[Q] Any tips on cleaning the earpiece speaker? - HTC One X+

The little holes on the earpiece speaker have been getting blocked up by who-knows-what over time. No big deal as far as sound quality goes, but I'm having a hard time seeing the notification LED at this point. I've tried canned air, but I think the holes are so small that the flow of gases kind of flows over the grill. I'd also rather get the dirt out rather than blow it in, since the holes are definitely too small for freed up dirt to get out. Tried working some tape against the area real hard with my fingernail to get a little penetration into the holes, that didnt do much either. Hoping someone out there has some kind of magic tip.

Try a vacuum cleaner with a small nozzle.

Its not too hard to take it apart, I do it every now and then to clean it out, u would be surprised at the dirt and dust that works its way into the edges and around the buttons...
Sent from my HTC One X+ using xda premium

interesting... I hadnt thought of just taking it apart. Any particularly good walkthroughs/instructions you'd recommend?

Related

Sprint cheap feel?

Hi, I have a HTC Pro for sprint, I love everything about it except the battery cover and volume buttons.
The cover creaks, and makes a ton of sound if I try to use the keyboard, one corner is loose, and I believe thats where the sound comes from.
Also the volume keys are hard to use and they sound more like creaking plastic, I cant even tell when it is actually clicking.
Anyone else have this problem? Mine has been like this since day 1.
Any fixes?
I was about to say "Perhaps you have a defective machine, as I also have a Touch Pro from Sprint and have not really noticed this problem" and then I picked it up... top corner as in the back cover right behind about where "Sprint" is printed on the front? Mine actually makes creaky noises there, too... with a bit of push.
I honestly don't notice the noises when I am typing with it, simply because I'm used to keyboards clicking, and noises around me, but I do see what you're saying. I have no fixes to offer, since it seems to be manufacturing rather than a joint or something that could do well with a little dab of WD-40 or something. If the noise takes over my mind, though, you are totally to blame.
Just got mine today. It's very pretty. My first note after only a few hours of usage is the top panel/screen slides a bit to easy, the mogul was a bit more tight...
With some well placed paper, I took small pieces and folded it once, on the corners you can make the cover fit better. This has silenced the creak people are talking about.
Considering the backis a peice of plastic that flexes to lock in and come off,
I don't mind the creaking. I'd prefer this than over a heavy piece of steel
with screws holding it in. The phone is heavy enough as it is.
Sure the quality control isnt' fantastic. The buttons on the face are a little raised up.. but not enough for me to be picky about it. The phones nice, I like it, and i'm happy it's pretty darn good.
Mine creeks too...and the power/volume hard keys dont give good feedback and have minimal travel. I feel as though the power button will break soon, especially since it's used so much to wake the phone. The overal construction is much more beautiful than the mogul, but aside from the keyboard buttons, the construction feels more flimsy, and the slider not as smooth as the mogul.
The touch screen seems to be less sensitive too.
Oh well...it's only a very expensive phone...
My cover creeked pretty bad. I cut a business card to fit and put it under the cover. Problem solved.
i fixed this by putting blue painters tape in layers and cutting to the right size and adding one layer at a time and then putting the cover back on then checking the noise. i reapeated this till it no longer creaked. this is not my fix but posted by someone at ppcgeeks and i think i was linked from there too. but the painters tape has a smooth surface on the non sticky side and it helps the battery cover slip on easily and is easily removed if you need to. hope this helps. oh yea the area around the micro sd slot is the main creaking area on mine and i have heard others say the same. it took 3-4 layers there.
tommy11481 said:
i fixed this by putting blue painters tape in layers and cutting to the right size and adding one layer at a time and then putting the cover back on then checking the noise. i reapeated this till it no longer creaked. this is not my fix but posted by someone at ppcgeeks and i think i was linked from there too. but the painters tape has a smooth surface on the non sticky side and it helps the battery cover slip on easily and is easily removed if you need to. hope this helps. oh yea the area around the micro sd slot is the main creaking area on mine and i have heard others say the same. it took 3-4 layers there.
Click to expand...
Click to collapse
I used some thin strip electrical tape 2 layers on the right side next to the camera. "QUITE NOW"
I think its individual defectiveness. My phone creaks only if I put my ear 1 inch away from it when i press the Sprint logo, extremely unnoticeable. It feels much more solid than my last phone, HTC(PPC)6700, the side buttons are all solid and secure and respond well. No tape needed. If this happened to my phone I'd take it back and demand a new one as it retails for 550USD and that sort of defectiveness is unnacceptable. Although my 6700 retailed for 600USD and was much cheaper.
Mine also has a little creek. There isn't much i dislike about this phone besides the lack of working FM at the moment, and most importantly, the performance of 3d applications/games,videos etc.
I'll try the tape thing tonight.
Wow I don't know why I didn't think about putting something behind the cover. I was complaining that mine feels cheap, but I just threw a few post its back there and now it's nice a firm! thanks!
I ordered my first touch pro over the phone, and it felt SO cheap with all of the "symptoms" of what everyone has been saying, but for a different reason I had to exchange it, and the one they gave me at the store feels SO much sturdier.. I am glad I exchanged..

