Xperia Sola Can't Reboot into Clockworkmod Recovery - Sony Xperia P, U, Sola, Go

Hello,
I am a complete noob when it comes to dealing with phones.
I have a Sony Xperia Sola (firmware 6.1.1.B.1.54 ICS)
I downloaded Rom Manager via Play Store and want to flash a custom rom.
But whenever I try to select the option "Reboot and Install", only a normal boot happens.
How do I reboot and install the rom?? I have tried the button combos (power+volume - and volume +) but nothing works.
Please help!
PS
I am
-rooted
-bootloader unlocked
-clockworkmod recovery via recoverX
-rom is [ROM] Unoficial JellyBean stockrom 6.2.A.0.400 Sola

I understand that the rom you mentioned is recently ported and also deleted from development section of sola (munjeni rom).
According to his instruction, you need to do following thing:
Enter fastboot mode (off phone then hold volume up and plug cable)
Flash boot.img in zip Rom file to phone (fastboot flash boot boot.img)
Turn on phone and enter recovery menu (on phone then spam the volume down)
Do the clear data, cache... then install the zip file (rom)
Done.

Why was the rom deleted from the development section? Any clue? It was such an useful rom (using it myself)
And no, the original instruction only said to flash the zip file. Not fastboot the kernel before that. Fastbooting is only necessary I you get boot loops on normal flashing
Sent from my Nexus 10 using Tapatalk HD

zombiegenerator said:
Why was the rom deleted from the development section? Any clue? It was such an useful rom (using it myself)
And no, the original instruction only said to flash the zip file. Not fastboot the kernel before that. Fastbooting is only necessary I you get boot loops on normal flashing
Sent from my Nexus 10 using Tapatalk HD
Click to expand...
Click to collapse
I finally got into recovery mode yesterday (CWM touch), but today when I tried to do it again, only a stock recovery occurred. What happened?? I can't go back into cwm touch recovery

You have not flashed your kernel (boot.img) properly
Sent from my X10i using xda premium

Why was the rom deleted from the development section? Any clue? It was such an useful rom (using it myself)
And no, the original instruction only said to flash the zip file. Not fastboot the kernel before that. Fastbooting is only necessary I you get boot loops on normal flashing
Click to expand...
Click to collapse
I finally got into recovery mode, but when trying to flash the JB rom, it says something about a (Status 7 error) Flash aborted. how did you successfully flash yours?

First, you flash the stock ICS rom of sola. It will create the compatible partitions for JB in sola.
Second, you enter recovery mode and wipe all data, cache.... (maybe flash boot.img is required to entering this mode)
Finally, you install the zip file (rom).
Good luck.

k66473 said:
First, you flash the stock ICS rom of sola. It will create the compatible partitions for JB in sola.
Second, you enter recovery mode and wipe all data, cache.... (maybe flash boot.img is required to entering this mode)
Finally, you install the zip file (rom).
Good luck.
Click to expand...
Click to collapse
I have flashed stock ICS, but even after I wiped/factoy reset, it still says Status 7 error

Maybe you should try to flash the boot.img in the zip file of munjeni before entering recovery mode and wipe all data, cache.
Regards,

k66473 said:
Maybe you should try to flash the boot.img in the zip file of munjeni before entering recovery mode and wipe all data, cache.
Regards,
Click to expand...
Click to collapse
The hash is mismatched, he needs to download the zip file again
Sent from my Nexus 10 using Tapatalk HD

Unable install cwm for my sola
zombiegenerator said:
The hash is mismatched, he needs to download the zip file again
Sent from my Nexus 10 using Tapatalk HD
Click to expand...
Click to collapse
Sir,
I have tried to install cwm for xperia sola .
it locked boot loader
now running .54 stock
rooted
please give me detail steps : how to install cwm recovery ??
or any other manually how i can install the cwm for sola ?
tired of searching in internet from morning today
i have tried with recoverx.zip . it wasnt running on windows 8 it seems

sidrockzz said:
Sir,
I have tried to install cwm for xperia sola .
it locked boot loader
now running .54 stock
rooted
please give me detail steps : how to install cwm recovery ??
or any other manually how i can install the cwm for sola ?
tired of searching in internet from morning today
i have tried with recoverx.zip . it wasnt running on windows 8 it seems
Click to expand...
Click to collapse
First you will need to have root, then you can try one of the following links
http://forum.xda-developers.com/showthread.php?t=2020893&highlight=cwm+recovery
http://forum.xda-developers.com/showthread.php?t=1953584&highlight=cwm+recovery

may I know how to flash boot.img for Xperia Sola?
This is my current issue
http://forum.xda-developers.com/showthread.php?t=2541786
Anyone can assist on it? @@
Thanks a lot

How do you flash boot.img?
k66473 said:
Maybe you should try to flash the boot.img in the zip file of munjeni before entering recovery mode and wipe all data, cache.
Regards,
Click to expand...
Click to collapse
How can one flash boot.img when we can only select .ftf or .sin files in flashmode???

nofear246 said:
How can one flash boot.img when we can only select .ftf or .sin files in flashmode???
Click to expand...
Click to collapse
You flash in fastboot mode, or with recovery, but you must have unlocked bootloader, or it will brick your phone.

