Hardshell case - Transformer TF300T Accessories

I recently got my TF300T and I'm looking for a hardshell case, as most of the ones I've come across are sleeves, huge rubber cases. I have found some "full" cases but they are made of leather. Any recommended cases? I will more than likely always have the dock on but it should have an easy release method if I need just the tablet.

Have you looked on Ebay or Amazon?
I'm gonna start looking for an actual hard case to carry mine in. I've been sliding it the laptop compartment of my backpack but I'm worried the screen is gonna get cracked. Matter of fact, I'm gonna go look at Ebay and Amazon right now.
If I see anything like what you're looking for I'll post you a link.

maybe something like this?
http://www.ebay.com/itm/rooCASE-Sli...es_Covers_Keyboard_Folios&hash=item2ebec51eaf
Greetings!

Something like a less heavy duty version of this: http://www.amazon.com/Heavy-Transformer-TF201T-Pad300-TF300T/dp/B008B11FB8/ref=sr_1_16?ie=UTF8&qid=1388019602&sr=8-16&keywords=tf300t+case?

I have the slim fit folio case and it's not that great

I have a leather case for both the tablet and the dock. It makes it like a little netbook when both are attached. Works quite well for me but then I am the only one to use the tablet and don't let it near any kids. I got it from Amazon. As I am on less than 10 posts I cannot but a link in here

