
In which case not sure.
Calls work OK?
You check APN settings? Basic stuff like that? Test WiFi?
Click to expand...
Click to collapse
wifi work, apn setting cm equal to sammy rom and in setting/ mobile network/apn there is nothing i set new apn but after not appear
now i am in stock 4.2.2 leaked, cwm recovery 6.0.32, cf autoroot, i install for example slim bean, wipe factory reset format system, flash rom, flash gapps, reboot and no service, restore efs and i have service only for 10 seconds, no service for 10 seconds and after..bla bla bla..mistery i speek whit my friend yank but your suggest is unavailing. I am a prisoner of samsung:crying:
When did you backup you're efs?
If it was after you flashed the rom it could be corrupt..
Sent from my GT-I9300 using xda premium
Hello, I just upgraded to Omni`s 4.4.2 ROM (nightly) and i`m trying to install Dorimanx` Kernell . But when i flash the Zip its giving a error
Flash aborted ,
Also i tryed to flash with Odin . After flashing with Odin , Phone stucks at Dorimanx boot Logo.
So i try-ed another ROM . and the Kernel it`s work with that ROM
Any Suggestions? how can i Run Dor`kernel with Omni 4.4.2?
Aithusha said:
Hello, I just upgraded to Omni`s 4.4.2 ROM (nightly) and i`m trying to install Dorimanx` Kernell . But when i flash the Zip its giving a error
Flash aborted ,
Also i tryed to flash with Odin . After flashing with Odin , Phone stucks at Dorimanx boot Logo.
So i try-ed another ROM . and the Kernel it`s work with that ROM
Any Suggestions? how can i Run Dor`kernel with Omni 4.4.2?
Click to expand...
Click to collapse
I don't think you can use the official Dorimanx kernel with Omni just as yet because it has not yet been made compatible with KK roms.
What version you are trying to use?
Aithusha said:
Hello, I just upgraded to Omni`s 4.4.2 ROM (nightly) and i`m trying to install Dorimanx` Kernell . But when i flash the Zip its giving a error
Flash aborted ,
Also i tryed to flash with Odin . After flashing with Odin , Phone stucks at Dorimanx boot Logo.
So i try-ed another ROM . and the Kernel it`s work with that ROM
Any Suggestions? how can i Run Dor`kernel with Omni 4.4.2?
Click to expand...
Click to collapse
You need dorimanx version 10, which has not been released officially (like said by the person above). This 10 version is aviable in the beta thread. Search for it, only if you now what you are doing.
Thank you guys. You helped me
Sent from my GT-I9100 using Tapatalk
Omni rom 29.12 build
Hi guys,Pls help me...
Transfer(copying) gets stuck when the screen goes off, When I transfer some obb files(game files) to internal sd folder (Android/obb) from the same internal sd files (emmc) using my device file manager...Is this for me or it is an known issue...pls can anyone confirm it
Im on official latest build Omni Rom
_Atom_ said:
Hi guys,Pls help me...
Transfer(copying) gets stuck when the screen goes off, When I transfer some obb files(game files) to internal sd folder (Android/obb) from the same internal sd files (emmc) using my device file manager...Is this for me or it is an known issue...pls can anyone confirm it
Im on official latest build Omni Rom
Click to expand...
Click to collapse
I have a similar experience with CYANOGENMOD 11 by infected_:
JavaScout said:
External storage has some issues: it's impossible to copy great amount of files ( 600+ ) with total size of 1.4GB+.
I've tried copy from external sdcard to pc over both, mtp and usb protocols. The operation always gets stuck after a couple of files. The same behavior detected when trying to copy files locally, when using file manager. I've tried to copy from external sdcard to internal - useless. Fails after a couple of files.
Click to expand...
Click to collapse
Imho, it has nothing to do with the screen being dimmed.
JavaScout said:
I have a similar experience with CYANOGENMOD 11 by infected_:
Imho, it has nothing to do with the screen being dimmed.
Click to expand...
Click to collapse
Thanks for the reply...one last question. Does slimsaber 4.4.2 has this problem that I have mentioned
Sent from my GT-I9100 using Tapatalk
_Atom_ said:
Thanks for the reply...one last question. Does slimsaber 4.4.2 has this problem that I have mentioned
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
I can copy a file (200mb) without any problems. (sorry don't have bigger files at the moment.)
Sent from my GT-I9100 using Tapatalk
Christiaan91 said:
I can copy a file (200mb) without any problems. (sorry don't have bigger files at the moment.)
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Thanks...
Can u make a one more copy of the file u said..so that u will have 400mb ...now transfer the whole file and tell
Sent from my GT-I9100 using Tapatalk
_Atom_ said:
Thanks...
