Related
I am not new to any of this, but I am having a problem. VZW is sending me an Incredible, so I need to unroot. I used 2 different methods, both of which failed. Can someone please give me a hand or link me to some other options?
These are the methods I have tried:
http://forum.xda-developers.com/showthread.php?p=8315870
and
http://www.droid-eris.com/tutorials-corner/%28tutorial%29-how-to-unroot-your-droid-eris/
Perhaps you could state what problem you experienced when you tried using the Flashback21 ROM; the only thing that it requires is the Amon_RA recovery (Clockwork is not supported). Other than that, it should flash like any other ROM.
You might also want to mention what the exact bootloader version you have on your phone, whether or not you can use your trackball (for up/down/press actions) without too much trouble.
bftb0
bftb0 said:
Perhaps you could state what problem you experienced when you tried using the Flashback21 ROM; the only thing that it requires is the Amon_RA recovery (Clockwork is not supported). Other than that, it should flash like any other ROM.
You might also want to mention what the exact bootloader version you have on your phone, whether or not you can use your trackball (for up/down/press actions) without too much trouble.
bftb0
Click to expand...
Click to collapse
I was thinking the same thing, how can one help with that little info
btw bftb0, thank you for all the help with the uber technical issues around here. Your knowledge is very much appreciated, yeah I'll say it, thank you bftb0
I do have amon-ra recovery. When I flashed it aborted. The error message states a corrupt file. My phone is rebooting now. I am going to reflash to tell you the exact corrupt file. Give me a minute?
escalavee said:
I do have amon-ra recovery. When I flashed it aborted. The error message states a corrupt file. My phone is rebooting now. I am going to reflash to tell you the exact corrupt file. Give me a minute?
Click to expand...
Click to collapse
Did you try re-downloading the file at all?
E: corrupt file: system/framework/com.htc.resources.apk
E: verification failed.
I am redownloading now. I thought of that a few minutes ago.
Yes, I have full use of the track ball. I don't know what bootloader version I have, and it is rebooting again, so I can't check right now...
Thank you for trying to help!
ETA: HBOOT v 1.49
recovery v 1.6.2
radio 2.42.01.04.27
escalavee said:
E: corrupt file: system/framework/com.htc.resources.apk
E: verification failed.
I am redownloading now. I thought of that a few minutes ago.
Yes, I have full use of the track ball. I don't know what bootloader version I have, and it is rebooting again, so I can't check right now...
Thank you for trying to help!
ETA: HBOOT v 1.49
recovery v 1.6.2
radio 2.42.01.04.27
Click to expand...
Click to collapse
If it doesn't work this time, download it with a different web browser.
gnarlyc said:
If it doesn't work this time, download it with a different web browser.
Click to expand...
Click to collapse
Will do. Thanks.
What happened? I can't access the page now to redownload...
I said screw it and tried to open it with IE, and I got a 404.
Nevermind. I got it. Durf.
escalavee said:
I do have amon-ra recovery. When I flashed it aborted. The error message states a corrupt file. My phone is rebooting now. I am going to reflash to tell you the exact corrupt file. Give me a minute?
Click to expand...
Click to collapse
bad download or you corrupted it when you transfered it from your pc.
Use AFV the from the market to verify the checksum of the zip file on the SD card.
When you transfer large files from the PC you always always need to perform a "safely remove hardware" before you unmount from the Eris or remove the USB cable.
bftb0 said:
bad download or you corrupted it when you transfered it from your pc.
Use AFV the from the market to verify the checksum of the zip file on the SD card.
When you transfer large files from the PC you always always need to perform a "safely remove hardware" before you unmount from the Eris or remove the USB cable.
Click to expand...
Click to collapse
Good to know! Thanks. I will try again and let you guys know.
Again, I really appreciate all the help.
workshed said:
btw bftb0, thank you for all the help with the uber technical issues around here. Your knowledge is very much appreciated, yeah I'll say it, thank you bftb0
Click to expand...
Click to collapse
+1 bftb0 helped me figure out my first bricked eris was fubar, more importantly helped me understand why, so the next time I had a soft brick I had taken the preemptive steps necessary to save it. Thanks bftb0
This is making me crazy!
