I tried to update to the stock JB rom using LGNPST. I followed the instructions to a T. However, I kept getting "ERROR: Fail changing to Diag Mode". It never progressed past 0%. Any help would be appreciated.
ME Android said:
I tried to update to the stock JB rom using LGNPST. I followed the instructions to a T. However, I kept getting "ERROR: Fail changing to Diag Mode". It never progressed past 0%. Any help would be appreciated.
Click to expand...
Click to collapse
Never mind. It looked like it was caused by the USB 3.0 port. My laptop has 2 USB3.0 ports and one USB2.0 port. I tried both of the USB3.0 ports and it failed. I didn't try the USB2.0 one since it was occupied by my mouse. But after trying the USB2.0 port, everything went smoothly and now I have the 4.1.2.
I have lgnpst 1.1.3 ...it wont recognize my phone at all. I used freegee to unlock my bootloader so I'm rooted also. My HUGE problem is I can't flash any 4.2 ROMS because I'm not recognized on lgnpst and I cant finish installing the at&t update because my bootloader is unlocked...I'm not sure what to do at this point. I'm stuck with the older ROMS!! =/
Sent from my LG-E970 using xda app-developers app
Sent from my LG-E970 using xda app-developers app
That version will not work. You need 2.2.3? I believe
Sent from my LG-E970 using xda app-developers app
mainomain2 said:
I have lgnpst 1.1.3 ...it wont recognize my phone at all. I used freegee to unlock my bootloader so I'm rooted also. My HUGE problem is I can't flash any 4.2 ROMS because I'm not recognized on lgnpst and I cant finish installing the at&t update because my bootloader is unlocked...I'm not sure what to do at this point. I'm stuck with the older ROMS!! =/
Sent from my LG-E970 using xda app-developers app
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
I have the same issue so I wonder what is to be done. I have 2.2.3 lgnpst and it shows unknown item on com 3. I select the dll and tinybin. When I click start it does nothing phone stays in stand by in lgnpst. And stuck at 0% and no further. I have installed drivers for usb twice. And wiped lgnpst 1.3 and fresh install 2.2.3 with v5.0 of the other two files. Still same.
And your in download mode on phone? And unknown on com3 worked on mine. Just made sure dll was lge970, and bin was selected.
Sent from my LG-E970 using xda app-developers app
Ciloteille said:
I have the same issue so I wonder what is to be done. I have 2.2.3 lgnpst and it shows unknown item on com 3. I select the dll and tinybin. When I click start it does nothing phone stays in stand by in lgnpst. And stuck at 0% and no further. I have installed drivers for usb twice. And wiped lgnpst 1.3 and fresh install 2.2.3 with v5.0 of the other two files. Still same.
Click to expand...
Click to collapse
Make sure the phone is connected to a USB2.0 port, not USB3.0.
Edit: I tried again on my laptop now and it says it cannot load module in cmd. Missing something? ( I have tried to see if I needed to register the dll but it won't even work. Any insight )
files installed:
lgnpst 2.2.3
models 5.0
other one 5.0
usb drivers
I don't have any usb 3.0 on my developer/lab laptop
Sent from my LG-E970 using xda app-developers app
---------- Post added at 11:59 AM ---------- Previous post was at 11:57 AM ----------
iceman99393 said:
And your in download mode on phone? And unknown on com3 worked on mine. Just made sure dll was lge970, and bin was selected.
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
That correct I used the... lg-ls970.dll like file and tiny.bin
Sent from my LG-E970 using xda app-developers app
Wen u get to 85% do a hard reset it should work fine after that ive seen all errors so trust this unplug phone after 85% and hold volume down or up and power button and do a hard reset ive done it atleast 10 times so goodluck i hope this helps out
Sent from my LG-E970 using xda app-developers app
Related
Hello im having problems rooting my device im using the one click root when it says hacking ur **** it then says device not found i tried everything am i doing so.ething wrong
Sent from my MB855 using XDA
Just to start with the obvious, have you done everything in the following instructions?
Shabby's AIO Root
Install the Motorola drivers.
Turn on debugging mode: Menu/Settings/Applications/Development/USB Debugging.
Connect phone to computer in "Charge Only" mode.
Double click the root.bat file and follow the on-screen prompts from the window that will pop up.
