[HELP] Fixing Hard Bricked Karbonn S1 / Cherry Mobile Flame 2.0 - Android Q&A, Help & Troubleshooting

Hi ghuyz.. newbie hir, trying to find all ways to revive by Smartphone... here's what happened:
first, i accidentaly formatted the sys boot of my device, resulting to a "reset for entry qpst" error because according to some geeks out there, formatting sysboot actually formats the partition 3 instead of partition 8.. as a resolve for this, i followed certain instructions on how to fix this kind of problem.. unfortunately, i cant find any complete procedures for karbonn s1, so i gambled to follow instructions for karbonn a9+ .. Now my phone is totally dead! It won't power on anymore. It wont even show "charging" when pluged in. I'm just a poor little guy who can't afford buying a new one anymore. For those geeks who have a benevolent heart out there, Please Help! I hate goint to service centers promising me to wait 4 at least 3 months before they can repair it.
Thanks and Godbless..

android4279 said:
Hi ghuyz.. newbie hir, trying to find all ways to revive by Smartphone... here's what happened:
first, i accidentaly formatted the sys boot of my device, resulting to a "reset for entry qpst" error because according to some geeks out there, formatting sysboot actually formats the partition 3 instead of partition 8.. as a resolve for this, i followed certain instructions on how to fix this kind of problem.. unfortunately, i cant find any complete procedures for karbonn s1, so i gambled to follow instructions for karbonn a9+ .. Now my phone is totally dead! It won't power on anymore. It wont even show "charging" when pluged in. I'm just a poor little guy who can't afford buying a new one anymore. For those geeks who have a benevolent heart out there, Please Help! I hate goint to service centers promising me to wait 4 at least 3 months before they can repair it.
Thanks and Godbless..
Click to expand...
Click to collapse
I have the same issue I was trying to install new rom and unfortunately reformat the system drive...if you unroot your phone and ask your manufacturer to repair it or replace it you should have a good acting skills, don't tell them that you were trying to install new ROM because the warranty doesn't include system issues...
GL...
BTW: I wasn't able to find any fix for this issue...I just use my acting skills...LOL

Bricked S5
That happened to my Karbonn TitanS5 or cherry mobile Skyfire 2.0 aswell .. anyone have a walkaround for this?

christopher.silan said:
That happened to my Karbonn TitanS5 or cherry mobile Skyfire 2.0 aswell .. anyone have a walkaround for this?
Click to expand...
Click to collapse
yes there is always a solution, download stock ROM n flash it find the stock ROM in my signature

An image for flame 2
Hmm maybe if somebody can get us a flame2 image
IM Not sure but by going to QPST Download mode nd connecting it to windows and making a backup image through acronis somebody can help us
And we restore the image using the same method.
Request people to connect qpst mode to linux and give us the boot files as windows cant recognize the partitions.
Im also stuck in a similar problem
hope someone can help

You find solution..???
YOU Found SOLUTION..???
YOU Found SOLUTION..???
YOU Found SOLUTION..???

Sort of
kaushal9128 said:
YOU Found SOLUTION..???
YOU Found SOLUTION..???
YOU Found SOLUTION..???
Click to expand...
Click to collapse
Sort of
We Actually need someone who does have a working Titanium S1 or Cherry Flame2.
If you find someone who does have it Please ask them to do the following
1) Switch off the Working Mobile
2) Switch it on by pressing the vol+ Key and wait untill it shows the "Entry QPST Download" Screen
3) Connect your mobile to Windows
4) Start Acronis and make a Sector by sector backup
5) Now Switch on your bricked mobile and connect it to windows
6) Start Acronis and do a restore that you made from the working Titanium S1 or Flame2
7) Reboot
This should do the job.However i was unable to find someone with the same mobile.Hope Somebody can help.
If anybody has the Backup.Please post it so that others can also Restore their mobile if bricked.
Thank you

I will!!
I will make one soon As I get the Phone in hands.. I sure will... Just have patients !!

Please Do!
Please Do!!
I Have sent my mobile to the service center and it has been over three weeks and still no result.
I'll take it back and do it myself as soon as an image surfaces out.
And Thanks!!
That'll be of great Help

Karbonn s1 Titanium/Cherry Flame 2.0 Partition 3 Backup
Did anybody got the solution for fixing a hard brick Karbonn S1 titanium???? By mistake i formatted my boot from clockworkmod... n from that tym its showing Reset for entry qpst download... idk how to fix it... Please sum1 help me out... now its completely dead... so charging... nothing.... Please help me..
Thanks In Advance
Rohan

warmachine68 said:
Did anybody got the solution for fixing a hard brick Karbonn S1 titanium???? By mistake i formatted my boot from clockworkmod... n from that tym its showing Reset for entry qpst download... idk how to fix it... Please sum1 help me out... now its completely dead... so charging... nothing.... Please help me..
Thanks In Advance
Rohan
Click to expand...
Click to collapse
:crying::crying::crying:
Yeah Same Happened With Me No Flashing Lights While Trying To Charge..