Another corrupt file: system/framework/framework.odex
I did safely remove hardware, and this download was done on IE instead of FF.
I am going to keep trying until I get this done.
USSENTERNCC1701E said:
+1 bftb0 helped me figure out my first bricked eris was fubar, more importantly helped me understand why, so the next time I had a soft brick I had taken the preemptive steps necessary to save it. Thanks bftb0
Click to expand...
Click to collapse
Hey I saw the post about the thanks cherry... that made me giggle on the inside a little...
ETA: I am a dirty lurker...
Try flashing a different custom ROM, possible your recovery has become corrupted. If flashing another ROM doesn't work reinstall AmonRA and try FlashBack again. If it does work, I'd try FlashBack again, just for ****s and giggles.
Hey do I need the radio image? I can try downloading the one without the radio image...
USSENTERNCC1701E said:
Try flashing a different custom ROM, possible your recovery has become corrupted. If flashing another ROM doesn't work reinstall AmonRA and try FlashBack again. If it does work, I'd try FlashBack again, just for ****s and giggles.
Click to expand...
Click to collapse
You know, I tried flashing nonsensikal 15.2 a couple days ago, and I kept getting a corrupt file error with that as well.
Maybe my recovery IS corrupted!
This is insane.
USSENTERNCC1701E said:
Try flashing a different custom ROM, possible your recovery has become corrupted. If flashing another ROM doesn't work reinstall AmonRA and try FlashBack again. If it does work, I'd try FlashBack again, just for ****s and giggles.
Click to expand...
Click to collapse
Do I have to uninstall my old version of amon-ra before I reinstall?
escalavee said:
This is making me crazy!
Another corrupt file: system/framework/framework.odex
I did safely remove hardware, and this download was done on IE instead of FF.
I am going to keep trying until I get this done.
Click to expand...
Click to collapse
Uh, I know you are in a hurry, but ...
It is impossible for Amon_RA to install a corrupted ROM file.
Read that again: It is impossible for Amon_RA to install a corrupted ROM file.
If it passes the verification step in Amon_RA, then the ROM .zip file is OK
Now, if something fails during the install, then there are three possible causes:
- The SD card is flaky, and file reads are erratic (which could allow the verification pass in Amon_RA to succeed, but the subsequent read to fail).
- Prior operations on the phone have corrupted one or more partitions on the phone so that insufficient space remains in the partition you are writing to.
- Flaky hardware.
Does the error with the specific file you mentioned happened during verification or afterwards during the install process?
bftb0
BTW, there are two different "1.49.nnnn" bootloaders - you need to be precise.
escalavee said:
Hey do I need the radio image? I can try downloading the one without the radio image...
Click to expand...
Click to collapse
escalavee said:
Do I have to uninstall my old version of amon-ra before I reinstall?
Click to expand...
Click to collapse
Not unless you have flashed a new radio at some point, and I would recommend avoiding that. I've lost recovery twice, one of the times I was able to just use jcase's 1 Click Eris Root and the other time I had to reflash the recovery, try the 1 Click first, I need to research the procedure for a Terminal Emulator flash again, last time I used FastBoot instead.
Nevermind, I'd follow bftb0, he's far wiser, and I was doing some rather whimsical stuff with my phone and KGB when I lost my recovery.
I am trying to change my wifes rom on her phone and her trackball is broke. So I installed the latest version of CWM to see if it would enable and need features so I could navigate in recovery. No luck and now I can't back up her via rom manager either I just get an error. So what I am wondering is the an alternate way to work through cwm without the trackball and whats up with this error after I updated it. Thanks in advance for your help
The error is e: can't open /cache/update.zip
(Bad)
Installation aborted
Sent from my thunderbolt using XDA Premium App
superdusto said:
The error is e: can't open /cache/update.zip
(Bad)
Installation aborted
Sent from my thunderbolt using XDA Premium App
Click to expand...
Click to collapse
Make sure the backup file has no spaces between anything like backup-4627 not backup 4627 no spaces you'll get an error
Sent from my ERIS using Tapatalk
TheGratefulDead said:
Make sure the backup file has no spaces between anything like backup-4627 not backup 4627 no spaces you'll get an error
Sent from my ERIS using Tapatalk
Click to expand...
