Hi!
I have CyanogenMod 7.1.0 MadTeam rom on my Galaxy 5 GT-I5500. Sometimes when I turn off the screen and if I wanna turn it back on then I can't. I push all the buttons but the screen just won't wake up. I just have to take the battery out. Should I install newer CyanogenMod 7 Rom?
jeremin said:
Hi!
I have CyanogenMod 7.1.0 MadTeam rom on my Galaxy 5 GT-I5500. Sometimes when I turn off the screen and if I wanna turn it back on then I can't. I push all the buttons but the screen just won't wake up. I just have to take the battery out. Should I install newer CyanogenMod 7 Rom?
Click to expand...
Click to collapse
THis isn't probably not a bug at all
It's just if you are running a programm which used alot of memory, it'll take some time to "start" the lockscreen progress. Just press it once (more times will freeze your device) and wait a little bit. If this don't work try to reflash
Related
Dears,
I just installed the nightly for CM9 on my 10.1 GT-P7500, and the device is taking quite a while to boot, +40 minutes so far and nothing happened till this moment.
is this normal behavior?
How to solve this problem if I don't have backup on device?
long press power button until tab turns off, then go to recovery and wipe data/cache/dalvik cache, re flash cm9 and gapps.. it should take a couple of minutes to boot the first time.
If that does not work, restock via odin then try again..
Enviado desde mi GT-P7500 usando Tapatalk 2
jannoud said:
Dears,
I just installed the nightly for CM9 on my 10.1 GT-P7500, and the device is taking quite a while to boot, +40 minutes so far and nothing happened till this moment.
is this normal behavior?
How to solve this problem if I don't have backup on device?
Click to expand...
Click to collapse
40 minutes is a long time, but I'd wait an hour or so. I think my tab took over half an hour on first boot.
Missed GApps flash ...
Hi,
I just flashed my Galaxy Ace with CM 10.1 RC 4 ROM. However, I forgot to flash GApps.
And now the boot screen of CM has been stuck for a very long time. Is it the cause of the problem?
And if my phone boots, will I be able to load GApps to SD card again and flash it alone later?
Please help.
Thanks.
I just installed Galaxy Task 14 slim coming from CM10 Upgraded cwm to newest through Odin Flashed made a backup and installed Worked great for a few minutes Tried front and back cam out then out of nowhere the screen turned scribbled I cant see nothing not even power off or reboot buttons what do I do?
Galaxy Tab 10.1 p7510wifi
JavaKid said:
I just installed Galaxy Task 14 slim coming from CM10 Upgraded cwm to newest through Odin Flashed made a backup and installed Worked great for a few minutes Tried front and back cam out then out of nowhere the screen turned scribbled I cant see nothing not even power off or reboot buttons what do I do?
Galaxy Tab 10.1 p7510wifi
Click to expand...
Click to collapse
I rebooted and it seems to come up right will someone with more experience please elaborate on what may have been the cause so I can fix whatever happened.
EDIT: Keeps coming back eventualls flashing another kernal now. Any info would be great thanks.
Also tried installing CM10.1 newest out.... Same issue distorts screen with horizontal lines then just kept doing it....Had to restore twice from recovery only one rom works what up? Am I alone in this?
The only stable kernal is 2.6.36.4 but when I flash it doesnt take for newer builds...... Does anyone have the answer? If I dont put the tablet to sleep it works fine once awaken from sleep its scrambled again???
FIXXXED!!!!!!!!!!!
JavaKid said:
I rebooted and it seems to come up right will someone with more experience please elaborate on what may have been the cause so I can fix whatever happened.
EDIT: Keeps coming back eventualls flashing another kernal now. Any info would be great thanks.
Also tried installing CM10.1 newest out.... Same issue distorts screen with horizontal lines then just kept doing it....Had to restore twice from recovery only one rom works what up? Am I alone in this?
The only stable kernal is 2.6.36.4 but when I flash it doesnt take for newer builds...... Does anyone have the answer? If I dont put the tablet to sleep it works fine once awaken from sleep its scrambled again???
