Related
Hi @all,
maybe some of you guys could help me with my problem.
I updated my Hero to the Cronos 1.4 (I think) a month ago.
Last week, I recognized that the USB mass storage connection does not work anymore.
I tried it on another PC, but no connection.
I tried another Hero with my PC, usb connection worked.
I found this link to the modaco forum:
http://android.modaco.com/content-page/299174/no-adb-no-sd/page/80/
So I followed the instructions of the first post on page 5.
Everything worked till that point where I should flash the RUU_Hero_HTC_WWE_1.76.405.1_R3_WWE_release_signed_NoDriver.exe.
So, here is what I have done so far:
- created a goldcard (with another hero, a friend has one).
- extracted the rom.zip from HTC Hero RUU_Hero_HTC_WWE_2.73.405.5_WWE_release_signed_NoDriver.exe
- flashed it via fastboot
- then I wanted to try the fastboot oem eraseconfig, but like it's said in the post, the eraseconfig command is not included
- so I extracted the rom.zip from RUU_Hero_HTC_WWE_1.76.405.1_R3_WWE_release_signed_NoDriver.exe
- tried to flash it, downgrade should be possible because of the goldcard
- but I now get the error "INFOchecking main version... FAILED (remote: 43 main version check fail)"
What can I do?
Could I extract the hboot from the 1.76.405.1_R3 and replace the one of 2.73.405.5 just to have the eraseconfig command?
Every kind of help is appreciated.
Thanks
André
Goldcards are handset specific as it has something to do with the serial number.
This MIGHT be the issue.
Really? On another post I read that they are specific to the sd-card, as one has to identify the unique id of the sd card and not of the handset.
Here's the link to the thread:
http://forum.xda-developers.com/showthread.php?t=648102
You sure?..... Ask your pal to do the "cat /sys/class/mmc_host/mmc1/mmc1:*/cid" bit using two different SD cards (yours and his own one) to see if the code is the same of or not.
..... or backup the goldcard your pal done you,... then make a new one yourself using whatever guide your using at the mo,... along with this one,..... http://thatsbadass.com/android/tag/cid/ ... <--that guide shows how to get your CID without plugging your phone in.
I tried it with another card and its another code. So I think it depends on the sd-card.
So, I think I tried flashing before I created the goldcard and that process stopped at the very beginning, saying something like cid check failed or so and not with that "main version check fail" message.
EDA-One said:
I tried it with another card and its another code. So I think it depends on the sd-card.
So, I think I tried flashing before I created the goldcard and that process stopped at the very beginning, saying something like cid check failed or so and not with that "main version check fail" message.
Click to expand...
Click to collapse
Aha,... OK,... You must be right,... apologies.
.... Have you tried using flashrec already?....
If I remember correctly, you cannot flash this version directly since it is actually a downgrade. I don't remember clearly how I managed to bring it up, either it was thanks to a Goldcard (I did experiment with that), or it was enough to patch the custom recovery image (see http://android.modaco.com/content/h...android-modaco-com-index-phpshowtopic-292396/).
Click to expand...
Click to collapse
not yet. but i will try now.
But I don't know, what should I try to flash with flashrec.
A new recovery rom? I think flashrec only allows *.img, or am I missing something?
...
...
...
OK,that worked.
Now I will try to flash the RUU_Hero_HTC_WWE_1.76.405.1_R3_WWE_release_signed.
updating or rather downgrading with the cyanogen recovery does not work. it says: Can't open /sdcard/HEROIMG_.......release_signed.zip(bad).
so i will try flashing via fastboot
Did you get this resolved?
No, it doesn't work.
Now I even got no wifi. Could not activate it.
Does there exist a custom rom, that I could flash and that contains a newer hboot, which contains the eraseconfig command?
Hi,
I had exactly the same problem and used that post from modaco to get out of it. As I understand it, you have reflashed the first RUU, so you have SD access but still no USB, right?
When I got to that stage, I didn't use the 2nd RUU at all, I just reflashed the new SPL (update-hero-hboot-1.76.2007-signed.zip) which opened up the fastboot oem eraseconfig option. I was on 1.76.0007 already (check the S-OFF is displayed on the fastboot screen, that means the goldcard is working AFAIK)
Flashing that SPL was enough, I think the oem commands are in there rather than the ROM itself (since in fastboot mode, the SPL is the only thing that is running).
Hope that helps.
Where can I get this one?
OK, found it and will try it.
OK, i could update the SPL.
But eraseconfig does not make any change.
Now that I got the engineering SPL, I hopefully find a solution.
I will dive deep inside the forum and try to find a way to get my USB up and running.
Many thanks till now.
I can't find a solution, usb and adb still do not work.
What I've done:
- Tried "fastboot oem eraseconfig" --> no change
- "fastboot oem readconfig" gives:
INFOindex:0x0, value:0x0
INFOindex:0x1, value:0x0
INFOindex:0x2, value:0x0
INFOindex:0x3, value:0x0
INFOindex:0x4, value:0x0
INFOindex:0x5, value:0x0
INFOindex:0x6, value:0x0
INFOindex:0x7, value:0x0
INFOindex:0x8, value:0x0
INFOindex:0x9, value:0x0
OKAY [ 0.023s]
finished. total time: 0.023s
-"fastboot oem boot" gives:
... INFOsetup_tag addr=0xA0000100 cmdline add=0x8F0841F0
INFOTAG:Ramdisk OK
INFOTAG:smi ok, size = 32
INFOTAG:hwid 0x1
INFOTAG:skuid 0x20800
INFOTAG:hero panel = 0x3
INFOTAG:engineerid = 0x3
INFODevice CID is not super CID
INFOCID is T-MOB101
INFOsetting.cid::T-MOB101
INFOserial number: HT97xxxxxxxx
INFOcommandline from head: no_console_suspend=1 console=null
INFOcommand line length =350
INFOactive commandline: board_hero.disable_uart3=0 board_hero.us
INFOb_h2w_sw=0 board_hero.disable_sdcard=0 smisize=32 androidbo
INFOot.baseband=6.35.06.18 androidboot.cid=T-MOB101 androidboot.
