Related
Hi there,
I have a I9100 which was running the samsung stock Android 4.0.4 on the 3 network in the UK which I installed CWrecovery on and rooted. I downloaded an official update via the system update function yesterday and continued installing the update not thinking the root would effect anything, however the the install got stuck on the install screen (like the image attached) while constantly flashing on and off every 3-4 seconds, I pulled the battery after and hour or so. When I power on now it just shows the samsung sII logo along with the triangle and then goes straight back to the android install screen, I also can't go into recovery.
What would be the best thing to do in this instance? would re-flashing a recovery program work?
Thanks for any help!
Whatever happens, DO NOT WIPE DATA OR DO A FACTORY RESET! 4.0.4 is prone to the notorious eMMC brickbug!
Try downloading the new firmware manually and flashing via Odin.
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
Whatever happens, DO NOT WIPE DATA OR DO A FACTORY RESET! 4.0.4 is prone to the notorious eMMC brickbug!
Try downloading the new firmware manually and flashing via Odin.
Thanks for the reply, Is there somewhere I can download the 100% offical I9100 jellybean firmware?
Click to expand...
Click to collapse
Yup.. sammobile.com..
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
Yup.. sammobile.com..
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
Thanks for that, the sammobile.com MD5 flashed, and all seems good.
Is there a method for rooting stock jellybean on the I9100? can I use the same tar file and method as I did with ICS?
Had the exact same problem today. Solved it with this thread!
Neil27 said:
Is there a method for rooting stock jellybean on the I9100? can I use the same tar file and method as I did with ICS?
Click to expand...
Click to collapse
U mean using CF Root kernel to root?
For JB, u can root using a custom kernel like Siyah, using Odin. This will install CWM recovery also and give u root access.
Or u can try the Universal Method to root without installing CWM recovery.
"To err is human, to forgive is divine"
Sent from my SGS II
---------- Post added at 06:14 AM ---------- Previous post was at 06:13 AM ----------
And please add [SOLVED] to the title of ur post.
"To err is human, to forgive is divine"
Sent from my SGS II
Pan_Man said:
Had the exact same problem today. Solved it with this thread!
Click to expand...
Click to collapse
Thats good to know
U mean using CF Root kernel to root?
For JB, u can root using a custom kernel like Siyah, using Odin. This will install CWM recovery also and give u root access.
Click to expand...
Click to collapse
I used CF root and odin last time, any advantage to using Siyah, or Universal Method?
Neil27 said:
Thats good to know
I used CF root and odin last time, any advantage to using Siyah, or Universal Method?
Click to expand...
Click to collapse
Universal method is intended for those who only want rooted stock firmware, but donot want to flash custom ROMs (no CWM recovery).
Some people have reported issues with CF Root for JB, so Siyah is an alternative. I don't think there are any particular advantages.
"To err is human, to forgive is divine"
Sent from my SGS II
- SOLVED - (Thanks to immortalneo )
Hello, noob here D:
Here's the story.. I recently got a Galaxy S2 i9100. It's updated to the 4.1.2 thingy.
Tried to root it, used odin and CF-ROOT v5.5 in the process. Odin said it was OK but I got stuck on the yellow triangle.
Found a guide, guide said to install Stock Rom.. so I did. (Stock rom is I9100XWLPU_I9100XXLQ6_I9100XEZLP3_HOME.tar )
Now there's no yellow triangle but it's stuck on the flashy S screen.
I never had a smartphone, and I don't understand most of the words people use here (mainly that 'flash it' thing xD )
I tried to look for a post or anything to solve this but kinda failed..
Help?
What you have is called a 'bootloop' mate.. it can be sorted out.
Which android version do u have now? Its 4.0.4 right? 4.0.4 is subject to risk of eMMC Brickbug.
So, I suggest you download another stock firmware (other than 4.0.4) and flash it via Odin.
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
What you have is called a 'bootloop' mate.. it can be sorted out.
