Hello,
Today my RAZR fell down from a quite high distance and the screen (just glass) is cracked... The phone, however, responds to every touch and all the images are displayed correctly. I've got some questions: What is necessary to buy to repair that glass? Do I have to buy the lens with LCD, with digitizer or flex cable...? I don't know anything about this... Are these cheaply-priced products on ebay fake or original?? e.g. ebay.com/itm/Touch-Screen-Digitizer-Glass-Lens-For-Motorola-Spyder-Droid-RAZR-XT910-XT912-/171035206060?pt=LH_DefaultDomain_0&var=&hash=item27d27e21ac
Here is the present image of my phone: img191.imageshack.us/img191/1416/dsc01263ho.jpg
Thank you in advance!
Related
hi
I have some scratchs on my screen and I am looking for a replacement digtizer.
I found several on ebay,
http://shop.ebay.com/i.html?_nkw=xp...+screen&_osacat=0&_trksid=p3286.c0.m270.l1313
Have anyone replaced the digitizer or know if this are original?
Thanks!
Did you remove the factory screen protector for some reason and not replace it? Or did your phone not come with a factory screen protector?
ClintonH said:
Did you remove the factory screen protector for some reason and not replace it? Or did your phone not come with a factory screen protector?
Click to expand...
Click to collapse
Hi
I removed the factory screen protector. when I got a couple of scratches I applied a new protector.
But the few scratches I have are ittitating me!!!!
Hi, I recently changed my digitizer. Put on a black one on my white phone. They are all real, I have not seen any fakes around. I also bought mine off of ebay.
--duplicate--
I wish one of these ebay listings gave a part number or model number for the digitizer... for obvious reasons.
trojjanhorse said:
Hi, I recently changed my digitizer. Put on a black one on my white phone. They are all real, I have not seen any fakes around. I also bought mine off of ebay.
Click to expand...
Click to collapse
Is this digitizer is the same part i need to change when my screen gets cracked ?
The story is my phone fell down and the screen got cracked and kinda ink appeared around the line of crack..
I was really wandering which part to change since the touch was working fine..
sent from my x10i that is banging for a 2.1 upgrade. ...
mezo9090 said:
Is this digitizer is the same part i need to change when my screen gets cracked ?
The story is my phone fell down and the screen got cracked and kinda ink appeared around the line of crack..
I was really wandering which part to change since the touch was working fine..
sent from my x10i that is banging for a 2.1 upgrade. ...
Click to expand...
Click to collapse
Hey Mezo,
The digitizer is factory glued with the top glass and is considered one piece since you can't separate the two. The LCD is separate from the digitizer. If your LCD is cracked, then your display will be distorted with lines across the screen. If your top glass is cracked, then your digitizer will still work since the digitizer is not as fragile as the top glass. So the question is, is the top glass cracked? Is the LCD display cracked as well? I know your digitizer will still be functioning but you might want to consider buying a new one as for the cracks may be unappealing and annoying.
I simply broke the top glass and I did not like the crack spanning across my screen so I got myself a new one.
If your LCD is damaged then you need to buy a new LCD which is not cheap... (over $100).
@trojjanhorse
the top layer which i touch is functional, so that means i have broken the LCD ?
i appreciate if you have a look on them i attached some pic, i hope they are clear enough since i took them with 3mp cam
thanks for the help in advance, i don't know much about mobile displays
mezo9090 said:
@trojjanhorse
the top layer which i touch is functional, so that means i have broken the LCD ?
i appreciate if you have a look on them i attached some pic, i hope they are clear enough since i took them with 3mp cam
thanks for the help in advance, i don't know much about mobile displays
Click to expand...
Click to collapse
Most likely you have broken the LCD. When dark pixels appear like that, it usually means that you've directly struck the LCD itself and damaged that area.
It was a thin line at first then some Ink started to flow and became bigger the next day.
So its the LCD?
should I fix it at the service center or i can replace it myself?
sent from my x10i that is banging for a 2.1 upgrade. ...
