Related
I can get back into recovery but ever since I've attempted to flash a costum rom such as Viper or Revolution it gets stuck in the splash screen.
I'm not sure whats going on but I can boot into AOKP. If someone can help me out with the appropriate steps to take to flash one of those roms OR to flash back to stock I'd really appreciate because I've been at this for a couple of hours now and my head is starting to hurt :/
You need to update your firmware to run a Sense 2.22 based ROM: http://forum.xda-developers.com/showpost.php?p=54408500&postcount=9592
From the linked post:
The issues you will see without the new firmware include long boot times with no boot animations and some users on 9.1 reported wifi and bluetooth issues.
redpoint73 said:
You need to update your firmware to run a Sense 2.22 based ROM: http://forum.xda-developers.com/showpost.php?p=54408500&postcount=9592
From the linked post:
The issues you will see without the new firmware include long boot times with no boot animations and some users on 9.1 reported wifi and bluetooth issues.
Click to expand...
Click to collapse
I see you helping a lot people here redpoint so first of all thanks.
I just used the RUU.exe to return to at&t stock software number 1.58.502.1
I've read exactly what you said about being on Sense 2.22 but that's where I'm not sure what to do since AT&T hasn't release 4.4.3 yet and theres nothing for me to update to.
Do I have to S-off to obtain Sense 2.22? And also how difficult is it to S-ON? Again thanks so much.
afrojoc said:
I just used the RUU.exe to return to at&t stock software number 1.58.502.1
Click to expand...
Click to collapse
Kind of did things the hard way, although you are back up and running. Now you will need to unlock the bootloader and install custom recovery again, to get back to where you were.
All you really needed to do was either restore your nandroid (you should always make one before flashing anything) or get a different ROM (Sense 1.xxx base) onto the phone and flash it.
Also, the phone was likely not really "stuck", just taking a REALLY LONG time to boot, like 10 minutes.
afrojoc said:
I've read exactly what you said about being on Sense 2.22 but that's where I'm not sure what to do since AT&T hasn't release 4.4.3 yet and theres nothing for me to update to.
Click to expand...
Click to collapse
The post I linked previously includes the specific firmware package for US users, and a link to detailed instructions. 2.22.1540 is what you want to use, its pulled from the US Dev Edition OTA. While its not the "official AT&T" firmware, the DE is identical to the AT&T version in everything except AT&T branding (band support, etc.) and designed specifically for use on AT&T. Users here (including myself) can confirm it works seamlessly on the AT&T version.
2.22.1540 is also specifically advocated for use on the AT&T version in the following ROM post, along with great instruction (this is personally the one I used). Although you have to download the whole ROM, as the firmware is packed with it:
http://forum.xda-developers.com/att-htc-one-m8/development/att-4-4-3-2-22-1540-3-debloated-sense-6-t2837365
afrojoc said:
Do I have to S-off to obtain Sense 2.22?
Click to expand...
Click to collapse
To update the firmware as I've described, yes. Reason being, the partitions that need to be updated by the firmware (radio, hboot, etc.) can't be modified without either S-off, or "official" update meant for your version.
The other option is to remain S-on and wait until AT&T releases the OTA. But who knows when that will be . . .
afrojoc said:
And also how difficult is it to S-ON?
Click to expand...
Click to collapse
S-on isn't really necessary. As long as you understand the implications of s-off, its usually better to be s-off. More freedom, and more options to recover if you have issues.
Also, AT&T doesn't care about s-off in terms of warranty service. They only care about physical damage or water damage.
afrojoc said:
Again thanks so much. I see you helping a lot people here redpoint so first of all thanks
Click to expand...
Click to collapse
No problem at all. I've benefited a lot from XDA, and its my way of contributing.
I have an M8 from AT&T, unlocked bootloader, rooted, and S-Off. Phone is running 4.4.3... the 2.23 sense, I got the update right before they pulled it. I want to go to newer roms,but they all use the 3.28 update, and AT&T hasn't gotten the update yet, but i'm having some major withdraws. I was just asking how to I go about updating? I saw a few posts but I am beyond confused.
dagriff1997 said:
I have an M8 from AT&T, unlocked bootloader, rooted, and S-Off. Phone is running 4.4.3... the 2.23 sense, I got the update right before they pulled it. I want to go to newer roms,but they all use the 3.28 update, and AT&T hasn't gotten the update yet, but i'm having some major withdraws. I was just asking how to I go about updating? I saw a few posts but I am beyond confused.
Click to expand...
Click to collapse
Wonders_Never_Cease makes it easy: http://forum.xda-developers.com/att-htc-one-m8/development/att-4-4-3-2-22-1540-3-debloated-sense-6-t2837365
Here I go again with an alternative that may be easier.
Being S-OFF is a plus but no mention of Supercid.
Below is super simple and requires the use of your external sdcard
http://forum.xda-developers.com/showthread.php?t=2824048
jball said:
Here I go again with an alternative that may be easier.
Click to expand...
Click to collapse
If someone can't handle fastboot commands, they should be flashing firmware at all.
It should be understood that flashing firmware is one of the riskier mods to do; and not to be taken lightly. Unlike flashing a ROM, root, etc., you can actually brick the phone flashing firmware, if you don't fully understand what you are doing.
@redpoint73
No need to quote me as I've agreed with you over and over about this very subject in multiple threads my friend. I can remember being new to all this and how intimidating anything to do with adb/fastboot or even the word commands would make me feel.we seem to end up following each other around quit a bit so let's not make it personal man as it do respect you.
AT&T HTC ONE M8
dagriff1997 said:
I have an M8 from AT&T, unlocked bootloader, rooted, and S-Off. Phone is running 4.4.3... the 2.23 sense, I got the update right before they pulled it. I want to go to newer roms,but they all use the 3.28 update, and AT&T hasn't gotten the update yet, but i'm having some major withdraws. I was just asking how to I go about updating? I saw a few posts but I am beyond confused.