Related

rooCASE Slim-fit Case Review - Dock without having to remove your case

Just received the rooCASE Slim Fit from PC Micro via Amazon.com. Sorry, I can't yet post links, so the product title is: rooCASE Slim-Fit (Black) Folio Case Cover with Multi Adjustable Viewing Angles for Asus Eee Pad Transformer 10.1-Inch TF101 Android Tablet Wi-Fi.
I had been looking for a while for a case with clips that would leave the bottom edge open so that one could dock the tablet without taking it off, so I was excited to try it out. My initial feelings are very positive.
It's PU leather, so while not top grain, it's still pretty supple and smooth. The leather is also slightly padded, so the case is comfortable to hold. The reinforced edges are crisp and straight, so there's not a lot of give or bend. The interior is a soft, padded microfiber. The foam is pretty firm, so it seems like it might retain its shape fairly well.
Structurally, the tablet is held in by two clips on each side, one each holding the top corners (when in landscape) and the main clip about 2/5 of the way down each side. On the bottom corners, there are clips, but they're more like corner protectors as they're there to guide the tablet when the case is closed.
Setting the tablet in the first two grooves felt good. The furthest groove which puts the screen in the flattest position though doesn't hold very well. This is because the rounded back of the tablet near the edge doesn't let it sit all the way into the groove. This doesn't bother me though since I don't see myself wanting to use it that flat. It actually sits nicely on my lap in the middle groove, so it's nice to be able to prop up the tablet without having to rely upon the dock.
Speaking of which, swinging the bottom edge of the tablet away from the case allows it to easily connect to the dock. Before receiving the case, I wondered whether the clip that holds it closed would get in the way. In actuality, it props up the keyboard rather well -- the keyboard rests flat between being propped up on the clip and because of the way the dock hinge props up the rear of the keyboard. Alternatively, the case cover folds back out of the way easily as well, and kind of works to support the screen a little bit. This configuration is probably better suited for a desk vs. one's lap, but I'll have to experiment a little bit.
I'm interested to see how I like using it over time, but for right now, this case has potential. I was worried about the clips: whether they'd be too weak (they're not) and whether they'd prevent the case from folding flat (they don't). I like that they hold the tablet securely in place, without the need to have the bezel surrounded/covered by leather.
The overall look resembles a small notebook/portfolio and the branding is understated -- just an embossed rooCASE logo in the lower right.
It seems like the case will protect the tablet from accidental bumps and bruises, give it a sleek appearance and quench my thirst for a higher end case until Noreve or Piel Frama attempt to separate me from my money. We'll have to see how durable it winds up being -- right now, the surface seems to repel light scratches pretty well.
Overall, for $30 I'm pretty pleased. And it comes with a small capacitive stylus, that connects to the tablet via a small plastic plug that fits into the 3.5mm jack. Shipping was via USPS and took just two days from CA to the east coast.
Lots of pics to follow.
More pics.
Last two.
(I promise, Mods)
And to complete it all, here's the link: http://amzn.com/B0058DLAA8
Can't wait for mine to arrive!
Mine came in yesterday as well. I am extremely happy with it, I did not anticipate being able to dock it with the case on, so all the best. The bundled stylus from roocase is just the cherry on top!
damn thats nice
It's great news that there's finally a decent case that you don't have to remove in order to be able to dock with the keyboard. Hopefully more manufacturers start making cases in this design.
EDIT: Hmm I have a theory... if you buy one of those cases with velcro at the bottom, could you theoretically dock it without taking off the case by just unattaching the velcro? Can anyone confirm or deny?
Can you fold it up in the dock with the case on?
maxpower47 said:
Can you fold it up in the dock with the case on?
Click to expand...
Click to collapse
no
--------
This is the first case I have seen that uses clips to hold the Transformer, instead of a leather or fabric frame of some sort. I was beginning to think there weren't any out there. Thanks for the review.
Thank you for the review, I was waiting to see if you could plug the dock with the case on..
BTW, there are 2 other brands of what looks like the same case: Acase and Poetic...
http://www.amazon.com/Poetic-Stand-...B3PU/ref=sr_1_5?ie=UTF8&qid=1311946471&sr=8-5
http://www.amazon.com/Transformer-L...Q6J0/ref=sr_1_5?ie=UTF8&qid=1311946529&sr=8-5
SoundSurfer said:
Thank you for the review, I was waiting to see if you could plug the dock with the case on..
BTW, there are 2 other brands of what looks like the same case: Acase and Poetic...
http://www.amazon.com/Poetic-Stand-...B3PU/ref=sr_1_5?ie=UTF8&qid=1311946471&sr=8-5
http://www.amazon.com/Transformer-L...Q6J0/ref=sr_1_5?ie=UTF8&qid=1311946529&sr=8-5
Click to expand...
Click to collapse
Their are the same one from same factory. Just selling via different sellers.
xjarl said:
Their are the same one from same factory. Just selling via different sellers.
Click to expand...
Click to collapse
The Acase one is eligible for Amazon Prime. It can be in my grubby paws tomorrow.
Just received one.
I originally bought the regular multi-angle roocase version. As soon as this slim-fat was announced, I unloaded that one and pre-order this one.
They delayed the shipment for 1 week but refunded my $5 shipping charge (nice). I like this slim-fat version a lot. It's the best case I've seen (I need some protection, but I really hate to cover-up the beauty of the Tab).
Received mine today. I echo everything that the OP noted. Very nice and exactly what I was looking for.
I just ordered the $18.95 Poetic one with free shipping. I can wait a few days and save $16
I have a cheapy $12 case now from ebay. Gets the job done, but with my ghetto cutting of the area around the light sensor and front camera, it looks just a wee bit unprofessional.
Thank you for the informative review. You may have just convinced me to buy a second case.
I already have this on order it shipped out yesterday so I'm hoping it arrives soon, and after your review and all the great pics. I hope it comes even faster now. Thanks for your time in making this, good info.
thaibruin said:
I just ordered the $18.95 Poetic one with free shipping. I can wait a few days and save $16
I have a cheapy $12 case now from ebay. Gets the job done, but with my ghetto cutting of the area around the light sensor and front camera, it looks just a wee bit unprofessional.
Click to expand...
Click to collapse
I unfortunately do not have that kind of patience. Case ordered and overnighted. My TF will finally have a case that doesn't hide it.
Mine arrived today too. OP is spot on - this is a great case; clean lines, excellent fit and looks sharp.
There is no slot at the bottom to connect to the charger, so to charge it, I have to lay it face up w/ the cover open.