Click to collapse
That wasn't the problem just tried and am still getting the same error
Sent from my Thunderbolt using XDA Premium App
superdusto said:
The error is e: can't open /cache/update.zip
(Bad)
Installation aborted
Sent from my thunderbolt using XDA Premium App
Click to expand...
Click to collapse
I believe that this message implies that the download was bad (i.e., and incomplete file or a mis-matched MD5 signature).
I'm not that familiar with ClockworkMod or ROM manager, but have a peek at this thread: http://www.droidforums.net/forum/koush/47399-upgrade-rom-rom-manager-problem.html since it seems to describe what you are seeing.
If you are downloading your first directly to your phone, you can check your MD5 with Astro File Manager (long-press file name, select details, and wait a little bit for the MD5 checksum to appear).
You could also try my app, AFV (Android File Verifier). It has several checksum options, including MD5 and SHA1. You can use its "Verify Jar-type File" to verify the integrity of a signed file even if you don't know the MD5 checksum.
Cheers!
scary alien said:
I believe that this message implies that the download was bad (i.e., and incomplete file or a mis-matched MD5 signature).
I'm not that familiar with ClockworkMod or ROM manager, but have a peek at this thread: http://www.droidforums.net/forum/koush/47399-upgrade-rom-rom-manager-problem.html since it seems to describe what you are seeing.
If you are downloading your first directly to your phone, you can check your MD5 with Astro File Manager (long-press file name, select details, and wait a little bit for the MD5 checksum to appear).
You could also try my app, AFV (Android File Verifier). It has several checksum options, including MD5 and SHA1. You can use its "Verify Jar-type File" to verify the integrity of a signed file even if you don't know the MD5 checksum.
Cheers!
Click to expand...
Click to collapse
I am not downloading a rom I have the rom. So that doesn't help much. Any other ideas? no recovery options that doesn't use track ball?
superdusto said:
I am not downloading a rom I have the rom. So that doesn't help much. Any other ideas? no recovery options that doesn't use track ball?
Click to expand...
Click to collapse
Yeah, sorry...I wasn't exactly sure...
I know that ClockworkMod lets you navigate its menus without using the trackball, but most rooted folks use Amon_RA's custom recovery.
A while back, I created a trackball-optional version of Amon_RA's recovery for the Eris. Here's the thread I created over on AF re. this:
http://androidforums.com/eris-all-things-root/214240-amon_ra-1-6-2-custom-recovery-trackball-not-required.html
Here's the post in RA's thread over here on XDA: http://forum.xda-developers.com/showpost.php?p=9124095&postcount=83
Hope this helps!
Cheers!
Not sure if this helps but I had the same problem when I flashed my friend fascinate. But they use odin to flash their clockwork (voodoo) I had to run the root script then install the rom to fix the update.zip. Any ideas?
superdusto said:
Not sure if this helps but I had the same problem when I flashed my friend fascinate. But they use odin to flash their clockwork (voodoo) I had to run the root script then install the rom to fix the update.zip. Any ideas?
Click to expand...
Click to collapse
lol...sorry, no. I've only heard that Odin (timely Thor-related reference, eh? ) is used for the Samsung phones.
There are others around that know and have used ClockworkMod on the Eris, but they are relatively few and far between (plus, things certainly seem to be slowing down in the various Eris forums recently). There have also been some unexplained brickings of phones using CWM that have scared off potential users of that custom recovery, so most have stayed with and use Amon_RA's.
scary alien said:
lol...sorry, no. I've only heard that Odin (timely Thor-related reference, eh? ) is used for the Samsung phones.
There are others around that know and have used ClockworkMod on the Eris, but they are relatively few and far between (plus, things certainly seem to be slowing down in the various Eris forums recently). There have also been some unexplained brickings of phones using CWM that have scared off potential users of that custom recovery, so most have stayed with and use Amon_RA's.
Click to expand...
Click to collapse
Well thanks for your help so far is their a post on how to set up adb so I can flash Amon_RA. I think my problem is that I rooted with amon and just downloaded rom manager so I put CWM on it.. Must be affecting my update.zip
superdusto said:
Well thanks for your help so far is their a post on how to set up adb so I can flash Amon_RA. I think my problem is that I rooted with amon and just downloaded rom manager so I put CWM on it.. Must be affecting my update.zip
Click to expand...