Which android version do u have now? Its 4.0.4 right? 4.0.4 is subject to risk of eMMC Brickbug.
So, I suggest you download another stock firmware (other than 4.0.4) and flash it via Odin.
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
Thanks for the reply :good:
about the version.. I'm pretty sure I mentioned it was 4.1.2 xD
So all I have to do is download a stock firmware that's for my version and flash it?
DaN00b said:
Thanks for the reply :good:
about the version.. I'm pretty sure I mentioned it was 4.1.2 xD
So all I have to do is download a stock firmware that's for my version and flash it?
Click to expand...
Click to collapse
U mentioned 4.1.2. You also mentioned flashing stock firmware XWLPU, which is 4.0.4.
Yes, simply download a 4.1.2 firmware for ur region from sammobile.com and flash via Odin.
If it still bootloops, boot to recovery and do a factory reset.
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
U mentioned 4.1.2. You also mentioned flashing stock firmware XWLPU, which is 4.0.4.
Yes, simply download a 4.1.2 firmware for ur region from sammobile.com and flash via Odin.
If it still bootloops, boot to recovery and do a factory reset.
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
Hmm okay, thanks a lot : )
Just a final question.. I got my phone from Russia but I live in a different place.. does it affect the firmware I need to download?
Nvm! I'm pretty sure I found the firmware I need. If I have any other questions, I'll ask
Thanks again : )
DaN00b said:
Hmm okay, thanks a lot : )
Just a final question.. I got my phone from Russia but I live in a different place.. does it affect the firmware I need to download?
Nvm! I'm pretty sure I found the firmware I need. If I have any other questions, I'll ask
Thanks again : )
Click to expand...
Click to collapse
Nope, it doesn't matter which region's u download.
Do let know what happens.
And please add [SOLVED] to the title of ur post if u succeed.
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
Nope, it doesn't matter which region's u download.
Do let know what happens.
And please add [SOLVED] to the title of ur post if u succeed.
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
Okay, the problem is solved
After flashing the stock rom, had to wait a little bit at the boot screen but it moved on and now everythings alright.
Thanks for the help
And ofc, added the [solved] thingy
Hi all
I just flashed my device Galaxy I9100G with the Stock Official Firmwares as this thread : http://forum.xda-developers.com/showthread.php?t=1679636
And before i flash i did factory reset from android OS not from recovery mode (Settings -> backup -> Factory reset) then i flashed the Firmwares everything good and it work great, then i try to root as they say here in first method, but after i chose apply update from external storage in recovery mode an error appear saying "E:Failed to mount /sdcard (No such file or directory)" and i don't have an external sdcard i am using internal 16 GB.
Please help me
Sorry if i post in wrong section but i am new user this is my first post and the forum didn't allow me to post in developer section
Sorry for my bad english too
Isn't that method for ICS instead of JB? You can look for a guide that tells you the steps with Odin (in other words: flash a custom kernel with Odin to give you root access).
Sent from my Dragonball GT-I9100
Donnie Sins said:
Isn't that method for ICS instead of JB? You can look for a guide that tells you the steps with Odin (in other words: flash a custom kernel with Odin to give you root access).
Sent from my Dragonball GT-I9100
Click to expand...
Click to collapse
There is no custom kernel for stock official yet and as i know the root operation the same for all OS and devices right ?
Alaal said:
There is no custom kernel for stock official yet and as i know the root operation the same for all OS and devices right ?
Click to expand...
Click to collapse
Of course there is. Otherwise nobody could use rooted JB-roms. Look for Siyah for example.
Yes, as far as I know the steps are the same.
Sent from my Dragonball GT-I9100
Donnie Sins said:
Isn't that method for ICS instead of JB?
Click to expand...
Click to collapse
It does work for JB, but unfortunately u require an external SD card for that.
@OP:
However, I recommend you flash Siyah v6 b5 kernel via Odin.
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
It does work for JB, but unfortunately u require an external SD card for that.