Click to expand...
Click to collapse
The easiest way to upgrade the firmware is to get supercid and run the 3.28.1540.5 dev ed RUU. Worked like a charm for my AT&T m8
Supercid is not needed, BS_US001 or BS_US002 works fine
mattprice86 said:
The easiest way to upgrade the firmware is to get supercid and run the 3.28.1540.5 dev ed RUU. Worked like a charm for my AT&T m8
Click to expand...
Click to collapse
@Wonders_Never_Cease
Will supercid work as well?
jball said:
@Wonders_Never_Cease
Will supercid work as well?
Click to expand...
Click to collapse
Supercid will work for all cids. It's easier, Bc then you don't have to worry about changing it all the time to do different things. As wonders_never_cease mentioned, it's not necessary, however.
@mattprice86
Thank you for the answer ,I don't recall it mentioned that Supercid would work.
I figure why change it to a specific Cid if I can change it once
AT&T HTC ONE M8
jball said:
@redpoint73
No need to quote me as I've agreed with you over and over about this very subject in multiple threads my friend. I can remember being new to all this and how intimidating anything to do with adb/fastboot or even the word commands would make me feel.we seem to end up following each other around quit a bit so let's not make it personal man as it do respect you.
Click to expand...
Click to collapse
I am free to respond or quote others if I choose to (as are you). I was just raising a point, that IMO firmware (as I already explicitly mentioned) is not something to be taken lightly, and not something that should be made "easier". But just my opinion (and no more or less valid an opinion than yours).
There is nothing "personal" in my post directed toward you. Not a single thing that could be construed as a personal attack, insult, disrespectful, etc. If you took it that way, its your own interpretation.
There aren't all that many folks in the AT&T specific forum section willing to contribute help on a consistent basis, as you likely already noticed. The fact that I have responded to you on multiple occasions is merely a matter if that circumstance (just coincidence, really). Believe it or not, I'm not stalking you or anything. I would have responded/quoted you the same way regardless of whether I recognized your nickname or not.
Your contribution is certainly appreciated. I was just throwing in my 2 cents.
I have an HTC One M8 AT&T Branded but it has 4.4.2 on it and i wanna flash viperrom 3.2.1 but it requires androids 4.4.4 software. im S-ON, 3.16 Bootloader with 1.58.502.1 Software number. Baseband Version is 1.16.21331931.LA11G_20.31A.4145.02L. im just looking to Update from 4.4.2 to 4.4.4 but i cant seem to find out how. Any help would be great.
Perfect.
Unlock your bootlooader if you haven't already, fastboot flash recovery (TWRP/PHILZ),root using the chosen custom recovery,make a backup before or after root.
Go here http://theroot.ninja/ for Sunshine
S-OFF cause that's what your going to need to update as far as 4.4.4
Orrrr just wait a few days for the ATT 4.4.4 build to be released (ETA 29th) and then youll have 4.4.4 without having to do anything.
Wonders_Never_Cease said:
Orrrr just wait a few days for the ATT 4.4.4 build to be released (ETA 29th) and then youll have 4.4.4 without having to do anything.
Click to expand...
Click to collapse
That's a better idea for sure.
I haven't noticed if Sunshine has an update that works with 4.4.4 yet.
Are you S-OFF ?
What are the advantages/disadvantages of S-OFF so the OP knows what he might be missing.
Do you know when the Sunshine update will be?
Yup,no [email protected],[email protected],there are plenty of posts about advantages and disadvantages...my point of view is simple,it is not needed for the novice,ive seen too many mess things due to lack of knowledge. My usage of it is for switching between att and developer ROM's to get latest updates. Outside of that I dont mess with conversions,to risky for a 6-700 device. My advice is stick to htc dev unlocked bootloader and wait for official update.
jball said:
That's a better idea for sure.
I haven't noticed if Sunshine has an update that works with 4.4.4 yet.
Are you S-OFF ?
What are the advantages/disadvantages of S-OFF so the OP knows what he might be missing.
Do you know when the Sunshine update will be?
Click to expand...
Click to collapse
Wonders_Never_Cease said:
Yup,no [email protected],[email protected],there are plenty of posts about advantages and disadvantages...my point of view is simple,it is not needed for the novice,ive seen too many mess things due to lack of knowledge. My usage of it is for switching between att and developer ROM's to get latest updates. Outside of that I dont mess with conversions,to risky for a 6-700 device. My advice is stick to htc dev unlocked bootloader and wait for official update.
Click to expand...
Click to collapse
Cool thank you
Im not S-OFF but hell ill wait for the 29th to roll around and see if i have an update. Can you link me to the info stating its around the 29th?
darkninja908 said:
Im not S-OFF but hell ill wait for the 29th to roll around and see if i have an update. Can you link me to the info stating its around the 29th?
Click to expand...
Click to collapse
I didn't Google for to long but I haven't found concrete links that state the exact date .how many times have we been promised a date and watch it pass by anyways.
May I ask if you've modified any other device before this one?
I'm not trying to push,but S-OFF might be in your future and will not halt an OTA from installing.
The version your on is easily exploitable using "Sunshine" unless you take the soon to be 4.4.4 update.
Nobody knows when Sunshine will have an update even with the team working on it as we speak.
Wont be much on Google @date,came from somewhere else. And nothing is ever "concrete" with software,especially with carrier branded software.
jball said:
I didn't Google for to long but I haven't found concrete links that state the exact date .how many times have we been promised a date and watch it pass by anyways.
May I ask if you've modified any other device before this one?
I'm not trying to push,but S-OFF might be in your future and will not halt an OTA from installing.