INFOcarrier=TMD androidboot.mid=HERO10000 androidboot.keycaps=qw
INFOertz androidboot.mode=normal androidboot.serialno=HT97xxxxxxxx
INFO71 androidboot.bootloader=1.76.2007 no_console_suspend=1 con
INFOsole=null
INFOaARM_Partion[0].name=misc
INFOaARM_Partion[1].name=recovery
INFOaARM_Partion[2].name=boot
INFOaARM_Partion[3].name=system
INFOaARM_Partion[4].name=cache
INFOaARM_Partion[5].name=userdata
INFOpartition number=6
INFOValid partition num=6
INFO0
INFO0
INFO69466957
INFO69784520
INFO69007473
INFO7473
INFO0
INFO0
INFO0
INFO0
INFO0
INFO0
INFO0
INFO0
INFO0
INFO0
INFO0
INFO0
INFO0
INFO0
INFO0
INFO0
INFO0
INFO0
INFO0
INFO0
INFO0
INFO0
INFO0
INFO0
INFO0
INFO0
FAILED (status read failed (Too many links))
finished. total time: 6.158s
Hmm, all the uart_disable and sdcard_disable are set to 0, so it looks like the eraseconfig has done its job (in that sense).
Just throwing a few ideas around here.
Do you have access to the SD card now and/or wi-fi now? I guess we really need a way to get access to the logs, but without USB you might need to use a file manager and try to find them... you want the equivalent of adb logcat basically...
when you plug-in a USB cable to the device, do any of the notifications come up on the hero and what does it say under the charging info, is it charging(AC) or charging(USB)?
Could just be the PC drivers if the device is detecting USB now?
Charging works in both cases (AC/USB).
Still got no USB-Connection, no connection notification is coming up on the device.
On the device I can access the sdcard.
WiFi is not working anymore.
Just flashed Modaco 3.2 and WiFi works again.
Now i have root access with a file explorer.
OK, I installed that aLogcat-App that saves the log to SD. I will try to create some logs, plugging in the usb cable.
So, heres the log. There's something strange going on, I think.
See my comments
I connected the USB-cable:
D/UsbConnectedReceiver( 248): ACTION_BATTERY_CHANGED
D/UsbConnectedReceiver( 248): unplugged = 1
//--> unplugged = 1 ?!?!
D/dalvikvm( 234): GC freed 2834 objects / 153480 bytes in 138ms
D/dalvikvm( 183): GC freed 315 objects / 14504 bytes in 91ms
D/dalvikvm( 143): GC freed 215 objects / 8544 bytes in 133ms
D/KeyguardUpdateMonitor( 95): receive ACTION_BATTERY_CHANGED
D/HtcLockScreen( 95): onRefreshBatteryInfo: 100
D/KeyguardViewMediator( 95): pokeWakelock(15000)
I/HtcLockScreen( 95): updateStatusViewByPriority
I disconnected the cable:
D/UsbConnectedReceiver( 248): ACTION_BATTERY_CHANGED
D/UsbConnectedReceiver( 248): unplugged = 0
//-> unplugged = 0 ?!?!
D/UsbConnectedReceiver( 248): USB Disconnected.
D/UsbConnectedReceiver( 248): Catch USB Disconnect Event, USB cable does really not exist.
D/UsbConnectedReceiver( 248): ADB Enable = true
// --> enable adb on disconnect ?
D/UsbConnectedReceiver( 248): ADB StartByMe = false
D/UsbConnectedReceiver( 248): Try to stop PSService.
Here is the log of a friend that has the hero too:
D/StatusBarPolicy( 136): cable plugged, mPluggedBatteryLevel=58
D/UsbConnectedReceiver( 300): ACTION_BATTERY_CHANGED
D/UsbConnectedReceiver( 300): unplugged = 1
D/KeyguardUpdateMonitor( 136): receive ACTION_BATTERY_CHANGED
D/UsbConnectedReceiver( 300): ACTION_BATTERY_CHANGED
D/UsbConnectedReceiver( 300): unplugged = 2
D/UsbConnectedReceiver( 300): USB Connected.
D/UsbConnectedReceiver( 300): mObexServerStarted=true
D/UsbConnectedReceiver( 300): mAtCommandServerStarted=false
D/UsbConnectedReceiver( 300): Try to start ATCommandService.
D/PSService( 300): onStart()
D/UsbConnectedReceiver( 300): Show Notification...
D/UsbConnectedReceiver( 300): Server Start Up. ServerType=1 ServerStatus=1
D/UsbConnectedReceiver( 300): mObexServerStarted=true mAtCommandServerStarted=true
D/UsbConnectedReceiver( 300): Show Notification...
D/MountListener( 136): handleEvent ums_connected
D/dalvikvm( 2363): GC freed 1621 objects / 82560 bytes in 129ms
D/dalvikvm( 300): GC freed 3754 objects / 615400 bytes in 106ms
D/dalvikvm( 300): GC freed 4448 objects / 776848 bytes in 101ms
D/MountListener( 136): handleEvent ums_disabled
D/MountListener( 136): handleEvent ums_disconnected
D/KeyguardUpdateMonitor( 136): receive ACTION_BATTERY_CHANGED
D/HtcLockScreen( 136): onRefreshBatteryInfo: 33
D/KeyguardViewMediator( 136): pokeWakelock(15000)
I/HtcLockScreen( 136): updateStatusViewByPriority
D/UsbConnectedReceiver( 300): ACTION_BATTERY_CHANGED
D/UsbConnectedReceiver( 300): unplugged = 0
D/UsbConnectedReceiver( 300): USB Disconnected.
D/UsbConnectedReceiver( 300): Catch USB Disconnect Event, USB cable does really not exist.
D/UsbConnectedReceiver( 300): ADB Enable = true
D/UsbConnectedReceiver( 300): ADB StartByMe = false
D/UsbConnectedReceiver( 300): Try to stop PSService.
I/ActivityManager( 136): Stopping service: com.htc.android.psclient/.PSService
D/UsbConnectedReceiver( 300): Server Start Up. ServerType=1 ServerStatus=0
D/dalvikvm( 2318): GC freed 8615 objects / 518960 bytes in 121ms
D/dalvikvm( 383): GC freed 3095 objects / 170360 bytes in 112ms
D/dalvikvm( 206): GC freed 2271 objects / 398152 bytes in 140ms
Hi all,
I have a t-mobile phone and tried to install android 2.2. there. I used mdeejay's and darkStone's builds, but wifi didn't work at any of them. I've found a person who uses T-mobile hd2 too and installed the same versions of rom and radio. It didn't helped. In windows mobile wifi works well.
Could you please advice how to hande it? Did anyone face the same problem?
Thank you in advance.
#did some debug via adb:
I suppose that the red line below tells about reason.. But I haven't dealt with WPA on android before.. Any help is appreciated.