0k gonna go round..
OK ok I saw this.I know how you feel.Once I soft bricked my Samsung Galaxy S2..That's so bad.Here's possible solution.Download original ROM from somewhere idk you find it.Download Odin.Try to insert new software with it.If it doesn't works I am so so sorry.
As I heard before the only solution for hard bricked devices is.
Go to very tall building,go to top and throw your phone from there and cry..
For Soft Bricked you can fix it easy.You need to install new ROM.
Soft Bricked or Bootlooped is when you hear only sounds.Your phone reacts on charging but you don't see anything and you can boot into recovery and turn on and off your device.
Hard Bricked Device- Well nothing works.Solution is to throw it into junk..
I'll look out somewhere if I can find any solution.

Solution
android4279 said:
Hi ghuyz.. newbie hir, trying to find all ways to revive by Smartphone... here's what happened:
first, i accidentaly formatted the sys boot of my device, resulting to a "reset for entry qpst" error because according to some geeks out there, formatting sysboot actually formats the partition 3 instead of partition 8.. as a resolve for this, i followed certain instructions on how to fix this kind of problem.. unfortunately, i cant find any complete procedures for karbonn s1, so i gambled to follow instructions for karbonn a9+ .. Now my phone is totally dead! It won't power on anymore. It wont even show "charging" when pluged in. I'm just a poor little guy who can't afford buying a new one anymore. For those geeks who have a benevolent heart out there, Please Help! I hate goint to service centers promising me to wait 4 at least 3 months before they can repair it.
Thanks and Godbless..
Click to expand...
Click to collapse
Hey i think i found solution for this but i haven't tried it yet coz i don't have linux http://forum.xda-developers.com/showthread.php?t=2573743 if u find it useful or have any other solution please let me know. I am so upset since when my S1 is hard brickes that i am using nokia 1208 . please msg me if u find the solution

idragon81 said:
Sort of
We Actually need someone who does have a working Titanium S1 or Cherry Flame2.
If you find someone who does have it Please ask them to do the following
1) Switch off the Working Mobile
2) Switch it on by pressing the vol+ Key and wait untill it shows the "Entry QPST Download" Screen
3) Connect your mobile to Windows
4) Start Acronis and make a Sector by sector backup
5) Now Switch on your bricked mobile and connect it to windows
6) Start Acronis and do a restore that you made from the working Titanium S1 or Flame2
7) Reboot
This should do the job.However i was unable to find someone with the same mobile.Hope Somebody can help.
If anybody has the Backup.Please post it so that others can also Restore their mobile if bricked.
Thank you
Click to expand...
Click to collapse
I was going to post a same request. But i thought i will find it myself. Then i found instructions using acronis with an img file of Archos Platinum 50. Then i flashed that file on S1. Now my phone won't even show RESET FOR ENTRY QPST DOWNLOAD. However it can enter ENTRY QPST DOWNLOAD.

kalmukale said:
I was going to post a same request. But i thought i will find it myself. Then i found instructions using acronis with an img file of Archos Platinum 50. Then i flashed that file on S1. Now my phone won't even show RESET FOR ENTRY QPST DOWNLOAD. However it can enter ENTRY QPST DOWNLOAD.
Click to expand...
Click to collapse
Made a backup of the partitions following you method......but came up with lots of them and dont know which partition is the right one
here is the screenshot

Help!
adubu said:
Made a backup of the partitions following you method......but came up with lots of them and dont know which partition is the right one
here is the screenshot
Click to expand...
Click to collapse
Can anyone please help us.. on how to build the correct image back up for Cherry mobile flame 2.0, we need a complete package that can be flashed thru EMMC Download... or better yet sir can you make a back up using the emmc Download tool? thanks a bunch!
looking forward to resolve this issue.

Can anyone please... Post a Acronis backup file of Partition3sector for Karbonn titanium S1 please.......

Related

[Request] root procedure for Alcatel 916D (FB Spark)