Click to expand...
Click to collapse
Sent from my MB855 using XDA
braindeadracefan said:
Just to start with the obvious, have you done everything in the following instructions?
Sent from my MB855 using XDA
Click to expand...
Click to collapse
I done all those
Sent from my MB855 using xda premium
Have you tried a different USB port or cable? It's been so long since I rooted I only vaguely remember the process.
Sent from my MB855 using XDA
I've rooted 4 photons and had similar issues where it says its rooted (after running the program), but in actuality isnt rooted (no superuser app, etc).
My solution was running the program again. Also if you are running in a windows 7 environment I would recommend "right clicking" the batch file and running it as "administrator"
also make sure your computer firewall isnt blocking any functions.
The one click method never worked for me until i SBF'd to 198_7 but i would recommend using the torpedo method and following the instructions here: http://codehenge.net/blog/2011/08/rooting-a-motorola-photon-without-a-dock/
Goodluck!
---------- Post added at 05:41 PM ---------- Previous post was at 05:09 PM ----------
If that does not work try the instructions @ http://forum.xda-developers.com/showthread.php?t=1243792
Id suggest downloading dropbox and photon-torpedo.tar and then exporting the file to sd\download to skip installing the dolphin browser. I know this method works bc I just re rooted my device
I had the same problem, make sure usb debugging is on and change from charge mode to portal mode, i believe that's what its called. Don't know why this does it but it does
Sent from my MB855 using xda premium
I've noticed in my experience that ADB doesn't seem to like USB 3.0 connections. After switching to a USB 2.0 port, ADB should be able to detect the phone, and the one-click root program should work just fine. If it doesn't, try booting the rooting program as administrator.
Right click "Run As Administrator"....Gotta love windows
I used a different USB cable n it worked thanks for all the advice
Sent from my MB855 using xda premium
I seem not to be able to root my Optimus G. Is it because my software number ends in 20J? I'm kinda new at this. Please help
Sent from my LG-E970 using xda app-developers app
onebaddeck said:
I seem not to be able to root my Optimus G. Is it because my software number ends in 20J? I'm kinda new at this. Please help
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
you need fiddy's universal root from the sprint section. It'll work fine.
I already tried it. It keeps saying abd isnt a command or something like that. And when it did say it rooted it didnt install superuser. Amd it wasnt rooted either
Sent from my LG-E970 using xda app-developers app
onebaddeck said:
I already tried it. It keeps saying abd isnt a command or something like that. And when it did say it rooted it didnt install superuser. Amd it wasnt rooted either
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
The root method works, sounds like you need to educate yourself on how to use ADB correctly.
onebaddeck said:
I already tried it. It keeps saying abd isnt a command or something like that. And when it did say it rooted it didnt install superuser. Amd it wasnt rooted either
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
I have used it twice, and it took many tries before it worked. I just kept restarting current root bat. over and over until it worked.
gunnyman said:
The root method works, sounds like you need to educate yourself on how to use ADB correctly.
Click to expand...
Click to collapse
i know i do, Like i said, Im kinda new at this so im not really sure how everything works.
1. Make sure usb debugging is turned on
2. Install lg usb drivers
3. Plug in phone via usb to pc in charge only mode.
4. Run bat file.
5. Switch to mtp mode..... Wait a minute for phone and pc get done what they are gunna do.... Ignore pc prompts and on phone prompts...
6 follow prompts on PC and there u go rooted jb
Via LG OG running Rootbox 4.2.2
So I tried switing a few library files now I just get a pic of a dead android. I used fastboot and erase/reflashed u boot and recovery img. I can go in software mode but it fails everytime that phone is not connected. Not sure what else I can try.... I tried hard reset as well.... any thoughts?
Just out of curiosity, did you try flashing all of the uboots/xloaders in fastboot to see if it recognized any of them?
Also have to watched device manager on windows when you of in your phone and try uninstalling the driver and reinstalling it?
Sent from my LG-P769 using xda app-developers app
---------- Post added at 04:02 AM ---------- Previous post was at 03:58 AM ----------
I had a similar situation, I used the fastboot script to flash back to the ics uboot/xloaders then s/w was able to recognize the phone
Sent from my LG-P769 using xda app-developers app
Sent from my LG-P769 using xda app-developers app
omgbossis21 said:
So I tried switing a few library files now I just get a pic of a dead android. I used fastboot and erase/reflashed u boot and recovery img. I can go in software mode but it fails everytime that phone is not connected. Not sure what else I can try.... I tried hard reset as well.... any thoughts?
