Hi,
This is my first post here, please excuse if i'm not right.
But i'm kinda glad to join that nice community.
Basically, i do own a SE Xperia X10 mini which i'd like to push another ROM into.
Followed the instructions there .
Could install this kernel as soon as I've installed it using flastool (latest version) i go into CWM and could install the JB Mini ROM (also did a full wipe etc before) but after install got a loopboot.
Actually I've recovered the phone using SEUS so i'm on the official stock ROM again.
Here're the info:
Model number : E10I
Firmware : 2.1update1
Baseband : M76XX-TSNCJOLYM-53404006
Kernel : [email protected] #1
Build : 2.0.A.0.504
Should i Update the baseband so that the 2.6.23.60-nAa matches it ?
Should i unlock the bootloader first before following the instructions on JB Mini Project 4.1 (link above).
Thanks by advance
Nervmind guys got it working after updated baseband using an official SE ROM from a different country then updated to 016 using SEUS.
Thanks for help provided in forums
Related
To all the developers and members of XDA,
I bought an X10mini and found out that the firmware version is 2.1.1.A.0.16 , can i flash it to MiniCM6 2.2 ROM ? the baseband is M76XX-TSNCJOLYM-53404015 but the firmware is not 2.1.1.A.0.6..
I tried to to reinstall the ROM using PC companion and the version that i get is still 0.16 and not 0.6 .
I wonder if anyone here have the version same as mine and can i flash it to custom ROM ? i search throughout the treads and did not found any 2.1.1.A.0.16 available, is this the latest version or because the version is differ because of countries?
Any helps will be well-appreciated, thanks !
This is because you have the 2011 X10 Mini. Everything should work normally.
You have a previous FW, if you want to flash without fear, flash to the new FW and them flash it to MiniCM6 2.2 ROM.
You can use WotanClient, sign in the site of the program, it is free, and very easy flash with this program, and you can downgrade or upgrade your phone.
ok, Thank you for the information !
the important things are baseband and kernel, because when you upgrade to 2.2 or 2.3 the stock firmware will be replaced.
but before flashing with any rom kindly make a backup
Resolved: the link in the Edit worked (the 2nd time, first time it just kept looping the Sony Ericson logo over and over so I reflashed).
Edit: Maybe nevermind, trying http://forum.xda-developers.com/showthread.php?t=1192152 now.
Just picked up this phone from a friend. It had some unknown custom rom of 2.1 on it.
I followed the guide in http://forum.xda-developers.com/showthread.php?t=928343
Downloaded and installed Flash Tool
Downloaded and put X10a_GB2.3.3_AT&T_USA.ftf in the firmwares folder and followed the instructions and flashed the phone.
Upon restart I noticed I had 1.6 and not 2.3.3
I ran the official update from the PC Companion and it put it up to 2.1 and is now showing No Update Available.
Can anybody tell me what I did wrong? the 2.3.3 rom is the only rom i downloaded so i know i didn't just flash the wrong one.
I'm showing
Model number: X10a
Firmware version: 2.1-update1
Baseband version 2.1.65
Kernel version: 2.6.29 [email protected] #1
Build number: 2.1.A.0.492
The reason I'm wanting to upgrade is to meet the requirements to install http://forum.xda-developers.com/showthread.php?t=1238402
Any help?
1st step
download rom http://forum.xda-developers.com/showthread.php?t=1238402
7.03 baseband 2.1.67 or less
7.10 baseband 2.1.71 or more
download flashtool http://forum.xda-developers.com/showthread.php?t=928343
if 2.1/2.2
1) help > check driver
2) [Root] then rebot
3) [ask root prems]
4) [xRecovery]
after that rebot, press the back bottom, enjoi it
Hi guys,
I have a Xperia Mini Pro with this configuration...
Model: U20i
Firmware: 2.1-update1
Baseband: M76XX-TSNCJOLYM-53404006
kernel: 2.6.29
I'm still a noob at installing new versions of Android.
Can anyone tell me how i update the Baseband to M76XX-TSNCJOLYM-53404015?
I already have it rooted, i just can't install modified androids because of this baseband!
Thanks! Any help is welcome!
You need to update the phone using the SEUS app. This will upgrade your baseband but will also wipe any existing mods & data.
Simply Run the SEUS program and follow the intructions given on screen. Once you've updated, your baseband will be updated.