Click to collapse
Yes, at the bottom of the first post in the AF forum thread are the installation instructions and one of them is how to do it with adb ("Scenario 4").
http://androidforums.com/eris-all-things-root/214240-amon_ra-1-6-2-custom-recovery-trackball-not-required.html
Sounds like you are already familiar with adb, so you should be very close .
Let me know if you need anything else.
Cheers!
You saved me Thank you so much for your time here have some thanks!!!
superdusto said:
You saved me Thank you so much for your time here have some thanks!!!
Click to expand...
Click to collapse
You are most welcome! Glad you got things going .
I keep getting these warm-and-fuzzies from folks that my efforts for building the trackball-optional recovery was well worth it (with kudos and thanks again to RA for his help in filling-in the key gaps in how to build it).
Cheers!
My trackball has not worked pretty much since I bought the phone. I have found is you plug in your usb charger and lift up firmly the trackball works with no issues at all. Just FYI. And here's to the dev's that keep our end of life eris fast and up to date. And no sense thank GOD. lol
Yep, that is a definite way to work it ... I was unable to ROOT for over 2 months after getting my Eris b/c my trackball didn't work. It wasn't until I found this advice over in DF that I was finally able to negotiate the recovery menu.
HOWEVER (!!!) After almost a year of moderate flashing/recovery use, my USB/AC charger barely works anymore. I have to put weight on the USB near the connec w/ the phone to get it to recognize & charge.
I have tried to install the Amon_ra trkball not req script but couldn't get it to work ... I just use CWM these days b/c I don't need to use the damn thing !
Good thing I am coming up for an UPGRADE
Sparticusx said:
My trackball has not worked pretty much since I bought the phone. I have found is you plug in your usb charger and lift up firmly the trackball works with no issues at all. Just FYI. And here's to the dev's that keep our end of life eris fast and up to date. And no sense thank GOD. lol
Click to expand...
Click to collapse
Hey guys, i don't usually make posts for every question i have, unless i absolutely don't find an answer searching or googling. I find myself in the position where i want to customize my Hyperdroid ROM and i can't manage to install DOC's Surgeon.
I think maybe the file i find in AndroidMeda Rom Tool is just an update, and not a full release, but being a noob is difficult, and i really didn't managed to pass this!
So, long story short, how can i flash a surgeon that is on androidmeda rom tool? I tried the Surgeon_Lucid_v5.0.zip and i can't get through, it fails to install under recovery mode.
I would very much appreciate a solution to my dumb question, hope i don't irritate somebody.
mightyvenom said:
Hey guys, i don't usually make posts for every question i have, unless i absolutely don't find an answer searching or googling. I find myself in the position where i want to customize my Hyperdroid ROM and i can't manage to install DOC's Surgeon.
I think maybe the file i find in AndroidMeda Rom Tool is just an update, and not a full release, but being a noob is difficult, and i really didn't managed to pass this!
So, long story short, how can i flash a surgeon that is on androidmeda rom tool? I tried the Surgeon_Lucid_v5.0.zip and i can't get through, it fails to install under recovery mode.
I would very much appreciate a solution to my dumb question, hope i don't irritate somebody.
Click to expand...
Click to collapse
You should download again, and apply the surgeon in the rom tool!
sonyz7 said:
You should download again, and apply the surgeon in the rom tool!
Click to expand...
Click to collapse
I have already done that...
Have you asked on the Hyperdroid thread. I think you may have more luck.
Sent from my GT-I9100
sxi200 said:
Have you asked on the Hyperdroid thread. I think you may have more luck.
Sent from my GT-I9100
Click to expand...
Click to collapse
Unfortunately i can't post there, i don't got the minimum 10 posts...ridiculous i know :-<
Quote from Android system recovery <3e>:
"E: missing bitmap password_retry_45 (Code -1)
E: missing bitmap password_notmatched_45 (Code -1)
E: missing bitmap password_max16_45 (Code -1)"
When installing multi-csc it says the following (also in android system recovery):
"-- Applying Multi-CSC...
Installing Multi-CSC
Can't access to '/system/csc/KOR/system/'.
Successfully applied multi-CSC."
