Hey guys,
Just rooted my phone today, and have had a pretty bumpy time. I've made it through most of it, but am having trouble getting a new ROM installed (NilsP's Business ICS Sense 6.4). Basically, install is going fine, but when I make it to the ROM, I get no cell signal, no data, and gps won't turn on.
I'm running S-on, and the install will complete and it will automatically reboot to hboot for the kernel. However, nothing happens that indicates that the kernel installed. Upon reboot, the ROM will open, I'll skip through the setup wizard, and once out cell, data, and gps fail to turn on.
I tried placing the kernel's zip file directly onto my SD card's root drive. Once booted to hboot, the kernel will install. However, problem will persist. I updated to 6.4 OTA with no change. I tried disabling the Fast Boot option and cycled various settings, as suggested in NilsP's original thread. Prior to rooting, I had the most current update from Verizon (pushed through about a week or two ago). I even tried installing with the s-off option, which gave the same result.
I spent about five hours today searching these forums, as well as others, for a similar issue but was unable to find one. Until I figure out a way forward. I feel like I'm missing something simple, since I'm almost there! As I said, I'm a newbie, so forgive me if I misused any terms. Any and all help would be greatly appreciated!
flash stock recovery and do factory reset.
Damasterjj said:
flash stock recovery and do factory reset.
Click to expand...
Click to collapse
from the HBOOT
But first... did you put the back cover on again? The antennas are in there so you won't get any service without it on.
feralicious said:
But first... did you put the back cover on again? The antennas are in there so you won't get any service without it on.
Click to expand...
Click to collapse
Yup, tried with the lid back on, too. Figured there must have been an important circuit with all those contacts in there.
I'll try the reset from HBoot later this evening. I wiped every time I tried to reflash the OS, though only from the recovery menu. I'll let you know how it goes.
Thanks for the help guys, it ended up installing just fine after a factory reset from Hboot. Now I'm running into the same Play Services issue as everyone else using this ROM. Go figure. I'll monitor NilsP's original ROM thread for a solution. Looks like he's working on it already.
Related
I Have restorted to being the noob that signs up to ask a question...The other day I was driving (pre-root) and I look down to notice my phone had power cycled on its own. I thought it would come back one, boy I was wrong....
It spiralled into endless boot cycle. It would at first reboot get to the 4g screen and then back to the htc...over and over. I was able to get into Hboot, and atempt to do a factory reset that didnt help because it became a endless reboot that way as well.
Now before any of you say "why dont you warranty replace the phone" Im a VZW agent, alas we dont have a warranty on our phones when it comes to our concessions lines...
Now, at that point I said enough is enough and I delved into the world of rooting. I self taught everything within a few hours. I had my phone unlocked and ready to go. I picked Ineffabile (http://forum.xda-developers.com/showthread.php?t=1420513) to use as a rom, I followed the procedure to a T it installed correctly, but then when it came back on everything seemed to work fine...for about 5 minutes and then it happened agian a power cycle all over again. and again...and again. It now comes on works for about 5mins and then reboots.
Im at a complete loss at this point I have gone back into the SD card and deleted the ph98 file etc.... I just dont know what to do. I need this phone to work.
Any help is appreciated Thank you so much!
I know you said it's not the wcdma problem but will your phone stay booted with the back cover off?
Else I'd ruu back to stock. Could try the different radios and see if it helps.
If you want to try the older radios and are on the OTA you'll have to hexedit you mainver. There's a guide if you look.
older radios? Im still new to this so I applogize...
A couple weeks ago there was an OTA (over the air update) that updated the radios - what controls the calls part of your phone and can affect reception and other stuff, I don't know everything it does. So if you wanted to try the older ones there's a thread somewhere, I think by con247, that has the older ones.
Here's a couple guides to help you get familiar with rooting stuff:
http://androidforums.com/evo-3d-all-things-root/389787-beginners-guide-rooting-android-devices.html
http://androidforums.com/evo-4g-all-things-root/129648-quick-intro-rooting-those-new-rooting.html
You can try flashing the kernel again. Sometimes bootlooping is a kernel issue, although it doesn't seem to be the cause of your situation.