Click to expand...
Click to collapse
Try booting to stock recovery http://forum.xda-developers.com/showpost.php?p=38785813&postcount=4 you should have adb access from there.
Stock recovery wasn't an option BC I unpacked it, signed it with those LG sign tools from the 3d,repacked it and flashed it. Btw the sign tools don't work . I used the script to fastboot flash x and u for ics and was able to kdz flash 10g which ceased on the boot animation. I tried it again, same thing. I then kdz flashed 20d but it booted with a wonky touch screen. I had already manually factory reset so I had to navigate everything wonky screen. Lot of work to get back to my backup but I finally did. Even after I had flashed the proper recover I couldnt boot into it.
Sent from my LG-P769 using xda app-developers app
So as you all know the sense 5 update just came out today, which is great! Except for me... I've tried installing the update 2 times and it downloads perfectly fine. Then I click install now and it boots into recovery. It says "installing updates from Verizon wireless" or something like that. It gets half way through the bar and then quits out and goes to the little picture of a phone and the red triangle with the exclamation point in it right above the little phone. I have tried waiting to see if anything happens and then phone just shuts down and reboots into sense 4+. I am running stock recovery(just flashed back from twrp using .torrented's recovery) and I am moonshined. Any help would be appreciated very much.
Sent from my HTC6435LVW using XDA Premium 4 mobile app
Oh also as a little bit more information when the phone starts back up it gives me an error 410
Sent from my HTC6435LVW using XDA Premium 4 mobile app
Another update. Just found out that after I updated it to the 2.08 kernel I lost my root. Yet my hboot still says tampered and unlocked. I'm assuming flashing the stock hboot will fix?
Sent from my HTC6435LVW using XDA Premium 4 mobile app
U should have waited for the ota update and rooted. Someone will releash in few months.
Sent from my HTC6435LVW using XDA Premium 4 mobile app
xxdeathshadowxx9 said:
Oh also as a little bit more information when the phone starts back up it gives me an error 410
Sent from my HTC6435LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I think error 410 means something it's looking for is missing, could be the modified hboot. Try the stock hboot.
Use this to flash the stock hboot then go back into recovery and see if the update finishes the install.
http://forum.xda-developers.com/showthread.php?t=2219175
I am also having trouble updating. I was on a sense 5 ROM, then recovered to my stock ROM once I heard the update was out. I did all of the OTA updates, and the final one caused my phone to freeze at the HTC loading screen when the phone is turning on. Can someone help?
JJS714 said:
I am also having trouble updating. I was on a sense 5 ROM, then recovered to my stock ROM once I heard the update was out. I did all of the OTA updates, and the final one caused my phone to freeze at the HTC loading screen when the phone is turning on. Can someone help?
Click to expand...
Click to collapse
Are you on he stock recovery and hboot? If not try the link in my post above yours.
orangechoochoo said:
Are you on he stock recovery and hboot? If not try the link in my post above yours.
Click to expand...
Click to collapse
its keeps saying my device is not recognized...
JJS714 said:
its keeps saying my device is not recognized...
Click to expand...
Click to collapse
Update your drivers and sdk.
orangechoochoo said:
Update your drivers and sdk.
Click to expand...
Click to collapse
I'm pretty sure I have the newest SDK, and I could just install the drivers from that DROID DNA toolbox right?
JJS714 said:
I'm pretty sure I have the newest SDK, and I could just install the drivers from that DROID DNA toolbox right?
Click to expand...
Click to collapse
I believe you can, I'm not sure if the drivers in that app are the most current but it won't hurt to try.
Do you have USB debugging on? Also try a different USB port and/or USB cord.
orangechoochoo said:
I believe you can, I'm not sure if the drivers in that app are the most current but it won't hurt to try.
Do you have USB debugging on? Also try a different USB port and/or USB cord.
Click to expand...
Click to collapse
I tried that. For some reason the drivers don't seem to be installing. The thing is it recognizes my phone when im in android but not when I am in hboot
Use fast boot instead.