Can u make a one more copy of the file u said..so that u will have 400mb ...now transfer the whole file and tell
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Without any problems. From external SD to Android/obb/
Sent from my GT-I9100 using Tapatalk
Christiaan91 said:
Without any problems. From external SD to Android/obb/
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Thanks.a lot...is there any issues with copying large files bw internal sd to internal sd..but actually that was my question
Sent from my GT-I9100 using Tapatalk
_Atom_ said:
Thanks.a lot...is there any issues with copying large files bw internal sd to internal sd..but actually that was my question
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Haha oké. Also no problems. Btw I'm using root browser.
Sent from my GT-I9100 using Tapatalk
Christiaan91 said:
Without any problems. From external SD to Android/obb/
Click to expand...
Click to collapse
Maybe it's about the amount of files, and not the size. I was also able to copy 2 relatively big files under the same "problematic" rom. Try like 60-100 files with total size of 500+ MB, and I think you'll see it.
its possible Omni rom install in i9100???
JavaScout said:
Maybe it's about the amount of files, and not the size. I was also able to copy 2 relatively big files under the same "problematic" rom. Try like 60-100 files with total size of 500+ MB, and I think you'll see it.
Click to expand...
Click to collapse
No problems, tried it with music files.
morrismn said:
its possible Omni rom install in i9100???
Click to expand...
Click to collapse
Yes it's possible to install the Omni rom on an i9100.
Sent from my GT-I9100 using Tapatalk
morrismn said:
its possible Omni rom install in i9100???
Click to expand...
Click to collapse
Yes, see here.
Coming from samsung neat rom lite, I Installed latest version of omni rom 3.1.2013 build and also flashed pa mini gapps..and after flashing samsung logo is appearing again and again..hlp me pls
Sent from my GT-I9100 using Tapatalk
_Atom_ said:
Coming from samsung neat rom lite, I Installed latest version of omni rom 3.1.2013 build and also flashed pa mini gapps..and after flashing samsung logo is appearing again and again..hlp me pls
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Do a full wipe and install again.
Sent from my GT-I9100 using Tapatalk 2
_Atom_ said:
Coming from samsung neat rom lite, I Installed latest version of omni rom 3.1.2013 build and also flashed pa mini gapps..and after flashing samsung logo is appearing again and again..hlp me pls
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
In recovery perform wipe data and factory reset,reboot and wait for a few minutes to start using new custom os
Sent from my GT-I9100 using Tapatalk
corruptionfreeindia said:
Do a full wipe and install again.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Thanks a lot..I will try it
Sent from my GT-I9100 using Tapatalk
---------- Post added at 03:10 PM ---------- Previous post was at 03:03 PM ----------
@sharp87 , @corruptionfreeindia : omni rom started working in my i9100..thanks a lot..
is it necessary to do full reset when installing omni rom
Sent from my GT-I9100 using Tapatalk
after I upgraded to kit kat, seems I can no longer connect to my all share cast hub .. it's discoverable but when I connect it fails .. anyone else having this problem ... I can't find anything online about a fix either ... Thanks in advance. .. rooted 4.4.2 ... JB kit kat killer 1.0 ..twrp recovery
Edit :
this is what fixed mine being on a rooted custom rom Josh beach.. k3 1.0.0 .. 4.4.2
You'll need the stock kit kat kernel an be on kit kat 4.4.2 to get all share dongle to work
1.Download teamblaze rom
2. Go into twrp do an nan back up of your current rom (back up every option) boot .. efs.. modem .. data.. etc....
3. Go back to home in twrp .. Do a wipe /factory reset / advanced wipe .. wipe everything EXCEPT internal an external
4. Go back to home twrp locate an install/flash teamblaze rom (not gonna explain how to flash a rom).. you should get successful on screen if you flashed teamblaze rom correctly.. do not reboot system just yet
5. Go back to home twrp click backup (which is now teamblaze) .. ONLY SELECT " BOOT" OPTION (this is stock kernel which is required for all share cast dongle to work properly) an swipe .. Should get successful on screen
6. Go back to home twrp click restore .. locate the rom you restored at the beginning of this thread click on it .... UNCHECK ONLY "BOOT" OPTION an the restore ... DO NOT REBOOT YET
7. GO back to home twrp click restore an locate teamblaze .. click that .. Their should be a " boot " (that's the stock kernel ) swipe and reboot
Now you should have your rom of choice with stock kernel .. . This is what worked for me .. If you f**k up your phone is not on me js
I wanted to thank teamblaze rom for having stock kernel
Please leave a comment an let me know if this works for you guys
Sent from my SM-N900P using Tapatalk
chico260 said:
Well after I upgraded to kit kat, seems I can no longer connect to my all share cast hub .. it's discoverable but when I connect it fails .. anyone else having this problem ... I can't find anything online about a fix either ... Thanks in advance. .. rooted 4.4.2 ... JB kit kat killer 1.0 ..twrp recovery
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
This is what I was told " Always use stock Samsung software, if you are using a modified non stock software you will always lose the mirroring function. So I reflashed everything to stock and everything worked again and I hate being stock ?
