[Q] CWMT no start - AT&T HTC One (M7)

Hello
got my HTC ONE from AT&T . Want to get a rid of the ATT Bloatware and restrictions (Thethering) ASAP.
SIMUnlock and ROOT everything easy and fine
Used the AOI KIT (Hasoon 2000) and also instaled the CWMT . Also tried the CWM
After start into the Bootloader menu after i flashed the CWMT/CWM the option "Recovery" was there.
Go to recovery the Phone starts and no Recovery mode to make a backup etc.
What I'm doing wrong.
Also can get into the Bootloader only Switch off the phone and as soon the screen gets dark press VOL down and then it goes into the bootloader. From the Phone beeing toatly OFF i can't get into the bootloader either
Could that be an AT&T issue ?
Thanks

[
I flashed another CWM and after a new restart it worked also the startup into the Bootlooder with Power and Vol Down

Related

[Q] will not boot white screen (no logo)

Hi i have a titan which is a demo
I want to flash the rom to a non demo version
The phone would not go into boot loder vol Up / Down
It did go ito boot ????? by pressing the vol down and power settings i have never seen before
I think i have changed something in there as it would not exit so battery out.
NOw all i get is a white screen.
However i now get the boot loder to work VOl Up / DOwn so flashed the spl_2.6.160015.3_WWE with no problems but the phone still will not start
Help !!!
problem solved it let me flash a new rom
'IMG_Eternity_HTC_Europe_1.08.401.02_Radio_16.23.02.09_2_16.24.00.23U_Signed_ETERNITY_RELEASE.nbh'
now its booted
Maybe try a hard reset? if not then have no idea other than try to re-flash, Is the ROM you are flashing a valid one for the handset/carrier? Normally invalid vendor id comes up but it may be something simple.
Well done! simple solution.

[Q] Phone not Displaying recovery menus

Hi all,
During LGNPST my laptop got stuck and now my phone doesn't displays anything till it boots to lock screen. I now want to install LG kitkat in my phone, so can someone upload a snap of each steps that are done in recovery here so that I can install kitkat.
I have ATT LG E970 curently running on stock 4.1
No one interested in helping me out?
i hope someone help you ... i have similar issue
Someone pls help us out
prasannapmv said:
Someone pls help us out
Click to expand...
Click to collapse
you have flashed the stock ROM via LGNPST bro , so your bootloader is locked & recovery has been replaced with stock recovery,
just root it again & then unlock the bootloader via FreeGee app from playstore
prasannapmv said:
Hi all,
During LGNPST my laptop got stuck and now my phone doesn't displays anything till it boots to lock screen. I now want to install LG kitkat in my phone, so can someone upload a snap of each steps that are done in recovery here so that I can install kitkat.
Click to expand...
Click to collapse
Does not seem that you have used the usb cable that originally came with your e970. If so then use the original lg usb cable. gain connect your phone to download mode and LGNPST. If you face errors try 2/3 times and dont forget to do a factory reset b holding power and volume down key. Update us if this helped.
everything work good guys, I have used original cable for flashing and have done 100% LGNPST second time. But because of some reason the screen remains black untill android lock screen comes. I just want a steps of flashing a custom rom, you can think like a blind man doing it you need to guide me with a very small thing.
prasannapmv said:
everything work good guys, I have used original cable for flashing and have done 100% LGNPST second time. But because of some reason the screen remains black untill android lock screen comes. I just want a steps of flashing a custom rom, you can think like a blind man doing it you need to guide me with a very small thing.
Click to expand...
Click to collapse
Install FreeGee & use it to unlock your bootloader & flash recovery
OMGMatrix said:
Install FreeGee & use it to unlock your bootloader & flash recovery
Click to expand...
Click to collapse
I can install freegee and unlock bootloader but the problem is because of some unknown reason my phone is not displaying anything. I don't see lg logo I don't see ATT boot screen. Display turns only when android lock screen comes.
prasannapmv said:
I can install freegee and unlock bootloader but the problem is because of some unknown reason my phone is not displaying anything. I don't see lg logo I don't see ATT boot screen. Display turns only when android lock screen comes.
Click to expand...
Click to collapse
that doesn't make any sense.
Because if you can install freegee, it means you were able to boot your phone past both logos.
So can you turn on your phone and if not it may be bricked.
If you did unlock the bootloader, all you have to do is when your phone powers up, hold the power + voume button and it'll display the fastboot menu. From there press the volume button down twice and then press the power button. Then you can boot into the recovery and install any rom you like.
If your trying to install a kitkat rom, you need to install a kitkat compatible recovery.

ROM\bootloader corrupt

Hi everyone
I have installed custom ROM and CWM recovery from another forum(which is currently unavailable)
Phone worked perfectly a couple of months, then it turned off and i couldn't turn it on.
Phone repair service recommended to change motherboard, but i refused and took phone back.
Fortunately, i could enter bootloader menu after that :victory:
But still some problems exist:crying:
Problem1:
when i turn phone on, it shows HTC logo for some time and then turns off.
Problem2:
when i enter bootloader menu and try to enter Recovery - phone shows screen with HTC logo and warning "This build is for development purposes only..."
Seems that i need somehow to restore Recovery and then try to flash new firmware.
Or maybe there is some method to flash ROM directly from PC(via fastboot), i tryed to flash Recovery, but no result
Thanks in advance and sorry for my english