[Q] Cleaning Speaker Grill above Moto symbol.

I'm really bugged by the imperfection of my speaker.. the fabric over the mic/speaker is stuck onto the grill. Its somewhat noticeable. Anyway to make it look like it did when I first got it?
I noticed this too. It really needs a grill, not a deep little dug out like that.
I personally plan on giving it a bit of compressed air. Be careful though, you should spray it at something neutral first and hold the can up right. I'd hate to see someone freeze their screen or blast liquid all over it (or damage the ear piece).
Design fail.
Eh.. idk about that. I've used that on my Macbook pro and it froze my keys up.. ugh. I hate it. And yea ikr. That's the only thing I miss from my iPhone.
Sent from my MB860 using XDA App
dont blow air you can ruin the speaker if blown too hard. use tape, get some scotch tape and bend it backwards and use tweezers to put the sticky end down to go over the grill and use it like a lint roller.
Oh okay. Well its not lint im worried about. I need to lift it up.. its stuck inside the speaker. Its hard to explain. The speaker or whatever it is, is outlined.. its REALLY annoying. Would the tape thing work with that tho?
Sent from my MB860 using XDA App
I can't get the stupid tape deal to work.. ugh
macperson123 said:
I can't get the stupid tape deal to work.. ugh
Click to expand...
Click to collapse
Don't use something weak like scotch tape. Get some strong duct tape and fold it so it's a sticky square figure, then just press it down in the hole (That's what she said)... Hope that works for you!
Good idea! I'll try that. Thanks. haha
Yea, duct tape is a no go. I'm done trying. This is way too frustrating. I'm about to just throw the damn phone across my room.

reduce back cover creak

Not sure who has this problem, but my phone tended to "creak" when pressed at certain points. I decided to figure out why this was happening. Turns out the battery itself has a little more motion than ideal and the phone was making the creak noise with the back cover off when i pushed on the battery.
My simple fix was to cut out a few pieces of paper the size of the battery and put them between the back cover and the battery.
This makes the phone feel much more solid. I'm sure tape would do the same thing. The trick is to find the right thickness between stopping the noise and still allowing the cover to fit on tightly.
mark9876 said:
Not sure who has this problem, but my phone tended to "creak" when pressed at certain points. I decided to figure out why this was happening. Turns out the battery itself has a little more motion than ideal and the phone was making the creak noise with the back cover off when i pushed on the battery.
My simple fix was to cut out a few pieces of paper the size of the battery and put them between the back cover and the battery.
This makes the phone feel much more solid. I'm sure tape would do the same thing. The trick is to find the right thickness between stopping the noise and still allowing the cover to fit on tightly.
Click to expand...
Click to collapse
I haven't had the same issue, but on my first Dinc 4G, the back case immediately next to the volume rocker was slightly loose, and I could press on it and feel a similar creak to what you're talking about. I traded it in after a week because of a few other issues, and this new one doesn't have that same problem. I didn't do anything to try to remedy it, so I don't know the best solution.
theres now 4 inc4g ltes within my family lol.
the creek is only noticeable on two of them.
My solution to the creaky problem was to take the cover off and cover the little dimple thingies with electrical tape.
Works like a champ.
Sent from my ADR6410LVW using Tapatalk 2
I take a more simplistic approach for all the phones i purchase and issue here at work. Peel off 3 of the small postit notes, stick it on the battery, no creaks, groans or otherwise irritating sounds.

How I fixed my headphone jack on my phone.