Related

[Q] software problems

First of all, I'd like to say hello to everybody, since I'm new here.
I went into some problems with my Xperia Neo. I unlocked the bootloader, made a backup with ClockWorkMod, wiped everything, flashed the CM 7 ROM, it gave me a software boot loop, so I went back to CWM, wiped everything again, and restored from the backup, but now it's frozen at the "Sony Ericsson" logo. Any suggestions?
Any help appreciated.
attaching 'adb logcat' files for both CM 7 ROM and restored original firmware. View attachment logcat.rar
When you flashed cm7, did you flashed proper kernel too?
Sent via MT15i FXP 045®
Timezone is +2GMT
umm.. guess i didn't.. please don't tell me i've bricked my Neo..
shadow of a soul said:
umm.. guess i didn't.. please don't tell me i've bricked my Neo..
Click to expand...
Click to collapse
No you dont brick your device. Flash proper kernel and all should be ok.
Sent via MT15i FXP 045®
Timezone is +2GMT
taaviu said:
No you dont brick your device. Flash proper kernel and all should be ok.
Sent via MT15i FXP 045®
Timezone is +2GMT
Click to expand...
Click to collapse
umm.. so, i just need a zip file of a kernel, and flash it just like i flashed CM 7? wipe everything and install zip from sdcard?
shadow of a soul said:
umm.. so, i just need a zip file of a kernel, and flash it just like i flashed CM 7? wipe everything and install zip from sdcard?
Click to expand...
Click to collapse
No. Kernel is included already in zip fail. Simply extract this zip..take fail called "boot.img" plase it fastboot folder, connct your phone in fastboot mode(blue led) then open cmd in fastboot folder and type "fastboot boot boot.img"
Boot.img fail is your kernel.
Then disconnect your phone and reboot to recovery and flash your rom.
Sent via MT15i FXP 045®
Timezone is +2GMT
taaviu said:
No. Kernel is included already in zip fail. Simply extract this zip..take fail called "boot.img" plase it fastboot folder, connct your phone in fastboot mode(blue led) then open cmd in fastboot folder and type "fastboot boot boot.img"
Boot.img fail is your kernel.
Then disconnect your phone and reboot to recovery and flash your rom.
Sent via MT15i FXP 045®
Timezone is +2GMT
Click to expand...
Click to collapse
oh.. in that case i did it with CM 7
whew.. i went through the whole process again, but this time i flashed UltimateMIUI ROM.. my phone's alive again!
ok, everything's working fine so far, but i've encountered a couple of problems. the android.process.media keeps on force closing when i try to download something from market, thus closing the market itself. the other problem is that the leftmost and bottommost sides of the screen are not responsive to touch. any solutions?
thanks in advance.

