Hey!
A friend of mine has this new tablet - Coby Kyros Mid1060 - and ask me to install Gapps and what was missing...
The thing is... I accidentally renamed the 'boot proper' file original without copying the new one...
So, as you can imagine, i can't boot the tablet, it stucks on 'android' logo...
I've been searching for different ways to reach the file but i can't...
Before doing that renaming operation i managed to root the device and i can get to the recovery menu...
Is there a way to fix this problem?
I appreciate all your advices.
Thank you.
Same Problem
I'm having a very similar problem with that device.
I've deleted the build.prop file while trying to rename it.
Could anyone send me a copy of that file? I'm trying to replace it with an update.zip
Paulo Rodrigues
zecamanel said:
Hey!
A friend of mine has this new tablet - Coby Kyros Mid1060 - and ask me to install Gapps and what was missing...
The thing is... I accidentally renamed the 'boot proper' file original without copying the new one...
So, as you can imagine, i can't boot the tablet, it stucks on 'android' logo...
I've been searching for different ways to reach the file but i can't...
Before doing that renaming operation i managed to root the device and i can get to the recovery menu...
Is there a way to fix this problem?
I appreciate all your advices.
Thank you.
Click to expand...
Click to collapse
Hello.
I'm having the same problem ... Already have some solution?
This worked for me
I made the update.zip file that you could find in attach.
It replaces a build.prop file that will allow a factory reset.
The device will reboot again.
1. copy the file to an microSD
2. plug the microSD in the tablet
3. turn the device on in recovery mode ("volume down" and "on" )
4. select "apply update from sdcard"
5. select the "update-signed.zip" file
6. reboot you device
hope this helps
If you are stuck on the bootlogo, you can always edit/add/replace files in your device. No need for flashable zips.
Follow this
http://forum.xda-developers.com/showthread.php?t=2280206
Hit thanks if I helped
sent from GT-S7562 , with a better stock ROM
einst31n said:
If you are stuck on the bootlogo, you can always edit/add/replace files in your device. No need for flashable zips.
Follow this
http://forum.xda-developers.com/showthread.php?t=2280206
Hit thanks if I helped
sent from GT-S7562 , with a better stock ROM
Click to expand...
Click to collapse
My device wasn't detected by the computer... And there was no backup to recover...
A noobie thing.
Was it detected by android commander?
Hit thanks if I helped
sent from GT-S7562 , with a better stock ROM
einst31n said:
Was it detected by android commander?
Hit thanks if I helped
sent from GT-S7562 , with a better stock ROM
Click to expand...
Click to collapse
I don't know... Don't have it..., but I can tell you that the USB debugging was disabled.
android commander is not an app its a windows program. Try connectingyour device to your PC and check android commander. If you have an insecure kernel , you can access the root of your device and make any changes you want.
einst31n said:
android commander is not an app its a windows program. Try connectingyour device to your PC and check android commander. If you have an insecure kernel , you can access the root of your device and make any changes you want.
Click to expand...
Click to collapse
Thanks.
nevertheless what I did worked for me and is a practical way for people with less skills or knowledge to solve their problem.
With that in mind I posted it.
I tried lots of thins, including connecting the computer to the tablet... nothing worked, but this did. My tablet is working now.
Original rom?
Hi there, is this the original rom file for the MID1060? My tablet is having some problems with the positioning sensor and i need to send it back to warranty, but i've modified it so it can have googleappz on it and i can't restore. Do you think that wth this i can solve it?
pjfsfr said:
I made the update.zip file that you could find in attach.
It replaces a build.prop file that will allow a factory reset.
The device will reboot again.
1. copy the file to an microSD
2. plug the microSD in the tablet
3. turn the device on in recovery mode ("volume down" and "on" )
4. select "apply update from sdcard"
5. select the "update-signed.zip" file
6. reboot you device
hope this helps
Click to expand...
Click to collapse
Related
Hey everybody,
I apologize in advance if this post is a duplicate but I have tried searching for a solution and still lost. Here is what I did: I used the Odin to restore stock rom, then re-rooted using the one click method, then downloaded a rom from theunlockr.com, then used rommanger to install it. My rom has gave me no problems but now when I try to reboot into recovery to install something else(Like the 2.3 keyboard or a lagfix) i get this error:
E:Can't open /sdcard/update.zip
(No such file or directory)
Installation aborted
Can someone please help me? Thank you, BTW I have a Samsung Vibrant running axura-froyo-rom
I had the same problem too.
When I put update.zip at the root directory of internal memory... once I restart the phone (not get into the recovery mode), this file is missing / dissapear. So... I always got this message too :
E:Can't open /sdcard/update.zip
(No such file or directory)
Installation aborted
anybody can help us pleaseeeeee
I got my phone to factory settings using odin then i rerooted my phone and flashed the same custom rom back on and it worked. Try reflashing your phone, backup first, might work.
CarlosCruz15 said:
I got my phone to factory settings using odin then i rerooted my phone and flashed the same custom rom back on and it worked. Try reflashing your phone, backup first, might work.
Click to expand...
Click to collapse
thanks for reply.
how to use factory setting using odin ? tick the "re-partition" box ?
can you explain to us step by step please ?
I'm so frustated
Did you guys delete the update.zip after rooting?
If you do not see
sdcard/update.zip using a file manager, download the update.zip from my noob guide, move it to internal memory and then try to flash CWR.