Hi! Can anyone please help me root Alcatel 916D (FB Spark)? A real nice low budget qwerty dual-sim phone running Android GB. I've tried all rooting tools i can find on the web like: SuperOneClick, Unlocker,Doomlord, z4root etc... but nothing seems to work. Lately, i tried flashing a new boot.img based on what i read from a post using a scatter text file, unfortunately now, my phone is bricked and stuck on a bootloop. I brought it to Alcatel Service Center for the reinstallation of its fresh OS coz OneTouch Software Uprade won't allow me to install it on my own. As soon as my 916D is fixed i'll try again to root it and i hope that someone in our community could provide me with a good tutorial and rooting files particularly usuable with 916D.
Likewise, i would also appreciate if someone could provide me a tutorial and files necessary on Increasing the Internal Storage of Alcatel 916D coz its merely 150MB.. Thanks a lot in advance.
Hi,
I have an OT-916 and I need to be root, this phone has an storage problem, only 90Mb internal free, and I need to be root for erase some applications.
I try too with SuperOneClick, Unlocker, z4root, DooMLoRD, SuperOneClickv2.3.3-ShortFuse_ALCAPWN.... but dont work...
Please, help us!!
mecamangeg said:
Hi! Can anyone please help me root Alcatel 916D (FB Spark)? A real nice low budget qwerty dual-sim phone running Android GB. I've tried all rooting tools i can find on the web like: SuperOneClick, Unlocker,Doomlord, z4root etc... but nothing seems to work. Lately, i tried flashing a new boot.img based on what i read from a post using a scatter text file, unfortunately now, my phone is bricked and stuck on a bootloop. I brought it to Alcatel Service Center for the reinstallation of its fresh OS coz OneTouch Software Uprade won't allow me to install it on my own. As soon as my 916D is fixed i'll try again to root it and i hope that someone in our community could provide me with a good tutorial and rooting files particularly usuable with 916D.
Likewise, i would also appreciate if someone could provide me a tutorial and files necessary on Increasing the Internal Storage of Alcatel 916D coz its merely 150MB.. Thanks a lot in advance.
Click to expand...
Click to collapse
Alcatel has open source code for OT-916D - so what we need, that somebody with C++, Java knowledge for Root and CWM, I think.
Source Files
The source files for Alcatel OT-916 (and many other models) can be downloaded here: sourceforge.net/projects/alcatel/files/
As for rooting, I tried every available method, including MTKdroidTools, but none of them work.
I found a guide to root but i haven't teste yet !
http://www.fix-mobile.net/2013/02/como-rootear-alcatel-one-touch-916.html
onthenet said:
i found a guide to root but i haven't tested yet !
http://www.fix-mobile.net/2013/02/como-rootear-alcatel-one-touch-916.html
Click to expand...
Click to collapse
tested !!
Root working great !
onthenet said:
tested !!
Root working great !
Click to expand...
Click to collapse
Thanks for the feedback. I am about to try it as soon as I find alcatel OT-916 driver for windows 8.
By the way, how did you enter in DOWNLOAD mode on your Alcatel OT-916? I can't figure out how to do it.
peter.stojkovich said:
Thanks for the feedback. I am about to try it as soon as I find alcatel OT-916 driver for windows 8.
By the way, how did you enter in DOWNLOAD mode on your Alcatel OT-916? I can't figure out how to do it.
Click to expand...
Click to collapse
turn off your phone without the usb cable plugged in.
plug in usb cable and don't turn the phone on
onthenet said:
turn off your phone without the usb cable plugged in.
plug in usb cable and don't turn the phone on
Click to expand...
Click to collapse
That did the trick, thanks mate! I tested it and it works.
BTW, do you have the stock ROM? I accidentally deleted some system files and need to flash the stock ROM back.
Need Back up from CWM
Hey guys, the guide worked very well. Thanks
Need your help, I'm kinda stuck on bootloop and I haven't made any backup with the cwm.
Can anyone be kind enough to have their back up uploaded so I can restore my phone please?
TIA.
ouychiat said:
Hey guys, the guide worked very well. Thanks
Need your help, I'm kinda stuck on bootloop and I haven't made any backup with the cwm.
Can anyone be kind enough to have their back up uploaded so I can restore my phone please?
TIA.
Click to expand...
Click to collapse
I second this motion If anybody has a whole ROM that can be flashed with SP Flash Tool, please help us les miserables. :angel:
I formatted the phone, now it doesn't even turn on. I wrote Alcatel and asked them for assistance, but still waiting for their reply. I hope they can provide me with the stock ROM. If they don't, I'm afraid I'll have to take it to a repair center.
My Rom for sharing to help
peter.stojkovich said:
I second this motion If anybody has a whole ROM that can be flashed with SP Flash Tool, please help us les miserables. :angel:
I formatted the phone, now it doesn't even turn on. I wrote Alcatel and asked them for assistance, but still waiting for their reply. I hope they can provide me with the stock ROM. If they don't, I'm afraid I'll have to take it to a repair center.
Click to expand...
Click to collapse
Fortunately, I got a friend with the same phone as mine and I got mine working again. Now I made a back up of my ROM.
Will upload the file later for sharing and help those who messed up their rom.
https://docs.google.com/file/d/0B3Z3SYsy2z3tNVQySGFLOUl0UU0/edit
onthenet said:
tested !!
Root working great !
Click to expand...
Click to collapse
nice to know that this work! actually i haven't have this phone yet but really wanna have one and root it because of memory issues, however the link given is not understandable because its of different language..yes i can translate the page to english but not the video in there... so im worried that if i tried to, i am at risk of bricking it since i don't fully understand it and i see this rooting procedure is more complicated than JB on ios... it will be my first root if ever...yes im a newbie(noob) to android, so i hope you can help me and if its ok can you make a video if it does not bother you... i'd look forward to this... thank you very much
I have Alcatel OT-916, not OT-916D which is dual sim, and I tried to follow the procedure in the link but when I tried to flash the phone it just didn't want to connect although I was able to read the ram and all the time I was getting error USB not found.
Now the phone is soft-bricked. I'm able to communicate with it but it just won't turn on, like it's hard bricked.
P.S: I think 916 and 916D have different scatter files, that might be the problem. Still I want to hear second opinion.
__________
I forgot to mention something very important. The phone wasn't bricked 'till I tried flashing with option DA Download All checked, which kind of worked, the progress bar went to 100% but I got error BROM ERROR:S_DL_GET_DRAM_SETTING_FAIL(5054).
peter.stojkovich said:
That did the trick, thanks mate! I tested it and it works.
BTW, do you have the stock ROM? I accidentally deleted some system files and need to flash the stock ROM back.
Click to expand...
Click to collapse
we have same problem. but thank for sharing the backed up CWM mod.
thanks alot it helped me.
_________________
BIG THANKS
:good::good::good:

[Q] [THL W8 BEYOND ] HOW TO ROOT and GPS FIX

Hi to all!
I recently bought this phone, I have to admit to being fully satisfied of the features except for one ... the GPS function.
I have read dozens of guides to adjust the GPS W8+ but not for my model. If I knew how to do the root I could at least try to use the same method.
Does anyone have suggestions on how to do it on this phone?
THL W8 Beyond
Hello, i have also bought a thl w8 beyond and i have the same questions, if anyone could help id be very apreciated!! Thanks
Root
hi,
Motochoper root hack fail on W8 beyond.
THL W8 Beyond:Recovery,Root máy
birdyisme said:
hi,
Motochoper root hack fail on W8 beyond.
Click to expand...
Click to collapse
I'am Thienhoa3 in Tinhte.vn
Topic install recovery and root THL W8 Beyond MT6589t
Seach google THL W8 Beyond root,recovery tinhte.vn
link: tinhte.vn/threads/thl-w8-beyond-recovery-root-may.2132474/#post-38561380
Thanks thienhoa
Hi thienhoa,
Thanks for this tutorial.
With the help of C3C076 (thanks for the recovery image) , I proceed in the same way.
This archive contains all the necessary and also a howto.
link: ovh.to/GrW17MP
thienhoa said:
I'am Thienhoa3 in Tinhte.vn
Topic install recovery and root THL W8 Beyond MT6589t
Seach google THL W8 Beyond root,recovery tinhte.vn
link: tinhte.vn/threads/thl-w8-beyond-recovery-root-may.2132474/#post-38561380
Click to expand...
Click to collapse
So I got mine W8 beyond two days ago.
So far so good, but:
1. GPS problem. I am geocacher (more at: geocaching.com) and I need accurate GPS. When I stood still in the open for few minutes, I could see GPS jumping around for 400-900 meters for no reason. AGPS and EPO activated. We will see how it goes
2. I would love to get polish language settings, since there are some apps which fetch the content depending on Your language setting (I know that this is poor design, but this is how they works), so that would be nice. Not an issue anymore. I installed MoreLocale2 and pm'ed it which is more than enough at the moment.
3. I do not see option for sorting the apps in the main apps menu (it was working on my old Lenovo A750) - am I missing something?First 9 icons are fixed and alphabelical, the rest is just alphabetical. I can live with that.
4. I have my contacts stored with country prefix which is not used by my operator. I do not see my contacts data when they are calling me.
The SMSes are provided by operator with country prefix, so the problem is with calls only. I tried to follow this thread http://forum.xda-developers.com/showthread.php?t=2268120 but I am unable to decompile framework.jar - no classes.dex inside. I am not able to deodex framework.odex either, so I am stuck for the moment.GravityMod2 3.0 ROM fixed that problem.
The link provided with the tools and howto contains W8_beyond.JB2.FHD.EN.COM.8P128_MT6589TV1.0.1_20130618-cwm6033.img,
when I go to phone info at my phone I can see W8_beyond.JB2.FHD.EN.COM8P128_MT6589TV1.0.2_20130626.
Seems like I have newer firmware. If anyone can tell me how to extract this, I would be more than happy to share.
GravityMod2 3.0 installed - not an issue anymore
For my good old Lenovo I was able to modify the ROM as soon as I got my hands on any ROM in zip format. I guess I could also try to compile something (I am a programmer), but since I am extremely low on time I would need MT6589T kernel patch (is it the same like mt6589) and some basic manual.
Anyone interested?
Fix GPS
Topic fix GPS on Mediatek
diendan.mobiistar.vn/index.php?posts/104048[/url]
thienhoa said:
Topic fix GPS on Mediatek
diendan.mobiistar.vn/index.php?posts/104048[/url]
Click to expand...
Click to collapse
Thanks, but I got A-GPS and EPO already enabled and EPO downloaded.
I till try to go to the engineering menu and locking via YGPS.
As I understood from google translator, I should just wait for lock and then close everything. Since then everything should be running smoothly. Am I right?
What about my other questions? Lack of polish is driving my crazy. My news feeds are all US which is driving me crazy ...
w8 beyond dead
Guys ..... HELP!!!!
with my habit of fiddling I think I brick the cell.
I tried the guide for root and recovery for the beyond, but now I can not turn on anymore, not even in recovery mode, the LED does not light up even if I put it on charge.
Can anyone give me some advice on where I can start to revive the terminal?
Thanks in advance. :crying::crying::crying::crying::crying::crying:
ilmeccanico said:
Guys ..... HELP!!!!
with my habit of fiddling I think I brick the cell.
I tried the guide for root and recovery for the beyond, but now I can not turn on anymore, not even in recovery mode, the LED does not light up even if I put it on charge.
Can anyone give me some advice on where I can start to revive the terminal?
Thanks in advance. :crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