D/WifiService( 1916): setWifiEnabled( mAirplaneModeOverwridden=)false
I/WifiHW ( 1916): wifi_load_driver enter
D/NetSharing_NSReceiver( 2298): onReceive : android.net.wifi.WIFI_STATE_CHANGED
D/NetSharing( 2298): wifi enabled change, state = false
I/WifiHW ( 1916): wifi_load_driver end right 3
I/WifiHW ( 1916): wifi_start_supplicant enter
I/WifiHW ( 1916): wifi_start_supplicant end right 2
D/WifiService( 1916): ACTION_BATTERY_CHANGED pluggedType: 2
I/wpa_supplicant( 2771): CTRL-EVENT-STATE-CHANGE id=-1 state=0 BSSID=00:00:00:00
:00:00
E/wpa_supplicant( 2771): Failed to disable WPA in the driver.
D/NetSharing_NSReceiver( 2298): onReceive : android.net.wifi.WIFI_STATE_CHANGED
D/NetSharing( 2298): wifi enabled change, state = true
D/PowerManagerService( 1916): New lightsensor value:40, lcdValue:90
D/lights ( 1916): set_light_buttons
D/lights ( 1916): set_light_keyboard
E/SettingsWifiLayer( 2298): Unable to scan for networks
D/SurfaceFlinger( 1916): Layer::setBuffers(this=0x6257a8), pid=2298, w=1, h=1
D/SurfaceFlinger( 1916): Layer::setBuffers(this=0x6257a8), pid=2298, w=1, h=1
D/SurfaceFlinger( 1916): Layer::requestBuffer(this=0x6257a8), index=0, pid=2298,
w=350, h=85 success
E/WifiHW ( 1916): Supplicant not running, cannot connect
E/SettingsWifiLayer( 2298): Unable to scan for networks
D/SurfaceFlinger( 1916): Layer::setBuffers(this=0x4ca268), pid=2298, w=1, h=1
D/SurfaceFlinger( 1916): Layer::setBuffers(this=0x4ca268), pid=2298, w=1, h=1
D/SurfaceFlinger( 1916): Layer::requestBuffer(this=0x4ca268), index=0, pid=2298
w=350, h=85 success
E/WifiHW ( 1916): Supplicant not running, cannot connect
V/WifiStateTracker( 1916): Supplicant died unexpectedly
D/WifiStateTracker( 1916): Reset connections and stopping DHCP
D/NetUtils( 1916): ifc_get_info addr=0 !
D/WifiStateTracker( 1916): Disabling interface
D/WifiService( 1916): setWifiEnabled( mAirplaneModeOverwridden=)false
D/WifiStateTracker( 1916): Reset connections and stopping DHCP
D/NetUtils( 1916): ifc_get_info addr=0 !
D/NetSharing_NSReceiver( 2298): onReceive : android.net.wifi.WIFI_STATE_CHANGED
D/NetSharing( 2298): wifi enabled change, state = true
D/WifiStateTracker( 1916): Disabling interface
I/WifiHW ( 1916): wifi_stop_supplicant enter
I/WifiHW ( 1916): wifi_stop_supplicant end right 1
I/WifiHW ( 1916): wifi_unload_driver enter
I/WifiHW ( 1916): wifi_unload_driver end right 2
D/NetSharing_NSReceiver( 2298): onReceive : android.net.wifi.WIFI_STATE_CHANGED
D/NetSharing( 2298): wifi enabled change, state = false
how to set up MAC address for android builds (except startup.txt)?
Hi again,
I did some search and found that the core of the problem is in getting MAC address for wifi. (as dmsg says). Exactly the same problem was for Touch2, Tilt and other devices (http://forum.xda-developers.com/showthread.php?p=9211659) and it was resolved after they corrected wifi-nvram.txt. This file is responsible for setting up MAC address there, but I couldn't find it at builds for hd2.
if anybody knows what file is used to set up MAC address for wifi, I would be very appreciated.
Thanks!
I believe they just checked for their WiFi mac address from one of the following locations:
Settings->About phone->Status
Wireless & Networks -> WiFi Settings -> Menu Button -> Advanced
Then they edited the nvram.txt file @ /system/lib/hw/wifi/nvram.txt to include the proper MAC address.
Thanks for the answer!
Unfortunatelly wireless settings are not available until wifi is turned on.
I investigated the problem deeper and found that the reason could be in wifi hardware initialization. I did dmesg and saw the following:
wlan: wifi_set_power = 1
htcleo_wifi_power: 1
wlan: wifi_set_carddetect = 1
htcleo_wifi_set_carddetect: 1
mmc0: card_present 1
mmc0: Slot status change detected (0 -> 1)
wlan: Dongle Host Driver, version 4.218.204.2
mmc0: queuing CIS tuple 0x91 length 3
mmc0: new high speed SDIO card at address 0001
wlan: DHD: dongle ram size is set to 294912(orig 294912)
wlan: dhd_bus_rxctl: resumed on timeout
wlan: firmware version: ver
wlan: Return_dpc value is : 0
wlan: stop poll
wlan: dhd_bus_rxctl: resumed on timeout
wlan: dhd_preinit_ioctls: can't get MAC address , error=-110
wlan: dhdsdio_probe: failed
Since in windows mobile wifi does work I used the firmware files from WM: nvram.txt and rtecdc1.bin. As it turned out nvram in android is located in /proc/calibraion. But unfortunatelly it didn't help. So, I think that the problem is in bcm4329.ko driver. I'm not sure why other people with the same hd2 (t-mobile US) and the same ROM/RADIO/Android have no such issue. Perhaps my broadcomm hardware has a problem which is bypassed in windows, but not in Android.
I wonder if there is a way to get more detailed info than dmesg and logcat give (except building andoid sources of course ).
I don't know if it can help, but still, I'll say it anyway.
I think i had the same problem some times ago.
Wifi in android wouln't work, but was perfectly working in winmo.
it seems that if wifi is on in winmo when you boot on android, the wifi device seems to be blocked in some way.
Do you have wifi enabled in winmo? if yes, try to disable it, and boot on android to see if it works.
Hi kushulain,
Thanks for the advice! (I've almost started to build andriod by myself to find out the reason..) Unfortunatelly wifi was turned off when android was booting.
But this is another point to play around. I haven't tried to boot andriod with wifi turned on.
Thanks!
Just tried to boot andriod with wifi turned on. The device hangs at the beginning of the booting (even before screen with 'htc' appears). I think it is connected to my problem.
Did someone have similar problems?
Hey, I have the same problem, did you find any solution ?
Guys have you tried to change the radio part of the phone with a suitable one?
canavaro said:
Hey, I have the same problem, did you find any solution ?
Click to expand...
Click to collapse
hi, I didn't fix it actually due to lack of time. I tried to use wm hw init files in Android, but it didn't help. There is a score of my posts on this forum regarding this topic so you can find exactly what I tried. The funny thing is that WiFi works in wp7.