htc m9 root help

Is there a rooting section or something? I feel as if this may be in the wrong section (if so, please move it thanks)
So, today, I decided that I wanted to unlock, root, and install a custom ROM on my htc m9. Now, on my previous phone, I only rooted and installed a custom kernal, all of which were apps that I used on my phone to do all the work. for the m9, there are no apps that root the phone for you so I looked up a few tutorials. (I'll list what I did in case you find something I did wrong
list of my guides :
droidviews.com/root-htc-one-m9-marshmallow
.droidviews.com/how-to-root-htc-one-m9-and-install-twrp-recovery-on-it/
and I used htc dev to unlock my phone's bootloader
unlocking my bootloader.
Unlocking my bootloader was successful, when I go into download mode (the black screen to be clear) it says unlocked
installing twrp
There was a lot of issues when installing since all but one of the guides kept saying go into bootloader mode, bootloader mode this, bootloader mode that (which is the white screen). After some searching, I realized that they really meant download mode... two different things... I believe twrp was successfully downloaded since I am able to access twrp when I go into bootloader mode, then recovery mode, and I end up in twrp.
rooting
so, according to the guide, I move the supersu zip files into my internal storage (anywhere). then go into twrp, press install, select the zip file, then swipe to flash.
well, I did just that, however, when I go to turn on my phone, I get stuck on the htc load screen, It's not a boot loop, it's just that white screen that says htc... I can't do anything else. holding down the power button does nothing (even for 10 seconds)... update, after typing this, I get a nice animation, then I'm stuck on the white screen that says htc one...holding the power button again does nothing, power button, and volume down does nothing... I think if I hold the power button and volume up, I turn off the phone, meaning I can access download mode, boot loader mode, etc. So... now what? clearly, following instruction has got me not where (bummer) and my lack of experience has also gotten in trouble (it could be worse? right?) what can I do to fix this?
note: my previous phone, I soft bricked it and I was able to flash the stock rom with LG flash tool, but there's no such thing as htc flash tool...

Switched ROMS (Evolution X -> Nusantara) -> NOW Bootloop

Hi Community,
I read some posts how to fix my Problem, but i cant go to a service Point.
So I was using the Evolution X for a long Time (Installed with TWRP 3.1.0).
And now i wanted to change to the Nusantara Project (Vanilla), I did a clean Flash, everything worked i could access the System.
Than i had problems installing Play Store, so i rebooted into Recovery via the System. But now im Stuck in the Loop.
Can i Somehow connect my Phone to the PC and Reset?
Can someone tell me if i Hard/soft bricked my phone ?
Just a little advice, would be really appreciated.
Thanks a lot
Go to TWRP, wipe system, cache, data and dalvik. Now flash nusantra and whichever GApps are recommended for it (if there are no recommendations then use OpenGApps, make sure the architecture is correct). Now wipe dalvik and restart. Sometimes, certain roms begin to bootloop if you boot into the rom first, then try to install gapps later.
If you still have issues, just reflash the stock rom.
I cant access the TWRP anymore, im just stuck on the Bootloader, no matter how i turn on The Phone (Volume Up + Power ON ), (Volume Down + Power), (All 3 Buttons)
Nothing works anymore i dont understand ....
Im searching the net but i cant go to fastboot or something else, its just keeps on rebooting ...
So it's bootlooping, but you cant access recovery?
When the screen turns off, press the key combo and it should go to recovery.
Your best bet is to take it to a service centre, but if that really isn't possible for you, then wait for its battery to drain completely, then when you plug in the charger, instead of turning the phone on, press the key combo to enter the recovery. From there, wipe and flash some other OS.
I've also heard that certain versions of TWRP don't support some roms, leading to a bootloop. In that case, you'll have to use orangefox recovery to flash the rom (orangefox is flashable via twrp)
Yes its Bootlooping.
When i turn it on, on the Left Corner "Recovery Mode" blinks for one second. Than the usual Text appears:
"Orange State
Your Device has been unlocked and cant be trusted
Your Device will boot in 5 Seconds".
So after a couple of seconds (around 10-20 sec)
It turns off and immediately on again. I Just can turn it OFF when i hold all 3 Buttons.
Than i try starting it with Volume up + Power / Volume down + Power, But i cant access Recovery or TWRP.
So i should wait til the battery gets low and try it again ?
Like i said, my custom Rom (Evolutionx) and TWRP just worked fine. I dont know man ...
Well since your bootloader is unlocked, try flashing the stock rom again. Look for a tutorial and follow it.
Hi I managed to unbrick my device with this guide, and im back on a stock rom
Unbrick
i ran following commands to get to my custom rom:
I run adb reboot bootloader,
add executed following commands.
(Pitch Black recovery 3.1)
- adb reboot bootloader
- fastboot flash recovery recovery.img
-fasboot reboot recovery
It just hang up and booted after a while into the normal system.
But im not able to get to the recovery menu ?
When I restart and hold Volume up + Power, i go in a loop and the phone keeps restarting over and over again.
what have i Fu**ed up ?
Do i need another recovery tool ?
sorry guys, i appreciate your help a lot tho !
EDIT: Is my bootloader unlocked ?
I can access via "adb reboot bootloader" the phone
and on the blackscreen on the phone it is written:
oppo verfiy pass
fastboot_unlock_verify ok
Update:
So i tried some Stuff and i got Red State. No Problem i Unbricked it once again and now im on Stock Android 10.
Now im Trying to enable the bootloader again.
I downloaded the In Depth Test_Realme_6.apk but i keep getting the Error that i should update the system.
So should i update the system ?
I cant find a CURRENT Tutorial to make this work, please help...
If you cant find a tutorial for your version, why not downgrade back to a previous one if possible.

Categories

Resources