@OP:
However, I recommend you flash Siyah v6 b5 kernel via Odin.
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
Thank you for replay, but are you sure there is no way to do this without sd card ?
And second this Siyah Kernal is it nased on Stock Offical ? and does it work on I9100G or only on I9100 ?
Thanks
Alaal said:
Thank you for replay, but are you sure there is no way to do this without sd card ?
And second this Siyah Kernal is it nased on Stock Offical ? and does it work on I9100G or only on I9100 ?
Thanks
Click to expand...
Click to collapse
No way without an sd card.
Siyah is a custom kernel, but its good too. If you want to root with a stock based kernel, use Philz kernel.
U said u have I9100, right? Or is it I9100G?
Siyah doesn't work on I9100G.
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
No way without an sd card.
Siyah is a custom kernel, but its good too. If you want to root with a stock based kernel, use Philz kernel.
U said u have I9100, right? Or is it I9100G?
Siyah doesn't work on I9100G.
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
It's a G i forgot to say that sorry
Thank you
Alaal said:
It's a G i forgot to say that sorry
Thank you
Click to expand...
Click to collapse
That's a really big mistake mate! If you had done anything related to the I9100 on ur device, you would very well have bricked it!
Both have differences in hardware, and hence use different kernels and ROMs.
"To err is human, to forgive is divine"
Sent from my SGS II
---------- Post added at 09:14 PM ---------- Previous post was at 08:51 PM ----------
There is a separate section for ur device. Please check the stickies in that subforum.
"To err is human, to forgive is divine"
Sent from my SGS II
Hello!
I want to do a root for my GALAXY S2 I9100T device so I can install the rom SUPERNEXUS 2.0
You can request a guide or a suitable way to fit my version?
i got Android version 4.0.4
i want just to get the ROM SUPERNEXUS 2.0 so my galaxy will look like nexus i am new in this android things its a new phone
btw i have no sim card, will it works ?
Baseband version:
I9100TJILPD
Core version:
3.0.15-1087786
root @ BUILDSERVER-241 # 3
SMP PREEMPT Wed Sep 5 12:00:52 EEST 2012
Build version number:
IMM76D.JILPD
What can adjust these data after cone I can also install the ROM SUPERNEXUS 2.0
Please help I really do not understand these things this new phone I bought it last week and I want to look like NEXUS 4.2.2))
So if possible the safest and easiest way would work please tell me
Thanks.
The I9100T is almost similar to the I9100 in terms of hardware, and so u can use a rooting method meant for the I9100.
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
The I9100T is almost similar to the I9100 in terms of hardware, and so u can use a rooting method meant for the I9100.
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
oh thanks then..
mm whats the best and easy way to root ?
my plan is to install the SUPERNEXUS 2.0 ROM all i know is that i have to root the device
so whats the best to do it so the rom will work ?
and i have no sd card it will be ok ? because in rom install it say need copy files to sd card?
theres way do it without sd card ?
thanks
PSYCO1g said:
oh thanks then..
mm whats the best and easy way to root ?
my plan is to install the SUPERNEXUS 2.0 ROM all i know is that i have to root the device
so whats the best to do it so the rom will work ?
and i have no sd card it will be ok ? because in rom install it say need copy files to sd card?
theres way do it without sd card ?
thanks
Click to expand...
Click to collapse
Use Siyah kernel to root.
SD card stands for your internal SD memory, not the external SD card. Just copy it to ur phone, that's all.
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
Use Siyah kernel to root.
SD card stands for your internal SD memory, not the external SD card. Just copy it to ur phone, that's all.
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
Siyah kernel ?
are u sure ?
i searched for it but didnt knew what to do rly
is it match for 4.0.4 android ?
and will if works for the SUPERNEXUS 2.0 ROM ?
can i have a good root tutorial ?
sry im rly noob xD
PSYCO1g said:
Siyah kernel ?
are u sure ?
i searched for it but didnt knew what to do rly
is it match for 4.0.4 android ?
and will if works for the SUPERNEXUS 2.0 ROM ?
can i have a good root tutorial ?
sry im rly noob xD
Click to expand...