I am not sure if it helps (I am quite sure it does not acctually), but which version was running on your phone prior to root attempt? Which part has failed? writting the CWM image or rooting?
Try to connect the phone to the PC via usb and then turning it on. If PC reacts (ADB device as far as I rememeber will be recognized) then there might be chance for You.
Low_Man said:
I am not sure if it helps (I am quite sure it does not acctually), but which version was running on your phone prior to root attempt? Which part has failed? writting the CWM image or rooting?
Try to connect the phone to the PC via usb and then turning it on. If PC reacts (ADB device as far as I rememeber will be recognized) then there might be chance for You.
Click to expand...
Click to collapse
When work was mounted W8_beyond.JB2.FHD.EN.COM.8P128_MT6589TV1.0.1_20130618
I followed this guide
h**p://***.tinhte.vn/threads/thl-w8-beyond-recovery-root-may.2132474/ # post-38561380
in the end I also showed the window of ok with the green circle but by that time you are no longer on again.
if I connect it to the PC you will hear the sound that is connected but nothing happens
ilmeccanico said:
When work was mounted W8_beyond.JB2.FHD.EN.COM.8P128_MT6589TV1.0.1_20130618
I followed this guide
h**p://***.tinhte.vn/threads/thl-w8-beyond-recovery-root-may.2132474/ # post-38561380
in the end I also showed the window of ok with the green circle but by that time you are no longer on again.
if I connect it to the PC you will hear the sound that is connected but nothing happens
Click to expand...
Click to collapse
Have You tried reflashing it again with this: ovh.to/GrW17MP?
yes i tried it
Does the GPS works fine on this phone? i would like ot buy this phone....
SICOPOLY said:
Does the GPS works fine on this phone? i would like ot buy this phone....
Click to expand...
Click to collapse
Mine work - kind of ...
After getting the fix the coordinates jumps for 1-2 second every 5 seconds.
This makes it troublesome but possible for navigation
what SAR rating for thl w8 beyond?
Anyone knows how can you root the latest 1.0.2 w8 beyond version?
Getting "Incorrect scatter file format" error
birdyisme said:
Hi thienhoa,
Thanks for this tutorial.
With the help of C3C076 (thanks for the recovery image) , I proceed in the same way.
This archive contains all the necessary and also a howto.
link: ovh.to/GrW17MP
Click to expand...
Click to collapse
Hi,
Thanks for this great tutorial and for arranging all the needed files in one location!
I have a small problem
1. When I open the flash tool I get the following error: "fail to load a raw data file: "c:\users\stephane\Desktop\thl8beyond\W8_beyond.JB2.FHD.EN.COM.8P128_MT6589TV1.0.1_20130618-cwm6033.img
2. When I continue the falsh tool opens but when I try to upload the scatter file I get the following error: "Incorrect scatter file format!"
3. My current build number is: W8_beyond.JB2.FHD.EN.COM.8P128_MT6589TV1.0.2_20130626. Can I still use the image you provided ?
Thanks a lot in advance!
Hi guys,
I am having trouble to install the drivers for the THL W8 Beyond that I have. My model is:
W8_beyond.JB2.FHD.EN.COM.8P128_MT6589TV1.0.1_20130618
When connecting it to the computer it will install HTC drivers under Android Phone entry in device manager and also W8 Beyond under Portable Device.
I cannot root the phone using the msdos script or SP Flash tool. Also Snapea does not see the device. On the same computer I used a ZOPO C2 Platinum and Snapea found that instantly and I could rooted and also pushed a custom ROM.
Now... wish I could also root this THL to be able to back-up my stock ROM. No need for me to work with a custom, just need to be able to back-up the original ROM just to be safe.
Can you please help me in regards to the communication problem between computer with Win 7 64bit and the THL W8 Beyond phone?
Thank you.
lepsulet said:
Hi guys,
I am having trouble to install the drivers for the THL W8 Beyond that I have. My model is:
W8_beyond.JB2.FHD.EN.COM.8P128_MT6589TV1.0.1_20130618
When connecting it to the computer it will install HTC drivers under Android Phone entry in device manager and also W8 Beyond under Portable Device.
I cannot root the phone using the msdos script or SP Flash tool. Also Snapea does not see the device. On the same computer I used a ZOPO C2 Platinum and Snapea found that instantly and I could rooted and also pushed a custom ROM.
Now... wish I could also root this THL to be able to back-up my stock ROM. No need for me to work with a custom, just need to be able to back-up the original ROM just to be safe.
Can you please help me in regards to the communication problem between computer with Win 7 64bit and the THL W8 Beyond phone?
Thank you.
Click to expand...
Click to collapse
The easiest and only way i could root my W8 beyond is with this program:
droidchina.com/forum/Thread-ROOT-GUI-Root-Wizard-for-MTK65xx-phones