You can, in theory, fix it yourself but it'll be a biatch of a job. Use the X10 undressing post to find out how to actually take it to bits...
Then put the new LCD in.
only issue is finding somewhere that sells them... I don't know if they're a generic 854x480 lcd or what so...
To change LCD is very simple, but to change the digitizer is suicide. You will need to get a new LCD. I would buy one off of ebay and install it myself. I've been fixing phones for 2 years now so I had my share of experience but it may be difficult for you. The black liquid is due to the fact that LCD stands for "Liquid" Crystal Display
Good luck.
My Nokia Lumia 920 Glass shattered after it was dropped from 2.5 feet, it landed on the glass and shattered, the touch is working fine and the display is also fine, no leaks and displays everything properly. When I took the phone to Nokia Care they informed that the whole glass, digitizer and LCD has to be changed even though the latter two were working fine and asked me around Rs.15000 (approx 280 USD) to fix it. Is it possible just to replace the glass. I recently ordered a digitizer in ebay and it was shown with glass and when I received the package it just had the digitizer without the glass and it didnt look like OEM at all. Am planning just to order the glass and use my existing Nokia digitizer that came with the phone if there is a way to separate the digitizer and shattered glass. Please let me know what I will require to fix.
theonlyremedy said:
My Nokia Lumia 920 Glass shattered after it was dropped from 2.5 feet, it landed on the glass and shattered, the touch is working fine and the display is also fine, no leaks and displays everything properly. When I took the phone to Nokia Care they informed that the whole glass, digitizer and LCD has to be changed even though the latter two were working fine and asked me around Rs.15000 (approx 280 USD) to fix it. Is it possible just to replace the glass. I recently ordered a digitizer in ebay and it was shown with glass and when I received the package it just had the digitizer without the glass and it didnt look like OEM at all. Am planning just to order the glass and use my existing Nokia digitizer that came with the phone if there is a way to separate the digitizer and shattered glass. Please let me know what I will require to fix.
Click to expand...
Click to collapse
I broke mine recently too and after calling several local phone repair places (got similar quotes), I was convinced that the best bet was to order the whole screen assembly (including the LCD, digitizer and flexible key ribbon) and then do it myself. the assembly cost me just under $100 and was easy to replace with the help of the video on ifixit (here).
You can do just the digitizer, but its risky. The digitizer (the glass) is adheared to the LCD screen, and as I learned with my HD2, its very easy to ruin the LCD when separating the two. Within the guide posted above, there is a seperate guide for doing this (the link appears at about the 17:50 mark), you just have to be very very careful.
One last tip! The flex ribbon for the volume, power, and camera keys is very fragile and can easily tear when you're assembling/disassembling. I ended up ruining the original one when disassembling, then despite being extra careful, ruined the one on the new screen when reassembling, then had to wait a week for another new ribbon that I ordered off ebay. Watch out for the little plastic nub on the inside of the casing by the camera button. It sticks straight out towards the key ribbon and cuts it like a knife. That's what ended up tearing mine both times.
Good luck!
Hamburg said:
I broke mine recently too and after calling several local phone repair places (got similar quotes), I was convinced that the best bet was to order the whole screen assembly (including the LCD, digitizer and flexible key ribbon) and then do it myself. the assembly cost me just under $100 and was easy to replace with the help of the video on ifixit (here).
You can do just the digitizer, but its risky. The digitizer (the glass) is adheared to the LCD screen, and as I learned with my HD2, its very easy to ruin the LCD when separating the two. Within the guide posted above, there is a seperate guide for doing this (the link appears at about the 17:50 mark), you just have to be very very careful.
One last tip! The flex ribbon for the volume, power, and camera keys is very fragile and can easily tear when you're assembling/disassembling. I ended up ruining the original one when disassembling, then despite being extra careful, ruined the one on the new screen when reassembling, then had to wait a week for another new ribbon that I ordered off ebay. Watch out for the little plastic nub on the inside of the casing by the camera button. It sticks straight out towards the key ribbon and cuts it like a knife. That's what ended up tearing mine both times.