To stealth21
yes, that was the first thing I tried.
Hi guys!! I am doing some experiments using my Xperia S. My phone is Network locked and also locked bootloader. . But I managed to root it. So now I have full access to all system folder. I have several questions. You guys are genius! May be I'll get answer what I am looking for.
Q1. I have installed System tuner pro. When I go task manager of the app, it saw one CPU is tuned off. I can't figure out why? Is there any one know this?
Q2. When I put another SIM, obviously it asks unlock code. I am trying to understand how it works. I mean the mechanism of unlocking. Here I put some of the line of the log file:
E/SemcSettingsParser(11617): key not found. key=[brand]
E/SemcSettingsParser(11617): key not found. key=[group-visible]
D/PhoneApp( 651): requesting network depersonalization with pin:
I/ONCRPC ( 144): rpc_handle_rpc_call: for Xid: 2c, Prog: 3100006b, Vers: 00010001, Proc: 00000001
I/ONCRPC ( 144): rpc_handle_rpc_call: Find Status: 0 Xid: 2c
I/ONCRPC ( 144): oncrpc_proxy_handle_cmd_rpc_call: Dispatching xid: 2c
W/ActivityManager( 318): finishReceiver called but no pending broadcasts
W/ActivityManager( 318): finishReceiver called but no pending broadcasts
W/ActivityManager( 318): finishReceiver called but no pending broadcasts
W/ActivityManager( 318): finishReceiver called but no pending broadcasts
W/ActivityManager( 318): finishReceiver called but no pending broadcasts
I/tad ( 107): MiscTA Unit 2010:
I/tad ( 107): NOT WRITTEN (Identical)
I/tad ( 107): MiscTA: Write of unit 2010 completed - OK
I/ONCRPC ( 144): rpc_handle_rpc_call: for Xid: 2d, Prog: 3100006b, Vers: 00010001, Proc: 00000001
I/ONCRPC ( 144): rpc_handle_rpc_call: Find Status: 0 Xid: 2d
Do you know what MiscTA Unit 2010 is ? How and where can I access it?
Thank you.
No reply!!!
plasmid09 said:
Hi guys!! I am doing some experiments using my Xperia S. My phone is Network locked and also locked bootloader. . But I managed to root it. So now I have full access to all system folder. I have several questions. You guys are genius! May be I'll get answer what I am looking for.
Q1. I have installed System tuner pro. When I go task manager of the app, it saw one CPU is tuned off. I can't figure out why? Is there any one know this?
Q2. When I put another SIM, obviously it asks unlock code. I am trying to understand how it works. I mean the mechanism of unlocking. Here I put some of the line of the log file:
E/SemcSettingsParser(11617): key not found. key=[brand]
E/SemcSettingsParser(11617): key not found. key=[group-visible]
D/PhoneApp( 651): requesting network depersonalization with pin:
I/ONCRPC ( 144): rpc_handle_rpc_call: for Xid: 2c, Prog: 3100006b, Vers: 00010001, Proc: 00000001
I/ONCRPC ( 144): rpc_handle_rpc_call: Find Status: 0 Xid: 2c
I/ONCRPC ( 144): oncrpc_proxy_handle_cmd_rpc_call: Dispatching xid: 2c
W/ActivityManager( 318): finishReceiver called but no pending broadcasts
W/ActivityManager( 318): finishReceiver called but no pending broadcasts
W/ActivityManager( 318): finishReceiver called but no pending broadcasts
W/ActivityManager( 318): finishReceiver called but no pending broadcasts
W/ActivityManager( 318): finishReceiver called but no pending broadcasts
I/tad ( 107): MiscTA Unit 2010:
I/tad ( 107): NOT WRITTEN (Identical)
I/tad ( 107): MiscTA: Write of unit 2010 completed - OK
I/ONCRPC ( 144): rpc_handle_rpc_call: for Xid: 2d, Prog: 3100006b, Vers: 00010001, Proc: 00000001
I/ONCRPC ( 144): rpc_handle_rpc_call: Find Status: 0 Xid: 2d
Do you know what MiscTA Unit 2010 is ? How and where can I access it?
Thank you.
Click to expand...
Click to collapse
Hey Guys!
No answer !!!!!!
Would like to help but I dont know what are you talking about
Sent from my GT-P7510 using xda app-developers app
1) ignore that, it's used when it's needed
2) you can't unlock without a code
K900 said:
1) ignore that, it's used when it's needed
2) you can't unlock without a code
Click to expand...
Click to collapse
I am completely ignore about Mobile OS and how it works. As I am from different field I am not aware about inner mechanism how things are happening in the mobile. But I am interested to know 'how it works' about this high-end mobile.
I got my first question's answer. I saw in properties of System tuner pro. One processor speed is 384MHZ (may be blocked at this speed or it uses high speed when CPU harness program run) and another processor can run highest speed 1.5 GHZ.
In case of second question. I told that I want to understand how SIM lock process works. Yes I know (may be everybody know) can't unlock without a code. But I am not interested about code. Because If I pay some to my operator they will give me the code next week. It's easy. But I am thinking I have a lock but I don't have a key. Every man-made lock can be broken either soft or hard. If I know the process how it works then I will find the answer. I know here in XDA, there are some bright persons who are pro about Mobile OS. I look forward to them to help me find the answer.
In the meantime I did some experiments. I found some posts that this code
su [Enter]
strings -n 8 dev/block/mmcblk0p6 [Enter]
give some information but i didn't find anything in my file except some encrypted thing which change each time I run the code. But I when run mmcblk0p1 it gives me IMEI, S/N, Operator and many other kode from Marlin DRM codes, octpus codes, X509 certificates etc.
Is there any clue in this file about sim lock?
I am sorry for asking this type of questions (which may be suitable for development related) here. As my post are less than 10 so I can't post in development.
Thanks Guys.
plasmid09 said:
I am completely ignore about Mobile OS and how it works. As I am from different field I am not aware about inner mechanism how things are happening in the mobile. But I am interested to know 'how it works' about this high-end mobile.
I got my first question's answer. I saw in properties of System tuner pro. One processor speed is 384MHZ (may be blocked at this speed or it uses high speed when CPU harness program run) and another processor can run highest speed 1.5 GHZ.
In case of second question. I told that I want to understand how SIM lock process works. Yes I know (may be everybody know) can't unlock without a code. But I am not interested about code. Because If I pay some to my operator they will give me the code next week. It's easy. But I am thinking I have a lock but I don't have a key. Every man-made lock can be broken either soft or hard. If I know the process how it works then I will find the answer. I know here in XDA, there are some bright persons who are pro about Mobile OS. I look forward to them to help me find the answer.
