I'm trying to flash a ftf through Flashtool.
Starting flashboot mode (volume+ and plug usb)
Sending file
Asked to unplug and restart.
pressing volume- key and inserting usb. A green light comes on for about 10 seconds, then sony logo, then battery charger picture, and turns off
Is the battery to low or am I doing something wrong? Sony updater can't access phone either. Is it driver related?
It might be driver related.
Sent from my Desire S using Tapatalk 2
I manged to find problems with a driver in device manager right as I plug in the phone. SEMC Flash driver har a mark on it. What driver shold I use to it?
Edit usin w7 x64. Tried android_winusb.ini (modified for 64) but says it not compatible
I have same problem i think.
When I connect my phone turned on, everything's ok.
But when I go to flash mode, flashtool keeps telling me I don't have right drivers.
Strange fact is, that I flashed ICS using same version of flashtool on same PC 4-5 months ago
Sent from my XGO using fingers
Fixed it.
Installed all drivers again included in flashtool. Rebooted. And now it found right driver.
Edit: It worked one time, but flash failed. Now it has problem again with SEMC driver
Edit 2: Switched to another USB and it worked
SOLVED
drivers has new enemy!: windows 8!
starting to hate windows 8...
im going back to windows 7 32bit!!!
this is not the only driver issue that i have with this win8 64bit!!!
where can i get the drivers?
wesleyrc said:
starting to hate windows 8...
im going back to windows 7 32bit!!!
this is not the only driver issue that i have with this win8 64bit!!!
where can i get the drivers?
Click to expand...
Click to collapse
for win7 gordon gagmte drivers are good.
Sent from my ST25i using Tapatalk 2
Related
Hello,
i got a little Problem with my X10 (2.3.3 - rooted) and my Notebook (Acer - Win 7 64 bit).
I tried all ways to install the driver to use USB-Debugging but it won't install. The Device-Manager still tells me SEMC USB as unknown
I tried the usual way, start the phone with holding 'back', install the drivers manually...
Are there any other ways to get it working ?
Same goes for me,
Device manager states that the device is unknown, flashtool not working, PC companion no hope (connected to different USB ports including those of the motherboard).
it used to work but no chance now.
it charges normally from the USB (Orange LED) but would not connect to the PC.
Details:
Windows 7 x64
Gigabyte X58A-UD3R
Bootloader Unlocked Xperia X10 with 2.3.3 ROM and Doom's Kernel (the latest one)
The guy here says it is related to either windows windows update or faulty cable
http://android.modaco.com/topic/347751-flash-mode-not-working/
Didn't help...
But installing PC Companion did it
PC Companion install drivers automaticlly,that is the best solution.
RQ-1 said:
Didn't help...
But installing PC Companion did it
Click to expand...
Click to collapse
Sent from my xperia "z10i"
I tried removing and installing PC Companion but it didn't work either.
Any help guys?
Changing the computer had no effect as well
You must install SEUS ( Sony Ericsson Update Service ). Only SEUS will install right driver. Problem with SEUS is that when you look on SE official site, they tell you that SEUS for X10 no longer persist, and they guide you to PC companion which is crap.
Try this: try to connect your phone with PC, in flash mode. PC will try to install your phone driver but it can't find it. Then in Action Centar, on PC, (a small flag in sys tray, right down corner of a screen) find solution for this problem, and windows will automatically find SEUS over net. Install and enjoy.
from X10i via XDA premium
tried that but no luck as well (even in flash mode SEUS can not detect the device)
Thank you
hello i found a way and it worked for me download flash tool and extract it look for a folder called drivers in there u will find something called ggsetup-2.2.0.10
run this install it and all done
@huzi7868 thank you for your help
However, that didn't succeed and I reinstalled windows and drivers again, but still not working
Even no luck when the phone is in flashmode
Just tried it on a third Computer and checked the cable but the cable is working on another HTC Desire but not on my Xperia X10 (I mean my X10 cable), however they are both charging
try flashtools, there's a folder called 'drivers' in it, open it and click on the installer
a.monteiro said:
try flashtools, there's a folder called 'drivers' in it, open it and click on the installer
Click to expand...
Click to collapse
I agree, I also have solved in this way.
Download the latest version of Flashtool and after installing it you will find in the "drivers" folder the file "Flashtool-Drivers.exe".