Good luck!
Click to expand...
Click to collapse
XDA doesn't have a specific forum for the 1520 and XDA needs one. I bought my wife a 1520 and dropped it the first day (slippery case). Broke the glass in two corners and really doesn't effect anything and you can barely see the cracks. But, I too would like to replace it. Haven't tried to get an estimate and I am very capable of replacing myself. I have the insurance but that will cost $200.
Ideas or suggestions, other than don't drop your phone!
i recently dropped my phone and it got a crack in the bottom right corner around the back button stretching up to the middle of the left hand side of the screen, and i need help repairing it.
Im not sure if i can just replace the glass myself or i need to replace the digitizer or any other parts as the screen and back button still work perfectly fine.
I'd also like to know whether this job is easy enough to do at home as i am on a low budget, however i dont have much experience fixing phones.
much appreciated if anyone can help me
Replace the screen assembly, glass plus digitiser and oled screen. Trying to unglue the glass is very hard and the heat can kill the phone.
boomboomer said:
Replace the screen assembly, glass plus digitiser and oled screen. Trying to unglue the glass is very hard and the heat can kill the phone.
Click to expand...
Click to collapse
Replacing the whole digitiser is a lot easier, but beware cheap(ish) ebay parts - I replaced my digitiser with an assembly from ebay, but the glass in the replacement broke very easily.... replaced it again and it's cracked again, without even having a hard knock. Nowehere near as sturdy as OEM parts. Screen still works so leaving it for now
Words of warning...
I attempted to replace the glass on my S3 after I dropped it. I have over 20 years experience as a computer engineer and access to loads of tools. I watched numerous YouTube videos on the process before I started yet still I managed to break the digitiser. In the end I bit the bullet and bought another brand new S3 for £200. The cheapo replacement glass I bought from eBay did not seem very sturdy either - I'm certain it's not gorilla glass. My advice would be to get it fixed professionally by someone who uses OEM parts but then again, how close in price would that be to a brand new phone?
Hi Guys,
i think the most of you know, that the Z2 has a really poor glass quality. (My phone fell down from about 30 CM to a carpet and the screen had a little crack and the touchscreen didn't work. (Insurance of my friend payed for this, because he has thrown it down)
The costs for the repair were 200 €!
Now i found this on ebay: http://www.ebay.de/itm/Orig-Sony-XP...zer_Ersatzteile_Werkzeuge&hash=item3a9f2231e3
It was sold 53 times, but i thought you can't replace only the glass?
Or is it possible?
No, dont try it, I already bought one of them but at the end I experienced that the glass and lcd display is sticked to each other and not seperable.
I had to buy another one with lcd+glass and was able to fix.
They are selling but its a fault, we do not have factories to combine those glasses with lcd. They are cheating, be careful.
It‘s a incell screen so can't be separated
Glass and screen are seperate on Z2 from what i saw when i disasembled my phone.
Envious_Data said:
Glass and screen are seperate on Z2 from what i saw when i disasembled my phone.
Click to expand...
Click to collapse
On my D6503 glass/digitizer/lcd was glued together. Changed display recently because of a tiny fall.
But atleast its fairly easy to change.
Phone was dropped today. The touchscreen no longer works and the screen is cracked. There is also what looks like a black liquid from the LCD. I therefore believe I must replace the LCD, digitiser and glass screen. I was just wondering where the best place to buy them from as I feel like I should avoid AliExpress and others alike. Although I dont want to spend to much.
Do all 3 come in one unit? For example if I get an OEM Screen Replacement for the S9, it will include LCD, digitiser and glass screen?
Thanks, all help is appreciated
I just checked over at Samsung. For the S9+ screen and digitizer $229. I did a guick search and found some for a low as $169.. Best to go OEM if you ask me, especially if you plan on keeping it for a while, and want it to work correctly.
Aftermarket frame and screen setups are rarely OEM quality. despite most of the claims. I would only buy samsung direct