I WAS HAVING GALAXY S2 JB 4.2 FOR GALAXY ACE.
I UNROOTED WID ODIN by the package S5830JPKS2_S5830OJPKS2_S5830XWKS2_HOME.tar.md5
the operation wass succes.
but it is not booting. the samsung logo comes
(the second animated logo) and continues. but the ui is not loading plas help
Go back to stock or install cmw and install new custom rom, its not bricked when bootlogo shows up
Sent from my LT26i using xda premium
thanks
milad407 said:
Go back to stock or install cmw and install new custom rom, its not bricked when bootlogo shows up
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
but i have done it simply and worked. b4 u posted the comment. but anyway thanks
Related
I have galaxy ace s5830 its stuck on Samsung screen and the same samsung logo keep repeating it happens when i factory restore my phone which is rooted and i have formated the SD card before doing this. Now some please help should i flash another Stock rom over it.
I think u should go to recovery mode then again factory reset and wipe dalvik cache with it
Yup i have already done this all gone into vain. should i go with ODIN
Wipe cache partition
Or
reflash stock rom with Odin :thumbup:
Sent from my GT-S5830 using XDA
Reflash stock ROM with ODIN...your phone will surely boot then properly..
and also give it a little time to boot up...
I have a same problem..
Allready done all but the result still same..
Why??
Sent from my GT-S5570 using XDA
Okay i have flashed with ODIN following the steps given on some other forum now phone is working fine, But i didn't like this Stock rom can you tell me which Stock rom is best For ENGLISH .
Change the language for Goddsakes..and u have a stock ROM with ENGLISH!
---------- Post added at 10:08 AM ---------- Previous post was at 10:07 AM ----------
sengalsesama said:
I have a same problem..
Allready done all but the result still same..
Why??
Sent from my GT-S5570 using XDA
Click to expand...
Click to collapse
Mate i PMed u..did u get the reply??
go for stocklite v6. it's a great rom based on stock. you will surely like it
Try Sony HD v2 ...
Sent from my GT-S5830 using XDA
AnoopKumar said:
Try Sony HD v2 ...
Sent from my GT-S5830 using XDA
Click to expand...
Click to collapse
he asked for stock rom mate ;-)
Yeah i mean stock means stock, original rom, which region of stock rom from samfirmware i can download
HI everyone,
I need some serious help. please help.
Currently I have Galaxy S2- Gt-i9100 with Siyah kernel and CM9 rom but I want to go back to the same kernel and GB rom(or ICS) that galaxy S2 comes by default from Samsung (i guess it is called stock rom).
I don't know much about flashing etc. Can someone tell me how can i do that?
rythemofthe said:
HI everyone,
I need some serious help. please help.
Currently I have Galaxy S2- Gt-i9100 with Siyah kernel and CM9 rom but I want to go back to the same kernel and GB rom(or ICS) that galaxy S2 comes by default from Samsung (i guess it is called stock rom).
I don't know much about flashing etc. Can someone tell me how can i do that?
Click to expand...
Click to collapse
1. Download the original firmware for your country here: www.sammobile.com/firmware/
2. Extract the zip file
3. On your phone boot to CWM recovery
- wipe data /factory reset
- format /system
- boot to download mode
4. Flash the firmware via Odin.
Flashing Guide: forum.xda-developers.com/showthread.php?t=1075278
Sent from my GT-I9100 using Tapatalk 2
Jokesy said:
1. Download the original firmware for your country here: www.sammobile.com/firmware/
2. Extract the zip file
3. On your phone boot to CWM recovery
- wipe data /factory reset
- format /system
- boot to download mode
4. Flash the firmware via Odin.
Flashing Guide: forum.xda-developers.com/showthread.php?t=1075278
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Thanks, Would it un-root my phone too? and can I install GB after CM9? ..I am not sure how to do this
rythemofthe said:
Thanks, Would it un-root my phone too? and can I install GD after CM9? ..I am not sure how to do this
Click to expand...