Run it and select the drivers you need. Then connect again your Xperia X10
I really appreciate your help, but I had done that 3 times and on different computers but "USB Device not recognized"
As I sad before, use SEUS to install SEMC USB DRIVER. I have win 7 64bit, and I install driver on it. First, install Update service. When its finished, start Update Service and follow instruction (check "Licence Agree" button, and click next, then pick your phone, X10i I suppose, be carefull there is two X10, One is X10, and other is X10 SO-01b. I pick X10 for myself, and press NEXT. Turn off your phone, press and hold BACK button on phone while connecting with PC via USB. HOLD till you see message to release BACK button. Till then your driver will be installed.
Download SEUS from here http://www.megaupload.com/?d=SBDVZ3DG
@Dzufa Thank you, but I had done that before and tried it again, whenever I connect the phone pressing the back button the green LED illuminates and "USB device is not recognized" appears and nothing happen after that, SEUS just behaves like nothing is connected.
Try with this one. And I think you must be online, because SEUS must download some files.
I really did that and of course updated SEUS, as I said green LED illuminates and nothing happens even in flash tool (it used to work for ages but suddenly it stopped, it only charges)
BTW, I had flashed many kernels and ROMs before it happened so I am quite familiar with flashtool and SEUS, I unlocked the bootloader using 9lucas method and it worked after that I installed XSP ROM and the USB worked as well, however after 2 weeks or so, one day I left it connected it to the PC and I found that the phone turned off and refused to power on, I left it for a while in the charger then powered it on and it powered on, then it has refused to connect to the PC through USB since then.
Hello, I can not enter fastboot (or flashboot) mode on Xperia U, I want to unlock bootloader, I got unlock code from sonymobile website, I am following instructions , but I can not get in fastbot mode anyway,
When I turn of the phone, and press volume up and power button simultaneously while plugging phone to laptop, in device manager new unknown fastboot device apair, but for few seconds, I can ot install android_winusb.inf either, it says, that windows could not find any drivers.
Anyway, after few seconds unknown device disrepair and phone goes to charging.
Android version 2.3.7
windows version win7 ultimate sp1 64 bit (may be this is the problem?)
http://forum.xda-developers.com/sho...sible+solution+for+fastboot-windows7+problems
I Installed flashtool and flashtool drivers for it and finally entered in fastboot mode
Problem is solved
Funny thing is, that it still not works with Sony's original micro USB cable, but works perfectly with Samsung's cable
Windows treats every USB port independently. So windows has to "install" the driver again for every new USB port used. If you connect the Sony USB cable to the port the Samsung is currently connected to it should also work for the Sony cable.
Sent from my ST25i using xda app-developers app
I had this problem with fastboot but after a few reboots it worked, hate windows 7 :/
giokiborg said:
I Installed flashtool and flashtool drivers for it and finally entered in fastboot mode
Problem is solved
Funny thing is, that it still not works with Sony's original micro USB cable, but works perfectly with Samsung's cable
Click to expand...
Click to collapse
Can you help me how you did it using flash tools?
Well here's the problem which is quite awkward.
I installed CM9 on my Sony Xperia GO from freexperia project. It worked really great. :good:
the issues is, however, after 3rd time I installed CM9 (I was trying to get CM10 FXP on this device), my PC won't recognize the USB device( i.e. my phone). I am pretty sure I followed all the steps, I wiped the phone after installation everytime. I have MTP (setting>storage>MTP).
I have all the drivers re-installed on my laptop (running on Windows 7). I have tried another USB cable as well. tried all the USB ports.. but I can't make this machine recognize my phone.
and please considering my expertise level, start from level 0.
a big thanks in advance!!
dranzer_hunt said:
Well here's the problem which is quite awkward.
I installed CM9 on my Sony Xperia GO from freexperia project. It worked really great. :good:
the issues is, however, after 3rd time I installed CM9 (I was trying to get CM10 FXP on this device), my PC won't recognize the USB device( i.e. my phone). I am pretty sure I followed all the steps, I wiped the phone after installation everytime. I have MTP (setting>storage>MTP).
I have all the drivers re-installed on my laptop (running on Windows 7). I have tried another USB cable as well. tried all the USB ports.. but I can't make this machine recognize my phone.
and please considering my expertise level, start from level 0.
a big thanks in advance!!
Click to expand...
Click to collapse
Try with latest flashtool mate. Connect your phone with USB debugging activated and from flashtool go: Devices-> check drivers. Could work.
No, didn't work
DaRk-L0rD said:
Try with latest flashtool mate. Connect your phone with USB debugging activated and from flashtool go: Devices-> check drivers. Could work.
Click to expand...
