When I connect wall charger to my galaxy i9100 it notify that charger is connected and charging indicator also tells that it is charging BUT it is NOT charging. THe battery level's going down as the time passed ....
But strangely when I connect it to my PC via USB cable it actually starts charging ...
There's nothing really running as some of u might be thinkin that an app might be using high CPU while charging ... but it is not the case as it is charging fine when connected to PC.
I think my wall charger is faulty... but if it is then why it shows charging when connected though its NOT charging the battery at all?
Any help???
---Anupam
Hi, i cant charge my photon and pc does not recognizes it. I tried red wire and black wire to charge the battery it worked for battery charged about 50 percent but again when i plug charger it does not charge and also no usb conn. Pls help me
I have an unrooted Samsung Galaxy Tab 2 7.0 wifi which is running the most current updates. I plugged it in to charge and the next time I went to use it it would not turn on. When I plug it in it does not show a charging indicator. I have tried to hold the power button and volume button alternately and every combination possible with no results. I have plugged it in using on the USB cord to see if the AC adapter was bad. I have unplugged the battery for a period of time as I have found elsewhere with no success. The only thing I have not tried is a different USB cord. A final bit is that recently when charging with the device off the battery has been yellow rather than green. To me this points toward a battery failure, can someone enlighten me as to what could be wrong with the device?
Hi, please stick with me a minute!
I was gifted (elderly, but usually savvy aunt) an early droid razr after battery fail (and verizon replacement to a newer phone).
I was given an XT912, with 98.72.16.XT912.Verizon.en.US installed.
Also: cable marked: Motorola Data Cable SKN6428A 12150-0403532 and
double usb wart, folding prongs: SPN5689A 11268-C6-0821306-13D1 DC4050US0305.
It would only run when I pinned an USB cable directly to the battery terminals.
Battery would not charge, so I ordered another.
Now, new battery is in, and it will run from battery (still open back).
Wall wart/cable shows NO indication it is charging - white LED blinks on insertion (often starts), and that is it - no other lights, no charge icon, no charge text (Battery applied voltage does not change.).
USB to to computer shows no lights, DOES show charge icon, DOES show charge text (I can see battery applied voltage go up a bit with meter).
Is this all normal?
Is it the right cable for wall and USB use? Was there only 1 in OE box?
(I'm very suspicious because this cable/wart WILL charge my N7, but not this droid razr.)
Is there a special cable for wall wart? Pinout?
(I tried re-flashing existing OE rom, same results.)
THANKS ANY AND ALL!
OK, I flashed a couple of more times, and now I get a steady white light on wall/usb insertion, still no charge icon, no charge text.
Is there supposed to a (while off) charging screen? After short push?
THX
Hello,
I'm new here and I'm struggling about this problem:
I need to use and OTG cable and in the same time charge the device.
I bought an OTG + Charging cable, but the device is not charging (but otg function is ok).
I'm wondering if I need a custom firmware or a patch to get it working.
P.S: I just tried the cable on my Samsung Galaxy s3 mini and it's charging
Thank you.
Marco.
Please help!
I noticed that if I insert the Y cable when the tablet is turned off, It shows a black-white battery icon with lightning bolt.
But if insert directly the charger it show a colored green filling battery icon.
Maybe the Ampere is not enough?