In the meantime I did some experiments. I found some posts that this code
su [Enter]
strings -n 8 dev/block/mmcblk0p6 [Enter]
give some information but i didn't find anything in my file except some encrypted thing which change each time I run the code. But I when run mmcblk0p1 it gives me IMEI, S/N, Operator and many other kode from Marlin DRM codes, octpus codes, X509 certificates etc.
Is there any clue in this file about sim lock?
I am sorry for asking this type of questions (which may be suitable for development related) here. As my post are less than 10 so I can't post in development.
Thanks Guys.
Click to expand...
Click to collapse
Any Answer!!! or Suggestions!!!
plasmid09 said:
Any Answer!!! or Suggestions!!!
Click to expand...
Click to collapse
Any Answer!!! or Suggestions!!!
plasmid09 said:
Any Answer!!! or Suggestions!!!
Click to expand...
Click to collapse
I recently found this:
some tools unlocking the phone using TA and MiscTA. but What this program writing??? and How any IDEA???
Power off phone,press and hold Back or Volume Down key,attach usb cable
Waiting phone attach...OK
EROM VER: R10CA003
ID: 1247-3874
IMEI: 3517100572XXXX
Model: LT26i
Get server list...OK
Connecting server...OK
verify user...OK
Credits Remaining: 30,Credits Required: 30
Write bootloader...OK
Reading phone identifier...OK
LOADER VER:R5C004
Reading ta...OK(280 units saved)
Reading ta misc...OK(63 units saved)
Gdfs data save to C:\Documents and Settings\Dave\Desktop\INQ CHAT 3G\ezSEMC_S1_Android_v1.22\backup\gdfs_20120705085 XXX_351710057XXXX1.zip
request in queue,waiting...ready
unlocking...OK
Click to expand...
Click to collapse
Thanks
plasmid09 said:
I recently found this:
some tools unlocking the phone using TA and MiscTA. but What this program writing??? and How any IDEA???
Thanks
Click to expand...
Click to collapse
anyone can tell where is radio folder located?
Xperia S ICS
Is there any file like nv_data.bin in xperia s?
Link
http://forum.xda-developers.com/showthread.php?t=1369474
Hi Guys any answer!!! or Suggestions!!!!
How can I copy all data (not only SD card) in my xperia s to my computer. I tried the Droid explorer but no luck!
Thanks
Is there in method for Xperia S like samsung and HTC- Root+Network unlock?
king-dano said:
Would like to help but I dont know what are you talking about
Sent from my GT-P7510 using xda app-developers app
Click to expand...
Click to collapse
thanks
see my next posts
Hi, have you found a solution?
Thanks
Hi all
I was looking around to find a way to unlock my bootloader. I tried almost everything and got no results, my phone just reboots. But now i find THIS PAGE and was wondering if THIS COMMIT can help us out (people who cant unlock the damm bootloader). I have no experience with this, but if anyone can take a look and just say if im saying crap here, it would be awesome.
Thanks in advance
shucrut said:
Hi all
I was looking around to find a way to unlock my bootloader. I tried almost everything and got no results, my phone just reboots. But now i find THIS PAGE and was wondering if THIS COMMIT can help us out (people who cant unlock the damm bootloader). I have no experience with this, but if anyone can take a look and just say if im saying crap here, it would be awesome.
Thanks in advance
Click to expand...
Click to collapse
What happened? Did you do what i told you?
Sent from my LG-P769 using Tapatalk 4
@omgbossis21 you should take a look at this...
sent from my locked rooted P769 v20f
I'm on YouTube (BioDesigner48)
geeshiet said:
What happened? Did you do what i told you?
Sent from my LG-P769 using Tapatalk 4
Click to expand...
Click to collapse
Nothing happened, i found this by coincidence. I did what u said and replied your post here
Well, maybe its nothing, but i logcat when i went to check bootloader lock menu (http://forum.xda-developers.com/showthread.php?t=2394274)
Code:
V/xt9input_alpha( 573): alpha_setAttribute(context(5C39F788))...success
V/xt9input_alpha( 573): alpha_hasLdb(context(0x5C39F788))...
V/xt9input_dbregistry( 573): DBRegistry::get_ldb_path(0x0109)...LG_902_r1-16_ENubUN_xt9_ALM.ldb
V/xt9input_alpha( 573): alpha_hasLdb(context(0x5C39F788))... 0x0109=>1
V/xt9input_alpha( 573): alpha_hasLdb(context(0x5C39F788))...
V/xt9input_dbregistry( 573): DBRegistry::get_ldb_path(0x0109)...LG_902_r1-16_ENubUN_xt9_ALM.ldb
V/xt9input_alpha( 573): alpha_hasLdb(context(0x5C39F788))... 0x0109=>1
V/xt9input_alpha( 573): alpha_hasLdb(context(0x5C39F788))...
V/xt9input_dbregistry( 573): DBRegistry::get_ldb_path(0x0109)...LG_902_r1-16_ENubUN_xt9_ALM.ldb
V/xt9input_alpha( 573): alpha_hasLdb(context(0x5C39F788))... 0x0109=>1
D/LGPhoneStatusBarPolicy( 483): ACTION_SIGNAL_STRENGTH_CHANGED!!!
I/SIMContacts( 972): Dialog|onSavedInstanceState()falsefalsefalse
I/LGE_CallLogFragment( 972): [moo] onStop()
I/LGE_CallLogFragment( 972): [moo] updateOnExit()
D/wpa_supplicant( 470): nl80211: survey data missing!
D/ViewRootImpl( 1965): ViewRoot TouchDown(Absolute) DOWN (369 , 128)
I/AudioService( 350): checkPlayConditions streamType:1 mMode:0 mRingerMode:2 result:true
E/BootLoader Unlock( 1965): swrv_fused_status=16
E/BootLoader Unlock( 1965): readNV(36): 16
D/LvOutput( 146): initCheck: 0
D/LvOutput( 146): attachEffects: attach processing to output 2, stream 1, session 58, mode 0
D/LvOutput( 146): attachEffects: no output processing needs to be attached to this stream
W/MemoryDealer( 146): madvise(0x43b3e000, 8192, MADV_REMOVE) returned Operation not supported on transport endpoint
D/AudioResampler( 146): forcing AudioResampler quality to 3
D/SurfaceFlinger( 143): createSurface for (1 x 1), name=com.lge.hiddenmenu/com.lge.hiddenmenu.bootloadunlock.BootLoader_Unlock
D/KeyguardViewMediator( 350): handleTimeout
D/LvOutput( 146): initCheck: 0
D/LvOutput( 146): detachEffects: detach processing for output 2, stream 1, session 58
D/LvOutput( 146): detachEffects: no output processing was attached to this stream
D/LGPhoneStatusBarPolicy( 483): ACTION_SIGNAL_STRENGTH_CHANGED!!!