[Q] HELP !!! Stuck at SE logo trying to install CM7

Hi there, i am new to flashing and roms but i recently tried to install CM7 on my Neo
i rooted my phone and unlocked it by fastboot ..installed CWM recovery and everything was going well untill i tried to flash CM7.2 rom and then my phone got stuck at the SE logo...and i can't even get to the recovery mode ...now my phone is useless and i need help
mohamedawad said:
Hi there, i am new to flashing and roms but i recently tried to install CM7 on my Neo
i rooted my phone and unlocked it by fastboot ..installed CWM recovery and everything was going well untill i tried to flash CM7.2 rom and then my phone got stuck at the SE logo...and i can't even get to the recovery mode ...now my phone is useless and i need help
Click to expand...
Click to collapse
did you read good and do this?
HOWTO
to flash cm7 rom you have to take 3 steps (after unpacking the 7z archive)
step 1 - copy update.zip to sdcard
step 2 - flash new kernel (always use the kernel provided in CM7 / it is incompatible with stock ROM)
ON PC - run fastboot flash boot boot.img (an black window will open and will stay open untill kernel is flashed)
ON PHONE - put phone in fastboot mode (power off then press lower right key and plug usb cable) and phone LED will light BLUE
step 3 - when phone is booting (first 5 seconds) press volume down key several times to enter recovery and choose apply update from sdcard
WARNING - if you used another rom (stock or custom) you have to wipe data or device will not boot
DOWNLOAD
look in my signature
please don't mirror (we want to have download conunt)
Hi
When you were installing CM7 on clockworkmod did you remeber to wipe everything? before you install the rom, on the first screen of clockworkmod you see wipe data and wipe cache. Wipe them both then go to advanced and wipe dalvic cache and battery stats, after that install CM7. So what should you do:
1. turn of phone
2. connect to pc on fastboot and flash kernel with built in recovery (Command: fastboot flash boot boot.img)
3. now disconnect phone and go to cwm and wipe everything like i said
4. install cm7
if works hit thanks ^^
btw. sony ericsson logo, seems like you didnt even flash kernel?
Since u are saying u seeing sony ericsson logo seems u didnt flash kernel properly, use flashtool in xperia neo dev section makes things way easier.
Good luck bro hope this helps !
Sent from my MT15i using XDA
i am trying to flash the kernel via fastboot but i can't and it says phone must be rooted first....before you call me a noob XD i know my phone IS rooted and i flashed the kernel earlier by using kernel manager....now i can't flash the new kernel ...what can i do now ?
Try re rooting ur device bro seems there is an error phone cant get root access something is missed up with the root mayb ! All the best !
Sent from my MT15i using XDA
mohamedawad said:
i am trying to flash the kernel via fastboot but i can't and it says phone must be rooted first....before you call me a noob XD i know my phone IS rooted and i flashed the kernel earlier by using kernel manager....now i can't flash the new kernel ...what can i do now ?
Click to expand...
Click to collapse
just flash that kernel via fastboot. don't use apps to flash kernels
fastboot flash boot nameOfKernel.img
I think you forgot to flash the custom kernel,cos if you flashed the CM kernel it should not show Sony Ericsson boot logo,it should show CM boot logo
update
I flashed .42 firmware again using flashtool and the device is now working
Now i realized that the problem was that i didn't properly unlock the bootloader...what i want now is a way to unlock it..bcz everytime i try it gives me this error
(bootloader) Unlock phone requested
FAILED (remote: oem unlock failed!)
finished. total time: 0.003s
I searched the forum and tried this thread
http://forum.xda-developers.com/showthread.php?t=1544419
but it didn't give any kind of solution, Anybody can help ?
Did u try sony's official unlock from there site?,its the easiest way to unlock bootloader i guess
Sent from my MT15i using XDA
Moursy93 said:
Did u try sony's official unlock from there site?,its the easiest way to unlock bootloader i guess
Click to expand...
Click to collapse
wtf, he is trying that
Madfysh said:
wtf, he is trying that
Click to expand...
Click to collapse
my bad, i misunderstood his post
Moursy93 said:
Did u try sony's official unlock from there site?,its the easiest way to unlock bootloader i guess
Sent from my MT15i using XDA
Click to expand...
Click to collapse
LOL, that's what i am doing in the first place, Thanks for your contribution anyway bro