Silicone case on Amazon

Has anyone purchased this silicone case from Amazon?
http://www.amazon.com/iShoppingdeal...2?s=electronics&ie=UTF8&qid=1317307713&sr=1-2
I ordered one yesterday and I'm hoping it's better than the silicone case I got from China. It's ok but just a little loose. The picture of the case on Amazon looks different so I figured I'd give it a shot since the price was reasonable.
No, but thanks just ordered it. The targus portfolio case is nice for most of the time, but I'm looking for something for around the house.
It's already sold out.
I thought it might go out of stock after people realized it was on Amazon. As stated in my op - the one I ordered from China off ebay is a little to loose. The cutouts are great but I'm looking for something a little tighter.
I can't see the price since it's unavailable. How much did you guys buy it for? Was it better than Sikai's price of $17.00?
I'm not so sure on the design. Back looks kind of weird, Sikai has a grippy texture like micro-cobblestone. Also the Sikai case comes up around the trim of the screen farther than this one. This one looks like an iPad silicone case I bought a year ago that had this thin lip where the edges are and it would fall out extremely easily.
The Sikai case isn't loose at all, it might be based on when you bought it or what color but the clear one I bought is tight as a glove with literally no probability of falling out even holding it one handed. It's very well made.
Case is $10.95 and I have Amazon Prime so shipping was free for me. Maybe I should have phrased my comments regarding the Sikai case differently. I do like the texture of the Sikai case and how much of the TF it actually covers but when I go to pull it out of my bag the edge along the face moves way too easily. Granted it isn't loose to the point of it falling off on its own but it also shouldn't come out with a minor movement - only if I'm trying to remove it intentionally.
http://www.ishoppingdeals4you.com/i...froogle&utm_medium=organic&utm_source=froogle
Added by edit.
The good thing about this silicone case is it also fits the keyboard dock, given you're willing to do some cutting. So, I got 2 pieces, one covering the tablet and one covering the keyboard dock. I'll post a picture tomorrow as I'm too lazy now.
Iso, when you get it can you do a review side by side with the Sikai case and point out the differences and faults?

Case or No Case?