Have you changed the kernel from the one that comes with Hyperdroid? As the OTA tool will only work automatically with the kernel the rom comes with.
If so you will need to download the file via the OTA tool, find where it saves, should be somewhere in the SD card (Hint /sdcard/Hyperdroid_Androidmedia)
Reboot into CWM recovery
Flash the zip manually.
veyka said:
Have you changed the kernel from the one that comes with Hyperdroid? As the OTA tool will only work automatically with the kernel the rom comes with.
If so you will need to download the file via the OTA tool, find where it saves, should be somewhere in the SD card (Hint /sdcard/Hyperdroid_Androidmedia)
Reboot into CWM recovery
Flash the zip manually.
Click to expand...
Click to collapse
Thanks, i will try that right away and report back
mightyvenom said:
Thanks, i will try that right away and report back
Click to expand...
Click to collapse
even if you changed kernels you can still flash stuff that you download from the OTA tool. So say you want to download Docs surgeon. Download it through the OTA app and then rather than apply now press apply later. Then try and get into recovery..there install zip and go through the folder were it says hyperdroid androidmeda...there you have all the files you have downloaded and just flash like you would normally do something...But only use this if you want to change kernels..My advice is the same as the guy above posted..Use the kernel provided by the team and you should not have any problems flashing stuff through the OTA app...
It worked fine, thank you again. Now i figured, indeed the change of my kernel led to that conflict.
Cheers guys!
mightyvenom said:
It worked fine, thank you again. Now i figured, indeed the change of my kernel led to that conflict.
Cheers guys!
Click to expand...
Click to collapse
Huh, I didn't think about you changed the kernel. Pongster's HDK kernel is very good, don't change that in my opinion.
So, Im glad that your problem solved.
Tapatalk
I had twrp 2.6 and extracted boot IMG then fastbooted it then I tried flashing the ROM and gapps and it always said failed before it did anything any ideas I am on 4.3 jellybean at this moment.
Details?
Are you S-Off?
Did you try to re-download or check MD5?
Is this a nightly or M-series you are trying?
swordmastr54 said:
I had twrp 2.6 and extracted boot IMG then fastbooted it then I tried flashing the ROM and gapps and it always said failed before it did anything any ideas I am on 4.3 jellybean at this moment.
Click to expand...
Click to collapse
swordmastr54 said:
I had twrp 2.6 and extracted boot IMG then fastbooted it then I tried flashing the ROM and gapps and it always said failed before it did anything any ideas I am on 4.3 jellybean at this moment.
Click to expand...
Click to collapse
Your recovery is probably too old. Flash the latest recovery, then try again.
tj13 said:
Your recovery is probably too old. Flash the latest recovery, then try again.
Click to expand...
Click to collapse
I updated and still have yet to try but I am not s off not sure how on this device.
swordmastr54 said:
I updated and still have yet to try but I am not s off not sure how on this device.
Click to expand...
Click to collapse
If you are not S=off you need to update the boot.img separately. I believe that is done through fastboot commands. See http://forum.xda-developers.com/showthread.php?t=2121331
tj13 said:
Your recovery is probably too old. Flash the latest recovery, then try again.
Click to expand...
Click to collapse
I have updated the recovery and it still says error executing updater binary in zip, any ideas on why it does that?
swordmastr54 said:
I have updated the recovery and it still says error executing updater binary in zip, any ideas on why it does that?
Click to expand...
Click to collapse
I am using ClockworkMod 6.0.4.8. I did recently give twrp a try. I couldn't get CM updater to work with it. It also failed to manual flash a CM11 ROM. So I went back to clockwork. Could be my bad, but that was my experience with it.
tj13 said:
I am using ClockworkMod 6.0.4.8.
Click to expand...
Click to collapse
Can you post a link to it?
I thought I had posted these links before sorry.
http://wiki.cyanogenmod.org/w/Fireball_Info
http://wiki.cyanogenmod.org/w/HTC_fstab_updates
swordmastr54 said:
Can you post a link to it?
Click to expand...
Click to collapse
You can find updated TWRP recoveries here as well : http://mdmower.cmphys.com/category/fireball/
Fastboot command: Fastboot Flash Recovery (File Name Of Recovery .img)
Or
You can get a recovery flasher from the playstore if your computer doesn't like adb like mine. I know mine is most likely driver related, I just don't feel like fixing it right now.