How about insurance? Do you have that? Can you still get it?
feralicious said:
A couple weeks ago there was an OTA (over the air update) that updated the radios - what controls the calls part of your phone and can affect reception and other stuff, I don't know everything it does. So if you wanted to try the older ones there's a thread somewhere, I think by con247, that has the older ones.
You can try flashing the kernel again. Sometimes bootlooping is a kernel issue, although it doesn't seem to be the cause of your situation.
How about insurance? Do you have that? Can you still get it?
Click to expand...
Click to collapse
I dont have insurance =/ and cant get it either. Im trying to find the radios, and what kernal should I be flashing? because I cannot find the one that should match the rom im using.
What I dont understand is why the phone powers on, works for a few moments like nothing is wrong what so ever. Then freezes and reboots.
Oh, there's a new way of packing a ROM with a script that then installs the kernel so I guess it's all together now on Ineffabilis. Here's a link to the MikMik forum where they still have the stock rooted kernel as a separate download:
http://themikmik.com/showthread.php...-Beats-Tweaks-2-01-605-11&p=164906#post164906
Just take off the part of the name before PH98IMG.zip, put it on your external sd card. Do a battery pull, then reboot into bootloader by holding volume down + power. It will flash it and I think reboot. Then delete the PHzip file after that.
Don't know if it will help...
Oh... when you flashed Ineffabilis, did you restore any data from a backup? If yes, try flashing again and not restoring any data, just set up everything again manually. Also, if you restored any data from another phone's backup that could have caused problems. Basically you don't want to restore data from a different ROM.
feralicious said:
Oh, there's a new way of packing a ROM with a script that then installs the kernel so I guess it's all together now on Ineffabilis. Here's a link to the MikMik forum where they still have the stock rooted kernel as a separate download:
Just take off the part of the name before PH98IMG.zip, put it on your external sd card. Do a battery pull, then reboot into bootloader by holding volume down + power. It will flash it and I think reboot. Then delete the PHzip file after that.
Don't know if it will help...
Oh... when you flashed Ineffabilis, did you restore any data from a backup? If yes, try flashing again and not restoring any data, just set up everything again manually. Also, if you restored any data from another phone's backup that could have caused problems. Basically you don't want to restore data from a different ROM.
Click to expand...
Click to collapse
This is a clean SD card, and I didnt create a backup because I couldnt get the phone past Hboot when it was doing boot cycles previous to the root. I re-ruu'd right now. And im starting from scratch. I used clockwork before, Im trying amon ra now.
So i would like to apologize first off by saying i am a complete and total noob in every sense of the word. This is the first time trying to root any phone. ok so heres the deal, the phone powers up... FINALLY... and will load to the homescreen but reboots the device. I used the BAMF ICS rom and put in a PGIMGnewfirmwarepeople.zip... ive tried to do the *#*# but as soon as i bring it up i can only get maybe the * or at best the *# but then it reboots itself. I mess with cars on a daily basis but unlike a car part i cant bang or heat up the phone to get the desired result. i attempted to do this since i saw the video on the rezound redifined 4.0.3 ICS with nova launcher.. it was a video by driodzero?
i have no idea where to go from here... i would greatly appreciate any help anyone can provide
If it is indeed a network bootloop, try booting with the backpate removed. As long as the network signal isn't overly strong it should be able to get you in.
i think that was one of the things i did... i tried to let it boot with the back off, then with the back off and SIM card out... but to no avail. is there a way to somehow cmd prompt the *#*# in order to switch the problem... i dont know if this helps but it is S-ON
No SIM means no signal, which means no network bootloop. Must be another cause. Looking at the Bamf ICS thread, did you upgrade your firmware to ICS properly first. Hmm.
i will go back and look.. the problem is it will not let be go back and down grade img file...
twd420 said:
i will go back and look.. the problem is it will not let be go back and down grade img file...
Click to expand...
Click to collapse
Yeah, S-off is suggested eventually since it allows you to downgrade from the leaks. Risk of perma-brick in certain situations, like flashing a bad download of radios. But it helps more than hurts to have that freedom.
