[Q] [HELP] Fixing Hard Bricked Karbonn S1 / Cherry Mobile Flame 2.0 - Android Q&A, Help & Troubleshooting

Hi ghuyz.. newbie hir, trying to find all ways to revive by Smartphone... here's what happened:
first, i accidentaly formatted the sys boot of my device, resulting to a "reset for entry qpst" error because according to some geeks out there, formatting sysboot actually formats the partition 3 instead of partition 8.. as a resolve for this, i followed certain instructions on how to fix this kind of problem.. unfortunately, i cant find any complete procedures for karbonn s1, so i gambled to follow instructions for karbonn a9+ .. Now my phone is totally dead! It won't power on anymore. It wont even show "charging" when pluged in. I'm just a poor little guy who can't afford buying a new one anymore. For those geeks who have a benevolent heart out there, Please Help! I hate goint to service centers promising me to wait 4 at least 3 months before they can repair it.

Related

[Q] What have I done?? (Huawei 8120 (Vodafone 845))

Hi everyone!
I have (what I think is) a huge problem on my phone and after looking in tons of forums for solutions I found that the people here seem to really be able to help me.
I'm new to android phones... So please bare with me...
So I bought this phone in second hand from a friend who was in need of some cash for college (I don't really like to buy used stuff but...), and it came rooted with cyanogenMod7 but I was having trouble cause the phone wouldn't recognize my sd card and I couldn't connect it to my pc so I tryed to change it back to its original settings...
Its a vodafone 845 (huawei U8120)..
A friend of mine tried to help and we found this recovery menu (Clockwork recovery v3) and he chose some format options (format boot, system and data) and now the phone is useless! It still doesn't recognize my SD card or my pc, I can get into this recovery menu again but cant seem to fix the problem!
Other than that all the phone does is show the initial hourglass forever...
I would be so gratefull if someone could help! Thank you in advance!

Bricked tab ??

Hi,
some of them have seen my interest on this tab,
unfortunately, it seems it has gone a bit too far.
today,i made a reset through the parameters, and it stuck (had a custom recovery and root)
trying to hard reset did not help
now, i've got an 0x19000008 error when trying to erase userdata with hard-reset procedure
and i'm struck on iconia tab logo
trying to recover my backup using nikagl recovery without data partition did not help as it remains block
i still have access to fastboot
what is your advice on that ??
which trick might help or is it good for service ?
FYI, i double post in dedicated forum which is a bit empty.
sorry about that, but help is NEEDED

[Q] Urgent Helpppp !!!

my karbonn a9+ hard bricked
i accidentaly formatted the sys
boot of my device, resulting to a "reset
for entry qpst" error because according
to some geeks out there, formatting
sysboot actually formats the partition 3
instead of partition 8.. as a resolve for
this, i followed certain instructions on
how to fix this kind of problem..
unfortunately, i cant find any complete
procedures for karbonn s1, so i
gambled to follow instructions for
karbonn a9+ .. Now my phone is totally
dead! It won't power on anymore. It
wont even show "charging" when
pluged in. ...
pls help

question about_understand dead boot problem on android phones

we know that almost every android phone need to have downlod mode to flash os firmware or update manualy .....!!!
but we got lot of phone at dead condition though i repair dead boot via some tools boxes and mmc method but
at same time i failed many times waste lot of time to check about problem ..my question is that
when we can understood or what is basic things to understood that phone have dead boot problem or it has hardware problem
forum members and mods who repair available dead boot please share your experience
how you confirm when you decide to go dead boot repair ...please share you best experience

Micromax MT500 Bricked after flashing

Dear all,
I have a Micromax MT 500 Canvas Blaze mobile which comes with GSM+CDMA(MTS). It was having so many issues and tried hard reset too but did not work hence decided to flash my phone. Hence googled some information and finally I installed Qualcomm Drivers in my system and then downloaded Operating system files. But it had 2 OS collections as below
Micromax-MT500-A30-2050-Sandisk-EMCP-SD5DH26A-4G_(by_xdafirmware.com)_2
Micromax-MT500-A30-2050-Hynix-EMCP-H9DP32A6AJACGR-KE_(by_xdafirmware.com)
I was rather confused on which OS should I select. Finally decided to go with Sandisk the first one. Successfully flashed using Muti Port tool. But to my astonishment the phone got bricked it is now not even powering on. When I researched google more I found that I had flash wrong files so that it got bricked. Hence I would need your expertise to bring back my mobile to life without taking it to Service Center.
Hope I would get better solution here. Thanks in advance.

Categories

Resources