I'm sorry that's what I meant. In the toolbox I go to flash hboot, base 2.06, and then it says waiting for device. Flashboot USB shows up on my phone, but it says Windows was unable to recognize device because it malfunctioned the last time it was plugged in.
Restart the computer.
I have multiple times.. this is extremely frustrating
What is your computer's OS?
Windows 8.1
Those have been troublesome. Is that the same computer you used to s-off?
Try a Windows 7 computer.
Yes this is the same computer I used to get S-off. Just connected to a different computer (still windows 8) and I still got the message "USB device not recognized. The last USB device you connected to this computer malfunctioned, and Windows does not recognize it."
i have a droid dna
i have uploaded a few picks because i want to root this phone but iv tried everything i could find on google i found the moonshine method but i cant get it to work. plz help im on strsaighjt talk and i want to get the newest firmware and flash to venom red theme please help me.
Alucardisking said:
i have a droid dna
i have uploaded a few picks because i want to root this phone but iv tried everything i could find on google i found the moonshine method but i cant get it to work. plz help im on strsaighjt talk and i want to get the newest firmware and flash to venom red theme please help me.
Click to expand...
Click to collapse
Your Software/Firmware version is 2.06
Moonshine will work, it's how I got S-Off on my third DNA.
The first two I did the hard way.
Follow the instruction EXACTLY.
You will have to download the latest SDK tools and the correct drivers.
You must have ADB and Fastboot working.
Turn off your Firewall on your PC.
Uninstall HTC Sync.
This is all in the instructions. If you can't get it to work, maybe you shouldn't root your device.
Maybe tell us what error your getting????
Sent from my HTC6435LVW using XDA Premium 4 mobile app
It is will say getting updates then it will say error press enter to exit and read all directions again
Sent from my HTC6435LVW using xda app-developers app
Can u send me a link for the correct drivers plz and ty
Sent from my HTC6435LVW using xda app-developers app
Alucardisking said:
Can u send me a link for the correct drivers plz and ty
If ADB and Fastboot both recognize device, then your drivers are okay.
Fastboot drivers are broken on Windows 8.1
Windows 8.0 and earlier work okay for me.
USB 2.0 port. Do not use a 3.0 port.
Did you unzip the archive before running distiller?
Click to expand...
Click to collapse
yes
i got the distiller to get to where it reboots my phone into fastbootmy phones does it but fastboot times out and it says u fix yes enter to exit
plus bt ur banner i want to flash the viper rom with sense 5 on the phone as well
im working a windows 7
and adb works but i cnt get fastboot to recognize the device
Did you disable lock screen. Enable adb. Turn off fast boot
Sent from my HTC6435LVW using XDA Premium 4 mobile app
disabled lock screen and fastboot but how to enable adb on the phone???
Its in developer .. Called android debugging
Sent from my HTC6435LVW using XDA Premium 4 mobile app
Yes debugging is checked
Turn phone off. Volume Down power on. Factory reset. Backup data first. Then run moo shine after Ur turn on and off everything I mentioned above.
Sent from my HTC6435LVW using XDA Premium 4 mobile app
I have already done a factory restore and tried again I'm still stuck at the very same point
Sent from my HTC6435LVW using xda app-developers app
Alucardisking said:
I have already done a factory restore and tried again I'm still stuck at the very same point
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
Turn off anti virus and firewall
Alucardisking said:
I have already done a factory restore and tried again I'm still stuck at the very same point
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
Tell us the error your recieving.
Sent from my HTC6435LVW using XDA Premium 4 mobile app
i have it enabled i have all drivers correctly installed and i have htc sync completly removed. and i get this error
Alucardisking said:
i have it enabled i have all drivers correctly installed and i have htc sync completly removed. and i get this error
Click to expand...
Click to collapse
You have a usb connection error.. Do you recieve this error every time>>?? Are you using the OEM HTC Cable?
Yes but I'm using the stock cord I got I have a few others I could try if u think that will help
Sent from my HTC6435LVW using xda app-developers app
I also tried all cords I have and none of them worked all the same error
Sent from my HTC6435LVW using xda app-developers app
Alucardisking said:
I also tried all cords I have and none of them worked all the same error
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
Do you have adb and fastboot installed correctly.