Also, look in the bottom of the noob guide (last few posts) for a solution to a RECENT issue with CWR... I assume whatever Koush did in the last update is causing this problem? BUT, there is a fix posted by another XDA user... just a matte of downloading the file and putting it in the right place.
mikomikos said:
thanks for reply.
how to use factory setting using odin ? tick the "re-partition" box ?
can you explain to us step by step please ?
I'm so frustated
Click to expand...
Click to collapse
check out this link...its what i used
http://forum.xda-developers.com/showthread.php?t=734475
listen to s15's post....he knows what he is talking about. i followed his noob guide in his sticky and everythign worked perfectly! his vids are also very helpful. one thing i have found that works a lot as well is if you download ROM Manager from the market and then click on "fix permissions"... don't know if this would help in this situation but i have had that fix weird stuff.
s15274n said:
Did you guys delete the update.zip after rooting?
If you do not see
sdcard/update.zip using a file manager, download the update.zip from my noob guide, move it to internal memory and then try to flash CWR.
Also, look in the bottom of the noob guide (last few posts) for a solution to a RECENT issue with CWR... I assume whatever Koush did in the last update is causing this problem? BUT, there is a fix posted by another XDA user... just a matte of downloading the file and putting it in the right place.
Click to expand...
Click to collapse
yeah this, the update.zip is ESSENTIAL for your phone to run the clockwork recovery, it stores all the things needed, and when you click "reinstall packages" your system goes in update.zip and looks for what to boot up and finds CWR and boots that so you see that screen.
Don't delete it if you did.
i have tried numerous times to root,but cant seem to get update.zip file in right place,can anyone help? thanks. challenged noob!!
Rayn1328 said:
i have tried numerous times to root,but cant seem to get update.zip file in right place,can anyone help? thanks. challenged noob!!
Click to expand...
Click to collapse
When you usb into your phone it needs to be in the initial area of your sdcard.
You might have a bad update.zip file. Two things, verify the md5(if possible) from where you got it and check the properties and make sure it's not names update.zip.zip. The later is very common.
Try this method too btw, when I Odin back to stock I always use this one to root again. Follow the 'Automated Method' area.
http://forum.xda-developers.com/showthread.php?t=786877
you will need these drivers AND set your phone to debugging mode (settings/applications/development check USB debugging).
http://forum.xda-developers.com/showthread.php?t=728929
hey all,
Newbie here trying to flash a ROM, i am running into this same error, i have tried everything here and i have one question (might be a stupid question) but my root sd folder is called SD/, not SDCard/ ...is this a path error?
Please note it file must be in the internal card, not the SD card.
This step drove me nuts.
"2. Copy the update.zip (and the ROM) to the INTERNAL SD (not the external SD Card). sdcard/ " (http://forum.xda-developers.com/showthread.php?t=732458)
i ran into the same problem...how do i get from 3e to CWR?
here's what's shown in my vibrant directory: Android, DCIM, external_sd, LOST.DIR
i dont have an internal sd (the card) so it's not shown?
the path i got error on: /mnt/internal_sd/update.zip
1. when i tried to "reinstall packages" i keep getting the error that the update.zip file cant be found. should i create a folder for it or something? i think it's a matter of pathing but i cant find out the right place to put the file...(to get from 3e to CWR)
2. i see people suggesting boot with odin or sth like that...does that solve my problem and how do i do that?
janthe6th said:
i ran into the same problem...how do i get from 3e to CWR?
here's what's shown in my vibrant directory: Android, DCIM, external_sd, LOST.DIR
i dont have an internal sd (the card) so it's not shown?
the path i got error on: /mnt/internal_sd/update.zip
1. when i tried to "reinstall packages" i keep getting the error that the update.zip file cant be found. should i create a folder for it or something? i think it's a matter of pathing but i cant find out the right place to put the file...(to get from 3e to CWR)
2. i see people suggesting boot with odin or sth like that...does that solve my problem and how do i do that?
Click to expand...
Click to collapse
You definitely have an internal sd card. Use Astro file manager or something similar and put update.zip on the root of internal sd card, meaning not in a folder. It should look like sdcard/update.zip. If you are having the 3e mismatch recovery issue read this http://forum.xda-developers.com/showthread.php?t=833423
Sent from my SGH-T959 using Tapatalk 2
i go to the link that you linked and ran the script. then i download the update.zip file at the noob guide with a slimbean 4.2.2 rom and addons. this time i would just put it in the root folder (technically not in any folder). when i try to reinstall packages, the screen shows that it is "replacing stock recovery with clock work recovery"... but then it would go back to the 3e.
so...i guess putting the files in the root folder is correct. but someone it still wont let me get tot CWR...
janthe6th said:
i go to the link that you linked and ran the script. then i download the update.zip file at the noob guide with a slimbean 4.2.2 rom and addons. this time i would just put it in the root folder (technically not in any folder). when i try to reinstall packages, the screen shows that it is "replacing stock recovery with clock work recovery"... but then it would go back to the 3e.
so...i guess putting the files in the root folder is correct. but someone it still wont let me get tot CWR...
Click to expand...
Click to collapse
You have to reinstall packages twice for it to work properly. It is normal to not work the first time, just reinstall packages again and you should be good to go. If you keep having issues you should just flash back to stock 2.1 with Odin and go from there.