Click to collapse
Saying ur a noob is no excuse for not searching mate. All it takes is some good old reading and a little common sense.
Siyah kernel is actually compatible with all versions of android, including 4.0.4. But you must be careful to choose the correct version of Siyah that matches ur firmware.
It doesn't matter what kernel u have, because after flashing it will be replaced by the kernel included in the SuperNexus rom.
For a good tutorial, u can use search or check out the stickies in the Q & A section.
Feel free to ask any doubts u may have.
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
Saying ur a noob is no excuse for not searching mate. All it takes is some good old reading and a little common sense.
Siyah kernel is actually compatible with all versions of android, including 4.0.4. But you must be careful to choose the correct version of Siyah that matches ur firmware.
It doesn't matter what kernel u have, because after flashing it will be replaced by the kernel included in the SuperNexus rom.
For a good tutorial, u can use search or check out the stickies in the Q & A section.
Feel free to ask any doubts u may have.
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
thanks for the answer, not tring to excuse it just i searched but i dont know what is good so i now will search in q / a and ill tell u what i understood thanks.
PSYCO1g said:
thanks for the answer, not tring to excuse it just i searched but i dont know what is good so i now will search in q / a and ill tell u what i understood thanks.
edit:
mmm so what match for my firmwere ? is firmwere is about the supernexus one or just random ?
dont rly get it sorry again
SiyahKernel S2-v5.0.1 is this one is good ?
http://www.gokhanmoral.com/?cat=5
what do i need to do to have my device to have the SUPERNEXUS 2.0 working with a good kernel that will work good with the rom
what rom is good for it and how i install it ?
Click to expand...
Click to collapse
Replying to ur PM:
When u are going to root, u should look at the firmware u have now, and choose the correct kernel. Don't look at the rom that u are planning to flash.
Siyah v5.0.1 is the latest kernel for ICS, and hence is a good choice. You can use it to root now.
To get SuperNexus (or any other custom rom), u need a working CWM recovery to flash the rom.
Flashing Siyah kernel via odin will install this CWM recovery. You only need to follow the instructions given in the rom's thread after that to install.
There was no good rom,
there is no good rom,
and there will be no good rom..
Because it all depends on what suits u best (which only u can tell after trying).
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
Replying to ur PM:
When u are going to root, u should look at the firmware u have now, and choose the correct kernel. Don't look at the rom that u are planning to flash.
Siyah v5.0.1 is the latest kernel for ICS, and hence is a good choice. You can use it to root now.
To get SuperNexus (or any other custom rom), u need a working CWM recovery to flash the rom.
Flashing Siyah kernel via odin will install this CWM recovery. You only need to follow the instructions given in the rom's thread after that to install.
There was no good rom,
there is no good rom,
and there will be no good rom..
Because it all depends on what suits u best (which only u can tell after trying).
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
oh thank u so much finally i can understand thats rly good answer man !
thank u i will try it soon actualy now i installed a jelly bean launcher and it looks perfect so i will install rom maybe next week
so thanks for answer
PSYCO1g said:
oh thank u so much finally i can understand thats rly good answer man !
thank u i will try it soon actualy now i installed a jelly bean launcher and it looks perfect so i will install rom maybe next week
so thanks for answer
Click to expand...
Click to collapse
Ur welcome.
Don't forget to add [SOLVED] to the title of ur post after u successfully root.
"To err is human, to forgive is divine"
Sent from my SGS II
Replying to ur PM:
PSYCO1g said:
hey so i thought about it and i want to root now my sgs2 i9100t
ok so i see this tutorital:
http://galaxys2root.com/galaxy-s2-root/how-to-root-galaxy-s2-i9100-icsandroid-4-0/
so the question i want to ask is should i use the kernel files that in tutorial or use the
SiyahKernel S2-v5.0.1
http://www.gokhanmoral.com/?cat=5
that u said is very good
will they both work ? does it matter what i choose ?
and if yes what to choose and use this root tutorial or theres better ways ?
if yes so tell me if use the siyah kernel or this tutorial
thanks
Click to expand...