I used this one: https://play.google.com/store/apps/details?id=de.mkrtchyan.recoverytools and directed it to where i downloaded my recovery.img in my phone, it flashed it and i rebooted and had the latest TWRP.
Enjoy and hope it works for you!
wmuflyer said:
I thought I had posted these links before sorry.
http://wiki.cyanogenmod.org/w/Fireball_Info
http://wiki.cyanogenmod.org/w/HTC_fstab_updates
Click to expand...
Click to collapse
I just tried again with twrp 2.7 it still says the same thing I'm going to restore backup then switch to clockwork and try again it still said the same error.
Your profile shows you're running the HTC Vivid or Samsung S4. Do you have an Incredible 4G also?
swordmastr54 said:
I just tried again with twrp 2.7 it still says the same thing I'm going to restore backup then switch to clockwork and try again it still said the same error.
Click to expand...
Click to collapse
wmuflyer said:
Your profile shows you're running the HTC Vivid or Samsung S4. Do you have an Incredible 4G also?
Click to expand...
Click to collapse
Yes I have it, its the wife phone but I figured out the current cm11 doesn't seem to work with this device.
Odd, I'm on the 5/14 nightly and it's working great. I'll try a more recent nightly and let you know if I have any issues. S-off is pretty easy with the guides out there and then you don't need to worry about flashing the boot.img which seems cause issues for some.
swordmastr54 said:
Yes I have it, its the wife phone but I figured out the current cm11 doesn't seem to work with this device.
Click to expand...
Click to collapse
wmuflyer said:
Odd, I'm on the 5/14 nightly and it's working great. I'll try a more recent nightly and let you know if I have any issues. S-off is pretty easy with the guides out there and then you don't need to worry about flashing the boot.img which seems cause issues for some.
Click to expand...
Click to collapse
Can you link to s off I havnt done anything like that.
I expect she has the latest verizon OTA if not do that then go here
swordmastr54 said:
Can you link to s off I havnt done anything like that.
Click to expand...
Click to collapse
Had trouble with the 5/28 nightly TWRP showed "Failed" the 5/29 flashed fine. Might have been a bad download on the 5/28.
Hello XDA members,
I was hoping somebody would help me out, I'm fairly new when it comes to installing custom roms so I require your patience. I don't know how to install a custom rom onto my Bell Atrix HD MB886, everytime I try it says abortion failed, what can I do to fix this. I have wiped data and all that probably 5 times in the past week alone. I would like to know how to successfully install roms without errors. Both the times that I have done this I had my bootloader unlocked, and I had clockword recovery mod latest version 6.0.4.4. I bought an SD card today to help install the roms because otherwise I can't do it from my internal storage. I really hope somebody can help me out.
Regards,
Roger
riekkir said:
Hello XDA members,
I was hoping somebody would help me out, I'm fairly new when it comes to installing custom roms so I require your patience. I don't know how to install a custom rom onto my Bell Atrix HD MB886, everytime I try it says abortion failed, what can I do to fix this. I have wiped data and all that probably 5 times in the past week alone. I would like to know how to successfully install roms without errors. Both the times that I have done this I had my bootloader unlocked, and I had clockword recovery mod latest version 6.0.4.4. I bought an SD card today to help install the roms because otherwise I can't do it from my internal storage. I really hope somebody can help me out.
Regards,
Roger
Click to expand...
Click to collapse
Hi there. A failed abortion certainly seems like an issue... I guess I am not totally clear on the status here. You say that you had CWM. Do you still have it? Bootloader is still unlocked? What rom are you trying to install? Are you certain it's for the Bell version and not like the AT&T one? What is the exact error message?
es0tericcha0s said:
Hi there. A failed abortion certainly seems like an issue... I guess I am not totally clear on the status here. You say that you had CWM. Do you still have it? Bootloader is still unlocked? What rom are you trying to install? Are you certain it's for the Bell version and not like the AT&T one? What is the exact error message?
Click to expand...