Sent from my SGH-T959 using Tapatalk 2
For all you Shotputterz heres the factory image we've been waiting for
assuming you have debug mode enabled, ADB and fastboot working properly
EDIT 1: REUP'D CWM mod
EDIT 2: reordered process to make more sense
Method:
1. Download the Beta CWM mod from rootzwikis credit to birdman EDIT:REUP'ED http://d-h.st/Fdp
2. Using fastboot, DO NOT FLASH Clockwork mod just use the syntax
"fastboot boot 'File path of clockwork mod image'
Note* this will boot directly into the recovery without permanently writing to the recovery and boot partition on the eMMC on the Nexus Qs board
3. Download the posted CWM factory backup posted
4. make the directory on the device and adb push the backup folder (unzipped) to /sdcard/clockworkmod/backup while in CWM recovery
*The device should show up in "adb devices" while in the CWM recovery*
5. *TEXT WILL BE REALLY SMALL! Now navigate with the Scroll wheel to backups and restore and tap the mute button to select.
*IF SOMETHING IS SELECTED IN ERROR THERE IS NO BACK BUTTON JUST REBOOT AND REDO FASTBOOT BOOT*
6. Now select restore and select the image folder
7.blah blah CWM Freaking MAGIC
8. Your Q is back to factory state
If someone wants to PM me or show me how to package this in a nicer CWM zip to install with a script let me know
http://d-h.st/yeo
*Note* I am NOT responsible if you brick your already bricked Nexus Q*
You sir get a beer, since my 2nd (dev) Q won't arrive until later this week, and mine was a shot put until this post.
If you happen to be in NYC before I move to SF, you get three beers.
Hoppy ones.
I am moving to SF
Did the reflash go smoothly?
fiveipads said:
I am moving to SF
Did the reflash go smoothly?
Click to expand...
Click to collapse
No unfortunately it didn't--I blew away all partitions other than bootloader so I can't, to my knowledge at least, push the zip since I can't adb.
I've got factory recovery, boot, system imgs but the system img won't push out because of fastboot's apparent inability to handle files that large (1GB exactly I believe).
...I guess I have to patiently await my second Q but the point of having two was to *use* one and have one for dev... rather than have one as a heavy reminder of my overzealous endeavors...
Hopefully I can give it more time while on this SF trip...
Boot into the cwm bootloader with fastboot without flashing. Adb will be enabled and you can push files the files while your in adb recovery. Try that and flash it.
Sent from my SPH-D710 using xda app-developers app
Does our Q's have internal memory.. if not wouldn't it be possible to run back up of off otg memory stick if recovery would support it
Sent from my Galaxy Nexus using xda premium
fiveipads said:
Boot into the cwm bootloader with fastboot without flashing. Adb will be enabled and you can push files the files while your in adb recovery. Try that and flash it.
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
The problem I'm having is that ADB is not responding from CWM... at least not on a Windows machine. The drivers are fine as ADB was working in normal mode before my issue sprung up.
EDIT: As suspected Virtual Ubuntu on a Win host didn't see the device, Physical Ubuntu had no issue. NQ reloaded.
fiveipads said:
Boot into the cwm bootloader with fastboot without flashing. Adb will be enabled and you can push files the files while your in adb recovery. Try that and flash it.
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
Can we do this by say pushing the file to the download folder and then installing from zip?
And i know slightly off topic but once we've installed some apks for example, what's currently the best interface to use to navigate through the apps and use them?
How do I make a directory on Nexus Q
fiveipads said:
For all you Shotputterz heres the factory image we've been waiting for
assuming you have debug mode enabled, ADB and fastboot working properly
Method:
1. Download the posted CWM factory backup posted
2. make the directory on the device and adb push the backup folder (unzipped) to /sdcard/clockworkmod/backup
http://d-h.st/yeo
Click to expand...
Click to collapse
In step 2 you say make a directory for the file that is posted below. How do I create a directory on the Nexus Q? Currently my Q is stuck in a bootloop after trying to launch CWM from a Galaxy Nexus. If you could post command codes that would be awesome!
I figured it out. You can just follow step #4 and in CWM you can push the CWM Factory img to the /sdcard/Download/ folder and use CWM to unzip and launch.
Could someone please provide me the beta cwm image for Nexus Q? The links are all circular and point to
http://goo.im/devs/birdman/CWM-steelhead-beta.img
Which is dead...
discoltk said:
Could someone please provide me the beta cwm image for Nexus Q? The links are all circular and point to
http://goo.im/devs/birdman/CWM-steelhead-beta.img
Which is dead...
Click to expand...
Click to collapse
I've been trying to get ahold of this image too! Anyone?? anyone?? Bueller???
WildSatchmo said:
I've been trying to get ahold of this image too! Anyone?? anyone?? Bueller???
Click to expand...
Click to collapse
Me as well...not sure why I got this damn thing...lol
The edit didn't prompt an email to me even though I'm following the thread, so those of you looking for the clockworkmod beta image please take note that OP was kind enough to provide a working link to the image.
Thanks fiveipads!
Can someone post full backup please?
caioketo said:
Can someone post full backup please?
Click to expand...