[Q] [Sola] installing custom rom

Hello, I've been trying to install custom rom on my xperia sola but I don't sure how and I don't wanna brick my phone, some people told me to try ROM Manager or X-Parts but in both app's it says that xperia sola is not supported.
Some told me to use flashtool and flash the boot.img but when I downloaded the pure blood rom(that's what I wanna use) there is only META-INF and system folders and no boot.img file, I've searched for some tutorials with good explanations for xperia sola but I haven't found any.
Can someone please give me a good tutorial or explain to me in detail how to install a custom rom? I have rooted and unlocked my bootloader, yet im not quite sure how to enter my recovery....
Thanks for the help!
msacco4 said:
Hello, I've been trying to install custom rom on my xperia sola but I don't sure how and I don't wanna brick my phone, some people told me to try ROM Manager or X-Parts but in both app's it says that xperia sola is not supported.
Some told me to use flashtool and flash the boot.img but when I downloaded the pure blood rom(that's what I wanna use) there is only META-INF and system folders and no boot.img file, I've searched for some tutorials with good explanations for xperia sola but I haven't found any.
Can someone please give me a good tutorial or explain to me in detail how to install a custom rom? I have rooted and unlocked my bootloader, yet im not quite sure how to enter my recovery....
Thanks for the help!
Click to expand...
Click to collapse
first you will need to install CWM recovery so that you can flash the custom roms to your device......... once installed you will then have to put the zip file of pure blood rom to your SD card and then install via CWM..........
Links:
CWM
@[email protected] said:
first you will need to install CWM recovery so that you can flash the custom roms to your device......... once installed you will then have to put the zip file of pure blood rom to your SD card and then install via CWM..........
Links:
CWM
Click to expand...
Click to collapse
I've already installed CWM but how do I reboot into it?
And is there any way to make sure my CWM is installed correctly like root cheker or something?
I didn't saw you added a link to CWM, I'll check it and see if I manage to do it, thanks.
To reboot into CWM, turn off the phone. Then press the power button till phone starts booting > Then keep pressing (repeatedly) the Volume Down button till CWM loads
Min3r said:
To reboot into CWM, turn off the phone. Then press the power button till phone starts booting > Then keep pressing (repeatedly) the Volume Down button till CWM loads
Click to expand...
Click to collapse
Thanks, can you give me some tips to make sure I won't brick my phone?
msacco4 said:
Thanks, can you give me some tips to make sure I won't brick my phone?
Click to expand...
Click to collapse
Did you unlock your bootloader? If your bootloader is locked the only thing is flash only ROM for locked bootloader.
For example - you install munjenis CWM, you download ROM for locked bootloader (no CyanogenMod), place ROM on your phone memory, switch off the phone, switch on the phone, on logo pressing many times vol +, enter CWM and choose Install zip.
Thats it.
mirost1 said:
Did you unlock your bootloader? If your bootloader is locked the only thing is flash only ROM for locked bootloader.
For example - you install munjenis CWM, you download ROM for locked bootloader (no CyanogenMod), place ROM on your phone memory, switch off the phone, switch on the phone, on logo pressing many times vol +, enter CWM and choose Install zip.
Thats it.
Click to expand...
Click to collapse
My bootloader is unlocked but for some reason I can't manage to go into the recovery, I click the volume(tryed up and down) and nothing happens, I even installed the CWM again but still not working..have an idea why?
msacco4 said:
My bootloader is unlocked but for some reason I can't manage to go into the recovery, I click the volume(tryed up and down) and nothing happens, I even installed the CWM again but still not working..have an idea why?
Click to expand...
Click to collapse
What steps did you actually followed??????????
Please elaborate..........
@[email protected] said:
What steps did you actually followed??????????
Please elaborate..........
Click to expand...
Click to collapse
I used this tutorial: I can't post it here because im a new user, I'll send you in private message.
Tell me if you didn't got the message..
msacco4 said:
I used this tutorial: I can't post it here because im a new user, I'll send you in private message.
Tell me if you didn't got the message..
Click to expand...
Click to collapse
i guess you downloaded the file which you got on the link i gave in the above post???????
download and install flashtool.......
extract the file from the .zip which you got from the download.........
you will get a boot.img file.......then copy this file(boot.img) in the folder in C:\Flashtool\x10flasher_lib (if you installed flashtool in C drive)...........
then open command prompt.......
go to the folder x10flasher_lib......(do the below mentioned steps)
cd/ (enter)
cd Flashtool (enter)
cd x10flasher_lib (enter)
now type(without quotes)
"fastboot flash boot boot.img" and then enter
then connect your fone when it shows waiting for your device by pressing and holding vol up (vol +) button this will go into fastboot mode and install the CWM.........
after this you can refer to my previous post........ PM me if anything you dont get.........
lyspne tourist
@[email protected] said:
i guess you downloaded the file which you got on the link i gave in the above post???????
download and install flashtool.......
extract the file from the .zip which you got from the download.........