Click to collapse
No I don't have it atm as I just wiped the data/cache last night but will I already have CWM, I just need to unlock the bootloader and try again...I'm trying to install this one:
Android 4.4.2 KitKat Mokee Rom, and it says the version is a nightly. Yes I'm positive it's the Bell Version as I purchased it at a Bell Store and my carrier is Bell. The error message is "Installation Aborted." It begins installing, and then halfway through I get that error message. How do I fix this?
I figured you knew what phone you had. I was wondering if you had a rom built for the Bell version vs an ATT one. But since you are using a CM based rom, it obviously doesn't matter. Curious as to why you are bothering with relocking the bootloader? But I suggest to either try a different version of the rom, or to change your recovery to one of the Philz Touch versions as that's what some of the other users in that thread for the rom for your phone were using. You can find them here:
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/moto_msm8960
es0tericcha0s said:
I figured you knew what phone you had. I was wondering if you had a rom built for the Bell version vs an ATT one. But since you are using a CM based rom, it obviously doesn't matter. Curious as to why you are bothering with relocking the bootloader? But I suggest to either try a different version of the rom, or to change your recovery to one of the Philz Touch versions as that's what some of the other users in that thread for the rom for your phone were using. You can find them here:
Click to expand...
Click to collapse
No I was bothering to unlock it again, not lock it. Where can I find different versions for the 4.4.2 Mokee Rom? I've tried using the Philz Touch version: Motorola Atrix HD One Click Philz recovery installer and when I tried it a couple of times it said it failed to install although I'm not sure why. I came across these images the other day but how do I use the .img files on my device, as I'm not sure to proceed from here once I have them downloaded.
riekkir said:
No I was bothering to unlock it again, not lock it. Where can I find different versions for the 4.4.2 Mokee Rom? I've tried using the Philz Touch version: Motorola Atrix HD One Click Philz recovery installer and when I tried it a couple of times it said it failed to install although I'm not sure why. I came across these images the other day but how do I use the .img files on my device, as I'm not sure to proceed from here once I have them downloaded.
Click to expand...
Click to collapse
I was curious as why you relocked it in the first place.
Where are you getting Mokee from that doesn't have a link to their Downloads?
http://forum.xda-developers.com/showthread.php?t=2619489
For installing recovery:
http://forum.xda-developers.com/showthread.php?t=2262726
es0tericcha0s said:
I was curious as why you relocked it in the first place.
Where are you getting Mokee from that doesn't have a link to their Downloads?
For installing recovery:
Click to expand...
Click to collapse
thanks will try this out and let you know later how it works! I download the custom rom from true android blogspot.ca (can't post links just yet, annoying).
riekkir said:
thanks will try this out and let you know later how it works! I download the custom rom from true android blogspot.ca (can't post links just yet, annoying).
Click to expand...
Click to collapse
Right on. Well, you should bookmark the thread here on XDA because that's typically where the action happens.
es0tericcha0s said:
Right on. Well, you should bookmark the thread here on XDA because that's typically where the action happens.
Click to expand...
Click to collapse
Okay so I'm trying it now and the program won't even open :/
Odd. I just downloaded it to test and I didn't have any issues. If you can't get the actual application / exe file to open, then just use the Main-Skip.bat. Does the same thing.
If it doesn't open still, make sure that you have your anti-virus off as sometimes those interfere with programs like this. Might also try as admin.
es0tericcha0s said:
Odd. I just downloaded it to test and I didn't have any issues. If you can't get the actual application / exe file to open, then just use the Main-Skip.bat. Does the same thing.
If it doesn't open still, make sure that you have your anti-virus off as sometimes those interfere with programs like this. Might also try as admin.
Click to expand...
Click to collapse
Okay I wasn't looking at the actual .exe sorry, I got it to work and all I installed the Philz One Touch Recovery from that program, just downloaded a different rom and all and then I select the apply update from external storage and when it gets to the verifying update package, it gave me the same error message as yesterday, Installation Aborted.
So again, how do I fix this, am I doing something wrong? Why won't my custom rom install?
riekkir said:
Okay I wasn't looking at the actual .exe sorry, I got it to work and all I installed the Philz One Touch Recovery from that program, just downloaded a different rom and all and then I select the apply update from external storage and when it gets to the verifying update package, it gave me the same error message as yesterday, Installation Aborted.
So again, how do I fix this, am I doing something wrong? Why won't my custom rom install?