Click to collapse
The link at the bottom still works for me...
http://d-h.st/yeo
..
ok this is really bothering me, i've restored with this factory image several times, and I have to do it again right now and I cannot seem to push this file folder to /sdcard/clockworkmod/backup
what am i doing wrong..
it should be:
adb push NexusQFactoryImage /sdcard/clockworkmod/backup/ (assuming the file is in same folder as adb which it is)
that's it right.... the extracted folder contents in a folder.. not the zip.. so i dont understand why this is not working. Everytime I go to CWM and try to restore it tells me nothing to restore...
what really bothers me is that i've done this a hundred times, and never had this problem..
UKROB86 said:
ok this is really bothering me, i've restored with this factory image several times, and I have to do it again right now and I cannot seem to push this file folder to /sdcard/clockworkmod/backup
what am i doing wrong..
it should be:
adb push NexusQFactoryImage /sdcard/clockworkmod/backup/ (assuming the file is in same folder as adb which it is)
that's it right.... the extracted folder contents in a folder.. not the zip.. so i dont understand why this is not working. Everytime I go to CWM and try to restore it tells me nothing to restore...
what really bothers me is that i've done this a hundred times, and never had this problem..
Click to expand...
Click to collapse
BUMP.. stuck in CWM unable to get a restorable file.. no idea why...
Download OneClickRestore (it's the factory image straight from Google with the needed fastboot files included)
Extract zip to OneClickRestore
Unplug Nexus Q
Plug in Nexus Q and place hand on it til the leds turn red then remove hand
Launch "flash-all.bat" from the OneClickRestore folder
You may need to do a full reset, it's hit or miss
Another option is push & flash (Nexus Q)uantum Singularity Project RTS ROM from CWM and again may need to hard reset.
RTS is
Based on stock 4.0.4 build IAN67K
Deodexed
Zip aligned
init.d Support
bash support
Busybox updated
Prerooted
Superuser
Updated Keymap (Home=Home, End=Back, Delete=Menu, Insert=Visualizer)
Lokifish Marz said:
Download OneClickRestore (it's the factory image straight from Google with the needed fastboot files included)
Extract zip to OneClickRestore
Unplug Nexus Q
Plug in Nexus Q and place hand on it til the leds turn red then remove hand
Launch "flash-all.bat" from the OneClickRestore folder
You may need to do a full reset, it's hit or miss
Another option is push & flash (Nexus Q)uantum Singularity Project RTS ROM from CWM and again may need to hard reset.
RTS is
Based on stock 4.0.4 build IAN67K
Deodexed
Zip aligned
init.d Support
bash support
Busybox updated
Prerooted
Superuser
Updated Keymap (Home=Home, End=Back, Delete=Menu, Insert=Visualizer)
Click to expand...
Click to collapse
The problem with putting Quantum singularity project on is that I can't turn on ADB debug, because i use a bluetooth mouse and keyboard, don't have an OTG mouse/keyboard, so somehow I need to be able to connect with adb to setup a bluetooth connected mouse/keyboard
I was thinking to install stock image, and then without wiping install Quantum SIngularity Project over top to preserve the settings for usb debug, on.
what's confusing to me is that i've restored the stock image many times before, and never had a problem.. that's why im wondering what the problem is.. if im typing something wrong.
I used the OneClickRestore as you said, and im just booting it up now
EDIT: didn't get past boot logo, i'll try again
So just to confirm this OneClickRestore is loading the stock nexus Q img right? I've never used it before I usually manually do it
EDIT: still stuck at the nexus q logo before home screen
do you see any error in my commands of trying to push the stock img folder (original post) to "/sdcard/clockworkmod/backup" ? I've done it many times before never had a problem
Hi folks
I hope I am not breaking any rules. I tried my best to read up on the problem and see if it's already been fixed. So far I haven't encountered anything which is specific to my needs, but I learned enough to pose a well-formed question.
Phone: Samsung Galaxy SIII International (GT-I9300)
ROM: Stock Samsung, version 4.1.2, the update with Multi-window. Do not have the exact build number unfortunately.
Root status: Rooted
Recovery: Stock recovery. (I JUST rooted the phone, nothing else.)
So the problem is:
1. I used ES File Explorer in root mode, mounted /system as writable, and made an edit to build.prop (added "qemu.hw.mainkeys=0" to the end of the file to enable navbar) and saved the file. I rebooted the phone and now it is stuck with a looping Samsung logo.
2. I have made a backup of build.prop and placed it in /sdcard/ but unfortunately I haven't made a copy on my PC. Also note that I don't have an external SD card, I am using the 16GB space that came with the phone. So the build.prop backup is on the phone.
3. I do not have a USB cable (I have one that has a loose connection somewhere and my phone is not detected 99% of the times I've used that cable)
What I have found after 2 hours of searching online:
1. Factory Reset through recovery (I am able to boot into stock recovery by doing Vol Up + Home + Power) will not restore /system partition so that won't fix this.
2. ES File Explorer might have messed up the file permissions of the build.prop file.
3. I can use PC ODIN to flash the stock firmware (I might lose data but at least the phone would be back to normal).
4. I can use adb to push a good build.prop file and set the correct permissions (my most fav. set of instructions are from here: http://forum.xda-developers.com/showthread.php?t=1660596 Of course I got the idea from several other threads)
5. I can sideload a good build.prop file that someone might be generous to provide me using adb.
I don't have a data cable, so you can see how that Might be a problem. What I DO have is a USB OTG cable and a pen drive. Now, in the stock recovery, I noticed an option "apply update from external storage". Assuming I have an update.zip with the proper build.prop in it, can I load the update.zip into a usb pen drive (formatted to fat32)? Does "apply update" here work for such zip files or is it only meant to be used for full firmware images? If so, can I just download the latest stock firmware and apply it from here without wiping the /data partition?
