Samsung Galaxy S3, SGH-I747M, Rogers
I used Odin to root my phone with root66_RWC_I747MVLDLK4.tar.md5 (followed instructions properly) about 8 times so far, wont boot past Samsung logo. Odin says the load was successful each time.
I read somewhere to try using Odin to load CF-SGS3-v5.5.v1.0.tar and booting into recovery mode, but it wont work either.
I have no idea what else to do, cant get to recovery mode, cant get past Samsung logo. (Living in Canada on Rogers)
mello2912 said:
Samsung Galaxy S3, SGH-I747M, Rogers
I used Odin to root my phone with root66_RWC_I747MVLDLK4.tar.md5 (followed instructions properly) about 8 times so far, wont boot past Samsung logo. Odin says the load was successful each time.
I read somewhere to try using Odin to load CF-SGS3-v5.5.v1.0.tar and booting into recovery mode, but it wont work either.
I have no idea what else to do, cant get to recovery mode, cant get past Samsung logo. (Living in Canada on Rogers)
Click to expand...
Click to collapse
Wrong forum this is I9300 read sticky top of the page .
jje
Related
I tried to upgrade my phone using odin, i first tried to root by installing a kernal.
after installing the kernal to enable rooting ...it is now stuck on boot screen with samsung galaxy sII logo.
i cant even get into recovery mode.
i can get into download mode.
I dont know the exact model of my phone as i did not write it down.
The phone is factory simfree, from carphone warehouse.
i tried downloading different stock roms but everytime i try to update using odin..it always fails.
NOT TO WORRY....I FIXED IT BY DOWNLOADING THIS FIRMWARE http://androidfirmwares.net/PhoneFirmware/Download/67
GT-I9100_CPW_I9100XWLP7_I9100XXLPS_I9100CPWLP5.7z
...cant delete post...dont know how to
help please!!
My phone is currently stuck at the "Samsung Galaxy S II" logo when booted and it won't go past that. I can't get into recovery mode and download mode.
SuperSU had an update and I accidentally pressed "twrp/cwm" instead of "normal" which made my phone reboot and has been stuck at the Samsung logo at boot up since then.
How may I be able to rectify this problem? I'd appreciate your advise.
Btw, I'm using Siyah-v3.2.6.4.
You don't say, but do you have the SGH-I777 AT&T version of the S2?
You need to be able to access download mode, and then flash stock firmware, or stock plus root.
It is highly unusual for the phone to boot to the Samsung screen, but not be able to access download mode. Are you sure? Please describe in detail what method you are using to access download mode.
Samsung prevail sm g360p stuck in Odin mode "downloading" screen, "could not boot etc
I bricked my Galaxy Prevail g360p and now my phone is stuck on the ODIN Download screen and says it can not boot normally...seems like the usb port is just not functioning at all. ODIN doesnt recognize the phone anymore even tho its stuck in download mode. I tried flashing an appropriate TWRP recovery with Flashify, now stuck... There must be a way to fix this way to fix this.. Please help, Tim
Timdawg42 said:
I bricked my Galaxy Prevail g360p and now my phone is stuck on the ODIN Download screen and says it can not boot normally...seems like the usb port is just not functioning at all. ODIN doesnt recognize the phone anymore even tho its stuck in download mode. I tried flashing an appropriate TWRP recovery with Flashify, now stuck... There must be a way to fix this way to fix this.. Please help, Tim
Click to expand...
Click to collapse
http://forum.xda-developers.com/general/help/samsung-sm-g360p-recovery-brick-t3248692
Timdawg42 said:
I bricked my Galaxy Prevail g360p and now my phone is stuck on the ODIN Download screen and says it can not boot normally...seems like the usb port is just not functioning at all. ODIN doesnt recognize the phone anymore even tho its stuck in download mode. I tried flashing an appropriate TWRP recovery with Flashify, now stuck... There must be a way to fix this way to fix this.. Please help, Tim
Click to expand...
Click to collapse
Thats not odin mode you have to physically put it in odin mode. Power down device hold home + vol down button in order to get com connection for odin to work
Hello;
I rooted my samsung galaxy s4 using king root app. And I installed CM12.1 unofficial (My s4 is GT I9500 black version).
While I was using my phone battery drained off and the next time I tried to boot my phone it got stuck in the Samsung black logo screen. I tried to break the boot loop by trying to get in to the recovery mode {volume up+power+home} but it resulted in continuous booting then I tried with the volume down button but then it got into the donot turn of the target mode.
Currently my phone is in a brick mode .So please do help me, my whole office files are inside the phone
Unfortunately there is not a way to retrieve your data at this stage. You should be able to recover it by flashing the stock firmware via Odin or using Samsung Kies.
Please EXPLAIN
es0tericcha0s said:
Unfortunately there is not a way to retrieve your data at this stage. You should be able to recover it by flashing the stock firmware via Odin or using Samsung Kies.
Click to expand...
Click to collapse
I am new to this section, can you please tell to me what should I do and how can I make my phone work again
http://forum.xda-developers.com/showthread.php?t=2265477
i was following a tutorial to root a samsung galaxy tab 10.1
but after flashing the custom recovery the tab is now stuck on the teamwin logo i have no way to get out of it even after rebooting and i cant get the computer to recognize the device. does anyone know a fix for this
This is the wrong forum. You are in Galaxy A Series (A3, A5,A7) forum.
Have you tried booting into download mode and then reflashing the stock firmware? You can download stock Firmware at sammobile.com (or any other site). Just read a guide for it.
If thats not working then your device is probably "dead"