i bought a new galaxy s advance few days back, less than even a month. It came with stock gingerbread 2.3.6. As there was no update available over the air, so i tried to update it via samsung kies. Well, updating was in progress and my phone was in downloading mode already. During half the process of downloading, suddenly my windows crashed due to some blue screen error. When I restarted the phone, it just kept on starting again and again. So, tried recovering it via odin back to gingerbread. But after flashing, it only get stuck at Samsung Galaxy S Advance logo. No recovery mode, no boot, just a damn logo. And downloading mode is working too. Don't know what to do now!! Plz Help!!!
Service center
take your phone to the service center and only tell them that the update to jelly bean via kies failed
Related
Please help me guys, i might be posting this in wrong threat or the question might be repeating but i am in trouble. Sorry for that
I have rooted my Galaxy vibrant T959, i was using CM ROM Icecream sandwich since so long.
These days i was in craze of installing Jellybean in my phone, i installed CM 10.1 and succesfully upgraded it to 4.2.1 Jelly Bean with Gapps Signed. Everything was perfectly working but within half an hour of update my phone was stuck at Cyanomod Screen.
I tried Restart, power off, pulled out battery even but phone didn't proceed ahead. I can't even enter into Recovery mode. The only action i could perform was to enter into download mode.
Using Odin, i have downgraded my phone to Eclair. This is the way i have tried for number of times whenever stuck. And that is still workable, but after this process too my phone just shows up Samsung I9000 Screen and then Vibrant Screen. I then Turns off and shows no response.
Kindly help me out to run my phone. Or lead me to Recovery mode, i will complete rest process myself.
Thanks in advance, eagerly waiting for your response.
No replies ???
Please answer my problem guys! I am so worried
Hey guys
Today i was trying to downgrade my s2 from 4.1.2 to 2.3.6 by Odin 1.85 program.
In the middle of the process i plugged off the phone accidentally.
So after that i turned off the phone and tried to power it on back but the phone did't boot anything even the os or the recovery or download mode, I got only a black screen.
And the tutorial i was following http://www.youtube.com/watch?v=ModCPTUbIjA
So i hope if can anyone help me.
I would be very thankful
Service centre. Or if you want to try a jig, try one (very unlikely to work though).
(*Here's how the whole story started.) So I recently wanted to update my Galaxy S3, and for some reason the Baseband Version was different from other AT&T Galaxy S3 Devices. So, after I brought it in to Best-Buy they said they can't fix it, even though I contacted Samsung and they told me they could flash it with this ''SMART'' Tool (Which Probably is Odin3) Rooted or Not. I was tired of trying to fix this because, I was on 4.0.4 Ice-Cream Sandwich, and my friends bragging about the 4.4 KitKat Update they received. I literally tried everything, from clearing the Google Services and the AT&T Software Update on the Application Manager. I had the Baseband Version: I747UCLF5. I was tired of not getting the update, so I just flashed the Original ROM from Samsung-Updates, using Odin3. Samsung-Updates had only 4.1.1 Jelly-Bean, so I thought about just updating from Jelly-Bean.
(*Here's how the Samsung Galaxy S3 wouldn't turn on), and was stuck on a boot-loop.) So, continuing the story, I successfully updated to 4.1.1. Jelly-Bean. So, when I was on the 4.1.1 Jelly-Bean I checked for updates, and I successfully updated to 4.3 Jelly-Bean. Yes, I know that the 4.4 Kit-Kat update was out, so I continued updating the phone via OTA. When it finished, it started updating with AT&T Logo on top and the Percent with the Bar on the bottom. After it reached 100%, it was rebooting crazy. The Samsung logo went on and off and the phone went vibrating every second. I'm pretty sure my power button is not broken and when I put it in Recovery-Mode the same updating process came. (AT&T Logo, Loading Bar with Percent and a message saying ''Updating...''). Ever since that day, I re-charged it and I put it in Recovery-Mode, and same thing happens and when it finishes it's doing the boot-loop. I tried putting it in Download-Mode and tried to flash it with Odin3, but it didn't work at all. It had this error message. I'm pretty sure the Boot-Loop is caused by a Locked Boot-Loader. This is What it says in Download Mode.
ODIN MODE
PRODUCT NAME: SGH-I747
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
QUALCOMM SECUREBOOT: ENABLE
Warranty Bit: 0
BOOTLOADER RP SWREV: 3
Please try to help me with my situation. I am currently using a older phone, and I am desperate of getting my phone back. Thanks! Anything will Help!
(*Here's how the whole story started.)*So I recently wanted to update my Galaxy S3, and for some reason the Baseband Version was different from other AT&T Galaxy S3 Devices. So, after I brought it in to Best-Buy they said they can't fix it, even though I contacted Samsung and they told me they could flash it with this ''SMART'' Tool (Which Probably is Odin3) Rooted or Not. I was tired of trying to fix this because, I was on 4.0.4 Ice-Cream Sandwich, and my friends bragging about the 4.4 KitKat Update they received. I literally tried everything, from clearing the Google Services and the AT&T Software Update on the Application Manager. I had the Baseband Version: I747UCLF5. I was tired of not getting the update, so I just flashed the Original ROM from Samsung-Updates, using Odin3. Samsung-Updates had only 4.1.1 Jelly-Bean, so I thought about just updating from Jelly-Bean.*
(*Here's how the Samsung Galaxy S3 wouldn't turn on), and was stuck on a boot-loop.)*So, continuing the story, I successfully updated to 4.1.1. Jelly-Bean. So, when I was on the 4.1.1 Jelly-Bean I checked for updates, and I successfully updated to 4.3 Jelly-Bean. Yes, I know that the 4.4 Kit-Kat update was out, so I continued updating the phone via OTA. When it finished, it started updating with AT&T Logo on top and the Percent with the Bar on the bottom. After it reached 100%, it was rebooting crazy. The Samsung logo went on and off and the phone went vibrating every second. I'm pretty sure my power button is not broken and when I put it in Recovery-Mode the same updating process came. (AT&T Logo, Loading Bar with Percent and a message saying ''Updating...''). Ever since that day, I re-charged it and I put it in Recovery-Mode, and same thing happens and when it finishes it's doing the boot-loop. I tried putting it in Download-Mode and tried to flash it with Odin3, but it didn't work at all. It had this error message. I'm pretty sure the Boot-Loop is caused by a Locked Boot-Loader. This is What it says in Download Mode.
ODIN MODE
PRODUCT NAME: SGH-I747
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
QUALCOMM SECUREBOOT: ENABLE
Warranty Bit: 0
BOOTLOADER RP SWREV: 3
Please try to help me with my situation. I am currently using a older phone, and I am desperate of getting my phone back. Thanks! Anything will Help!
So I kinda soft-bricked my galaxy ace 2 i8160 and Samsung Kies doesn't help at all I go to odin download mode, plug phone to PC and after 5 minutes of thinking, it says (device not responding, to resolve the issue, reboot the device). Can someone help me get back to pure firmware 2.3.6 or 4.1.2? I've now installed 4.1.2 jellybean and it's stuck on loading screen. I've tried both cyanogenmod 10.2 and 11, my phone couldn't detect sim card contacts and couldn't make a call, it says turn off plane mode, even if it's off...
nevermind... thanks guys... I just recovered my phone using instructions in this link...: http://www.droidviews.com/how-to-downgrade-galaxy-ace-2-gt-i8160-to-gingerbread-from-android-4-1-2/