The version your on is easily exploitable using "Sunshine" unless you take the soon to be 4.4.4 update.
Nobody knows when Sunshine will have an update even with the team working on it as we speak.
Click to expand...
Click to collapse
jball said:
I didn't Google for to long but I haven't found concrete links that state the exact date .how many times have we been promised a date and watch it pass by anyways.
May I ask if you've modified any other device before this one?
I'm not trying to push,but S-OFF might be in your future and will not halt an OTA from installing.
The version your on is easily exploitable using "Sunshine" unless you take the soon to be 4.4.4 update.
Nobody knows when Sunshine will have an update even with the team working on it as we speak.
Click to expand...
Click to collapse
I have Rooted, and flashed multiple ROMS to my old M7 before. Nothing crazy.
I as well have the same build, unlocked bootloader, flashed custom recovery. Will I have to return to stock recovery using 1.58.502.1 RUU and to get the OTA update to 4.4.4??
I'm trying to get the latest Android Revolution ROM for 4.4.4 but realized I was in a bit of a pickle. I'd like to take the path of least resistance on this one - any advice would be super appreciated. Thanks!
pmoser16 said:
I as well have the same build, unlocked bootloader, flashed custom recovery. Will I have to return to stock recovery using 1.58.502.1 RUU and to get the OTA update to 4.4.4??
I'm trying to get the latest Android Revolution ROM for 4.4.4 but realized I was in a bit of a pickle. I'd like to take the path of least resistance on this one - any advice would be super appreciated. Thanks!
Click to expand...
Click to collapse
I'd say wait till tomorrow to see if an OTA update will roll out.
Or if you just can't wait for the ability to flash what you desire than I would go S-OFF and flash a non At&t firmware that you need to allow a smooth function of mentioned ROM.
Im restoring back to default AT&T ROM and such and will post weather the update has been pushed or not. i sure hope it has
**Update** Still no update, i got the " Current Software is up to date, You may check again in 23 Hours 59 Mintues.
darkninja908 said:
Im restoring back to default AT&T ROM and such and will post weather the update has been pushed or not. i sure hope it has
**Update** Still no update, i got the " Current Software is up to date, You may check again in 23 Hours 59 Mintues.
Click to expand...
Click to collapse
You can check as many times as you like by setting your time manually ahead and your phone/device won't know the difference.
Check as many times as you like but it will remain the same,you should get a notification when it's time
So if you don't have s-off you can't update to 4.44 Sense ROMS with AT&T? I'm on Slim Rom and sound quality stinks. I want the new Android Revolution but i've read wi-fi and such doesn't work. Clarification plz?
war eagle said:
So if you don't have s-off you can't update to 4.44 Sense ROMS with AT&T? I'm on Slim Rom and sound quality stinks. I want the new Android Revolution but i've read wi-fi and such doesn't work. Clarification plz?
Click to expand...
Click to collapse
Correct .
S-OFF allows you to change your CID witch will allow you to ruu Dev Edition 4.4.4 so everything runs smoothly
I've not looked on this thread in a while. I am S-off and unlocked and my cid is 11111111 but I have never updated firmware so that I can run a 4.4.4 rom. Is it correct that I flash a RUU (guess it's not called flashing when it comes to a RUU). How do I know which RUU to post - I found this one here: http://forum.xda-developers.com/showthread.php?t=2757462 (http://dl3.htc.com/application/RUU_...G_20.31A.4145.02L_release_368350_signed_2.exe)
Will I loose root or anything (other than wiping my data) when running the ruu.
jball said:
Correct .
S-OFF allows you to change your CID witch will allow you to ruu Dev Edition 4.4.4 so everything runs smoothly
Click to expand...
Click to collapse
karatche said:
I've not looked on this thread in a while. I am S-off and unlocked and my cid is 11111111 but I have never updated firmware so that I can run a 4.4.4 rom. Is it correct that I flash a RUU (guess it's not called flashing when it comes to a RUU). How do I know which RUU to post - I found this one here: http://forum.xda-developers.com/showthread.php?t=2757462 (http://dl3.htc.com/application/RUU_...G_20.31A.4145.02L_release_368350_signed_2.exe)
Will I loose root or anything (other than wiping my data) when running the ruu.
Click to expand...
Click to collapse
I'll just say that if it's a stock ruu than it's most likely without root and it will wipe as if it came out of the box.if its a full ruu than it will come with the updated firmware as well witch should allow you to flash 4.4.4 Roms and still run smoothly.
What I did around 5:00am this morning was restore my Dev edition backup I had along with the stock recovery so I could take the Dev edition lollipop official update and now I have lollipop firmware to use with my stock GPE 5.0.1 lollipop ROM/backup .
Sweetness
karatche said:
I've not looked on this thread in a while. I am S-off and unlocked and my cid is 11111111 but I have never updated firmware so that I can run a 4.4.4 rom. Is it correct that I flash a RUU (guess it's not called flashing when it comes to a RUU). How do I know which RUU to post - I found this one here: http://forum.xda-developers.com/showthread.php?t=2757462 (http://dl3.htc.com/application/RUU_...G_20.31A.4145.02L_release_368350_signed_2.exe)
Will I loose root or anything (other than wiping my data) when running the ruu.
Click to expand...
Click to collapse
Yes, running/flashing the 4.4.4 Dev Edition RUU will update you to that appropriate firmware. But, what you linked is not Dev Edition, its a stock AT&T RUU. And its not 4.4.4 either, its 4.4.2, which is probably where you already are.
What you want is the 3.28.1540 RUU linked here: http://forum.xda-developers.com/htc-one-m8/development/ruu-m8-developer-edition-sense-1-54-t2884777
RUU will wipe the phone, install stock ROM (meaning root will be lost) and stock recovery.