Click to collapse
1. Yes it will unroot your phone.
2. What is GD?
Sent from my GT-I9100 using Tapatalk 2
Jokesy said:
1. Yes it will unroot your phone.
2. What is GD?
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Thanks ... Sorry it's not GD i meant GB.
I have Downloaded this GB and ICS firmware from SAMmobile..But i want to try install GB first, Can i do it directly over CM9? Wouldn't it brick my phone? Or some other steps has to be followed for installing GB?
rythemofthe said:
Thanks ... Sorry it's not GD i meant GB.
I have Downloaded this GB and ICS firmware from SAMmobile..But i want to try install GB first, Can i do it directly over CM9? Wouldn't it brick my phone? Or some other steps has to be followed for installing GB?
Click to expand...
Click to collapse
No problem. Gingerbread will work fine.
Just follow the instructions/steps in my first post on this thread.
Good luck
Sent from my GT-I9100 using Tapatalk 2
Serious help now.
Jokesy said:
No problem. Gingerbread will work fine.
Just follow the instructions/steps in my first post on this thread.
Good luck
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Hey..I tried the steps with GB firmware but now my phone is stuck at Loading logo and stuck in loop that keeps showing that Galaxy SII logo. Is my phone bricked now?
rythemofthe said:
Hey..I tried the steps with GB firmware but now my phone is stuck at Loading logo and stuck in loop that keeps showing that Galaxy SII logo. Is my phone bricked now?
Click to expand...
Click to collapse
boot to recovery and perform factory reset.
BTW, Did you miss step 3?
Sent from my GT-I9100 using Tapatalk 2
rythemofthe said:
Hey..I tried the steps with GB firmware but now my phone is stuck at Loading logo and stuck in loop that keeps showing that Galaxy SII logo. Is my phone bricked now?
Click to expand...
Click to collapse
Not if you have downloaded the correct software for the I9100. This sometimes happens. Can you get into recovery and download mode
Sent from my GT-I9100 using xda premium
Thanks
HANDSY said:
Not if you have downloaded the correct software for the I9100. This sometimes happens. Can you get into recovery and download mode
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Jokesy said:
boot to recovery and perform factory reset.
BTW, Did you miss step 3?
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Thanks guys for the hel...I dint missed anything..It ended up in loop then I went back to Download Mode and factory reset and it started fine.
Thanks a lot for help
Need help , after flash by ordin to stock 4.0.3 from jelly bean rooted rom . It stuck at Galaxy S ll there , can go to download mod & recovery mod . What should I do ?
Sent from my GT-I9100 using xda premium
boonkeat8 said:
Need help , after flash by ordin to stock 4.0.3 from jelly bean rooted rom . It stuck at Galaxy S ll there , can go to download mod & recovery mod . What should I do ?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Try a factory reset in recovery mode!
Hello guys:
I have flashed Ace-i-Sure from CWM and how to say the author, but I have waited 10 minuts and It stop in Samsung Galaxy Logo. Plaease helpme, I don't know what i do.
Regards
AW: [Q] Ace-i-Sure ROM Brick
Search before posting...
http://forum.xda-developers.com/showthread.php?t=1551156
Gesendet von meinem GT-S5830i mit Tapatalk 2
I have unbricked phone with CWM Restore. Do you recomend some ROM for me?
Yunito53 said:
I have unbricked phone with CWM Restore. Do you recomend some ROM for me?
Click to expand...
Click to collapse
Try going to Development section and check features of some ROMs and then try what you like
Why would you want our choice on your phone?
It's your phone and your choice
im using a mincr 2,8 an is estable and secure to flash
Sent from my GT-S5830i using xda app-developers app
Fix
I know this is an old thread but we had the same issue installing this ROM onto a device with STOCK firmware GINGERBREAD 3.2.6
Flashing using CWM the phone got stuck on the Samsung galaxy logo
ROM install without CWM in recovery bricked the device and it got stuck in boot-loop
The solution: After installing the stock ROM using Odin, make sure you have a clean install! (This is important) then wipe the data, cache and dalvik cache and proceed to flash ace-I-sure
As always before you do any of this make sure you use CWM to backup your phone to SD so you can roll back!