If I can get this resolved tonight I can get my phone up and running before tomorrow's work week. I will buy an USB cable ASAP (it's 12 AM here so going out to get it is not an option now). But even if I do, I still have 5 months worth warranty left and I'd like to stick with the stock recovery and avoid incrementing the flash counter altogether, despite Triangle Away.
Thank you very much for the help in advance.
Adb pull your backup» then push it back?
slaphead20 said:
Adb pull your backup» then push it back?
Click to expand...
Click to collapse
I don't have a working data cable, so I cannot connect to the PC. That was my first idea, though, thanks! I am currently reading about making an Update.zip. It's very unfortunate that I didn't note my firmware details after the OTA...
Just set permissions - use Properties in ES FE in root mode. RW. R.. R.. should work.
LenAsh said:
Just set permissions - use Properties in ES FE in root mode. RW. R.. R.. should work. If not try 777 for giggles.
Click to expand...
Click to collapse
I am unable to boot into the phone, it is stuck in a bootloop
I don't have a USB cable to use ADB. I don't even have a custom recovery. All I have is the stock recovery and the option to "apply update from external storage". I now remembered that I also have an SD card on which I can put an update.zip or the stock firmware. Unfortunately I didn't note down the firmware details after the last OTA from 4.1.1 to 4.1.2, so I don't know which one to download.
Can I use the option "apply update from external storage" to flash an update.zip or is that only meant for full firmwares? Thanks!
Oops - silly me.
You are running stock recovery - never use it but does it have a fix permissions option?
Failing that you may have to reflash the ROM. Stock recovery is very restrictive on what you can flash.
LenAsh said:
Oops - silly me.
You are running stock recovery - never use it but does it have a fix permissions option?
Failing that you may have to reflash the ROM. Stock recovery is very restrictive on what you can flash.
Click to expand...
Click to collapse
Fix permission option on the stock recovery? I don't think so, haven't been able to find it. Here are the options I have:
reboot system now
apply update from adb
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
Interestingly, when I selected the last option, it had these 3 folders:
fota/
lost+found/
recovery/
I was hoping fota/ had the files from my last OTA update but nope.
I guess you are not sure whether I can flash an update.zip through stock recovery... so I just have to wait till I get my USB cable and try out some adb magic?
EDIT: I'm retiring for the day. Thanks for the suggestions @LenAsh and @slaphead20. I'm gonna buy a cable next week and try to set the permission to 644 (RW-R-R) using this thread as my reference (http://forum.xda-developers.com/showthread.php?t=1660596). Thanks for your suggestions, I will post back when this is all resolved.
In the meanwhile, please keep the ideas coming
PS: Oh wait, I am still curious. What is the worst thing that could happen if I try to flash an update.zip through stock recovery? I am very curious to see if it will work.
You could flash a later custom recovery (this one works well http://forum.xda-developers.com/showthread.php?t=2002953) via Odin and then fix permissions that way. Even if that doesn't work, you could then flash anything you like without having issues that the stock recovery presents.
EDit: still need a cable though...
Trouble is he hasn't got a cable, I had same thinking, that he could use the aroma file manager in philz but he's stuffed without a cable!
Possible to make an update.zip with just the build.prop in it. Copy it to a memory card and use recovery to flash it?
I would try that first.
Edit: i just remembered i have done that a few times with my htc desire. Was running clockwork mod though.
Its really easy, find a small flashable mod in zip format and delete all the mod files and copy your build prop in. Edit the updater script to just write your /system/build.prop.
Copy the zip to you mem card. Use a usb adapter in a pc, stick it in your phone and use recovery to flash from external sd.
And after typing all that i reread your post and your running stock recovery and i think you would need a signature or something on the zip so it would not work. Ooops.
Sent from my GT-I9300 using xda premium
Stock recovery won't let you flash anything much... so perhaps his only option is Odin. When he has a cable.
On a side-note, how can someone not have a USB cable of any kind kicking around??
LenAsh said:
Stock recovery won't let you flash anything much... so perhaps his only option is Odin. When he has a cable.
On a side-note, how can someone not have a USB cable of any kind kicking around??
Click to expand...
Click to collapse
Just edited my post
Sent from my GT-I9300 using xda premium
@LenAsh, @slaphead20, @ficti0n851
Hehe, yeah, I'm stuffed without a cable I lost it recently and I'm the only one with a recent phone. All my family members' phones use different cables.
Anyway, I managed to borrow a friend's cable and am currently downloading drivers for the S3. Once that's done I will use ADB to set the file permission and try rebooting my phone, failing which I will restore the backup build.prop, set permissions and reboot the phone. Failing which... well, maybe I'll reflash the stock firmware (I managed to find out the exact build details btw! )
I'll keep you posted, thanks for taking the time guys
--
EDIT:
ADB was a success! I got in and changed the permission to 644 and rebooted, done! Funny thing was that /system/build.prop file was not even there, there was only /system/build.prop.bak. I was not able to find my original backup on the sd card, but I copied the .bak file (probably generated by ES FE) and set its permissions and that worked. And now I have also have the software keys!
Thanks for your comments guys. This was fun!