you will get a boot.img file.......then copy this file(boot.img) in the folder in C:\Flashtool\x10flasher_lib (if you installed flashtool in C drive)...........
then open command prompt.......
go to the folder x10flasher_lib......(do the below mentioned steps)
cd/ (enter)
cd Flashtool (enter)
cd x10flasher_lib (enter)
now type(without quotes)
"fastboot flash boot boot.img" and then enter
then connect your fone when it shows waiting for your device by pressing and holding vol up (vol +) button this will go into fastboot mode and install the CWM.........
after this you can refer to my previous post........ PM me if anything you dont get.........
Click to expand...
Click to collapse
I didn't use it because It says its for build .10 and I'm on .54, it matters? if no I'll try it and see if it works.
Thanks for the replies
msacco4 said:
I didn't use it because It says its for build .10 and I'm on .54, it matters? if no I'll try it and see if it works.
Thanks for the replies
Click to expand...
Click to collapse
you are on stock .54 so use this......... the instructions are given in that thread..... you can also follow the steps in my previous post.......
@[email protected] said:
i guess you downloaded the file which you got on the link i gave in the above post???????
download and install flashtool.......
extract the file from the .zip which you got from the download.........
you will get a boot.img file.......then copy this file(boot.img) in the folder in C:\Flashtool\x10flasher_lib (if you installed flashtool in C drive)...........
then open command prompt.......
go to the folder x10flasher_lib......(do the below mentioned steps)
cd/ (enter)
cd Flashtool (enter)
cd x10flasher_lib (enter)
now type(without quotes)
"fastboot flash boot boot.img" and then enter
then connect your fone when it shows waiting for your device by pressing and holding vol up (vol +) button this will go into fastboot mode and install the CWM.........
after this you can refer to my previous post........ PM me if anything you dont get.........
Click to expand...
Click to collapse
I installed the recovery, it worked and I installed the ROM, but now my phone is stuck on SONY logo after booting the phone, I wiped out all the data, what to do now?? : \
I can still go to recovery.
msacco4 said:
I installed the recovery, it worked and I installed the ROM, but now my phone is stuck on SONY logo after booting the phone, I wiped out all the data, what to do now?? : \
I can still go to recovery.
Click to expand...
Click to collapse
Which ROM you installed?????????
and which CWM??????????
first you have to wide data/factory reset, wipe dalvik, chache...........
the install ROM and then again wipe all these from CWM...........
@[email protected] said:
Which ROM you installed?????????
and which CWM??????????
first you have to wide data/factory reset, wipe dalvik, chache...........
the install ROM and then again wipe all these from CWM...........
Click to expand...
Click to collapse
I tryed to install both Pure blood and Ultimate sola roms, same problem with both.
I can't post links yet, write in youtube "How to Load a Custom ROM on an Android Device " and go to the third video(for me anyway) by MobileUnlimited, that's what I used, I backed up all the data, wiped out data/factory reset, then install zip from sdcard(which btw goes to my internal storage and not my sdcard), then reboot system now.
And I used the CWM you gave me in post #12.
Thanks.
Edit - well, I didn't notice that, but the CWM you gave me is by "munjeni", and in the pure blood post it says: "2. FLASH CWM V5 for unlocked bootloaders... dont use any other...munjeni's "memory tweak + owerclock 1.15 ghz WILL GIVE BOOTLOOP.. and for locked bootloaders used the CWM is available for locked BL stock rom."
Can you give me another .54 CWM?
msacco4 said:
I tryed to install both Pure blood and Ultimate sola roms, same problem with both.
I can't post links yet, write in youtube "How to Load a Custom ROM on an Android Device " and go to the third video(for me anyway) by MobileUnlimited, that's what I used, I backed up all the data, wiped out data/factory reset, then install zip from sdcard(which btw goes to my internal storage and not my sdcard), then reboot system now.
And I used the CWM you gave me in post #12.
Thanks.
Click to expand...
Click to collapse
wipe all again after installing the zip..............
link to CWM v5.......... link
use fastboot to install this..........
Hope you are running ICS .54 Firmware??????????????
@[email protected] said:
wipe all again after installing the zip..............
link to CWM v5.......... link
use fastboot to install this..........
Hope you are running ICS .54 Firmware??????????????
Click to expand...
Click to collapse
of course i'm using .54 :X
"2. FLASH CWM V5 for unlocked bootloaders... dont use any other...munjeni's "memory tweak + owerclock 1.15 ghz WILL GIVE BOOTLOOP.. and for locked bootloaders used the CWM is available for locked BL stock rom."
so should I use this or not?
I'll try it anyway.
Thanks.
msacco4 said:
of course i'm using .54 :X
"2. FLASH CWM V5 for unlocked bootloaders... dont use any other...munjeni's "memory tweak + owerclock 1.15 ghz WILL GIVE BOOTLOOP.. and for locked bootloaders used the CWM is available for locked BL stock rom."
so should I use this or not?
I'll try it anyway.
Thanks.
Click to expand...
Click to collapse
i gave the link in the above post for CWM v5..........
@[email protected] said:
i gave the link in the above post for CWM v5..........
Click to expand...
Click to collapse
yeah, but "Pulak861" said not to use munjei's version.
should I try it anyway?
msacco4 said:
yeah, but "Pulak861" said not to use munjei's version.
should I try it anyway?
Click to expand...
Click to collapse
this is the v5 version which you have to use.........
try this one and it will work..........
this one is not overclocked or memory tweaked so this will work..............