But I also think its overkill to run an RUU just to update firmware, if that is the intent. My suggestion is to just run the firmware linked in the following post (which also has great instructions for doing so): http://forum.xda-developers.com/att-htc-one-m8/development/att-4-4-3-2-22-1540-3-debloated-sense-6-t2837365
The above method shouldn't overwrite the current ROM and user data. But backup anything important before flashing firmware, just in case.
Side note, "flash" is a fairly generic term, and as the RUU flashes stock ROM among other things, the term "flash" is appropriate IMO.
So can I just load the firmware file and flash thru fastboot? Is it This one?
3.28.1540.5 Firmware only unmodified (Latest 4.4.4 Update,S-OFF REQUIRED)
http://goo.gl/tyhRRZ
redpoint73 said:
Yes, running/flashing the 4.4.4 Dev Edition RUU will update you to that appropriate firmware. But, what you linked is not Dev Edition, its a stock AT&T RUU. And its not 4.4.4 either, its 4.4.2, which is probably where you already are.
What you want is the 3.28.1540 RUU linked here: http://forum.xda-developers.com/htc-one-m8/development/ruu-m8-developer-edition-sense-1-54-t2884777
RUU will wipe the phone, install stock ROM (meaning root will be lost) and stock recovery.
But I also think its overkill to run an RUU just to update firmware, if that is the intent. My suggestion is to just run the firmware linked in the following post (which also has great instructions for doing so): http://forum.xda-developers.com/att-htc-one-m8/development/att-4-4-3-2-22-1540-3-debloated-sense-6-t2837365
The above method shouldn't overwrite the current ROM and user data. But backup anything important before flashing firmware, just in case.
Side note, "flash" is a fairly generic term, and as the RUU flashes stock ROM among other things, the term "flash" is appropriate IMO.
Click to expand...
Click to collapse
i wanna get an s-off with sunshine and install arhd rom after but my firmware isnt up to date so i was told to get a stock rom and update there.
Any suggestions on where i start and how to do it please?
Thanks
dimakiller3 said:
i wanna get an s-off with sunshine and install arhd rom after but my firmware isnt up to date so i was told to get a stock rom and update there.
Any suggestions on where i start and how to do it please?
Thanks
Click to expand...
Click to collapse
I can't make sense of your post so I can't help you. Maybe you could reword what your trying to do because firmware has nothing to do with a stock ROM.
basically i installed a new custom rom ARHD and my wifi doesnt work there. After searching on the web apparently it's a firmware problem. I was told that if i install a stock rom and update the firmware there and reinstall the ARHD again my wifi will work.
dimakiller3 said:
basically i installed a new custom rom ARHD and my wifi doesnt work there. After searching on the web apparently it's a firmware problem. I was told that if i install a stock rom and update the firmware there and reinstall the ARHD again my wifi will work.
Click to expand...
Click to collapse
OK so you need the latest firmware are you S-Off? If so You need to download your device latest firmware an fastboot it. I would try that before I reflashed ROM..if you still don't have WiFi then I would a restore a stock backup you should have made or go to the development section an find an flash a stock rom
dimakiller3 said:
basically i installed a new custom rom ARHD and my wifi doesnt work there. After searching on the web apparently it's a firmware problem. I was told that if i install a stock rom and update the firmware there and reinstall the ARHD again my wifi will work.
Click to expand...
Click to collapse
No, for the AT&T version that actually will not work. OTA will only update you to 4.4.4, and current ARHD is 5.0 (assume current Lollipop based ARHD is what you want).
Further, if you update to 4.4.4 OTA, this will break sunshine, and you won't be able to get s-off. So you will be essentially stuck on 4.4.4 firmware until AT&T releases Lollipop.
If you want to run Lollipop now (and any current ROM based on it, like ARHD) my advice is to s-off now. Then update to LP firmware manually.
redpoint73 said:
No, for the AT&T version that actually will not work. OTA will only update you to 4.4.4, and current ARHD is 5.0 (assume current Lollipop based ARHD is what you want).
Further, if you update to 4.4.4 OTA, this will break sunshine, and you won't be able to get s-off. So you will be essentially stuck on 4.4.4 firmware until AT&T releases Lollipop.
If you want to run Lollipop now (and any current ROM based on it, like ARHD) my advice is to s-off now. Then update to LP firmware manually.
Click to expand...
Click to collapse
I have 4.4.4 and don't know the firmware number (because of the known bug in a previous version of TWRP).
You've probably described why I can't get S-Off with Sunshine to flash the latest AT&T rom so I can know my firmware number.
I need to know it so I can flash stock backup & recovery and then viper.
Any recommendations? My thanks in advance!
Wombat Pete said:
I have 4.4.4 and don't know the firmware number (because of the known bug in a previous version of TWRP).
Click to expand...
Click to collapse
Look at your hboot number in bootloader.
3.16 = 1.x software (Android 4.4.2)
3.17 = 2.x (4.4.3)
3.19 = 3.x (4.4.4)
Lollipop (Android 5.0) also uses hboot 3.19. But as already mentioned, AT&T hasn't released an offiicial LP update yet. So this can't be the case for you.
Wombat Pete said:
You've probably described why I can't get S-Off with Sunshine to flash the latest AT&T rom so I can know my firmware number.
Click to expand...
Click to collapse
If you are hboot 3.19, sunshine won't work. Any earlier hboot, and it should work. If you updated to 4.4.4 by official means (OTA or RUU) then you have hboot 3.19, and sunshine won't work.
Wombat Pete said:
I need to know it so I can flash stock backup & recovery and then viper.
Click to expand...
Click to collapse
I don't understand what you hope to accomplish by flashing stock back and recovery. Neither will affect your firmware.