Help ! Lenovo tab A10-30 hard bricked

First of all, sorry for my bad english. My problem started when i deleted accidentally one partition of the tablet, trying to make an working twrp for it. Now I have no adb commands, no recovery, no fastboot,no logo,no display light. Nothing works. Just an expensive brick. PC only see something like "diagnosis 900E, instead of USB QDLoader 9008,so QFIL can do nothing to fix.I have changed driver,now can be seen QDLoader but QFIL gave me errors. I just bought another tablet, same model, for my son. I will try to pull out system, recovery, boot etc. But after that...? Any chance to make an bootable microSD card with those files? Any advice please?
Costi979 said:
First of all, sorry for my bad english. My problem started when i deleted accidentally one partition of the tablet, trying to make an working twrp for it. Now I have no adb commands, no recovery, no fastboot,no logo,no display light. Nothing works. Just an expensive brick. PC only see something like "diagnosis 900E, instead of USB QDLoader 9008,so QFIL can do nothing to fix.I have changed driver,now can be seen QDLoader but QFIL gave me errors. I just bought another tablet, same model, for my son. I will try to pull out system, recovery, boot etc. But after that...? Any chance to make an bootable microSD card with those files? Any advice please?
Click to expand...
Click to collapse
So use ZTE tool studio emmc tool to unbrick your android.
Follow guide of Androidbrick.com.
The tool posted on these site is actually a ZTE tool studio tool by name of Androidbrick tool.
Just Google and download it from torforum.org
Already tried,not working.I cannot swich phone in download mode
Costi979 said:
Already tried,not working.I cannot swich phone in download mode
Click to expand...
Click to collapse
These tool unbrick your android when no fastboot, no recovery, not booting by anyways. Just detects in 9008 port. I am sure it's better than Qfil.
That`s the problem with port detection
How does this happened ?
Hello Costi979,
Sorry for your tablet, I hope you will find a solution
I wanted to know if this happened when trying to install TWRP on this tab2 10-30 tablet, under Android 6.0.1, like explained in this thread : http://forum.xda-developers.com/android/development/recovery-lenovo-tab-a10-30f-l-twrp-3-0-t3442588 ? Can you confirm that it does work or not ?
Thanks for your explanations,
I hope you will success to recover your tablet,
Regards,
Sebastien
Barnabe02 said:
Hello Costi979,
Sorry for your tablet, I hope you will find a solution
I wanted to know if this happened when trying to install TWRP on this tab2 10-30 tablet, under Android 6.0.1, like explained in this thread : http://forum.xda-developers.com/android/development/recovery-lenovo-tab-a10-30f-l-twrp-3-0-t3442588 ? Can you confirm that it does work or not ?
Thanks for your explanations,
I hope you will success to recover your tablet,
Regards,
Sebastien
Click to expand...
Click to collapse
Sorry if u have issues to. My problem started when i erased via adb one partition . Twrp works fine