Click to collapse
That tutorial uses a CF kernel to root, instead of Siyah kernel. The difference is that CF is simply the stock kernel while Siyah is a custom kernel. You can use both to root.
But on 4.0.4, there is always a risk of using CF kernels due to eMMC Brickbug issue. That's why I suggested Siyah, which is 'safe'. I'm not sure if ur device has the risk of brickbug, but its always better to be safe than sorry.
If you still want to use the stock kernel to root, u can try Philz kernel (its also 'safe').
P.S. The CF kernel in the guide u posted is not the correct version u require. CF kernels and Philz kernels are stock kernels, so u have to find the one that closely matches ur stock kernel.
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
Replying to ur PM:
That tutorial uses a CF kernel to root, instead of Siyah kernel. The difference is that CF is simply the stock kernel while Siyah is a custom kernel. You can use both to root.
But on 4.0.4, there is always a risk of using CF kernels due to eMMC Brickbug issue. That's why I suggested Siyah, which is 'safe'. I'm not sure if ur device has the risk of brickbug, but its always better to be safe than sorry.
If you still want to use the stock kernel to root, u can try Philz kernel (its also 'safe').
P.S. The CF kernel in the guide u posted is not the correct version u require. CF kernels and Philz kernels are stock kernels, so u have to find the one that closely matches ur stock kernel.
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
ok so as u say the best kernel is that match my stock kernel (4.0.4 israel Cellcom) is the Siyah and i just need use the tutorial and use the siyah files and not the ones that in the tutorial ? siyah for sure ? because i googeled about siyah and i find a lot brick bugs about it
are u sure that i should use siyah for my i9100t?
PSYCO1g said:
ok so as u say the best kernel is that match my stock kernel (4.0.4 israel Cellcom) is the Siyah and i just need use the tutorial and use the siyah files and not the ones that in the tutorial ? siyah for sure ? because i googeled about siyah and i find a lot brick bugs about it
are u sure that i should use siyah for my i9100t?
Click to expand...
Click to collapse
Yup.
Put ur phone in Download mode and flash Siyah via Odin as PDA.
Simple as that.
He are a few threads I found on searching for "Siyah brickbug":
http://forum.xda-developers.com/showthread.php?t=1855732
http://forum.xda-developers.com/showthread.php?t=1935094
http://forum.xda-developers.com/showthread.php?t=1923513
What do they tell you?
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
Yup.
Put ur phone in Download mode and flash Siyah via Odin as PDA.
Simple as that.
He are a few threads I found on searching for "Siyah brickbug":
http://forum.xda-developers.com/showthread.php?t=1855732
http://forum.xda-developers.com/showthread.php?t=1935094
http://forum.xda-developers.com/showthread.php?t=1923513
What do they tell you?
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
lol u right i dont see something bad bout the siyah there, my fault then ! anyways so im gonna do it now !
and tell u the results DD
PSYCO1g said:
lol u right i dont see something bad bout the siyah there, my fault then ! anyways so im gonna do it now !
and tell u the results DD
Click to expand...
Click to collapse
Good luck mate! :thumbup:
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
Good luck mate! :thumbup:
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
Hi bro i did it ! DD
I'm rooted
now i got everytime i power on a yellow tringle and it say i9100 not i9100t xD
and i have the super SU thing
thats great so now im rooted !
so now how can i install the SuperNexus 2.0 ROM ?
should i use it or CM 10.1 and when doing it use the siyah kernel too ?
edit:
hi i downloaded the file and want to install the rom but i dont understand nothing from the instructions
can u explain me it more ? how to do it but so i can understand because i didnt understand how to do it
PSYCO1g said:
Hi bro i did it ! DD
I'm rooted
now i got everytime i power on a yellow tringle and it say i9100 not i9100t xD
and i have the super SU thing
thats great so now im rooted !
so now how can i install the SuperNexus 2.0 ROM ?
should i use it or CM 10.1 and when doing it use the siyah kernel too ?
edit:
hi i downloaded the file and want to install the rom but i dont understand nothing from the instructions
can u explain me it more ? how to do it but so i can understand because i didnt understand how to do it
Click to expand...