[Q] Sola bricked during flash of CM10: please help!

Hello
I was just trying to flash CM10 into my Sola
I unlocked the bootloader
I root it
Installed Recovery ROM
Made backup of current ROM
Wipe/Factory Reset
While flashing in Recovery Mode I got the error 7 message, so the instructions were to do the flash of the rom through flashtool
Flashed the rom through flashtool
After reboot, it's stucked on the initial "FreeXperia" image and it freezes there
I can enter in fastboot and flashmode, but I tried to flash again the "MT27_6.1.1.B.1.54_KERNEL.ftf" firmware, but the only thing that changes is the "FreeXperia" colorful image to the standard "Sony" logo.
What can I do?! How come it doesn't boot?!
Please help.
Do following:
- Shut down your phone
- connect it to your computer in fastboot mode (with volume up hold)
- flash the boot.img which is inside the ROMs .zip
- Do your steps again (enter recovery, wipe etc)
I've flashed the boot.img of CM10 before.
Well, the problem is that I cannot enter recovery mode!
Only fastboot and flashmode
Tom_Joad_XDA said:
I've flashed the boot.img of CM10 before.
Well, the problem is that I cannot enter recovery mode!
Only fastboot and flashmode
Click to expand...
Click to collapse
Try power button insteat volume to enter recovery.
ChikeD said:
Try power button insteat volume to enter recovery.
Click to expand...
Click to collapse
Ok, I could get into recovery mode. I just restored my rom backup (STOCK ICS with root and unlocked bootloader)
I followed all the instructions. Should I repeat the process and expect a different result?!
Tom_Joad_XDA said:
Ok, I could get into recovery mode. I just restored my rom backup (STOCK ICS with root and unlocked bootloader)
I followed all the instructions. Should I repeat the process and expect a different result?!
Click to expand...
Click to collapse
Flash the zip with the recovery in boot.img from the rom not the one you have in stock.
ChikeD said:
Flash the zip with the recovery in boot.img from the rom not the one you have in stock.
Click to expand...
Click to collapse
I have copied the CM10 zip into the phone (cm-10-20140113-UNOFFICIAL-pepper.zip)
Isn't this the rom I should flash in recovery?
Tom_Joad_XDA said:
I have copied the CM10 zip into the phone (cm-10-20140113-UNOFFICIAL-pepper.zip)
Isn't this the rom I should flash in recovery?
Click to expand...
Click to collapse
Yup that's it, but first flash boot.img from the rom with fastboot.
Don't expect the phone to boot because this kernel is not comoatible with stock ROM go strait to recovery, do whatever is needed (factiry rest, clear dalvik and cache etc) as instructed in it's thread, and fash the zip
ChikeD said:
Yup that's it, but first flash boot.img from the rom with fastboot.
Don't expect the phone to boot because this kernel is not comoatible with stock ROM go strait to recovery, do whatever is needed (factiry rest, clear dalvik and cache etc) as instructed in it's thread, and fash the zip
Click to expand...
Click to collapse
So, just to be clear:
I flash boot.img from the CM10 rom with fastboot using Flashtool, right?
Then, in recovery, I flash the CM10 zip file, correct?
Tom_Joad_XDA said:
So, just to be clear:
I flash boot.img from the CM10 rom with fastboot using Flashtool, right?
Then, in recovery, I flash the CM10 zip file, correct?
Click to expand...
Click to collapse
Flashtool(select kernel to flash) or manually : fastboot flash boot boot.img
The enter CWM recovery and follow the instructions on ROM's thread.
ChikeD said:
Flashtool(select kernel to flash) or manually : fastboot flash boot boot.img
The enter CWM recovery and follow the instructions on ROM's thread.
Click to expand...
Click to collapse
Well, I still get the (Status 7) error. I don't know what I'm doing wrong.
My only doubt is if I'm using the correct recovery. How can I know that?
My current recovery is CWM Touch v5.5.0.4 (modified CWM by Munjeni)
Honestly, I'm getting do reallly tired of this.
For 2 days I've been trying to install this ROM and I always get stuck with the /(&)(#$ "status 7" error.
Here is what I do step by step, so someone can point me in the right directions because, quite frankly, I just wan to throw this phone over the window right now...