AT&T Alcatel OneTouch Allura (5056O) - Looking for Stock ROM

I am currently in communication with Alcatel's U.S. support (which may be outsourced, who knows?), and they have made it clear there is no OTU (OneTouchUpdate) available for the AT&T Alcatel Allura 5056O device. Their current advice is limited to performing a factory reset via the GUI, which of course isn't possible for a softbricked phone.
This means that as of this writing, there is no known way to restore this device from a softbrick.
I am explaining carefully the issue I and and a number of others here on XDA have experienced with this phone to Support, specifically asking for some method to reload the stock ROM, and will report any constructive suggestions they may have. But the OTU I made available at:
https://www.multcloud.com/share/0377ab37-15ed-4bcd-be3b-dbe8c7eb2cc8
...that lists the 5056 simply will not work on the 5056O.
Received this from the Contact Center:
The firmware is information that would only be available at the repair center. We would recommend you to perform a factory reset...
Click to expand...
Click to collapse
Still trying, but it isn't looking very good for those of us with softbricked 5056Os...
Yup I wanted to root the phone, so I did but then it bootlooped and it's bricked lol.
Haven't heard anything else from Alcatel's Customer "Support," so I've resent my questions to see if I can get some answers out of someone. There are enough of us affected by this issue that I'm not going to let them off quite so easily...
More bad news; the most recent reply from Alcatel CS:
At this moment it would be to send in the device into the repair center to get it repaired for you.
Click to expand...
Click to collapse
Clearly they are going to be less than helpful for those of us with the 5056O. Unless some kind soul here who has this phone is willing to image and post a copy of the Allura ROM, or someone knows a tech working for Alcatel who can supply the ROM, those of us with soft-bricked phones are completely screwed.
Am getting same info from Twitter CS...the ROM is only available inside their repair center.
(*sigh*) So unless someone else manages to liberate this device's ROM, guess we all might as well throw the devices in a drawer and move along. Just remember that the next time you're phone shopping, and bypass the Alcatel/TCL offerings.
Friends here I leave a link for you to download a copy I made to the Alcatel Allura 5056O, I did it through the flashfire application, I think if some advanced developer could work it, it would solve the problem we have. Https://mega.nz/#!01NDVR5K!rPPYEd87ndmg5Q9jmQ3qWjm1qGD3Rm7ge83yIsezSSQ
Excuse my bad English, I'm from Venezuela.
sanpuyon said:
Friends here I leave a link for you to download a copy I made to the Alcatel Allura 5056O
Click to expand...
Click to collapse
That is excellent, thank you very much!
Now let me make sure I understand; is this a copy of a softbricked ROM, or a functional one? Is it rooted or non-rooted?
CharlieSummers said:
That is excellent, thank you very much!
Now let me make sure I understand; is this a copy of a softbricked ROM, or a functional one? Is it rooted or non-rooted?
Click to expand...
Click to collapse
It is a copy of a functional rom, has root access and has modifications that I did before the device would damage me, but I have all my data in it.
sanpuyon said:
It is a copy of a functional rom, has root access and has modifications that I did before the device would damage me, but I have all my data in it.
Click to expand...
Click to collapse
So, if we can figure out how the Alcatel OTUs push the ROM to the phone, we might be able to get a softbricked phone to the point of performing a system reset...
Time to start reading up on how...
CharlieSummers said:
So, if we can figure out how the Alcatel OTUs push the ROM to the phone, we might be able to get a softbricked phone to the point of performing a system reset...
Time to start reading up on how...
Click to expand...
Click to collapse
The problem with my phone is that I made a modification to the build prop and upon restart I just showed the logo and then black screen, connect it to the adb and try to carry a custom recovery of a 6040A alcatel I had before and the result was that too Delete the recovery stock, now the phone when I connect it to adb appears to me as unauthorized, so I have not been able to repair it
sanpuyon said:
now the phone when I connect it to adb appears to me as unauthorized, so I have not been able to repair it
Click to expand...
Click to collapse
Keep trying. I've noticed that my 5056O does the same thing, but if I keep trying (restarting the phone, plugging in-and-out, etc.) I can eventually get adb devices to show it as "device" at which point I can acquire a shell, which can be SU'd.
Not guaranteeing this will work for you, but it has worked for me quite a few times so far. Beginning to think this phone is just magic, not science.
Just a quick bump to remind folks there are a bunch of soft-bricked 5056O phones out here in desperate search for a ROM...
Another bump to see if anyone has additional information on 5056O ROMs...hope springs eternal!
Still nothing, eh?
Hoping for someone with info on how to unbrick an Alcatel OneTouch Allura (5056O) - a stock ROM and means for recovery would be great!
Dear friends, after suffering for more than a year with my damaged phone, find a solution, I hope you can also solve it.
Here is a guide and the link to download the tool.
In the completely off phone will press the volume up and down keys at the same time and connect it to the pc so enter the download mode
1) Download the tool from this link https://mega.nz/#!NpkhnCoT!q5LxwJdWfIjcIY2tl99eGbhvRtrSY8bk-GQcDji7Rhs
2) Then unzip it install it on the pc
3) They execute it and they place the user and the password that he left in the attached note, when the update comes out they tell him not to
4) They look for the model of the team and they give to the option of flash and enjoy the magic
The only bad thing is that in the process the network release is lost
sanpuyon said:
Dear friends, after suffering for more than a year with my damaged phone, find a solution, I hope you can also solve it.
Click to expand...
Click to collapse
Um, last time I checked, the 5056O didn't have available ROMs outside AT&T. Is this the phone you repaired?
Also, latest version of SUGAR I found is v11.6.9R, which I placed in the MultCloud shared folder at https://www.multcloud.com/share/0377ab37-15ed-4bcd-be3b-dbe8c7eb2cc8 in the Misc folder. Same credentials as listed in the older README:
Region: All
Username: SU_IN.Panasonic
Password: KoD8naL2
Dongle authorization: unchecked
sanpuyon said:
The only bad thing is that in the process the network release is lost
Click to expand...
Click to collapse
My fault being unfamiliar with this stuff, but can you explain what was lost?
Oh, and I don't suppose this got you any closer to installing a custom recovery to root the phone?
does anyone have a link to the stock firmware? for an ALcatel onetouch Allura 5056O, I've been browsing the thread and seen none of the links provided for the stock firmware are all dead.
Better late than never: https://www.androidfilehost.com/?fid=10620683726822061932
I had hat on a HDD from a while back and never had a way to use it until I found edl. I'm currently flashing it now and I have no idea if it's gonna work or not. I don't think it will but who knows.
Also, its probably gonna take a few days or more to flash...
Edit: It failed at some point just a few hours in. Maybe it was just my device because I have disassembled it in the past looking for test points. I wish everyone else good luck.