Click to expand...
Click to collapse
Did not realize this help section was so dead...... Anyways a few hourse later I discovered this thread pertaining to the issue... Should have a sticky or something its rather important so you don't think your tab is junk. For anyone having this issue go to http://forum.xda-developers.com/showthread.php?t=1975407
Cleared the issue right up I am on the latest cm build and running great no more sleep scribble display crap.
Yesterday I had finished compiling a android 4.2 rom for my device. The problem is that the screen would go to sleep without warning and i'd have to press the power botton multiple times to wake it. Also it would rambomly reboot after about 5 to 10 minutes. Can anyone help me fix. I really want to make this stable.
Hi guys. It is my first time to run cyanogenmod on my phone. I have the Samsung Galaxy Exhibit 2 4G and I tried to install the CM 11 of jfbs. I did all the backups and I wiped the data and cache and installed the ROM and Gapps. But I rebooted my device and the Cyanogenmod logo appeared with the spinning arrow and it didn't want to stop spinning (or loading if you want). My phone was stuck on logo and the spinning arrow. I forced the phone to turn off and when I rebooted it I worked but after a little time it went back to the logo and the spinning arrow. I re-installed the ROM and Gapps but like before, the logo and the spinning arrow still there until now and it won't even stop and lead me to the lock screen. PLEASE can somebody tell me if it won't work or what is wrong whit it or if it is matter of time, how long should i wait? PLEASE I need to know what is going on and what to do. :crying:
theking1st said:
Hi guys. It is my first time to run cyanogenmod on my phone. I have the Samsung Galaxy Exhibit 2 4G and I tried to install the CM 11 of jfbs. I did all the backups and I wiped the data and cache and installed the ROM and Gapps. But I rebooted my device and the Cyanogenmod logo appeared with the spinning arrow and it didn't want to stop spinning (or loading if you want). My phone was stuck on logo and the spinning arrow. I forced the phone to turn off and when I rebooted it I worked but after a little time it went back to the logo and the spinning arrow. I re-installed the ROM and Gapps but like before, the logo and the spinning arrow still there until now and it won't even stop and lead me to the lock screen. PLEASE can somebody tell me if it won't work or what is wrong whit it or if it is matter of time, how long should i wait? PLEASE I need to know what is going on and what to do. :crying:
Click to expand...
Click to collapse
(as a dev for this phone)
If you could PM me with more details that would be helpful. When i hear that it continues after a reboot(not the first person to have said that) i think its that you are not waiting enough time. That may or may not be the case. I would give it a good 5 min. I have never timed mine but it does seem to me that prior android versions took about 2-3min maybe and for w.e. reason android 4.4(cm-11.0) takes a few more min. Anything over >=10min though id say is too much. In these cases the only things that can really help are logs. Logs are the only way you can show a dev what you are experiencing.
(as a xda member)
Also i would use the device thread not the general android thread, read through the rom thread of the rom you are tryng to install, and a last and final note, I would recommend that anyone that is new to install older more mature roms first. These roms will yield the best experience in most cases. Then once you are familiar you can experiment with other roms/mods etc etc.
cars1189 said:
(as a dev for this phone)
If you could PM me with more details that would be helpful. When i hear that it continues after a reboot(not the first person to have said that) i think its that you are not waiting enough time. That may or may not be the case. I would give it a good 5 min. I have never timed mine but it does seem to me that prior android versions took about 2-3min maybe and for w.e. reason android 4.4(cm-11.0) takes a few more min. Anything over >=10min though id say is too much. In these cases the only things that can really help are logs. Logs are the only way you can show a dev what you are experiencing.
(as a xda member)
Also i would use the device thread not the general android thread, read through the rom thread of the rom you are tryng to install, and a last and final note, I would recommend that anyone that is new to install older more mature roms first. These roms will yield the best experience in most cases. Then once you are familiar you can experiment with other roms/mods etc etc.
Click to expand...