On S-on you also need to make sure the boot.img gets flashed seperate in the bootloader for a given ROM.
thanx i will try the wire trick to get it to S-OFF but right now i cant even get the phone to power up to the home screen
You can check the hboot/radio version in the bootloader to confirm firmware version. See what it says there.
Would attempt a clean reinstall of the ROM if it is indeed on ICS (hboot 2.21 or 2.25) firmware proper.
Then make sure to wipe system, davik-cache and cache, flash ROM twice, the patch Joelz has, and flash the boot.img as a PH98IMG.zip in bootloader. Then boot the ROM up.
i would definitely try that except i can not get it to power on, nor can i get it to charge... i think its bricked, since ive even gone to the standard battery as well as using different chargers. i greatly appreciate your insight
twd420 said:
i would definitely try that except i can not get it to power on, nor can i get it to charge... i think its bricked, since ive even gone to the standard battery as well as using different chargers. i greatly appreciate your insight
Click to expand...
Click to collapse
Did you use ClockworkMod by any chance? My first Rezzy charging capability fried on its own eventually, but aside from hardware failure: that recovery has been reported to have issues when battery drains down...
Excuse me if I missed an existing thread with this issue, I have looked and didn't find one with exact problem.
It seems everyone else has one of the two problems, not both.
As the title claims, when I turn on my phone it freezes on the white background-green htc screen and won't load the OS.
I tried removing the batter then turning back on with power-volume down but nothing happens. That hboot menu doesn't show up.
As soon as I let go of the buttons, it attempts to start up normally then freezes again at the same screen.
Last night I rooted my phone (first time I've ever rooted) and installed SolidRom Suite ICS Sense 3.6 and it worked perfectly.
I then removed battery, went into hboot menu, cleared the catches and did a factory reset. I then attempted to install the SolidRom Suite JB 4.1.1
This is when it loaded the white screen-green htc and froze. I thought it was loading the rom slowly (First time like I said, I didn't know what to expect)
It was 2am so I just fell asleep. I woke up to a dead phone. I plugged it in to a charger and have been attempting to get access to the phone all morning with no luck.
CDMA (Sprint)
s-on
hboot 1.58
2.87
4ext
Any other information you need? Any and all help would be appreciated. Thanks in advance.
I just hope I didn't kill my phone
While rooting last night, I was using a youtube video as a cross reference to the directions I was using from AFs.
I asked the creator of the video the same thing and this is what he replied with
DON ,T BE SCARED (are u?)
this thing is called BOOTLOOP
the rom has problems OR U DID NOT FLASH THE KERNAL!!!!
to flash the kernal u need a working software and install an program called flash image gui
restore your nandroid back u created before flashing
DID U MADE A NANDROID BACK UP
If no
then u need to download the ruu image of your phone GOOGLE TIME keep searching until u got one
Click to expand...
Click to collapse
1-I didn't know I needed to flash the kernel if I was going to stick with the one provided with the custom ROM (is that a gross conceptual error?)
2-If I do need to flash the kernel first... I have no idea how.
3-I looked up flash image gui and all the instructions assume your phone is working fine so I'm not sure what I'm suppose to do with that.
I was so excited when the first rom (ICS) worked... guess that's what I get for then trying to upgrade to JB.
Thanks a lot guys. That noob video I watched to register on this site is so spot on.
update: I finally figured out how to fastboot. I keep trying clear caches then factory reset. I install new rom and then it bootloops again. What am I doing wrong?
I recommend you follow ramjet's guide here: http://forum.xda-developers.com/showthread.php?t=1889438
It will reset your phone back to stock (hopefully stopping the bootloops) and then get you s-off using the wire trick. This will allow you to flash ROMs without worrying about flashing kernels. It will also allow you to change hboots, which I think was what caused the issue in the first place. I think all the jb ROMs don't boot on hboot 1.58.
I was able to return the phone to factory settings. I then retried and now I get past the splash screen and am frozen at the next Sprint screen.
I'm still at it. I'll get it eventually.
ackNalej said:
Excuse me if I missed an existing thread with this issue, I have looked and didn't find one with exact problem.
It seems everyone else has one of the two problems, not both.
As the title claims, when I turn on my phone it freezes on the white background-green htc screen and won't load the OS.