If you want to run any Lollipop based ROM (including current Viper) you need to update firmware, and on the AT&T device that means you need s-off. At least until AT&T releases LP officially.
So no, what you suggested won't work.
redpoint73 said:
I don't understand what you hope to accomplish by flashing stock back and recovery. Neither will affect your firmware.
If you want to run any Lollipop based ROM (including current Viper) you need to update firmware, and on the AT&T device that means you need s-off. At least until AT&T releases LP officially.
So no, what you suggested won't work.
Click to expand...
Click to collapse
What I'm trying to do is simply what is described on this page: http://venomroms.com/viperonem8_3-0-0-requirements/
Am I misunderstanding it? I also felt there's something odd there - or, at least, I don't understand WHY flashing the stock back-up and recovery would be necessary to flash Viper. But isn't that what it says?
I would LOVE to understand the process - what's described in that process - better!
Any guidance will be greatly appreciated.
Wombat Pete said:
What I'm trying to do is simply what is described on this page: http://venomroms.com/viperonem8_3-0-0-requirements/
Am I misunderstanding it? I also felt there's something odd there - or, at least, I don't understand WHY flashing the stock back-up and recovery would be necessary to flash Viper. But isn't that what it says?
Click to expand...
Click to collapse
You're missing a key step(s): its restore stock ROM and stock recovery for the purpose of then updating via OTA. Reason for this, is that the OTA will update your firmware (for most carriers, that means updating firmware to Lollipop).
This won't work for you (having the AT&T version), since you appear to already be on the most current AT&T OTA (4.4.4). That means you are on KitKat firmware, but need Lollipop firmware to run any LP based Sense ROMs.
Also note that the page you linked is outdated, as it refers to 4.4.4, since that was what ViperOne was based on at the time (but its been updated to LP for a while now).
I have just read that sunshine has been updated to work on 4.4.4. I think this has literally happened just on the last day or so. So your options are to sunshine s-off and update your firmware. Or else wait for AT&T to release LP, and update by official OTA or RUU.
redpoint73 said:
You're missing a key step(s): its restore stock ROM and stock recovery for the purpose of then updating via OTA. Reason for this, is that the OTA will update your firmware (for most carriers, that means updating firmware to Lollipop).
This won't work for you (having the AT&T version), since you appear to already be on the most current AT&T OTA (4.4.4). That means you are on KitKat firmware, but need Lollipop firmware to run any LP based Sense ROMs.
Also note that the page you linked is outdated, as it refers to 4.4.4, since that was what ViperOne was based on at the time (but its been updated to LP for a while now).
I have just read that sunshine has been updated to work on 4.4.4. I think this has literally happened just on the last day or so. So your options are to sunshine s-off and update your firmware. Or else wait for AT&T to release LP, and update by official OTA or RUU.
Click to expand...
Click to collapse
Redpoint, thanks! As posted on the other site, the new Sunshine option worked perfectly - I now have S-Off. Very, very cool.
So I'm on to your option one - update firmware so I can get viper on the device. Is there a recommended firmware update? How would I find this myself the next time?
Wombat Pete said:
So I'm on to your option one - update firmware so I can get viper on the device. Is there a recommended firmware update? How would I find this myself the next time?
Click to expand...
Click to collapse
The "right" firmware is a tricky question. I'd start with the 4.16.1540 firmware posted along with the ROM here: http://forum.xda-developers.com/att-htc-one-m8/development/att-4-4-3-2-22-1540-3-debloated-sense-6-t2837365
This is US Dev Edition firmware, which is specifically intended for AT&T's network.
Now whether it plays well with Viper or ARHD, is another question. Or whether those ROMs play well on AT&T's network is also another complicated question. AT&T does some annoyingly unique things to their network, that doesn't always play well with the "international" based ROMs. In particular, AT&T's LTE seems to be playing havoc on some "international" ROMs; possibly due to AT&T beginning implementation of HD Voice (Voice over LTE or VoLTE).
Trial and error is the best you can do. Start with the 1540 firmware I suggested, and your desired ROM, and see how it goes. But WiFi will be fixed, I can tell you that.
Also, the ROM included on the link I provided is intended specifically for use on AT&T (one of the few current ROMs that is). So if you want a LP ROM that will work seamlessly on AT&T's network, flash WNC's ROM and the 1540 firmware.
redpoint73 said:
The "right" firmware is a tricky question. I'd start with the 4.16.1540 firmware posted along with the ROM here: http://forum.xda-developers.com/att-htc-one-m8/development/att-4-4-3-2-22-1540-3-debloated-sense-6-t2837365
This is US Dev Edition firmware, which is specifically intended for AT&T's network.
Now whether it plays well with Viper or ARHD, is another question. Or whether those ROMs play well on AT&T's network is also another complicated question. AT&T does some annoyingly unique things to their network, that doesn't always play well with the "international" based ROMs. In particular, AT&T's LTE seems to be playing havoc on some "international" ROMs; possibly due to AT&T beginning implementation of HD Voice (Voice over LTE or VoLTE).
Trial and error is the best you can do. Start with the 1540 firmware I suggested, and your desired ROM, and see how it goes. But WiFi will be fixed, I can tell you that.
Also, the ROM included on the link I provided is intended specifically for use on AT&T (one of the few current ROMs that is). So if you want a LP ROM that will work seamlessly on AT&T's network, flash WNC's ROM and the 1540 firmware.
Click to expand...
Click to collapse
Perfect, that's all helpful and good to know.
For full disclosure: I'm on T-Mobile; it's the same network, I believe, so that probably doesn't change anything, but I mention it just in case.
So the process I'm planning to do it:
1.) Flash the ATT_4_16_1540_8_M8_Lollipop_Firmware and ROM
http://goo.gl/iumj9r
2.) Flash the latest Viper ROM.