Click to collapse
Thank you @cars1189 for your answer. I used the device thread to do it but the problem is, I let it spinning for more than 5 hours. I have flashed many roms in my phone since i had it (more than 10 times or more) and i know that it does not take more than 10 mins max to install. But don't worry after that i went back and restored my previous CM 9 rom and right now i'm on the CM 11 build of 1-29-14 of your CM mass thread. It works fine, not at 100% but it doesn't drain my battery like your CM 10.2 build of 1-11-14 and it is almost stable. I will try tonight to use your ADC kernel with the jfbs CM 11 rom that first didn't work for me because I saw in your thread that this kernel may help it to load and install without the spinning issue. So i will give it a shoot. But anyways thanks for your answer and it means a lot to me really. :good:
GOOD
@cars1189 , I'm actually running the 6-18-14 build of CM11 and as far as it goes, i'm not encountering any major issue at the moment. The theme engine is working fine for me and battery life is great for my usage. I use this build as a daily driver, and it does a great job. Calls, texts, data, wifi, Bluetooth and GPS are all working. I had issues before with the amount of RAM available, but now that it has 375MB of RAM, it is more snappy. Just :good: Thank you for your work on our to make our phone still valuable today!! THANKS MAN!!!!!!
I have wake delay issue.When try wake with power button then wake 7 8 seconds later.whrn push button screen is sensetive sepaker has sound and menu and back key light are on but screen come few seconds later i just saw black screen in first seconds.Some times call me someone and i cant answer in few seconds.i tried for solution remove sd card and close miui optimization in developer option but my issue continue.I flashed last stock and stable miui rom but not solved too .Also tried all of most custom roms old stable and developer roms but results are same. How can i do it for solution ?In other forums i see a lot of people have this issue. Espacelly redmi note 6 and note 6 pro Now i thinking this is not software bug i think it is hardware issue.Sory for my bad english.Anybody know how can i do ?
Which rom arebu currently using?
babavura said:
I have wake delay issue.When try wake with power button then wake 7 8 seconds later.whrn push button screen is sensetive sepaker has sound and menu and back key light are on but screen come few seconds later i just saw black screen in first seconds.Some times call me someone and i cant answer in few seconds.i tried for solution remove sd card and close miui optimization in developer option but my issue continue.I flashed last stock and stable miui rom but not solved too .Also tried all of most custom roms old stable and developer roms but results are same. How can i do it for solution ?In other forums i see a lot of people have this issue. Espacelly redmi note 6 and note 6 pro Now i thinking this is not software bug i think it is hardware issue.Sory for my bad english.Anybody know how can i do ?
Click to expand...
Click to collapse
add this module to Magisk
Walden0 said:
Which rom arebu currently using?
Click to expand...
Click to collapse
OmnioPT said:
add this module to Magisk
Click to expand...
Click to collapse
Thank you but i tried now it did not work for me. If i try wake suddenly after lock it will open screen but if i wait 10-15 seconds (i think its about deep sleep)come but with 7 - 8 seconds delay.
And i using last rom for global stable rom 10.2.3
babavura said:
Thank you but i tried now it did not work for me. If i try wake suddenly after lock it will open screen but if i wait 10-15 seconds (i think its about deep sleep)come but with 7 - 8 seconds delay.
And i using last rom for global stable rom 10.2.3
Click to expand...
Click to collapse
Try a custom rom based on oreo, also try to change your firmware to 9.6.3
Walden0 said:
Try a custom rom based on oreo, also try to change your firmware to 9.6.3
Click to expand...
Click to collapse
Thanx for reply but i said i tired all of miui rom 8.xx 9.xx. but still first installiation screen in has delay problem.
babavura said:
Thanx for reply but i said i tired all of miui rom 8.xx 9.xx. but still first installiation screen in has delay problem.
Click to expand...
Click to collapse
First installation screen or every time u wake device with power button?
Walden0 said:
First installation screen or every time u wake device with power button?
Click to expand...
Click to collapse
I tried to said i have same issue (7 8 seconds unlock screen delay) on first installiation screen. If i dont wait and press power button imediatly few times or when charging i have not any issues.