I took my device out of my Caseen case in order to do my downgrade/root...yes I know I didn't need to take it out, but I did.
I forgot how light and nice it is to have such a thin device. It got me thinking that I might not want to use a case that often. What do you think?
I'm a kind of a no case guy, but since it is my favorite expensive toy I'm going to try to keep it in the case as much as possible. The good thing about cases like the one you have, is that it is wonderful to use when you are on a flat surface, no need to hold the tablet or break your neck looking straight down.
I think the answer is both. For home use, I prefer not to have it in a case, enjoy the tablet for what it is. If you plan on taking it on a trip or to work, then put it in a case for that extra protection.
I plan on getting one of the ones posted in another thread where it holds both tablet and dock but other than that, no. I would but it would be annoying having it on and off to use the dock
The best case is the keyboard dock
Sent from my SGH-T989 using XDA
I just got the 300 and I'm loving it. I agree that the best case is the dock but it worries me that some people have posted about the screen getting cracked when docked. I wonder if this happens when you put the tab with the keyboard in a bag and pressure is applied to the screen. If you read the tf201 forums some users have attached rubber or silicone bumpers to the dock to spread the pressure along more points. As for me I'm going to add the silicone bumpers and leave it docked. My ideal case would be a snap on hard plastic case for the back of the tab and leave it docked so that the back is protected by the case and the screen by the dock. I have yet to see a snap on case for the 300
I'm thinking of buying the Roocase or the Poetic case and cutting off the case in half so I can then use the part that covers the back only and leave the tab docked. Not sure how it will look but its the only way I can think of getting what I want.
I don't like cases. I got a good bag to carry it around in. When it's in my hands I want it as light as possible. Ruins the comfort and functionality of having a tablet if you increase the weight with a case, IMO.
^^^^^yup
Il just get a carrying bag
Sent from my SGH-T989 using XDA
No.. no case! This light, thin tablet placed in ugly thick case..
Agree with Raul69.atl, best case is dock and just take care of device)
The main reason I get the case is to use it as a kickstand for watching movies or if i using at a table or desk. but i got one thats fairly easy to take out, so if I'm carrying it around the house, I take it out.
I ended up just encasing mine with Armorsuit gear and carrying it around like that. I much prefer it without the case. I would like a stand though. Any suggestions for a stand?
churraman said:
I just got the 300 and I'm loving it. I agree that the best case is the dock but it worries me that some people have posted about the screen getting cracked when docked. I wonder if this happens when you put the tab with the keyboard in a bag and pressure is applied to the screen. If you read the tf201 forums some users have attached rubber or silicone bumpers to the dock to spread the pressure along more points. As for me I'm going to add the silicone bumpers and leave it docked. My ideal case would be a snap on hard plastic case for the back of the tab and leave it docked so that the back is protected by the case and the screen by the dock. I have yet to see a snap on case for the 300
I'm thinking of buying the Roocase or the Poetic case and cutting off the case in half so I can then use the part that covers the back only and leave the tab docked. Not sure how it will look but its the only way I can think of getting what I want.
Click to expand...
Click to collapse
Yeah, there were some screen cracking issues with the Prime but that was a fault of a bad weight and pressure distribution when docked. If you compare the two docks side-by-side, you can tell that ASUS redesigned the TF300's so as not to have that problem. and as for a case I love sleeves. exactly like those laptop sleeves that lots of people get, but in 10" size. thats what I recommend.
Sent from my ASUS Transformer Pad TF300T
Case = Piece of mind for me since I am so clumsy. I also agree that it is good to use as a stand for movies and surfing.
I went back and fourth myself over this issue. What I ended up doing with my 7” HTC Evo View 4G tablet was to get a case that's just the plastic part of the 360° style case, without the big hole in the middle to rotate of course. It's lightweight yet protects the corners and back. I'm hoping that type of case will be available by the time my red TF gets here.
Sent from my Sprint Evo View 4G (PG41200) using Xparent Purple Tapatalk 2
With case! It's a €400,- device and would hate to get it broke or lots of scratches on it. But depends which kind of case because you got really thick ones which I think dont hold as good. The thin ones I think are better.
A advantage of a case (not all of them) is that you can use it as a stand for the tablet.
If you want to use it without a case but want to store it safely, why not use a 10" sleeve.
I just use a sleeve. Its easiest, and unless I get an otterbox like case this thing is gonna break if I drop it anyways. I just use sleeves and padding for when its in my bag
I love how sleek my TF300 is and I tried a couple of different cases but did not like the bulk they added. I agree that the keyboard dock is the best solution for docking and I bought one of those sleeves from Amazon and use it when i have to carry it around.
i just purchased a moko case and let me tell you. when i was on a plane flying back home from NTC, i wish i had done so sooner. lol
I actually went a few days without a case when i first got my Pad....i usually dont use a case for any devices as i am usually VERY careful with them. however, the Pad almost seemed to thin and light without a case and i was always very scared of dropping it. day 1, walking from my work to my car, i had a death grip on the thing...lol
needless to say, i got a case (moko slim multi-angle one off amazon for $15...well worth the $$ IMO) and it has been great. Gives that extra protection when i want it, a great multi-angle stand for watching videos or normal use (placed it on my lap and browsed with it last night) and it is actually fairly thin and light still. even without it on the "stand" it is easier to hold due to the grooves on the back.
it's so nice i may never take it out of the case again....especially since i have Tile floors throughout my entire house....lol
Sure glad I had a case on mine when my 2 year old threw it straight down onto the hard wood floor the other day! It's a Moko case.

I need a skin for my new ft300

browsed the net cant find anything. Is it to soon??
Iam looking for a full body skin made of silicon.
Armor suit has two right now
http://www.armorsuit.com/tablets-sc.../asus-tablets/asus-transformer-pad-tf300.html
I am also looking for a good armored back shell if that is what you mean?
I have one on my Galaxy Tab 7, it is a hard shell covered with silicon (like this one, mine was much cheaper if i recall right ). It fits tightly around the edges, can handle some drops, makes the tablet not much bigger in size and the tablet does not slip out of your hands easy and the screen never touches the surface if you lay it on a flat surface with screen down.
The nearest thing i can find at the moment is the one from Gumdrop. But I think it will make the tablet too bulky and the shipping costs to Europe are almost as expensive as the case itself.
The TF300 is fairly new, so it will take some time before factories start producing skins for our beloved tab.
I check eBay and Alibaba on a regularly basis and the only cases that i can find right now are leather ones.
I think in a month or two China will be flooding the world with affordable, good, sturdy, sleek and practical cases.
If i find one sooner then you i'll let this thread know.
Edit:
Ah now i read you want FULL body armor of silicon. Then I ony know of Gumdrop and Otterbox. The latter does not have a case for the TF300 yet.
Case of TF300
When can we take a group to buy the TF300 case ?
wont amor suit+ full body cover plus a folio case be enough for protection?