IF YOUR DEVICE IS BRICKED - USE THIS VIDEO TO RESTORE STOCK!
Cant post the link because I'm a new member - but search "Unbrick Ace 5830i via ODIN" the uploader is by Amritpal Singh
Cynosure Studios said:
I know this is an old thread but we had the same issue installing this ROM onto a device with STOCK firmware GINGERBREAD 3.2.6
Flashing using CWM the phone got stuck on the Samsung galaxy logo
ROM install without CWM in recovery bricked the device and it got stuck in boot-loop
The solution: After installing the stock ROM using Odin, make sure you have a clean install! (This is important) then wipe the data, cache and dalvik cache and proceed to flash ace-I-sure
As always before you do any of this make sure you use CWM to backup your phone to SD so you can roll back!
IF YOUR DEVICE IS BRICKED - USE THIS VIDEO TO RESTORE STOCK!
Cant post the link because I'm a new member - but search "Unbrick Ace 5830i via ODIN" the uploader is by Amritpal Singh
Click to expand...
Click to collapse
We all know that dude
It's from one of the stickies in Development Section
Hay guys I am noob here but I got same problem, is this rom
Need xxl2 firmware cause I have XXLI1 firmware? Something like that??
Sent from my GT-S5830i using xda premium
Its your phone its your choice.......heh heh heh.......class.:laugh:
Yunito53 said:
Hello guys:
I have flashed Ace-i-Sure from CWM and how to say the author, but I have waited 10 minuts and It stop in Samsung Galaxy Logo. Plaease helpme, I don't know what i do.
Click to expand...
Click to collapse
Switching between roms may softbrick your phone. If you are stuck at bootscreen while flashing, the solution may already specified in respected threads. There are 3 links specified in Ace-i-Sure ROM thread for solving stuck at boot logo.
Sent from my GT-S5830i using xda app-developers app
brijeshep said:
Switching between roms may softbrick your phone. If you are stuck at bootscreen while flashing, the solution may already specified in respected threads. There are 3 links specified in Ace-i-Sure ROM thread for solving stuck at boot logo.
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
Ah thanks! I have solved that problem. I have flashed with Ace-i-sure 10.0. But... One Question... This ROM drain very fast the battery. How can i solve it?
Yunito53 said:
Ah thanks! I have solved that problem. I have flashed with Ace-i-sure 10.0. But... One Question... This ROM drain very fast the battery. How can i solve it?
Click to expand...
Click to collapse
It's not the problem of rom.
Freeze Some apps like maps, YouTube... those are working as background apps.
Turnoff wifi, GPS, packet data when not in use.
Selecting 2G only will improve battery backup.
Set Screen brightness to minimum level.
Sent from my GT-S5830i using xda app-developers app
after falshing stock ICS 4.04 rom on my Samsung Galaxy S 2 ( SHW-M250S) i am stuck with a transparent like black screen with some info about the mobile (see the picture attached) .. .
can someone plz Help get out of this page
flash to stock jellybean
Ics is fault sometime so flash jellybean
Sent from my GT-S5360 using xda premium
john morrision said:
flash to stock jellybean
Ics is fault sometime so flash jellybean
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
ok Downloading now will try when finished
shohag_prince said:
ok Downloading now will try when finished
Click to expand...
Click to collapse
Good luck ....
If its work for pls press thanks button
Sent from my sam gal s2 using xda premium
i flashed the Stock JB but its stuck on Boot logo and in the stock recovery it shows something like unable to mount system ... ...
can u plz give the link for the pit file of SHW-E250S jelly bean i want to flash it before flashing the stock JB again . .. .
shohag_prince said:
i flashed the Stock JB but its stuck on Boot logo and in the stock recovery it shows something like unable to mount system ... ...
can u plz give the link for the pit file of SHW-E250S jelly bean i want to flash it before flashing the stock JB again . .. .
Click to expand...
Click to collapse
http://ilmubarokah.wordpress.com/20...-korean-version-shw-m250x-to-jellybean-4-1-2/ to this link
Sent from my GT-S5360 using xda premium