Click to collapse
thank you, I am using flashtool ver 0.9.11.0 (I guess latest one). But, it didn't help.
dranzer_hunt said:
thank you, I am using flashtool ver 0.9.11.0 (I guess latest one). But, it didn't help.
Click to expand...
Click to collapse
Did you try connecting your phone on fastboot mode and install drivers from control panel?
Yes, but there is no prompt for missing drivers
DaRk-L0rD said:
Did you try connecting your phone on fastboot mode and install drivers from control panel?
Click to expand...
Click to collapse
I tried to connect phone in fastboot and flashboot mode, however, there was no notification for missing drivers. Only the blue light on phone turned to red after sometime ( and green for flashboot mode). I had similar problem earlier as well (not the same one), back then the PC used to show that driver was missing for fastboot. I simply used to go to flashtood>Driver folder and used to install the drivers. It worked earlier. Not anymore though.
Could there be possibility that I messed up (during installation somehow) some phone file which accounts for connectivity with the system?
do you or anyone know which files in phone are responsible for such functioning?
USB not responding
Have you tried using a different USB-port on your PC?
Under Windows XP i have to reinstall all drivers when connecting a device to a different USB jack.
sorry for later reply
_Agility_ said:
Have you tried using a different USB-port on your PC?
Under Windows XP i have to reinstall all drivers when connecting a device to a different USB jack.
Click to expand...
Click to collapse
I think I tried everything. The weird thing is that the same system with same USB with same port sometimes reads the USB driver. but, when I restart the phone in bootloader mode, it doesn't recognize the drivers again. However, this sometimes is very rare, since the last message, perhaps 2 or 3 times.
Could it be possible that there have been any hardware issue?
Hi, I need help with my Xperia Go since my power button has stopped working and I used to turn on my device via fastboot with flashtool on windows 7 32bit. Now I have Windows 8.1 64bit and I can't even install fastboot drivers. I get error when installing them:
Google, inc. (WinUSB) AndroidUsbDeviceClass (12/06/2010 4.0.0000.00000).
Thanks.
Edit: Ok, I got fastboot drivers installed somehow, now I cant see my device in flashtool. When I boot my xperia to fastboot, it stays there only few secs.
Are you using USB 2 or 3 ports?
Someone posted working drivers for USB 3 on windows 8.1 running on Intel chipset, search the forum.
ChikeD said:
Are you using USB 2 or 3 ports?
Someone posted working drivers for USB 3 on windows 8.1 running on Intel chipset, search the forum.
Click to expand...
Click to collapse
I have USB 2.0
Method
Xperiagouser said:
Hi, I need help with my Xperia Go since my power button has stopped working and I used to turn on my device via fastboot with flashtool on windows 7 32bit. Now I have Windows 8.1 64bit and I can't even install fastboot drivers. I get error when installing them:
Google, inc. (WinUSB) AndroidUsbDeviceClass (12/06/2010 4.0.0000.00000).
Thanks.
Edit: Ok, I got fastboot drivers installed somehow, now I cant see my device in flashtool. When I boot my xperia to fastboot, it stays there only few secs.
Click to expand...
Click to collapse
disable driver signature enforcement in windows then install drivers using the package given in flashtool or u can install SUS as it installs fastboot drivers by itself. But before anything it is recommended you ,uninstall the drivers which you have currently
sorry cannot post guide as per xda rules
Sorry, ive found a similar thread at http://forum.xda-developers.com/showthread.php?t=2820018. So the situation:
1. Download PC Companion and pc companion tells me to update.
2. Download finished, and its asking me to hold back key and plug the usb simultaneously.
3. I know im supposed to wait the green led, but it doesnt stay on, it flashes about 0.1 sec then turns off.
4. It then showed SE logo and showed the battery charging.
5. Update Service also not working.
6. Flashtool: Not working.
7. I know that S1Boot driver is installed, because ive flashed a lot of phones over and over again, only this MT15i failed.
8. The phone is definitely UNROOTED and still on LOCKED. And i plan to let it stay that way until its been updated to stock ics .587.
How can i access flashmode / fastboot without pressing those keys?
No, adb not working.
And now, the phone seems stuck at that SE logo. Waiting for half an hour now, no reboot, just that logo.
Ive heard about the need to use OctopusBox, JTAG and the like, but i want to refrain from using them. (Paid service, not sure if it would work at all)
System: XP SP3 32bit, Win7 32bit, Win7 64bit, Win8 64bit (with disabled signed driver enforcement)