Soft Neoprene Sleeve Zip Case Cover 11.6 - 12.5"inch Chromebook Laptop Netbook

Soft Neoprene Sleeve Zip Case Cover 11.6 - 12.5"inch Chromebook Laptop Netbook Review
http://pages.ebay.com/link/?nav=item.view&id=131282464412&alt=web - 6.99GDP
I purchased this pouch from ebay as I needed something to keep my tablet in whilst I decided what permanent solution I was going to have. I chose red and black but there is different options available.
It came in a large envelope and was not folded. Last time I purchased something this size it was folded and left a nasty fold in the middle.
The pouch is of good quality and my tablet fits in comfortably. The zips feel strong and not like these cheap ones that split open and fall apart.
The pouch is strong enough to keep it free from scratches if you're transporting it in bags and briefcases, however it probably won't protect it from drops and knocks, especially dropping from height. It most certainly won't stop the screen shattering if something was to land on it.
The outside is a soft and smooth stretchy material and the inside is made of something similar except has a slight flocking to it to protect the case of the tablet and screen.
PROS: Cheap and quick solution to keeping your pride and joy safe, good quality, decent zips and materials
CONS: Won't protect from strong knocks and bumps.
I need one of those! Does this Note Pro 12.2 fit tight in there or is it loose? Thanks!
dja2k
It's not so tight as it's hard to close and it's not loose enough for it to move about. But what I have done is take the keyboard from my keyboard case combo and fit them both in the sleeve.
I think comfortable is the word.
Ah nice! Good to see more people using a sleeve Much more practical than a flipcover.
I've got a similar one, but it's from Samsonite, and it's for 13.3 laptops. This one's the one I've got: http://www.samsonite.co.uk/colorshi...13.3inch-dark-brown-turquoise/58130-2079.html
Also fits my keyboard and a ton of other stuff, pictures are in the Accessories thread.
Those aren't sold in the US though, so this is a great option for those who want one.
Sent From My Samsung Galaxy Note 3 N9005 Using Tapatalk
Do you think I can manage it to fit with one of these Fosmon DURA-FRO Ultra Slim Fit Case on it? Thanks!
dja2k
ShadowLea said:
Ah nice! Good to see more people using a sleeve Much more practical than a flipcover.
I've got a similar one, but it's from Samsonite, and it's for 13.3 laptops. This one's the one I've got: http://www.samsonite.co.uk/colorshi...13.3inch-dark-brown-turquoise/58130-2079.html
Also fits my keyboard and a ton of other stuff, pictures are in the Accessories thread.
Those aren't sold in the US though, so this is a great option for those who want one.
Sent From My Samsung Galaxy Note 3 N9005 Using Tapatalk
Click to expand...
Click to collapse
I am strangely attracted to that. I read in one of your previous reviews or accessories you have a messenger bag from the same people. But at £80 ish it's a pretty large investment. Fair enough ill be protecting my tablet, but will look about for a cheaper version first! But it's definitely on my wish list.
dja2k said:
Do you think I can manage it to fit with one of these Fosmon DURA-FRO Ultra Slim Fit Case on it? Thanks!
dja2k
Click to expand...
Click to collapse
I have something similar to this. It fits well on my tablet. I got mine on ebay for a couple of quid so if it didn't fit then I wouldn't have lost much. If you can take the plunge and write a review. I'm sure others would be interested in your opinion of it.
I have some ebay bucks coming my way on April 1st, so I am gonna hold of til then to order one of these. In the meanwhile I had gotten this one 11.6"/12.1" Black Neoprene Notebook Laptop Sleeve Bag Pouch which will have to do til then. Thanks!
dja2k

Categories

Resources