1. After I get the "status 7" error I restore my rom backup, which brings me to stock ICS with unlocked bootloader and with root
2. I reboot in fastboot mode and, with Flashtool, I flash the boot.img I extracted from the "cm-10-20140113-UNOFFICIAL-pepper.zip"
3. I enter in recovery mode and wipe all the data/cache/delvik cache etc (I've also tried to do this BEFORE flashing the boot.img)
4. Still in recovery, I choose "Install zip from sdcard" and select the "cm-10-20140113-UNOFFICIAL-pepper.zip" (I've also tried to select this file without the boot.img file)
5. I get the status 7 error!!!!!!
Please help, as it is driving me nuts!
Redownload the ROM and try again. I'll give you a step by step instruction now:
- redownload the ROM and push it to your phones storage
- shut down your phone and connect it via fastboot to your computer
- Open the flashtool and flash the boot.img from the rom.zip via fastboot.
- after flashing, disconnect your phone from your computer, then wait some seconds
- Now power on your phone and enter recovery
- now you make a full wipe (wipe data, wipe cache, wipe dalvik cache (advanced), format /system (mounts and storage)
- After the full wipe, try to flash the redownloaded ROM again
What exectly the status 7 is for, look at the log.
It fails right in the first assert line of code. I've also tried to remove the assert line, as suggested somewhere on the forum, but then I get a "Status 6" error. I'll try to re-download the zip file when I get home...
ChikeD said:
What exectly the status 7 is for, look at the log.
Click to expand...
Click to collapse
Tom_Joad_XDA said:
It fails right in the first assert line of code. I've also tried to remove the assert line, as suggested somewhere on the forum, but then I get a "Status 6" error. I'll try to re-download the zip file when I get home...
Click to expand...
Click to collapse
the assert n ro.product.device and ro.build.product? This should not happen with the recovery that comes with the ROM.
Well, that may explain it, as I'm not sure I'm using the correct recovery rom, as I didn't knew there was a recovery on this rom.
The instructions in the thread are:
Make a backup of your current rom
Wipe data/factory reset in recovery
Flash CM10 (If you get error 7 while flashing exctract the boot.img from the rom zip, and flash it via fastboot)
Flash Ultra Slim Gapps
Reboot & Enjoy!
So, I had to find a recovery ROM and that is what I did. So maybe that's the problem: I'm not using the correct recovery rom.
What can I do now to change it?
ChikeD said:
the assert n ro.product.device and ro.build.product? This should not happen with the recovery that comes with the ROM.
Click to expand...
Click to collapse
Tom_Joad_XDA said:
Well, that may explain it, as I'm not sure I'm using the correct recovery rom, as I didn't knew there was a recovery on this rom.
The instructions in the thread are:
Make a backup of your current rom
Wipe data/factory reset in recovery
Flash CM10 (If you get error 7 while flashing exctract the boot.img from the rom zip, and flash it via fastboot)
Flash Ultra Slim Gapps
Reboot & Enjoy!
So, I had to find a recovery ROM and that is what I did. So maybe that's the problem: I'm not using the correct recovery rom.
What can I do now to change it?
Click to expand...
Click to collapse
What recovery ROM, you only need to install thr boot.img from the ROM file.
What ROM are you trying to install(link)?
As stated in this thread, I'm trying to install CM10 (cm-10-20140113-UNOFFICIAL-pepper.zip).
My recovery rom is CWM Touch v5.5.0.4 (modified CWM by Munjeni)
ChikeD said:
What recovery ROM, you only need to install thr boot.img from the ROM file.
What ROM are you trying to install(link)?
Click to expand...
Click to collapse
Tom_Joad_XDA said:
As stated in this thread, I'm trying to install CM10 (cm-10-20140113-UNOFFICIAL-pepper.zip).
My recovery rom is CWM Touch v5.5.0.4 (modified CWM by Munjeni)
Click to expand...
Click to collapse
Was I not clear enough?
Your recovery is probably missing those props and yould fail every time, you must use the recovery of the ROM.by flashint boot.img.
And I have asked a link for the ROM you dounload just to make sure it's props are OK, so I need a link.
If it don't let you post a link try to qrap it with code tags (the # button in thepost editor)