D/ViewRootImpl( 1965): ViewRoot TouchDown(Absolute) DOWN (336 , 557)
I/AudioService( 350): checkPlayConditions streamType:1 mMode:0 mRingerMode:2 result:true
D/LvOutput( 146): initCheck: 0
D/LvOutput( 146): attachEffects: attach processing to output 2, stream 1, session 59, mode 0
D/LvOutput( 146): attachEffects: no output processing needs to be attached to this stream
W/MemoryDealer( 146): madvise(0x43b3a000, 12288, MADV_REMOVE) returned Operation not supported on transport endpoint
D/AudioResampler( 146): forcing AudioResampler quality to 3
W/InputMethodManagerService( 350): Window already focused, ignoring focus gain of: [email protected] attribute=null, token = [email protected]
D/LvOutput( 146): initCheck: 0
D/LvOutput( 146): detachEffects: detach processing for output 2, stream 1, session 59
D/LvOutput( 146): detachEffects: no output processing was attached to this stream
D/wpa_supplicant( 470): nl80211: survey data missing!
D/LGPhoneStatusBarPolicy( 483): ACTION_SIGNAL_STRENGTH_CHANGED!!!
Maybe looking into com.lge.hiddenmenu/com.lge.hiddenmenu.bootloadunlock.BootLoader_Unlock can give us more information about the bootloader unlocking, since this process is able to know if the bootloader is unlocked or not
They've actually have dug deeper than that.
Have you seen this thread?
http://forum.xda-developers.com/showthread.php?t=2374554
Might be some stuff your interested in
sent from my locked rooted P769 v20f
I'm on YouTube (BioDesigner48)
BioDesigner48 said:
They've actually have dug deeper than that.
Have you seen this thread?
http://forum.xda-developers.com/showthread.php?t=2374554
Might be some stuff your interested in
sent from my locked rooted P769 v20f
I'm on YouTube (BioDesigner48)
Click to expand...
Click to collapse
I've already seen. I think my help wasnt needed, im not experienced like they are, in fact im not a dev, i just found that and thought that could help them
shucrut said:
I've already seen. I think my help wasnt needed, im not experienced like they are, in fact im not a dev, i just found that and thought that could help them
Click to expand...
Click to collapse
Ayee, the more help the better :thumbup:
sent from my locked rooted P769 v20f
I'm on YouTube (BioDesigner48)
BioDesigner48 said:
@omgbossis21 you should take a look at this...
sent from my locked rooted P769 v20f
I'm on YouTube (BioDesigner48)
Click to expand...
Click to collapse
All that is for custom uboot/uboot mods. The uboot partition among many others are signed by LG and checked, hence a locked bootloader. For that reason we can't boot from a modified partition be it x, recovery, boot etc. I have tried many different things from flashing unlockable (signed) partitions,optimus 3d leaked sign tools, unlock command from loaded kernel without system boot etc etc. Unfortunately my ram in my PC is dying so I can barely scroll through disassembled files or even build paranoid android in Ubuntu for the time being.
Sent from my LG-P769 using xda app-developers app
---------- Post added at 09:24 PM ---------- Previous post was at 09:18 PM ----------
shucrut said:
Well, maybe its nothing, but i logcat when i went to check bootloader lock menu (http://forum.xda-developers.com/showthread.php?t=2394274)
Code:
V/xt9input_alpha( 573): alpha_setAttribute(context(5C39F788))...success
V/xt9input_alpha( 573): alpha_hasLdb(context(0x5C39F788))...
V/xt9input_dbregistry( 573): DBRegistry::get_ldb_path(0x0109)...LG_902_r1-16_ENubUN_xt9_ALM.ldb
V/xt9input_alpha( 573): alpha_hasLdb(context(0x5C39F788))... 0x0109=>1
V/xt9input_alpha( 573): alpha_hasLdb(context(0x5C39F788))...
V/xt9input_dbregistry( 573): DBRegistry::get_ldb_path(0x0109)...LG_902_r1-16_ENubUN_xt9_ALM.ldb
V/xt9input_alpha( 573): alpha_hasLdb(context(0x5C39F788))... 0x0109=>1
V/xt9input_alpha( 573): alpha_hasLdb(context(0x5C39F788))...
V/xt9input_dbregistry( 573): DBRegistry::get_ldb_path(0x0109)...LG_902_r1-16_ENubUN_xt9_ALM.ldb
V/xt9input_alpha( 573): alpha_hasLdb(context(0x5C39F788))... 0x0109=>1
D/LGPhoneStatusBarPolicy( 483): ACTION_SIGNAL_STRENGTH_CHANGED!!!
I/SIMContacts( 972): Dialog|onSavedInstanceState()falsefalsefalse
I/LGE_CallLogFragment( 972): [moo] onStop()
I/LGE_CallLogFragment( 972): [moo] updateOnExit()
D/wpa_supplicant( 470): nl80211: survey data missing!
D/ViewRootImpl( 1965): ViewRoot TouchDown(Absolute) DOWN (369 , 128)
I/AudioService( 350): checkPlayConditions streamType:1 mMode:0 mRingerMode:2 result:true
E/BootLoader Unlock( 1965): swrv_fused_status=16
E/BootLoader Unlock( 1965): readNV(36): 16
D/LvOutput( 146): initCheck: 0
D/LvOutput( 146): attachEffects: attach processing to output 2, stream 1, session 58, mode 0
D/LvOutput( 146): attachEffects: no output processing needs to be attached to this stream
W/MemoryDealer( 146): madvise(0x43b3e000, 8192, MADV_REMOVE) returned Operation not supported on transport endpoint
D/AudioResampler( 146): forcing AudioResampler quality to 3
D/SurfaceFlinger( 143): createSurface for (1 x 1), name=com.lge.hiddenmenu/com.lge.hiddenmenu.bootloadunlock.BootLoader_Unlock
D/KeyguardViewMediator( 350): handleTimeout
D/LvOutput( 146): initCheck: 0
D/LvOutput( 146): detachEffects: detach processing for output 2, stream 1, session 58
D/LvOutput( 146): detachEffects: no output processing was attached to this stream
D/LGPhoneStatusBarPolicy( 483): ACTION_SIGNAL_STRENGTH_CHANGED!!!