I tried removing the batter then turning back on with power-volume down but nothing happens. That hboot menu doesn't show up.
As soon as I let go of the buttons, it attempts to start up normally then freezes again at the same screen.
Last night I rooted my phone (first time I've ever rooted) and installed SolidRom Suite ICS Sense 3.6 and it worked perfectly.
I then removed battery, went into hboot menu, cleared the catches and did a factory reset. I then attempted to install the SolidRom Suite JB 4.1.1
This is when it loaded the white screen-green htc and froze. I thought it was loading the rom slowly (First time like I said, I didn't know what to expect)
It was 2am so I just fell asleep. I woke up to a dead phone. I plugged it in to a charger and have been attempting to get access to the phone all morning with no luck.
CDMA (Sprint)
s-on
hboot 1.58
2.87
4ext
Any other information you need? Any and all help would be appreciated. Thanks in advance.
I just hope I didn't kill my phone
Click to expand...
Click to collapse
You can't run JB on 1.58
http://forum.xda-developers.com/showthread.php?t=1808332
You need to flash 1.58, the new firmware to flash my Rom.
Click to expand...
Click to collapse
I'm amusing he's talking about hboot there. Am I wrong?
I'm about to try that wire trick. Regardless of everything else, it seems to make life easier down the road.
Please lock
OK. So. I've been encountering nothing but problems since I received my Huawei Ascend P2 phone.
To begin with -
I bought the phone for the sole purpose of it being 4G/LTE. When I got it, I couldn't figure out how to get it, so I contacted Three and was told that my phone had to be 4.3 - it was running 4.1.2.
When I tried to get 4.3 through whatever means, it stopped working.
I tried to do a complete factory reset and now I'm getting many more problems -
I keep getting errors that anything Google related has stopped working (especially Google keyboard).
My contacts won't auto-sync, despite me having my Google account synced up with it.
The icons at the bottom of the screen (back, home, settings/whatever else) won't light up and the home button isn't working.
It's a different loading screen than normal - before it was a Huawei Ascend splash screen, now it just says "Android".
It is not being detected by my laptop whatsoever.
When I try and download anything using a browser, it says "starting download" but nothing works.
So, anyone have a solution? It is driving me demented. And all because I wanted bloody 4G.
boneyarsebogman said:
OK. So. I've been encountering nothing but problems since I received my Huawei Ascend P2 phone.
To begin with -
I bought the phone for the sole purpose of it being 4G/LTE. When I got it, I couldn't figure out how to get it, so I contacted Three and was told that my phone had to be 4.3 - it was running 4.1.2.
When I tried to get 4.3 through whatever means, it stopped working.
I tried to do a complete factory reset and now I'm getting many more problems -
I keep getting errors that anything Google related has stopped working (especially Google keyboard).
My contacts won't auto-sync, despite me having my Google account synced up with it.
The icons at the bottom of the screen (back, home, settings/whatever else) won't light up and the home button isn't working.
It's a different loading screen than normal - before it was a Huawei Ascend splash screen, now it just says "Android".
It is not being detected by my laptop whatsoever.
When I try and download anything using a browser, it says "starting download" but nothing works.
So, anyone have a solution? It is driving me demented. And all because I wanted bloody 4G.
Click to expand...
Click to collapse
I think we need some more info on the attempt to upgrade via whatever means. What steps / guide were you following? Did you install a custom rom? If so, what rom and what recovery are you using? From a few minutes of searching around, it seems that there is no official 4.3 update for the phone, and just being ON 4.3 itself will not automagically enable LTE service as this has much to do with the radio/baseband used as much as the actual operating system and that will not get updated via a custom rom (99.999% of the time unless SPECIFICALLY stated). Seems like they are working on an LTE capable update/patch for 4.1.2 soon according to this: http://forum.xda-developers.com/showpost.php?p=50495570&postcount=162 (that post is part of a thread about your phone on a UK carrier so should be pertinent).
es0tericcha0s said:
I think we need some more info on the attempt to upgrade via whatever means. What steps / guide were you following? Did you install a custom rom? If so, what rom and what recovery are you using? From a few minutes of searching around, it seems that there is no official 4.3 update for the phone, and just being ON 4.3 itself will not automagically enable LTE service as this has much to do with the radio/baseband used as much as the actual operating system and that will not get updated via a custom rom (99.999% of the time unless SPECIFICALLY stated). Seems like they are working on an LTE capable update/patch for 4.1.2 soon according to this: http://forum.xda-developers.com/showpost.php?p=50495570&postcount=162 (that post is part of a thread about your phone on a UK carrier so should be pertinent).