3.) If it gives me trouble, flash firmware & from 1., above, to go back to that.
Does that sound right?
Also, do people restore s-on when they have their desired setup, or just leave the phone S-off?
Wombat Pete said:
For full disclosure: I'm on T-Mobile; it's the same network, I believe, so that probably doesn't change anything, but I mention it just in case.
Click to expand...
Click to collapse
T-Mobile and AT&T are not even remotely the same network. I know for a fact, the 1540 firmware I previously suggested (thinking you were on AT&T) does not include the AWS band that T-Mobile most commonly uses for 3G. And T-Mobile uses some different bands for LTE than AT&T.
T-Mobile has deployed 1900 MHz 3G band in select markets, in hopes of luring AT&T users (without having to swap devices). But only in certain cities.
Its best you flash T-Mobile firmware, for use on T-Mobile's network.
Wombat Pete said:
Also, do people restore s-on when they have their desired setup, or just leave the phone S-off?
Click to expand...
Click to collapse
Typically, no. In fact, if you ever want to s-off again, I believe you have to pay the $25 for sunshine again.
For the most part, there is no real downside to staying s-off, in my opinion. Just be careful that you only flash anything meant specifically for the M8 (and the GSM version, at that, nothing for the CDMA). As s-off means many checks are bypassed, and you can accidentally flash something meant for another device that bricks the phone, if you are careless. But always be careful about what you flash, and staying s-off is fine.
redpoint73 said:
T-Mobile and AT&T are not even remotely the same network. I know for a fact, the 1540 firmware I previously suggested (thinking you were on AT&T) does not include the AWS band that T-Mobile most commonly uses for 3G. And T-Mobile uses some different bands for LTE than AT&T.
T-Mobile has deployed 1900 MHz 3G band in select markets, in hopes of luring AT&T users (without having to swap devices). But only in certain cities.
Its best you flash T-Mobile firmware, for use on T-Mobile's network.
Typically, no. In fact, if you ever want to s-off again, I believe you have to pay the $25 for sunshine again.
For the most part, there is no real downside to staying s-off, in my opinion. Just be careful that you only flash anything meant specifically for the M8 (and the GSM version, at that, nothing for the CDMA). As s-off means many checks are bypassed, and you can accidentally flash something meant for another device that bricks the phone, if you are careless. But always be careful about what you flash, and staying s-off is fine.
Click to expand...
Click to collapse
Understood. Is there a similar link to recommended firmware for T-Mobile?
And then the main thing - is the process I suggest right? 1.) Flash new LP firmware; 2.) Flash the latest viper ROM; 3.) If I have trouble with viper that I can't solve, flash a ROM made for T-Mobile. Does that sound right? If so, i just need to determine the best firmware choice... and what are criteria might I use for that?
Wombat Pete said:
Understood. Is there a similar link to recommended firmware for T-Mobile?
Click to expand...
Click to collapse
I can't actually find the Lollipop T-Mobile US firmware at first glance. The firmware collection is below (with instructions how to flash). But if you go to the firmware collection link (531 folder under HTC M8 is for T-Mobile) it only has 3.x firmware (Android 4.4.4):
http://forum.xda-developers.com/showthread.php?t=2696282
I'll look some more, but you can search as well.
Now, if I understand you have the AT&T version (please confirm)? If so, flashing T-Mobile firmware (once we find it) is a little more complicated than flashing AT&T firmware on an AT&T device. You will need to change your CID and MID to T-Mobile's, in order to flash the T-Mobile firmware.
The following guide shows how to change the CID and MID. But you will need to find the T-Mobile US CID. I don't know if off hand (or where to find it quickly), so you might do your own research on that one. Keeping in mind that T-Mobile is also a carrier in Europe, so make sure is the T-Mobile US CID.
http://forum.xda-developers.com/htc-one-m8/general/change-wwe-m8-to-dev-edition-ota-t2826567
Wombat Pete said:
And then the main thing - is the process I suggest right? 1.) Flash new LP firmware; 2.) Flash the latest viper ROM; 3.) If I have trouble with viper that I can't solve, flash a ROM made for T-Mobile. Does that sound right? If so, i just need to determine the best firmware choice... and what are criteria might I use for that?
Click to expand...
Click to collapse
I don't think T-Mobile is nearly as troublesome as AT&T (although you might check the T-Mobile M8 forum section on that, or the Viper thread). I have a feeling that once you are on the T-Mobile firmware, and flash Viper, you will be fine.
redpoint73 said:
I can't actually find the Lollipop T-Mobile US firmware at first glance. The firmware collection is below (with instructions how to flash). But if you go to the firmware collection link (531 folder under HTC M8 is for T-Mobile) it only has 3.x firmware (Android 4.4.4):
http://forum.xda-developers.com/showthread.php?t=2696282
I'll look some more, but you can search as well.
Now, if I understand you have the AT&T version (please confirm)? If so, flashing T-Mobile firmware (once we find it) is a little more complicated than flashing AT&T firmware on an AT&T device. You will need to change your CID and MID to T-Mobile's, in order to flash the T-Mobile firmware.
The following guide shows how to change the CID and MID. But you will need to find the T-Mobile US CID. I don't know if off hand (or where to find it quickly), so you might do your own research on that one. Keeping in mind that T-Mobile is also a carrier in Europe, so make sure is the T-Mobile US CID.
http://forum.xda-developers.com/htc-one-m8/general/change-wwe-m8-to-dev-edition-ota-t2826567
I don't think T-Mobile is nearly as troublesome as AT&T (although you might check the T-Mobile M8 forum section on that, or the Viper thread). I have a feeling that once you are on the T-Mobile firmware, and flash Viper, you will be fine.
Click to expand...