D/ViewRootImpl( 1965): ViewRoot TouchDown(Absolute) DOWN (336 , 557)
I/AudioService( 350): checkPlayConditions streamType:1 mMode:0 mRingerMode:2 result:true
D/LvOutput( 146): initCheck: 0
D/LvOutput( 146): attachEffects: attach processing to output 2, stream 1, session 59, mode 0
D/LvOutput( 146): attachEffects: no output processing needs to be attached to this stream
W/MemoryDealer( 146): madvise(0x43b3a000, 12288, MADV_REMOVE) returned Operation not supported on transport endpoint
D/AudioResampler( 146): forcing AudioResampler quality to 3
W/InputMethodManagerService( 350): Window already focused, ignoring focus gain of: [email protected] attribute=null, token = [email protected]
D/LvOutput( 146): initCheck: 0
D/LvOutput( 146): detachEffects: detach processing for output 2, stream 1, session 59
D/LvOutput( 146): detachEffects: no output processing was attached to this stream
D/wpa_supplicant( 470): nl80211: survey data missing!
D/LGPhoneStatusBarPolicy( 483): ACTION_SIGNAL_STRENGTH_CHANGED!!!
Maybe looking into com.lge.hiddenmenu/com.lge.hiddenmenu.bootloadunlock.BootLoader_Unlock can give us more information about the bootloader unlocking, since this process is able to know if the bootloader is unlocked or not
Click to expand...
Click to collapse
Actually I wish you had posted this in the other thread any logcat bootloader related is helpful. Tomorrow I will add this to my list of notes. Can you share your l9 variant/software version from this logcat?
Sent from my LG-P769 using xda app-developers app
omgbossis21 said:
All that is for custom uboot/uboot mods. The uboot partition among many others are signed by LG and checked, hence a locked bootloader. For that reason we can't boot from a modified partition be it x, recovery, boot etc. I have tried many different things from flashing unlockable (signed) partitions,optimus 3d leaked sign tools, unlock command from loaded kernel without system boot etc etc. Unfortunately my ram in my PC is dying so I can barely scroll through disassembled files or even build paranoid android in Ubuntu for the time being.
Sent from my LG-P769 using xda app-developers app
---------- Post added at 09:24 PM ---------- Previous post was at 09:18 PM ----------
Actually I wish you had posted this in the other thread any logcat bootloader related is helpful. Tomorrow I will add this to my list of notes. Can you share your l9 variant/software version from this logcat?
Sent from my LG-P769 using xda app-developers app
Click to expand...
Click to collapse
I'm not sure what variant he has but I'm definitely sure he's on v20b EU. Since he told me he reflashed it.
Sent from my LG-P769 using Tapatalk 4
My variant is P768 and i was on V20B europe open
Please post your log in the bootloader thread under development that's goin on. I don't want to lose sight of this and would like lelus to see it. My PC is down and can't copy and paste from this app (at least not that log) .
Sent from my LG-P769 using xda app-developers app
Hi all,
I am using modpunks CM 12.1 on my G850F.
Working very nice. Now I get the following problem(s):
Random freezes, if I get freezings, very regular I cannot switch on the phone instantly. It's draining battery but I cannot boot it (no samsung logo...) nor I cannot boot into recovery. Only download mode works sometimes.
The SAME happens with stock ROM. Tried the "old" frenche XEF version, the "new" one from late november and the one the phone was initially delivered with.
To me it seems kind of if there is either a memory problem OR a CPU problem especially as I only get this problems when using the phone. so I can keep it in my pocket and it works.
Do you have other ideas howto narrow the problem down? Up to now there is no clear variant how to reproduce this behavior. but it happens now very often and EVEN when restoring CM from recovery once.
Best and thanks for your ideas and help,
Blubberor
I would suggest testing with some benchmark app. If it crashes take notice when it did. If not make a clean flash with odin with repertition ticked ON and see if it repeats the error.
Sent from my P6-U06
Same issue
Hi. I have the same issue with my Alpha. Official room, tried to reset several times with no result. It gets hot and then freezes. A friend of mine has same phone and OS version, no freezes encountered. Waiting for an update from Samsung.
Blubberor said:
Hi all,
I am using modpunks CM 12.1 on my G850F.
Working very nice. Now I get the following problem(s):
Random freezes, if I get freezings, very regular I cannot switch on the phone instantly. It's draining battery but I cannot boot it (no samsung logo...) nor I cannot boot into recovery. Only download mode works sometimes.
The SAME happens with stock ROM. Tried the "old" frenche XEF version, the "new" one from late november and the one the phone was initially delivered with.
To me it seems kind of if there is either a memory problem OR a CPU problem especially as I only get this problems when using the phone. so I can keep it in my pocket and it works.
Do you have other ideas howto narrow the problem down? Up to now there is no clear variant how to reproduce this behavior. but it happens now very often and EVEN when restoring CM from recovery once.
Best and thanks for your ideas and help,
Blubberor
Click to expand...
Click to collapse
flc555 said:
Hi. I have the same issue with my Alpha. Official room, tried to reset several times with no result. It gets hot and then freezes. A friend of mine has same phone and OS version, no freezes encountered. Waiting for an update from Samsung.
Click to expand...
Click to collapse
my wife as well.
although I have to admit, mine had to go 3 times to Samsung CSC, while hers is just working fine.
This is just a strange happening.
will do two things. soon.
Complete erase of all files.
Will open the phone to check if I see something strange...
In case I can get it back to work I will report back.
Best,
Blubberor
Why is it no matter what i post on XDA people just ignore it wut
now its official.
Odin was not able to repartition only regular flashing..., while completely opening in the end the display broke.
so I loved this phone, but as it made problems all over the time (even before testing and using CM (thx @modpunk ones again!!!)) won't stick to samsung.
now first use the good old nexus 4....
best and thanks to all from the samsung alpha area here on xda!!
was lucky...had the phone connected to adb and logcat was running when it crashed.
maybe someone can have a look. to me there is nothing strange on the system going on...
I have checked with E2FSCK memory and integrity of SYSTEM, DATA, EFS....partition without any strange error reports..
I was wondering if one can fully check the whole memory to exclude just bad blocks.
right now the phone was just charging when I unlocked screen and was starting logcat---
Code:
01-03 16:25:04.882 10126 10126 W GAv4 : AnalyticsReceiver is not registered or is disabled. Register the receiver for reliable dispatching on non-Google Play devices. See http://goo.gl/8Rd3yj for instructions.
01-03 16:25:04.886 10126 10126 W GAv4 : CampaignTrackingReceiver is not registered, not exported or is disabled. Installation campaign tracking is not possible. See http://goo.gl/8Rd3yj for instructions.
01-03 16:25:04.891 10126 10163 W GAv4 : AnalyticsService not registered in the app manifest. Hits might not be delivered reliably. See http://goo.gl/8Rd3yj for instructions.