[Q] Phone cannot boot into recovery after trying to switch recovery

My D6503 is currently running paranoid android. Previously I've been using cwm but yesterday I decided to try out TWRP. I install TWRP using the TWRP manager in play store but after that when I try to boot to recovery it would show a black screen and orange light on the top speaker. Then I tried to install XZDualRecovery using the installer's method 1 (custom rom with superSU). However after install when the phone reboots it stucks and the sony logo keep flashing. I force shut down using the red button on the side and I managed to get to the system and removed XZDualRecovery. However I still can't get into recovery, it will just show that black screen and orange light. So I wanna ask you guys what should I do to get access to recovery again?
Thank you
elvin316 said:
My D6503 is currently running paranoid android. Previously I've been using cwm but yesterday I decided to try out TWRP. I install TWRP using the TWRP manager in play store but after that when I try to boot to recovery it would show a black screen and orange light on the top speaker. Then I tried to install XZDualRecovery using the installer's method 1 (custom rom with superSU). However after install when the phone reboots it stucks and the sony logo keep flashing. I force shut down using the red button on the side and I managed to get to the system and removed XZDualRecovery. However I still can't get into recovery, it will just show that black screen and orange light. So I wanna ask you guys what should I do to get access to recovery again?
Thank you
Click to expand...
Click to collapse
use flashtool>flashtool.net to flash the TWRP IMG in the original development section, you will need to re-flash Paranoid android ROM to get cwm back
you cant change the recovery pre-packaged into a ROM
Xperia's don't have a recovery partition so recoveries are bundled with the kernel
Envious_Data said:
use flashtool>flashtool.net to flash the TWRP IMG in the original development section, you will need to re-flash Paranoid android ROM to get cwm back
you cant change the recovery pre-packaged into a ROM
Xperia's don't have a recovery partition so recoveries are bundled with the kernel
Click to expand...
Click to collapse
thank you for your reply
I've downloaded flashtool but what function should I use to flash the img? Because the install recovery key is disabled for me.
elvin316 said:
thank you for your reply
I've downloaded flashtool but what function should I use to flash the img? Because the install recovery key is disabled for me.
Click to expand...
Click to collapse
the flash icon at the top left and to flash the boot with sin,elf or img files you use fastboot
fastboot if i remember right is voume up and plug into computer with a powered off device
Flash Device
Envious_Data said:
the flash icon at the top left and to flash the boot with sin,elf or img files you use fastboot
fastboot if i remember right is voume up and plug into computer with a powered off device
Click to expand...
Click to collapse
select kernel to boot, select system to flash or select kernel to flash?
elvin316 said:
select kernel to boot, select system to flash or select kernel to flash?
Click to expand...
Click to collapse
select kernel to flash
Envious_Data said:
select kernel to flash
Click to expand...
Click to collapse
I flashed openrecovery-twrp-2.8.0.1-sirius then when I boot up my phone after the sony logo the screen will become black. Then I flashed the boot.img inside paranoid android rom's zip file. I can now enter to the system but still cannot boot into recovery
elvin316 said:
I flashed openrecovery-twrp-2.8.0.1-sirius then when I boot up my phone after the sony logo the screen will become black. Then I flashed the boot.img inside paranoid android rom's zip file. I can now enter to the system but still cannot boot into recovery
Click to expand...
Click to collapse
hmm, odd, i think you will have to reflash stock, reflash stock then go back to PA
you can use flashtool to reflash a stock FTF
Envious_Data said:
hmm, odd, i think you will have to reflash stock, reflash stock then go back to PA
you can use flashtool to reflash a stock FTF
Click to expand...
Click to collapse
If I flash back to stock, will it relock my bootloader? And can you explain briefly what are the steps?
Thank you
elvin316 said:
If I flash back to stock, will it relock my bootloader? And can you explain briefly what are the steps?
Thank you
Click to expand...
Click to collapse
it will not relock your bootloader
1. download flashtool
2. download a FTF (there is a ftf thread at top of the general section)
3. put FTF in firmwares folder in flashtool folder
4. click flash device icon at the top left
5. click the FTF you selected
6. wait for it to finish preparing
7. power off device
8. plug in flashmode (volume down held and plug usb in)
9. wait for it to finish
10. enjoy stock or install recovery and flash a custom rom
Envious_Data said:
it will not relock your bootloader
1. download flashtool
2. download a FTF (there is a ftf thread at top of the general section)
3. put FTF in firmwares folder in flashtool folder
4. click flash device icon at the top left
5. click the FTF you selected
6. wait for it to finish preparing
7. power off device
8. plug in flashmode (volume down held and plug usb in)
9. wait for it to finish
10. enjoy stock or install recovery and flash a custom rom
Click to expand...
Click to collapse
thank you very much. Looks like it gonna take plenty of time. Will do it later when I have time
There is a easier way to get CWM back. Just flas the boot.img from pa and then go into fastboot (in case you are not already and do "fastboot erase recovery"
On the Z2 the recovery is included in the kernel, and once recovery boots it get expanded to the recovery part. As this is filled by TWRP ATM, none of the 2 will boot.
Sent from my Sony Tablet S using XDA Free mobile app
Myself5 said:
There is a easier way to get CWM back. Just flas the boot.img from pa and then go into fastboot (in case you are not already and do "fastboot erase recovery"
On the Z2 the recovery is included in the kernel, and once recovery boots it get expanded to the recovery part. As this is filled by TWRP ATM, none of the 2 will boot.
Sent from my Sony Tablet S using XDA Free mobile app
Click to expand...
Click to collapse
He said he already tried that
I think the dual recovery that was installed caused problems
http://forum.xda-developers.com/showthread.php?p=56275721
This spesific post

Categories

Resources