--
Not sure why your baseband isn't already, having re-read the post you say it already has 2.1 update-1 which is wierd. Try updating the phone again anyway it might solve your problem
You can update with pc companion
Sent from my U20i using XDA App
Try updating via PC Companion or SEUS, like that:
http://www.youtube.com/watch?v=zS2LIuy6YfY
I have some probleam. My xperia x10 mini dont upgrade firmware, because it is modify by TIM. So, i have a old firmware and baseband. How i can upgrade firmware? I cant do it in SEUS because say that i have the last firmware, but dont. How can i do? Flash new firmware? If i flash i can return to the original if i have some probleam whit new firmware? Where i can found the last firmware for x10a? Tks anyway!
Yusuke17 said:
Hi guys,
I have a Xperia Mini Pro with this configuration...
Model: U20i
Firmware: 2.1-update1
Baseband: M76XX-TSNCJOLYM-53404006
kernel: 2.6.29
I'm still a noob at installing new versions of Android.
Can anyone tell me how i update the Baseband to M76XX-TSNCJOLYM-53404015?
I already have it rooted, i just can't install modified androids because of this baseband!
Thanks! Any help is welcome!
Click to expand...
Click to collapse
You need to change your build.prop file to fool SE that you have a different version so they'll send you the 015 version. To do this you must:
1. Root the phone.
2. Google and download a build.prop file for your phone (exact model).
3. Change your current /system/build.prop with that one using RootExplorer (or similar).
4. Reboot the phone.
5. Update the phone with PC Companion.
I'm trying to up my firmware to GingerDX (follow guide of stelios97), but he wrote
You must have se new firmware 2.1.1.A.0.6 or 2.1.1.C.0.0 to flash this ROM!
Click to expand...
Click to collapse
I dont know how to know exactly which my firmware is. In "about phone" only write "Firmware version 2.1-update 1"
I searched in 4rum and read that if my baseband version ends in 15, my firmware is one of these two firmwares. But my baseband version ends in 06, does it mean my firmware is not 2.1.1.A.0.6 or 2.1.1.C.0.0? So how can I know exactly what is it?
These my phone's info:
Model number: E10i
Firmware version: 2.1-update 1
Baseband version: M76XX-TSNCJOLYM-53404006
Kernel version: 2.6.29 [email protected]#1
Build number: 2.0.A.0.504
Click to expand...
Click to collapse
One more question:
How can I know my Kernel is nAa 08 Kernel or what Kernel (I dont know what 2.6.29 [email protected]#1 means)? In stelios97's guide wrote that I have to flash nAa 08 Kernel.
yuduy said:
I'm trying to up my firmware to GingerDX (follow guide of stelios97), but he wrote
I dont know how to know exactly which my firmware is. In "about phone" only write "Firmware version 2.1-update 1"
I searched in 4rum and read that if my baseband version ends in 15, my firmware is one of these two firmwares. But my baseband version ends in 06, does it mean my firmware is not 2.1.1.A.0.6 or 2.1.1.C.0.0? So how can I know exactly what is it?
These my phone's info:
One more question:
How can I know my Kernel is nAa 08 Kernel or what Kernel (I dont know what 2.6.29 [email protected]#1 means)? In stelios97's guide wrote that I have to flash nAa 08 Kernel.
Click to expand...
Click to collapse
the firmware is your build number, so you need to update it to proceed. The baseband is correct (ends in 06). If you are in stock rom, your kernel is stock too (to flash a new kernel there are other steps to do before). I hope this get useful for you, and as an advice, read a lot about android!
blackkzero said:
the firmware is your build number, so you need to update it to proceed. The baseband is correct (ends in 06). If you are in stock rom, your kernel is stock too (to flash a new kernel there are other steps to do before). I hope this get useful for you, and as an advice, read a lot about android!
Click to expand...
Click to collapse
Thx for replying
But my build number is 2.0.A.0.504, so my current firmware is 2.0 or 2.1?
And now If I want to update to 2.1.1.A.0.6 by SE update service, I have to relock Bootloader right? (I just Root, xRecovery and unlock Bootloader yesterday). But I read in [Guide] Bootloader and kernel guide | X8 | W8 | X10 mini | X10 mini pro of SpyderX that
If you relock your bootloader while using a custom kernel your phone will be bricked!
Click to expand...
Click to collapse
So what I have to do to relock Bootloader safely? Flash another Kernel (like nAa 08 Kernel) before relock Bootloader?
yuduy said:
Thx for replying
But my build number is 2.0.A.0.504, so my current firmware is 2.0 or 2.1?