Click to expand...
Click to collapse
Thank you for your reply.
I'll talk you through the steps I took as much as I can.
Firstly I rooted the phone using eRoot, which did work and allowed root access.
I then downloaded P2Tools, which was obtained from this thread and it allowed me to put CWM on it.
Once this was done, I attempted to put CM 10.2 on it, but kept getting a Status 7 error. Some quick Googling later, I discovered this video, which showed how to solve it.
When I followed the steps on there, I kept getting a Status 0 error.
That was when I started to encounter those problems, so I wiped everything I could, even system, but that part failed.
And that's about it.
boneyarsebogman said:
Thank you for your reply.
I'll talk you through the steps I took as much as I can.
Firstly I rooted the phone using eRoot, which did work and allowed root access.
I then downloaded P2Tools, which was obtained from this thread and it allowed me to put CWM on it.
Once this was done, I attempted to put CM 10.2 on it, but kept getting a Status 7 error. Some quick Googling later, I discovered this video, which showed how to solve it.
When I followed the steps on there, I kept getting a Status 0 error.
That was when I started to encounter those problems, so I wiped everything I could, even system, but that part failed.
And that's about it.
Click to expand...
Click to collapse
K. So you are still on the stock rom, rooted, with CWM recovery (which version?), and after you attempted to wipe /system, it failed to wipe (what was the error message there?), and now it boots and has all kinds of weird glitches? First thing to try would be to go back to CWM and wipe Cache and Dalvik Cache and then Fix Permissions. This MIGHT help. If it doesn't then you will just probably want to throw a stock rom back on there to get back to running right again.
es0tericcha0s said:
K. So you are still on the stock rom, rooted, with CWM recovery (which version?), and after you attempted to wipe /system, it failed to wipe (what was the error message there?), and now it boots and has all kinds of weird glitches? First thing to try would be to go back to CWM and wipe Cache and Dalvik Cache and then Fix Permissions. This MIGHT help. If it doesn't then you will just probably want to throw a stock rom back on there to get back to running right again.
Click to expand...
Click to collapse
I've wiped the Caches and Dalvik Cache and can't seem to find "Fix Permissions". I did some searching and it seems this feature was removed from CWM? I'm running v6.0.3.7 of CMW.
When I try to format the system, it says
E:format_volume failed to unmount "/system"
Error formatting /system!
Weird, they did take it out. Koush said it was a placebo. Which normally I would take as law, if it weren't for many times I have ran fix permissions and it caused apps that were force closing to not force close anymore. But whatever, if you wanna try, flash this: http://db.tt/9aWdF8Rp. It'll either help fix something, or do nothing. Won't make it any worse. If it can't mount to format though, it's either or a bug with CWM for your device, or after factory reset, reboot recovery and try again. But you really don't want to wipe /system unless you have a nandroid or another rom on your storage that is accessible.
Thanks so much for your help so far. Took me ages to figure out how to get that file on my phone, but I managed to do it. I then installed zip from recovery mode and chose the fix_permissions. Then reboot and it asked me to root the phone again. It's now upgrading and hopefully it will work now.
It is still saying "Unfortunately, Android keyboard has stopped" and other things. What do you reckon I can do now? You're right, it seems like I can't make it any worse.
boneyarsebogman said:
Thanks so much for your help so far. Took me ages to figure out how to get that file on my phone, but I managed to do it. I then installed zip from recovery mode and chose the fix_permissions. Then reboot and it asked me to root the phone again. It's now upgrading and hopefully it will work now.
It is still saying "Unfortunately, Android keyboard has stopped" and other things. What do you reckon I can do now? You're right, it seems like I can't make it any worse.
Click to expand...