So, I was never a believer when I heard of people cleaning the lint out of their headphone jacks and getting them to work again.
That is, until I found a quick and easy solution to fix it. I've read of people using compressed air, paper clips and electric parts cleaners. So I had some duct tape handy and an idea popped into my head. I took a small strip of tape and twirled it into a small enough stick shape, inserted it into the jack and turned it and pulled it out. I did this several times removing a tiny amount of lint each time. The amount of lint that I pulled out was so small that I didn't think it was going to make a difference. Then I plugged in my headphones and, bam, they worked like new!
As a side note, the jack on my phone is loose and wiggly, so naturally I thought that maybe the connections inside the phone were loose and I was going to have take the phone apart to try and fix it. My headphones would connect and disconnect whenever I would wiggle or even touch my headphone jack and it gradually got worse. Then one day it stopped working altogether.
This is not some gimmick. Give it a try. And never insert anything metal or sharp into the jack. You could damage the contacts.
Sent from my DROID X2 using Tapatalk 2
Juice3250 said:
This is not some gimmick. Give it a try. And never insert anything metal or sharp into the jack. You could damage the contacts.
Click to expand...
Click to collapse
I'm a diehard lurker, but I have to bump this. Just fixed the exact same issue on a heavily abused Razr Maxx that I'd received from a friend, after months of dealing without headphones.
If you shine a light into the headphone jack and can't see the contacts at the very bottom, it's definitely lint that's keeping the jack from working. Personally, I had to use a paperclip to loosen it up a bit, but I'm pretty sure mine was a special case. Don't attempt with anything metal/sharp unless you have a light touch, and the tape on its own isn't helping.
I just tried this method on my Xperia Sola and it worked , I just reverse wrapped a duct tape on a piece of tooth pick so that the sticky part is outside and I entered it through the hole and turned it and pulled it out multiple times till all the Lint(en.wikipedia.org/wiki/Lint) were gone.
It cleaned the inner part and now it is working like new.
Simple but effective fix!
I was about to send my Xperia Z1 Compact for repair for this very reason, but I stumbled across this post. Thanks so much! Saved me a lot of hassle and embarrassment. A big ball of fluff came out of the headphone jack and now the sound is great. Cheers!
tahsnks for the idea, i finally used a standar pin with electrical tape around it and worked great!
Never had a problem with my DX2, but used this with both my Droid 3, and Droid 4
Problem solved
I was about to throw my nexus 5 out the window because of the issue with the headphones and i didnt want to i already had thrown out a previous cellphone because of this. I just turned off the phone ( paranoid paper clip or something could make contact with something and mess it up. And started to slowly pick and poke away. The amount of lint I pulled out was unbelievable! I didn't stop until i saw a shiny bottom. Now it's works perfectly fine . someone should invent something to either prevent this or an item to clean it. Just saying. Thanks!
Wooh! a big as$ thank you man! the way you worded your post was the only thing that made me give this charm a try. Now I'm the lucky owner of TWO working headphones haha
Mine does not have lint.I have cleaned it. But still it does not produce sound when I plug the earphone. I have to hold the earphone tightly to connect fully with the audio jack. Can you help me guys?
I tried this and I was able to clean out some lint, it helped some, but I still have to push it one way to get sound

[Q] Dust Proofing/Resistance

Hi XDA! Apologies for my ignorance as I have not found any search results for my curiosity. As you know, Z2 is dust proof. My question is, what in the world you need a dust resistant phone for? Hahaha.. Yes its a good feature but please enlighten me. I have an S4 which is not a dust-resistant phone and I never had a problem with dust so far.
Thanks in advance.
I have no idea
Sony claim dust sticks less on surfaces and hardware is affected less by dust
I dont see how dust can realy do much so im on your boat too
Well in the PC world if you get dust inside your case it will run hotter. Also dust can catch on fire if hot enough.
All i can say is, it's not fustbresistant around the edges, I get plenty of dust around the edge of the screen. A run under the tap fixes that though haha
Sent from my D6503 using xda app-developers app
I kinda get the idea. So dust resistant means not much dust will stick on the screen? Like rubbing it on a dusty cloth/carpet means dust wont stick? hmmm... lol.
What? No, it has to do with the classifications of the certification. Tell me, how do you make a device waterproof without having it also dustproof?
Dust can get trapped in places such as the headphone jack, speaker and microphone grills, sides of the buttons and beneath the flaps after they've been opened and over time, if not maintained, can cause wear and tear.
Find a contractor with a phone that has a removable battery & remove the cover. You'll usually see a ton of dust fall out. It can actually cause SIM/memory card read problems.

Categories

Resources