Click to collapse
Good job!
The yellow triangle is normal after rooting (some people even consider it a badge of honor).
U can flash the SuperNexus rom in CWM recovery.
Post the instructions that u find confusing.
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
Good job!
The yellow triangle is normal after rooting (some people even consider it a badge of honor).
U can flash the SuperNexus rom in CWM recovery.
Post the instructions that u find confusing.
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
mmm everything xD
i dont understand nothing
it say i need put the files ? where ? i dont have sd card and what folder i need put i rly dont get nothing
Instructions:
Copy Google Apps and SuperNexus ROM to your internal SD Card
Enter Recovery
Do a Wipe/Factory Reset (Necessary if coming from a different a ROM)
Flash SuperNexus ROM
Flash Google Apps
Reboot your device!
Voila!
i dont have sd card where to put it ? if u answer in my phone so where in my phone ?
how i enter to recovery and how i do wipe and factory ?
how to flash supernexus and the gapps ? with odin ?
rly dont get it
can u write me a better instructions so i can understand ?
sorry for bothering u so much but u are rly helping me
some one ?
can u please explain me how to install the SuperNexus 2.0 ROM without sd card ?
By borrowing an SD card.
Sent from the little guy
Hi,
I have the following phone:
Model number:
GT-I9100T
Android version:
4.0.3
Baseband version:
I9100TDULP4
Kernel version:
[email protected] #3
Build number:
IML74K.DULPB
I'm following some root instructions, but can't find the correct CF Root listed. Where can I get the version I need?
ExynosAbuse.
Sent from the little guy
If u want to flash a custom ROM, Siyah v5.0.1.
"To err is human, to forgive is divine"
Sent from my SGS II
Shhh, i'm doing the ExynosAbuse gig!
OP: Wanna root it or you want CWM?
If you just wanna root it neo will owe me $100 (how does 50/50 sounds?)
Sent from the little guy
gastonw said:
Shhh, i'm doing the ExynosAbuse gig!
OP: Wanna root it or you want CWM?
If you just wanna root it neo will owe me $100 (how does 50/50 sounds?)
Sent from the little guy
Click to expand...
Click to collapse
Oh boy gastonw, ur in for a surprise mate!
P. S. I love the way u execute that "ExynosAbuse. Period" gig!
"To err is human, to forgive is divine"
Sent from my SGS II
Makes me sound important, don't it?
Sent from the little guy
I'd like to root it so that I can install the ParanoidAndroid 3+ rom.
I'm new to this, so I'm not sure what CWM is...
wulfgarpro said:
I'd like to root it so that I can install the ParanoidAndroid 3+ rom.
I'm new to this, so I'm not sure what CWM is...
Click to expand...
Click to collapse
CWM stands for ClockworkMod. It is a custom recovery. For more info about CWM:
http://forum.xda-developers.com/showthread.php?p=23527265
@gastonw: Pay up mate!
@OP:
Since you are obviously new to rooting and flashing, may I suggest you read:
Introduction to Android and Galaxy S2
Recovery and Download modes
How to flash using Odin
"To err is human, to forgive is divine"
Sent from my SGS II
Is the custom recovery that you can use for flashing custom ROMs, among other things.
You got 3 choices:
1) flash siyah v5 via Odin (It'll give root + CWM.
2) Root with ExynosAbuse app from chainfire and install CWM via recovery.
3) Install CWM, SU & BusyBox via recovery
My suggestion?
Read more, learn more and watch a video, or two.
Sent from the little guy