Click to collapse
Ok. So looks like first thing to check is to see WHICH version of the P2 you have because it seems like there are at least 2 different sub versions of it. The P2-6070 and the P2-6011. Please go to Settings / About Phone/Device and let me know all the software info there.
Also, have you unlocked the bootloader (I'm guessing so since you have recovery, but just checking)?
I found some more info on how to get you back up and running, but want to confirm the system version so everything goes as smoothly as possible. There's a new update that just came out not too long ago that people are saying LTE works on, so hopefully we can get you to that point.
es0tericcha0s said:
Ok. So looks like first thing to check is to see WHICH version of the P2 you have because it seems like there are at least 2 different sub versions of it. The P2-6070 and the P2-6011. Please go to Settings / About Phone/Device and let me know all the software info there.
Also, have you unlocked the bootloader (I'm guessing so since you have recovery, but just checking)?
I found some more info on how to get you back up and running, but want to confirm the system version so everything goes as smoothly as possible. There's a new update that just came out not too long ago that people are saying LTE works on, so hopefully we can get you to that point.
Click to expand...
Click to collapse
Mine is the P2-6011.
Swear if we get this working, never changing anything ever.
Yes, the bootloader is unlocked.
Alright, so here is a link for the newest firmware for your phone :
http://huaweidevices.ru/ROM4221/P2/...R001C00B038CUSTC19D001_United_Kingdom_H3G.rar
Need to be on stock recovery. Unpack the rar file and put the whole folder /dload on the root of the SD card. This has the update.app that should take care of everything for you. Turn off the phone and turn it on by holding Vol + and - and Power together. This is supposed to boot it into the mode to take care of the update for you.
If you don't wanna go back to complete stock, I have another way that involves switching to TWRP recovery and restoring a rom via nandroid restore. If you'd prefer that, lemme know and I'll shoot you the links.
es0tericcha0s said:
Alright, so here is a link for the newest firmware for your phone :
http://huaweidevices.ru/ROM4221/P2/...R001C00B038CUSTC19D001_United_Kingdom_H3G.rar
Need to be on stock recovery. Unpack the rar file and put the whole folder /dload on the root of the SD card. This has the update.app that should take care of everything for you. Turn off the phone and turn it on by holding Vol + and - and Power together. This is supposed to boot it into the mode to take care of the update for you.
If you don't wanna go back to complete stock, I have another way that involves switching to TWRP recovery and restoring a rom via nandroid restore. If you'd prefer that, lemme know and I'll shoot you the links.
Click to expand...
Click to collapse
If I ever meet you I definitely owe you a drink. Did exactly as you said and everything (from what I can tell) is working.
It's one of the things I love about Android phones - unless you do some serious damage to it physically, for the most part it is fixable.
So, thanks button isn't enough - you saved me giving up and buying a new phone
*Hi Five* Glad all is well!
But yea, I do this for a living. Seriously. Helping people on here is how I stay sharp. lol
getting a gateway 504 error from link to firmware, would love to get this update working as i keep getting a notification on phone saying update available but it wont work
boneyarsebogman said:
Thank you for your reply.
I'll talk you through the steps I took as much as I can.
Firstly I rooted the phone using eRoot, which did work and allowed root access.
I then downloaded P2Tools, which was obtained from this thread and it allowed me to put CWM on it.
Once this was done, I attempted to put CM 10.2 on it, but kept getting a Status 7 error. Some quick Googling later, I discovered this video, which showed how to solve it.
When I followed the steps on there, I kept getting a Status 0 error.
That was when I started to encounter those problems, so I wiped everything I could, even system, but that part failed.
And that's about it.
Click to expand...
Click to collapse
Can you post the link of the CM 10.2 rom For huawei P2.
I search for a long long time. but still dosnt found a rom.
Thx
Sorry for digging this up but does someone have the stock ROM of the P2? Im stuck like the fella who started this thread and havent found the stock ROM anywhere.
Thanks for the attention.
Ok, I have 2 Rezounds. Rooted mine, went s-off and loaded Liquidsmooth and Gaaps. Everything works fine after 1 week.