01-03 16:25:04.990 2865 5470 I ActivityManager: Start proc 10164:com.estrongs.android.pop/u0a160 for broadcast com.estrongs.android.pop/.app.StartServiceReceiver
01-03 16:25:05.003 2865 3167 I ActivityManager: Killing 9510:com.android.deskclock/u0a39 (adj 15): empty #17
01-03 16:25:05.264 2457 2457 D gpsd : WakeLock(Acquire,GPSD)
01-03 16:25:05.264 2457 2457 D gpsd : WakeLock(Release,GPSD)
01-03 16:25:05.277 2865 3106 D WifiService: releaseWifiLockLocked: WifiLock{NlpWifiLock type=2 [email protected]}
01-03 16:25:05.361 3066 10110 I SecHAL : device_sleep: NFC can be going to sleep
01-03 16:25:05.405 4517 4630 I GCoreUlr: Successfully inserted 3 locations
01-03 16:25:05.409 4517 4630 I GCoreUlr: Starting service, intent=Intent { act=com.google.android.location.reporting.UPLOAD cmp=com.google.android.gms/com.google.android.location.reporting.service.DispatchingService }, extras=null
01-03 16:25:05.416 10164 10184 W ResourceType: No package identifier when getting value for resource number 0x00000000
01-03 16:25:05.421 2865 2979 D WifiService: New client listening to asynchronous messages
01-03 16:25:05.495 2865 3622 I ActivityManager: Killing 8291:com.cyanogenmod.lockclock/u0a53 (adj 15): empty #17
01-03 16:25:05.893 4517 10195 W BaseAppContext: Using Auth Proxy for data requests.
01-03 16:25:05.917 4517 4517 V GLSActivity: AuthDelegateWrapperCreated with selected intent: Intent { cmp=com.google.android.gms/.auth.DefaultAuthDelegateService }
01-03 16:25:05.925 4517 4517 V GLSActivity: AuthDelegateWrapperCreated with selected intent: Intent { cmp=com.google.android.gms/.auth.DefaultAuthDelegateService }
01-03 16:25:06.218 4517 4525 E DataBuffer: Internal data leak within a DataBuffer object detected! Be sure to explicitly call release() on all DataBuffer extending objects when you are done with them. (internal object: [email protected])
01-03 16:25:06.220 4517 4525 E DataBuffer: Internal data leak within a DataBuffer object detected! Be sure to explicitly call release() on all DataBuffer extending objects when you are done with them. (internal object: [email protected])
01-03 16:25:06.222 4517 4525 E DataBuffer: Internal data leak within a DataBuffer object detected! Be sure to explicitly call release() on all DataBuffer extending objects when you are done with them. (internal object: [email protected])
01-03 16:25:06.224 4517 4525 E DataBuffer: Internal data leak within a DataBuffer object detected! Be sure to explicitly call release() on all DataBuffer extending objects when you are done with them. (internal object: [email protected])
01-03 16:25:06.226 4517 4525 E DataBuffer: Internal data leak within a DataBuffer object detected! Be sure to explicitly call release() on all DataBuffer extending objects when you are done with them. (internal object: [email protected])
01-03 16:25:06.255 2865 5101 D NetlinkSocketObserver: NeighborEvent{elapsedMs=382899, fd00::9ec7:a6ff:fe12:55e6, [9CC7A61255E6], RTM_NEWNEIGH, NUD_REACHABLE}
01-03 16:25:06.705 2865 2980 D ConnectivityService: notifyType CAP_CHANGED for NetworkAgentInfo [WIFI () - 100]
01-03 16:25:06.730 4517 10195 I GCoreUlr: Batch Location Update succeeded for account account#-16#
01-03 16:25:06.767 4517 10195 I GCoreUlr: Upload task finished
01-03 16:25:06.770 2865 2876 W AppOps : Finishing op nesting under-run: uid 10012 pkg com.google.android.gms code 40 time=1451834705429 duration=97 nesting=0
01-03 16:25:06.819 2451 2899 V audio_hw_primary: do_out_standby: output standby: 0
01-03 16:25:06.877 3012 3012 D PhoneStatusBar: disable: < expand ICONS* alerts SYSTEM_INFO* back home recent clock search quick_settings >
01-03 16:25:08.695 2451 2899 V audio_hw_primary: out_set_parameters: key value pairs: routing=2
01-03 16:25:08.698 9786 9786 W System : ClassLoader referenced unknown path: /system/framework/tcmclient.jar
01-03 16:25:08.706 2451 2899 V audio_hw_primary: start_output_stream: starting stream
01-03 16:25:08.709 2451 2899 V audio_hw_primary: *** select_devices: Routing hasn't changed, leaving function.
01-03 16:25:08.709 2451 2899 V audio_hw_primary: start_output_stream: stream out device: 2, actual: 2
Blubberor said:
was lucky...had the phone connected to adb and logcat was running when it crashed.
maybe someone can have a look. to me there is nothing strange on the system going on...
I have checked with E2FSCK memory and integrity of SYSTEM, DATA, EFS....partition without any strange error reports..
I was wondering if one can fully check the whole memory to exclude just bad blocks.
right now the phone was just charging when I unlocked screen and was starting logcat---
Code:
01-03 16:25:04.882 10126 10126 W GAv4 : AnalyticsReceiver is not registerэ...
Click to expand...
Click to collapse
I'll help you. Turn the unlocking fingerprint.
What does this mean exactly?
Still have freezings. Kind of desperate how to brick the device..
Sent from my Nexus 4 using XDA Free mobile app
Turn off unlocking fingerprint.
Volks.com.ua said:
Turn off unlocking fingerprint.
Click to expand...
Click to collapse
would even be not supported in CM13 so there is no option I guess.
Thanks already - fingerprint was already exchanged and broken again bei CSP some months ago....
Best,
Blubberor
Hi! My cellphone has the same problem. Please, let me know if you could solve it.
Thanks,
Pablo
pablitolandia said:
Hi! My cellphone has the same problem. Please, let me know if you could solve it.
Thanks,
Pablo
Click to expand...
Click to collapse
Unfortunately could not solve it.
No errors in file checks, efs restored....Samsung refused warranaty due to Knox. Today a used alpha that I bought is going to arrive.
Good luck.
Blubberor
Sent from my Nexus 4 using XDA Free mobile app
Hi all, a quick fix that worked for me was to use another launcher.
nickps17 said:
Hi all, a quick fix that worked for me was to use another launcher.
Click to expand...
Click to collapse
To me happened with Stock as well as with cm.
Crossing the fingers for you.
Sent from my SM-G850F using XDA Free mobile app