----
EDIT 2:
For anybody else who has the same problem, I did it using the commands in these great ADB guides:
http://forum.xda-developers.com/showthread.php?t=1660596
and
http://forum.xda-developers.com/showthread.php?t=879701
Also, how do I edit the title of the topic? Want to add a [Solved] tag.
ficti0n851 said:
Possible to make an update.zip with just the build.prop in it. Copy it to a memory card and use recovery to flash it?
I would try that first.
Edit: i just remembered i have done that a few times with my htc desire. Was running clockwork mod though.
Its really easy, find a small flashable mod in zip format and delete all the mod files and copy your build prop in. Edit the updater script to just write your /system/build.prop.
Copy the zip to you mem card. Use a usb adapter in a pc, stick it in your phone and use recovery to flash from external sd.
And after typing all that i reread your post and your running stock recovery and i think you would need a signature or something on the zip so it would not work. Ooops.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Hey, I know this post is from forever ago, but is there a chance you could explain this step by step for a noob?
I have got my phone stuck in a bootloop by fiddling with build.prop, and I have the original file before playing with it. I have a rooted device with custom recovery, so how I could I use minimal ADB to push the original build.prop located on my device (sdcard) to root/system??
---------- Post added at 11:11 PM ---------- Previous post was at 11:06 PM ----------
gautham_y said:
@LenAsh, @slaphead20, @ficti0n851
Hehe, yeah, I'm stuffed without a cable I lost it recently and I'm the only one with a recent phone. All my family members' phones use different cables.
Anyway, I managed to borrow a friend's cable and am currently downloading drivers for the S3. Once that's done I will use ADB to set the file permission and try rebooting my phone, failing which I will restore the backup build.prop, set permissions and reboot the phone. Failing which... well, maybe I'll reflash the stock firmware (I managed to find out the exact build details btw! )
I'll keep you posted, thanks for taking the time guys
--
EDIT:
ADB was a success! I got in and changed the permission to 644 and rebooted, done! Funny thing was that /system/build.prop file was not even there, there was only /system/build.prop.bak. I was not able to find my original backup on the sd card, but I copied the .bak file (probably generated by ES FE) and set its permissions and that worked. And now I have also have the software keys!
Thanks for your comments guys. This was fun!
----
EDIT 2:
For anybody else who has the same problem, I did it using the commands in these great ADB guides:
http://forum.xda-developers.com/showthread.php?t=1660596
and
http://forum.xda-developers.com/showthread.php?t=879701
Also, how do I edit the title of the topic? Want to add a [Solved] tag.
Click to expand...
Click to collapse
Bro, I got the same problem as you had, except that I have a custom recovery, and the original build.prop file, and a USB cable, but I still haven't figured out what to do completly. Can you please take a minute to explain this for a complete noob? You have probably forgot all about this, but I am shooting for this chance. :/
black_hawk1990 said:
Hey, I know this post is from forever ago, but is there a chance you could explain this step by step for a noob?
I have got my phone stuck in a bootloop by fiddling with build.prop, and I have the original file before playing with it. I have a rooted device with custom recovery, so how I could I use minimal ADB to push the original build.prop located on my device (sdcard) to root/system??
---------- Post added at 11:11 PM ---------- Previous post was at 11:06 PM ----------
Bro, I got the same problem as you had, except that I have a custom recovery, and the original build.prop file, and a USB cable, but I still haven't figured out what to do completly. Can you please take a minute to explain this for a complete noob? You have probably forgot all about this, but I am shooting for this chance. :/
Click to expand...
Click to collapse
Hey, are you still having problems or did you solve it yourself? Anyway... If you still don't know what to do, describe best what you did to end up in a bootloop. As far as I understand what your problem is, you should use your recovery to move the backup of the original build.prop file to the system folder.
I changed my phones build.prop and when rebooted it does not started and ended up in bootloop and when I searched for how to fix this problem it showed that clear all the data from the phone but nothing happened and when I tried to install custom ROM in my phone my pc is not detecteing my phone .so what should i do ?
@Rajsh90: pull out battery for some minutes, put it in, reboot into downloadmode. Connect with PC, start Odin and hope that a COM-flag colours. Flash latest firmware.
my phone is
gionee Gpad_G2
help any expert. how cwm rom installation in my sdcard. i research in Google. and i read someone page i was trying to open this. recovery. img with mtk tool clockwork. mod but my mehod was wrong? here is no show. my recovery. option. only. for normal phone switch off. and on. it is work but recovery. not showing. i have no pc how to solve this problem without pc any help me pleace?
There are two easy ways:
1st Method
1. Install a app named ROOT MANAGER from play store (PLEASE NOTE THIS IS FOR ROOTED DEVICE ONLY)
2. If you have already rooted, after installing that app it will ask to install a custom recovery ie. CMW (ClockworkMod Recovery)
3. Before selecting CMW, ROM manager app will ask your device model select accurately and proceed to Download CMW and install it. It will ask for a reboot
4. You are Done
2nd Method: (You must have a Computer)
1. Try to Download the zip file of CMW of your device (zip file differs for device to device, So choose carefully your model)