Went and did second phone (wife's) and everything seemed to go well, but I had 1 thing occur in this phone that did not happen in my phone. When in HBoot, it would constantly update and then force a restart. I couldn't get into Recovery, and my phone would not be recognized as an ADB device. Googled around and think it was something related to the PH98IMG file, so I deleted that off of my SD Card and bingo it worked.
So I flashed AICP KitKat and its Gaaps. I thought all was well until my wife tried to call someone and the screen blacked out (call was being made) and then the camera launched. We could not unfreeze the screen, even holding Pwr button - had to pull the battery.
I assumed it was the ROM, so I loaded CarbonROM - same thing.
I reset to factory, wiped everything and retried, same thing.
I restored my factory backup latest OTA (ICS), and it worked fine. I reinstalled my Amon recovery file. Rest phone again, and reloaded. Same problem - my phone screen locks up on outgoing calls.
Help..........
One thing, I assume you can flash the ROM and Gaaps back to back with no reboot. I did this, but also wiped all data and reinstalled them separately with a reboot between. Same results.
one additional item
Not sure why, but no matter how I reset or wipe, my contacts always reload. I am not selecting Google backup when going through setup screen. I have reset and wiped all cache, dalvik cache, and all other.
briggss3 said:
Not sure why, but no matter how I reset or wipe, my contacts always reload. I am not selecting Google backup when going through setup screen. I have reset and wiped all cache, dalvik cache, and all other.
Click to expand...
Click to collapse
Google will always restore your contacts, even if you uncheck the backup/restore options, they are part of your Google account.
As far as your other issues, it kind of sounds like a proximity sensor issue, try installing https://play.google.com/store/apps/details?id=com.incredicontrol.ProxSensorCalibrator&hl=en and see if you can calibrate it... although this doesn't explain the camera issue, it does explain why the screen goes blank during a call and will not come back on.
I wonder also if my HBoot was corrupted. I don't know why, but when I booted into Bootloader, it would go through the motions of updating and then prompting me to restart (no other option). I read that this was because my Bootloader was finding a PH98IMG file on the SD card - is this an update exe? So I deleted it and Bootloader worked.
Also, both phones hung up (dots) on Rumrunner "Pouring 2" phase, and I had to break the connection during this step. Rebooting showed s-off, but I reran the exe file and it went through and completed "successfully."
Is there any need to update my recovery file, currently Amon RA which i did from Scotty's Newbie Guides? I downloaded 7.2.2.2 TWRP and tried to flash it in recovery, but it says fail. I can not find instructions on doing this for newbies - only the one that references s-on users, but it just glosses over.
I'll do the Play store download and see if that works.
Thanks for your help. I am totally a novice, although I have learned alot after going through this. I read alot on the Android Forums and XDA before I post.
AmonRa could be your whole problem actually... Get TWRP 2.7.1.1 and either flash it via Fastboot, use the PH98IMG way, or try Flashify as a last resort.
The chances that your Hboot is corrupted is slim, but you can download the firmware zip from 4.5.605.14 and reflash with no issues, it will not change S-Off or unlock state.
Updated TWRP and tried the resound calibrator, still same bad result. Phone will work on the OTA recovery file (ICS), but will not work on any kitkat ROM installs. When making calls, I can not power off or anything, total loss of phone while call is active (unless I pull battery). Once call is hung up, then I get control back of the screen.
I can't seem to find anything, should I go s-on then relock and unlock it again maybe? If you think that's a good idea worth trying, let me know and I'll search for instructions on how to do that.
More I think about it, its proximity sensor issues. I replaced the glass just before rooting. I downloaded the calibration app, but can't find instructions. I will play around with that a bit and see what happens. I'll post back if I can't get that to work, I may have replaced the adhesive too close to (or touching) the sensor in the ear piece.
briggss3 said:
More I think about it, its proximity sensor issues. I replaced the glass just before rooting. I downloaded the calibration app, but can't find instructions. I will play around with that a bit and see what happens. I'll post back if I can't get that to work, I may have replaced the adhesive too close to (or touching) the sensor in the ear piece.
Click to expand...
Click to collapse
You can find more info here: http://forum.xda-developers.com/showthread.php?t=1904974