And now If I want to update to 2.1.1.A.0.6 by SE update service, I have to relock Bootloader right? (I just Root, xRecovery and unlock Bootloader yesterday). But I read in [Guide] Bootloader and kernel guide | X8 | W8 | X10 mini | X10 mini pro of SpyderX that
So what I have to do to relock Bootloader safely? Flash another Kernel (like nAa 08 Kernel) before relock Bootloader?
Click to expand...
Click to collapse
You read it in a wrong way xD
Well, to relock your bootloader again, your kernel MUST be in stock, otherwise it will be bricked (it says so, I don't even mind to try it)...
To conclude, if you want to relock your bootloader again after having your stock kernel replaced with another kernel, use flashtool to replace your current kernel to the stock one, or just reflash it using SEUS to make sure. After that, you can relock your bootloader again
Hope that helps
yuduy said:
Thx for replying
But my build number is 2.0.A.0.504, so my current firmware is 2.0 or 2.1?
And now If I want to update to 2.1.1.A.0.6 by SE update service, I have to relock Bootloader right? (I just Root, xRecovery and unlock Bootloader yesterday). But I read in [Guide] Bootloader and kernel guide | X8 | W8 | X10 mini | X10 mini pro of SpyderX that
So what I have to do to relock Bootloader safely? Flash another Kernel (like nAa 08 Kernel) before relock Bootloader?
Click to expand...
Click to collapse
your current firmware is 2.1. If you want to start all over again, you can simply go to the support zone in sony ericsson pc companion, in the update firmware section and "repair" (loosing all your data), and probably you will get the latest update available for our minis. And other option is mentioned by StardustGeass
I didnt use PC Companion (feared be bricked cause I unlocked BL already), I used flashtool to up my firmware to 2.1.1.A.0.6 successfully. In fact that I palpitated abit when flashing, but finally it was ok, my mini now is 2.1.1.A.0.6, all Root, xRecovery are removed and Bootloader is relocked now.
Now I have to start again to up FW to 2.3.7: root, xRecovery, unlock BL again, then flash nAa 08 Kernel be4 intall GingerDX from SD card
Thx for helping
This is my first post: Hi to everyone.
My mini is exactly the same than yuduy, except that mine is E10a. I have not modified anything yet, but I want to use the stelios97 Gingerbread ROM. Here in Mexico, according to PC Companion I am completely updated. So the questions are:
1.- What is the best way to update the firmware to meet the requiered buit number?
2.- How do I know if the phone will continue to work in the Mexican phone company TELCEL if I use a new ROM etc?
Thank you
Hi there. I am advised to with this rom and nAa 11 (kernel). I see it's good advice since there is a lot of people enjoying this rom. However today when i checked rom installation requirements i noticed somethig.
Here: http://forum.xda-developers.com/showthread.php?t=1415026
They say that phone need to have:
Requirements:
Latest 2.1.1.A.0.6/2.1.1.C.0.0 SE firmware / Baseband: M76XX-TSNCJOLYM-53404015
But my phone is:
firmware 2.0.A.0.504 and baseband is
M76XX-TSNCJOLYM-534040056
Am i going to get in to trouble if i upload this rom anyway?
Thanks in advance
1. try updating with flash tool: http://forum.xda-developers.com/showthread.php?t=986692 or http://forum.xda-developers.com/showthread.php?t=826455
a good guide for flashtool: http://forum.xda-developers.com/showthread.php?t=928343
2. alternately download pc companion: http://www.sonyericsson.com/cws/sup...ject/pccompanion/xperiax10minipro?cc=ph&lc=en
and update you phone software.
3. use seus but i cant find the link to download.
because if you dont it wont work and as they always say "I wont be held responsible if you brick you phone"
You have to use the correct firmware and baseband. Otherwise will have problems.
I flash a few roms with the wrong baseband and had a lots of problems of stability.
Now I have MiniCM7-2.1.9, with nAa-11 kernel and works perfect.
Ok thanks. I'll try to find that firmware version and flash it before i continue with kernel and rom. Do you have any link to where i could find these firmware versions?
magnumko said:
Ok thanks. I'll try to find that firmware version and flash it before i continue with kernel and rom. Do you have any link to where i could find these firmware versions?
Click to expand...
Click to collapse
Try this one //db.tt/ukt80PBn (I can't post links yet)
Or search in the "XPERIA X10 Mini Pro Android Development " area.