Click to expand...
Click to collapse
I don't think that is the most updated version. What's the version number of the recovery that was installed? It should be listed on the main page of it when you boot there. I was suggesting to use one of the new ones. It might have something to do with the SELinux support that KK roms need. You just have to put the img file in the tools folder and rename the new one the same. But here's no other error that shows up other than Installation Aborted? I was thinking usually it would have an error code or some other message.Have you checked the md5 of the rom zip to make sure it's not corrupted (if the dev provided it)?
es0tericcha0s said:
I don't think that is the most updated version. What's the version number of the recovery that was installed? It should be listed on the main page of it when you boot there. I was suggesting to use one of the new ones. It might have something to do with the SELinux support that KK roms need. You just have to put the img file in the tools folder and rename the new one the same. But here's no other error that shows up other than Installation Aborted? I was thinking usually it would have an error code or some other message.Have you checked the md5 of the rom zip to make sure it's not corrupted (if the dev provided it)?
Click to expand...
Click to collapse
Use one of the new versions of that program or to use the latest CWM which I have been. Okay I really don't know how to do that and where to move it to, how do I do such a thing? No it just says Installation Aborted... How would I do that? And yes I downloaded the new rom directly from his site.
riekkir said:
Use one of the new versions of that program or to use the latest CWM which I have been. Okay I really don't know how to do that and where to move it to, how do I do such a thing? No it just says Installation Aborted... How would I do that? And yes I downloaded the new rom directly from his site.
Click to expand...
Click to collapse
Look in the tools folder of the zip you downloaded. Download the newest Philz Touch img from the other link from earlier. Rename it to replace the one in the tools folder. Redo the recovery install. But you didn't say what version you already have.
es0tericcha0s said:
Look in the tools folder of the zip you downloaded. Download the newest Philz Touch img from the other link from earlier. Rename it to replace the one in the tools folder. Redo the recovery install. But you didn't say what version you already have.
Click to expand...
Click to collapse
Okay that did the trick, properly got philz recovery installed, did the install again, this time it worked, clicked reboot and now it's stuck at the Dual Core bootlogo screen
riekkir said:
Okay that did the trick, properly got philz recovery installed, did the install again, this time it worked, clicked reboot and now it's stuck at the Dual Core bootlogo screen
Click to expand...
Click to collapse
Did you do a full wipe, including wiping /system?
If you didn't, it should be under Mounts and Storage > Format /system of something of that sort.
es0tericcha0s said:
Did you do a full wipe, including wiping /system?
If you didn't, it should be under Mounts and Storage > Format /system of something of that sort.
Click to expand...
Click to collapse
No I forgot to do that dammit, can't get into recovery mode and my computer doesn't recognize my phone now, think I bricked it.
riekkir said:
No I forgot to do that dammit, can't get into recovery mode and my computer doesn't recognize my phone now, think I bricked it.
Click to expand...
Click to collapse
Pop the battery out for a bit, then pop it back in and hold Volume Down while powering up. Should get you into fastboot where you can skip to the recovery.
es0tericcha0s said:
Pop the battery out for a bit, then pop it back in and hold Volume Down while powering up. Should get you into fastboot where you can skip to the recovery.
Click to expand...
Click to collapse
The battery doesn't come out of my phone as you can't take the back off. I got into fast boot easily them selected recovery and nothing happened, I think my phone is screwed
riekkir said:
The battery doesn't come out of my phone as you can't take the back off. I got into fast boot easily them selected recovery and nothing happened, I think my phone is screwed
Click to expand...
Click to collapse
Oh yea, forgot you have to undo the screws on the bottom. So you scroll down to hit recovery and use the Power button to select and it doesn't do anything? That's odd.. Try and reflash the recovery since you can still get to fastboot. If that doesn't work, you're not totally screwed since you can still get to fastboot, that means you should be able to restore it to stock and start over.
Alternatively, if you have fastboot set up, you could make sure that philz touch is in the fastboot folder and use this command:
fastboot boot recovery nameofphilztouchfile.img
If you don't have fastboot, then just grab this one: http://forum.xda-developers.com/showthread.php?t=2317790 , drop the recovery img in that folder and open the CMD prompt on your computer and change directories to it and run the command.