2. Extract that zip
3. Go to Download mode (Power+ Volume down)
4. Install Software named ODIN v1.85
5. Open Odin and Connect your device to computer.
6. Flash the extracted file using Odin.
7. Done mate :thumbup:
itsmepawan said:
There are two easy ways:
1st Method
1. Install a app named ROOT MANAGER from play store (PLEASE NOTE THIS IS FOR ROOTED DEVICE ONLY)
2. If you have already rooted, after installing that app it will ask to install a custom recovery ie. CMW (ClockworkMod Recovery)
3. Before selecting CMW, ROM manager app will ask your device model select accurately and proceed to Download CMW and install it. It will ask for a reboot
4. You are Done
2nd Method: (You must have a Computer)
1. Try to Download the zip file of CMW of your device (zip file differs for device to device, So choose carefully your model)
2. Extract that zip
3. Go to Download mode (Power+ Volume down)
4. Install Software named ODIN v1.85
5. Open Odin and Connect your device to computer.
6. Flash the extracted file using Odin.
7. Done mate :thumbup:
Click to expand...
Click to collapse
there is no app called root manager it is rom manager and rom manager installs cwm only for a supported no of devices so you cant have cwm with rom manager on all phones
for the question you can try mediate cwm as it is a mediate processor phone search in xda
sangalaxy said:
there is no app called root manager it is rom manager and rom manager installs cwm only for a supported no of devices so you cant have cwm with rom manager on all phones
for the question you can try mediate cwm as it is a mediate processor phone search in xda
Click to expand...
Click to collapse
Hey sorry mate, I typed ROM MANAGER as a ROOT MANAGER in hurry.
Edit: Sorry for the mistake.
sir my device not show . rom manager. recovery. i select all devices. there which 1 model choose i confuse?
ommand: "/sbin/recovery" I:Checking for extendedcommand...I:Running extendedcommand...Waiting for SD Card to mount (20s)I:using /data/media, no /sdcard found.SD Card mounted...Verifying SD Card marker...SD Card marker not found...533aff7cfafd5547595aef04ad035cc1Error processing ROM Manager script. Please verify that you are performing thebackup, restore, or ROM installation fromROM Manager v4.4.0.0 or higher.I:using /data/media, no /sdcard found./tmp/recovery.log was copied to /sdcard/clockworkmod/recovery.log. Please open ROM Manager to report the issue.. help me how. solve this problem without pc
.
.
abhilaab said:
Click to expand...
Click to collapse
I don't think that files are for your phone hence it will not work correctly
bro help help please. i try. of recovery.imgfind it G610s-u00-CWMrecovery-0715.imgworked to 1 problem that. 1st . Chinese language. in. but . 2nd i try. rom manager.find one device huwai transformer recovery flash.v5.8.2.0 installing zipthere. is. English. language. recovery. with clockwork. mod show. 1st. and 2nd.to missed problem.
. /data/media, no/sdcard found./tmp/recovery.log was copied to /sdcard/clockworkmod/recovery.log. i find recovery.log. dir/root data/media clockwork. but. file not correctly. any expert. where is currently sdcard file how. found this file
abhilaab said:
bro help help please. i try. of recovery.imgfind it G610s-u00-CWMrecovery-0715.imgworked to 1 problem that. 1st . Chinese language. in. but . 2nd i try. rom manager.find one device huwai transformer recovery flash.v5.8.2.0 installing zipthere. is. English. language. recovery. with clockwork. mod show. 1st. and 2nd.to missed problem.
. /data/media, no/sdcard found./tmp/recovery.log was copied to /sdcard/clockworkmod/recovery.log. i find recovery.log. dir/root data/media clockwork. but. file not correctly. any expert. where is currently sdcard file how. found this file
Click to expand...
Click to collapse
no offence but I don't understand what you said please be clear
try google translate my friend
sangalaxy said:
no offence but I don't understand what you said please be clear
try google translate my friend
Click to expand...
Click to collapse
bro my handset is= gionee Gpad_G2.
i try
cwm rom installation in my sdcard. i research recovery options in. Google. and i read one 2 10 pages. i open mtk uncle tool and i update. choosing (model 610s uoo) Chinese recovery.img i there is bootloader in Chinese language. show.
my real English bootloader no show
and zip files . not installing. ? e can't amount? i founded recovery.log nothing correctly
. and
sdcard file. where is no idea? so help me. please.!
abhilaab said:
bro my handset is= gionee Gpad_G2.
i try
cwm rom installation in my sdcard. i research recovery options in. Google. and i read one 2 10 pages. i open mtk uncle tool and i update. choosing (model 610s uoo) Chinese recovery.img i there is bootloader in Chinese language. show.
my real English bootloader no show
and zip files . not installing. ? e can't amount? i founded recovery.log nothing correctly
. and
sdcard file. where is no idea? so help me. please.!
Click to expand...
Click to collapse
Dont get mad friend with out any correct .img you cant flash your phone it will not succeed i think thats what happened in your case
Gionee is a china brand and it is a common problem with the chinese that you cant get any original firmware
---------- Post added at 10:41 PM ---------- Previous post was at 10:40 PM ----------
abhilaab said:
bro my handset is= gionee Gpad_G2.
i try
cwm rom installation in my sdcard. i research recovery options in. Google. and i read one 2 10 pages. i open mtk uncle tool and i update. choosing (model 610s uoo) Chinese recovery.img i there is bootloader in Chinese language. show.
my real English bootloader no show
and zip files . not installing. ? e can't amount? i founded recovery.log nothing correctly
. and
sdcard file. where is no idea? so help me. please.!