Click to collapse
Confirming: I am using T-Mobile as the carrier, but the device was made for AT&T.
Is this what we're looking for? http://www.htc.com/us/support/htc-one-m8-t-mobile/news/
And, if so... as I'm S-off, I don't need to go through the stock ROM/stock recovery steps, and there's also no need to re-lock, RIGHT? I'd like to be as sure as possible that I'm doing the right steps in the right order.
Wombat Pete said:
Is this what we're looking for? http://www.htc.com/us/support/htc-one-m8-t-mobile/news/
And, if so... as I'm S-off, I don't need to go through the stock ROM/stock recovery steps, and there's also no need to re-lock, RIGHT? I'd like to be as sure as possible that I'm doing the right steps in the right order.
Click to expand...
Click to collapse
You are correct. RUU will give you a complete stock T-Mobile image, not just the firmware you want, but also stock T-Mobile Lollipop ROM, stock recovery, etc. Its a bit of a nuclear option, if the main intent is to just update firmware and install Viper. But it will get the job done.
Also correct that there is no need to relock bootloader to RUU, since you are s-off. But you need to change to T-Mobile CID and MID to run the RUU.
What you will have after changing CID/MID and running the T-Mobile RUU is essentially a T-Mobile M8, in everything except the stupid AT&T logo on back of the phone!
If you want to install a custom ROM after that, just flash TWRP back onto the phone, and flash the desired ROM.
redpoint73 said:
You are correct. RUU will give you a complete stock T-Mobile image, not just the firmware you want, but also stock T-Mobile Lollipop ROM, stock recovery, etc. Its a bit of a nuclear option, if the main intent is to just update firmware and install Viper. But it will get the job done.
Also correct that there is no need to relock bootloader to RUU, since you are s-off. But you need to change to T-Mobile CID and MID to run the RUU.
What you will have after changing CID/MID and running the T-Mobile RUU is essentially a T-Mobile M8, in everything except the stupid AT&T logo on back of the phone!
If you want to install a custom ROM after that, just flash TWRP back onto the phone, and flash the desired ROM.
Click to expand...
Click to collapse
OK... so I think this makes sense. Is this the process, then?
1.) I change to T-Mobile CID and MID
2.) Then... to run the RUU, do I need to be in fastboot? Just have the phone plugged in? Run it from the fastboot directory? Put it in the phone memory?
I'd be running THIS, I gather: RUU_M8_[email protected]41216A_40.34.C35006.02_F_release_407726_signed_2.exe
Wait... that can't be right, given that the name includes "ATT" and "Cingular". I suppose they mean I have to find it myself... here? http://www.htc.com/us/support/htc-one-t-mobile/news/ Yes, the download at the end of this page, right? And it won't brick the phone so long as I'm S-off...
...does that seem right?
3.) Then I flash VIPER over that. If I have any problems with VIPER, I should be able to run this RUU again? Is that the best approach, do you think?
---------- Post added at 12:36 AM ---------- Previous post was at 12:24 AM ----------
Two additional things:
First, HTC (not surprisingly) refuses to say whether the RUU will work, even with S-off.
Second, a note from the chat, which I post for common interest here:
ME: T-Mobile and AT&T are the same, physically, right? Only SOFTWARE differences, right? Not hardware differences, right?
HTC Agent: Almost everything is the same. But the frequencies of the antenna are different.Don't know whether this affects our process here, but thought it might be interesting.
Also, after the RUU I'd be S-Off, but locked? Unlock again? Not that that should be difficult...
Wombat Pete said:
OK... so I think this makes sense. Is this the process, then?
1.) I change to T-Mobile CID and MID
2.) Then... to run the RUU, do I need to be in fastboot? Just have the phone plugged in? Run it from the fastboot directory? Put it in the phone memory?
I'd be running THIS, I gather: RUU_M8_[email protected]41216A_40.34.C35006.02_F_release_407726_signed_2.exe
Wait... that can't be right, given that the name includes "ATT" and "Cingular". I suppose they mean I have to find it myself... here? http://www.htc.com/us/support/htc-one-t-mobile/news/ Yes, the download at the end of this page, right? And it won't brick the phone so long as I'm S-off...
...does that seem right?
3.) Then I flash VIPER over that. If I have any problems with VIPER, I should be able to run this RUU again? Is that the best approach, do you think?
Click to expand...
Click to collapse
1) Correct
2) Normally, you just have the phone booted; and the RUU will reboot the phone to fastboot automatically. There are a few instances where some folk have to put the phone into fastboot mode manually. But it will normally work the way the instructions tell you.
Run the RUU executable from your PC. It doesn't matter where the file is located.
Use the RUU linked at the bottom of the HTC support page for the T-Mobile version.
3) After RUU, you will need to flash TWRP again; as RUU write stock recovery over whatever was there before (TWRP in your case). After flashing TWRP, then you can flash Viper.
Yes, if Viper give you trouble you can always use the RUU again.
Wombat Pete said:
Two additional things:
First, HTC (not surprisingly) refuses to say whether the RUU will work, even with S-off.
Click to expand...
Click to collapse
They won't say that the T-Mobile RUU will run on the AT&T version, if that is what you asked them. HTC doesn't want you "converting" the device from one carrier version to another; since it contrary to what the carriers want.
Similarly, they won't want to acknowledge s-off since they don't like the mod community hacking/exploiting s-off in the first place.
Wombat Pete said:
Second, a note from the chat, which I post for common interest here:
ME: T-Mobile and AT&T are the same, physically, right? Only SOFTWARE differences, right? Not hardware differences, right?
HTC Agent: Almost everything is the same. But the frequencies of the antenna are different.Don't know whether this affects our process here, but thought it might be interesting.
Click to expand...
Click to collapse
I think that agent is simply wrong here. Snapdragon 801, band support is software based, for all but CDMA bands (which require different hardware).