Sent from my SM-N900P using XDA Premium HD app
I mirror my phone to my TV all of the time but my TV has the functionality built in so I don't use the dongle.. I'm rooted with custom software.
Sent from my SM-N900P using XDA Premium 4 mobile app
BrianBaker said:
I mirror my phone to my TV all of the time but my TV has the functionality built in so I don't use the dongle.. I'm rooted with custom software.
Sent from my SM-N900P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Which rom are you on I would love to know
Sent from my SM-N900P using XDA Premium HD app
Deleted
Edit : Solved my issue
chico260 said:
Edit : Solved my issue
Click to expand...
Click to collapse
Cool, How did you do it?
ooops just read first post!!
Or this maby.
http://forum.xda-developers.com/showthread.php?t=2681587
klibo84 said:
Or this maby.
http://forum.xda-developers.com/showthread.php?t=2681587
Click to expand...
Click to collapse
I actually tried it.. but it said patch not needed before I did it the way I posted.. Also .. it's not being rooted that breaks all share cast dongle connection .. it's the kernel from what I gather from reading
Sent from my SM-N900P using Tapatalk
chico260 said:
I actually tried it.. but it said patch not needed before I did it the way I posted.. Also .. it's not being rooted that breaks all share cast dongle connection .. it's the kernel from what I gather from reading
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
Ah well, I could not test hence the maby. I was hoping I had found you an easier way. So for users that the app says pach needed still worth a try. But if it says not needed back to OP.
EDIT: sorry not worth trying due to the kernel. I see.
joe1blue said:
Which rom are you on I would love to know
Sent from my SM-N900P using XDA Premium HD app
Click to expand...
Click to collapse
Im stock rooted
I'm on KitKatKiller with the Beastmode kernel and the Allshare Cast Dongle is working perfectly. You no longer need to be on stock kernel.
cmdauria said:
I'm on KitKatKiller with the Beastmode kernel and the Allshare Cast Dongle is working perfectly. You no longer need to be on stock kernel.
Click to expand...
Click to collapse
Which version... .6 ?
Sent from my SM-N900P using Tapatalk
chico260 said:
Which version... .6 ?
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
If you are asking which kernel...I am on the one that came with the rom...Version 3.4.0
I am still on version 1.0 of the rom.
cmdauria said:
If you are asking which kernel...I am on the one that came with the rom...Version 3.4.0
I am still on version 1.0 of the rom.
Click to expand...
Click to collapse
Kernel 3.4.0 is stock I believe .. whenever I flashed beastmode the kernel would say beastmode.. Maybe test 1.0 .0 k3 has stock
Sent from my SM-N900P using Tapatalk
chico260 said:
Kernel 3.4.0 is stock I believe .. whenever I flashed beastmode the kernel would say beastmode.. Maybe test 1.0 .0 k3 has stock
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
No it is beastmode... It says 3.4.0-beastmode freeza
I finally found a way for it to work download this*
Check out "Flashify (for root users)"
https://play.google.com/store/apps/d...llner.flashify
Then use this app to flash select boot image when flashing using flashify
https://www.dropbox.com/s/ky4m2fwobibh5je/boot.img*
Sent from my SM-N900P using XDA Premium HD app
joe1blue said:
I finally found a way for it to work download this*
Check out "Flashify (for root users)"
https://play.google.com/store/apps/d...llner.flashify
Then use this app to flash select boot image when flashing using flashify
https://www.dropbox.com/s/ky4m2fwobibh5je/boot.img*
Sent from my SM-N900P using XDA Premium HD app
Click to expand...
Click to collapse
That boot image link is custom kernel right ?
Sent from my SM-N900P using Tapatalk
chico260 said:
That boot image link is custom kernel right ?
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
No I think it's the stock kernel I think the stock kernel is the only kernel that will work with the screen mirroring feature.
Sent from my SM-N900P using XDA Premium HD app
joe1blue said:
No I think it's the stock kernel I think the stock kernel is the only kernel that will work with the screen mirroring feature.
Sent from my SM-N900P using XDA Premium HD app
Click to expand...
Click to collapse
Sorry I meant to say stock kernel
Sent from my SM-N900P using Tapatalk