Realme U1 unable to boot at all

Greetings, everyone. I'm unable to boot my Realme U1, after a recent unwise decision of relocking its bootloader after flashing a custom boot image i found over this thread: https://forum.xda-developers.com/android/help/method-rooting-realme-u1-t3916683
I hadn't encountered locked bootloaders before, so I realised it isn't supposed to work with android pie, which resulted in a system crash.
Now i'm unable to get the device recognized by my pc at all,and it keeps saying that the current boot image is destroyed and cannot boot.
Also, only recovery mode is working.
Any suggestions on what i must do to fix this?
any kinda help would be greatly appreciated
and thanks
I also have exact problem no solution till now!!!
ps1084 said:
Greetings, everyone. I'm unable to boot my Realme U1, after a recent unwise decision of relocking its bootloader after flashing a custom boot image i found over this thread: https://forum.xda-developers.com/android/help/method-rooting-realme-u1-t3916683
I hadn't encountered locked bootloaders before, so I realised it isn't supposed to work with android pie, which resulted in a system crash.
Now i'm unable to get the device recognized by my pc at all,and it keeps saying that the current boot image is destroyed and cannot boot.
Also, only recovery mode is working.
Any suggestions on what i must do to fix this?
any kinda help would be greatly appreciated
and thanks
Click to expand...
Click to collapse
This u read?
https://www.getdroidtips.com/stock-rom-realme-u1-firmware/
Please reply
I accidentally hard bricked my realme u1 while I am rooting it.
Any solution please reply.
ps1084 said:
Greetings, everyone. I'm unable to boot my Realme U1, after a recent unwise decision of relocking its bootloader after flashing a custom boot image i found over this thread: https://forum.xda-developers.com/android/help/method-rooting-realme-u1-t3916683
I hadn't encountered locked bootloaders before, so I realised it isn't supposed to work with android pie, which resulted in a system crash.
Now i'm unable to get the device recognized by my pc at all,and it keeps saying that the current boot image is destroyed and cannot boot.
Also, only recovery mode is working.
Any suggestions on what i must do to fix this?
any kinda help would be greatly appreciated
and thanks
Click to expand...
Click to collapse
Hey man!
It's not a hardbrick, its soft brick.
If you can access recovery then flash a custom recovery, then flash the original boot.img and recovery.img, then reboot to COS recovery flash your ozip and reboot this should fix it!
Hope this helps!
Hi there I am new to this forum and I don't know that I am posting at right place . I have my Ralme U1 phone hard bricked and unable to turn on not Even it is detecting the charger. but when I connect it with my PC and hold power button for 7 to 9 second the device manager shows Realme Preloader as the device name and it stays there only for 2 seconds and then it again gone. Is anyone have the solution on how to unbrick it Please Help!!!!
DHANOLA said:
Hi there I am new to this forum and I don't know that I am posting at right place . I have my Ralme U1 phone hard bricked and unable to turn on not Even it is detecting the charger. but when I connect it with my PC and hold power button for 7 to 9 second the device manager shows Realme Preloader as the device name and it stays there only for 2 seconds and then it again gone. Is anyone have the solution on how to unbrick it Please Help!!!!
Click to expand...
Click to collapse
Hello Mate!
I hard Bricked Realme U1 over 2 times and recovered it!
MTK chipset devices are easy to unbrick.
I would love to help you, anyway to contact??
[email protected]#$ said:
Hello Mate!
I hard Bricked Realme U1 over 2 times and recovered it!
MTK chipset devices are easy to unbrick.
I would love to help you, anyway to contact??
Click to expand...
Click to collapse
You can contact me by mail: [email protected]
DHANOLA said:
You can contact me by mail: [email protected]
Click to expand...
Click to collapse
Hello Everyone!! It has been two years for me to be in this situation. I get mail from many of those who have a similar problem. So I am here, providing the solution to how I solved this solution.
For the solution, you may, first of all, join the given below Telegram. Link from anybody's phone and ask there for your problem or describe your problem in the group someone will help you out. The group icon has been attached.
Just connect to them on telegram and tell your issue they will surely help..
Telegram link
https://t.me/RealmeU1
Or search for Realme U1 group in telegram
Group icon attached
If then also you need help, please contact me by my mail. As mentioned in the above chat reply,

Categories

Resources