If you search the forums, I'm pretty certain there are other users on these forums that have done exactly what you are proposing: converting the AT&T version to T-Mobile. I may have even helped one or 2 users do it.
how do i root the htc one m8 I am familiar with rooting as i had a s4 rooted with gpe but i am confused with the htc one m8 plz help
xCellHD said:
how do i root the htc one m8 I am familiar with rooting as i had a s4 rooted with gpe but i am confused with the htc one m8 plz help
Click to expand...
Click to collapse
How to root (with links) is explained on my thread here: http://forum.xda-developers.com/showthread.php?t=2751432
Also, much of the "HTC specific" lingo is explained here: http://forum.xda-developers.com/showthread.php?p=52484527
I would suggest reading up (and making sure you understand all the terms and processes) for at least a couple hours before trying anything on the phone. I do this every time I buy a new device, even having own quite a few HTC phones. In fact, I usually start reading and researching before I have the phone in hand.
.
also is there a way were i can go back to stock when i need to thanks
xCellHD said:
also is there a way were i can go back to stock when i need to thanks
Click to expand...
Click to collapse
If your talking about ROM, then take a full backup of your ROM before flashing custom ROM using titanium/nandroid etc.
Or if your talking about root,
Just unroot using unroot apps from play store or the respected app you get after rooting.
xCellHD said:
also is there a way were i can go back to stock when i need to thanks
Click to expand...
Click to collapse
As the above reply stated, it depends on what you are talking about.
If you just want the stock ROM, recovery, etc. one option is to relock the bootloader and just run the RUU. It will return you to stock software. The only thing not "stock" will be the bootloader will say RELOCKED instead of LOCKED. You need s-off to make it say LOCKED again (after unlocking it).
?
so this is what i want to do i want to unlock bootloader then root which i know how to do but i was woundering would i be able to install this rom http://forum.xda-developers.com/att-htc-one-m8/development/rom-sd-4-0-sense7-port-sdkernel-t3062367
would i be able to install that rom soon as i am done unlocking the bootloader and rooting or would i have extra stuff sorry for the dumb questions
xCellHD said:
so this is what i want to do i want to unlock bootloader then root which i know how to do but i was woundering would i be able to install this rom http://forum.xda-developers.com/att-htc-one-m8/development/rom-sd-4-0-sense7-port-sdkernel-t3062367
would i be able to install that rom soon as i am done unlocking the bootloader and rooting or would i have extra stuff sorry for the dumb questions
Click to expand...
Click to collapse
What are your current hboot and radio numbers?
redpoint73 said:
What are your current hboot and radio numbers?
Click to expand...
Click to collapse
my hboot is 3.19 and my radio is [email protected]
xCellHD said:
my hboot is 3.19 and my radio is [email protected]
Click to expand...
Click to collapse
You should be good to go, then. Just unlock the bootloader, install custom recovery and flash the Skydragon ROM you linked.
would i need to be s-off and would i be able to go back stock and relock the bootloader with s-on again sorry for the manny questions i am new to this phone
xCellHD said:
would i need to be s-off and would i be able to go back stock and relock the bootloader with s-on again sorry for the manny questions i am new to this phone
Click to expand...
Click to collapse
You can return to stock with a RELOCKED bootloader with s-on.
You do need s-off if you want to make the bootloader say LOCKED as it was from the factory. But the only reason to ever do this is for warranty purposes. And if you bought the phone from AT&T, you should note that your warranty is through AT&T, not HTC. And AT&T doesn't give a crap if the bootloader is unlocked, or whatever (folks have even successfully sent in phones for warranty with custom ROMs on them).
If you are seeing warranty service through HTC (you didn't purchase from AT&T) that is another story. But that is the only reason I'd bother going back to LOCKED.
In normal usage, I recommend leaving the bootloader UNLOCKED as it give you more flexibility to flash ROMs whenever you want, etc. The only reason IMO to relock the bootloader in normal usage is to run the RUU.
S-off is nice have if you want to flash radios, modified hboots, and some other things (you also don't need to relock to RUU with s-off). It certainly doesn't hurt, and some folks like to make the phone as customizable as possible right away. In fact, I did s-off to the phone the second day I had it (although s-off was free back then). But for you, its not strictly "needed" at this time unless you want to do the things mentioned.
so heres the thing again sorry for the manny questions i am just making sure if i do this everything will work so heres the thing the rom i linked if i were to flash it will my at&t sevice work since it would be a different baseband
can you link me the latest twrp recovery for the at&t htc m8 so i can flash once i unlock the boatloader
xCellHD said:
can you link me the latest twrp recovery for the at&t htc m8 so i can flash once i unlock the boatloader
Click to expand...
Click to collapse
https://twrp.me/devices/htconem8gsm.html
the latest twrp 2.8.6.0 should work with my at&t m8 ?
xCellHD said:
so heres the thing again sorry for the manny questions i am just making sure if i do this everything will work so heres the thing the rom i linked if i were to flash it will my at&t sevice work since it would be a different baseband
Click to expand...
Click to collapse
The baseband isn't determined by the ROM, its determined by flashing a different baseband/radio (which requires s-off).
There are some folks that have had issues on AT&T's LTE network using some custom ROMs. Namely, not receiving or sending voice calls while on LTE. But this seems somewhat random, and not the ROMs fault per se; but probably changes that AT&T is making to their network. The most you can do is flash the Skydragon ROM, and if you have problems, try another ROM or revert to stock.
Make a backup of your stock ROM with TWRP before you flash anything, to be sure you have something to revert to if you have problems. This is good general advice before you flash any custom ROMs, root mods, etc.
I'm using the ROM your linked (Skydragon Sense 7) on AT&T, and it works fine for me.