Click to expand...
Click to collapse
Dont get mad friend you have to find the correct img file without it it will not succeed
how found and my old original. boot .img. ya how bekup English language.
abhilaab said:
how found and my old original. boot .img. ya how bekup English language.
Click to expand...
Click to collapse
It is the problem with the china you cant get any original firmware for your phones anyway try google may be you can find something
any help me please
help me
Little help Please
Greetings,
I am trying to root my Galaxy Exhibit 2, I have copied the cwm mod zip file to my sd card, but when i boot into recovery mode i cant see the file.
I can see it from files on the phone and when im attached to my pc. What is the noob doing wrong?
Any clues would be greatly appreciated.
Hello
here i am posting here because i cant post on Miscellaneous Android Development , how ever i think i post there before while working on B5512
I Just got new G700 it came with B115 middle east channel , phone is good but as a start is there is a update i must ask my self is root ready , and CWM for sure so i start the digging
@chamaruco thank you for your great thread which saved and helped many people
now i got a file and i think you were looking for it ""G700-U10_V100R001C00B124CUSTC432D001_Firmware_Portugal_Channel-Others_4.2.1_EMUI 1.8_05021LMW.zip"" it contain usb upgrade and sd upgrade with drv and flash tool
i notice EMUI 1.8 not 1.6 which i saw for example a permission manager with it on P6 is that here in that rom too ?
is that rom improved than mine b115 phone is good for first look but
(in B115)
1-camera quality is strange i dont mean bad but it look very strange it is like very poor on quality
2-in call volume is too low in my opinion all " in test mode"
Question now did any one get that update "EMUI 1.8 B124" can tell is there is any improvements ?!
Question am i able to flash CWM image directly with flash tool to save some annoying procedures ?!
a member here provide flasher and cwm.img and orginal recovery.img
i did not work with the phone yet need to shift data from old phone remove ext2 part and prepare for change , and feeling lost here
want to strike it all once
i will upload "EMUI 1.8 B124" soon as it came from a private server
any suggestions are welcome
When you install 1.8 you will notice there is only a tap error from uploader..it is a 1.6 emui. That's all.
Hello
some info to add
incase of softbrick the phone and unable to flash using spflash tool and receive " not allowed , forbidden "
solution
inside the usb upgrade >> flash "Rework-Secro" using scatter in same folder then you will be able to use download mode again
how to install this firmware i.e. B124 on G700-10
chamaruco said:
When you install 1.8 you will notice there is only a tap error from uploader..it is a 1.6 emui. That's all.
Click to expand...
Click to collapse
chamaruco; Thanks for the best of the best user guides you have been making for all of us, but what i want to know is to be able to install the B124 into my phone i.e. G700-10, i have rooted my phone using farmaroot, made a back up of my factory shipped OS and make all my data backup safe through Hisuit, have downloaded the firmware B124 Purtogal version, extracted the zip, (it is now carrying META-INF, boot.img, cust.img, logo.bin, sdload.log, system.img) i have made a folder in my SD card named dload and copied the files in it, uninstalled mobileuncle, reinstalled new mobileuncletool, copied my backuped recovery.img into my SDcard and somehow installed the recovery in to my mobile,
now please show me the way forward, what i need to do and how, please step by step if you kindly can. please.
YOU ARE THE BEST CHAMARUCO
talvigi said:
chamaruco; Thanks for the best of the best user guides you have been making for all of us, but what i want to know is to be able to install the B124 into my phone i.e. G700-10, i have rooted my phone using farmaroot, made a back up of my factory shipped OS and make all my data backup safe through Hisuit, have downloaded the firmware B124 Purtogal version, extracted the zip, (it is now carrying META-INF, boot.img, cust.img, logo.bin, sdload.log, system.img) i have made a folder in my SD card named dload and copied the files in it, uninstalled mobileuncle, reinstalled new mobileuncletool, copied my backuped recovery.img into my SDcard and somehow installed the recovery in to my mobile,
now please show me the way forward, what i need to do and how, please step by step if you kindly can. please.
YOU ARE THE BEST CHAMARUCO
Click to expand...
Click to collapse
Dload inside put update.app file, restart in updatemode
chamaruco said:
Dload inside put update.app file, restart in updatemode
Click to expand...
Click to collapse
But my mobile does not boot into CWM recovery mode as i have seen in my previous Qmobile A8 it always restarts in the defualt recovery mode which only give options to "1. reboot, 2. update from SDcard, 3. update from cashe, 4. wipe/delete user data and wipe/delete cache and in the last there is a calibarate TP, AND OFF COURSE THESE ALL ARE THE ANDROID BUILTIN RECOVERY STEPS NOT OF THE CWM
And off course there is not any file or folder named update.app in the downloaded .zip/extracted file. "as i have mentioned above the folder contains a folder named META-INF and three img files named as boot cust and system while a .bin file named logo too.
THANKS FOR YOUR TIME AND HELP.
foffa said:
Hello
some info to add
incase of softbrick the phone and unable to flash using spflash tool and receive " not allowed , forbidden "
solution
inside the usb upgrade >> flash "Rework-Secro" using scatter in same folder then you will be able to use download mode again
Click to expand...
Click to collapse
So after I select the Reworked scatter file there is only the sec_ro partition checked to flash. So after flashing it do I now select the previous scatter file and then flash everything (including preloader)?