I bought an S3 today that was already rooted with CleanRom 5.5.1 installed. I am wanting to install CM10. What are the steps I need in order to do so?
I will make it simple.
1. Check out the recovery, in your case I think 3rd part recovery should be already installed, if not, install one.
2. Wipe data / cache, format /system partition in recovery
3. Flash the ROM you want via recovery or Odin.
4. Reboot, done
Sent from my GT-I9300 using xda premium
qtwrk said:
I will make it simple.
1. Check out the recovery, in your case I think 3rd part recovery should be already installed, if not, install one.
2. Wipe data / cache, format /system partition in recovery
3. Flash the ROM you want via recovery or Odin.
4. Reboot, done
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
How do I check the recovery to see what is installed? I know how to wipe and format. Thanks for the help.
Harikiri13 said:
How do I check the recovery to see what is installed? I know how to wipe and format. Thanks for the help.
Click to expand...
Click to collapse
Boot into recovery and the recovery version should be at top.
If you want to install CM go to their site or thread and read fully the installation instructions.
Check first is your device even i9300, if not change to your own s3 variant forum... I dont think CleanRom is for i9300..
Related
I'd really appreciate some help guys, I've searched everywhere but can't seem to find answers.
I had Cyanogen Mod 9 rooted on my phone, however, I decided to install Omega instead, I installed it but I can't get on it! Everytime I install zip and reboot, it goes back to CWM Recovery!
The procedure was:
-deleted all files in internal SD
-Reboot into CWM Recovery
-Wipe data,cache,dalvik
-install zip from sd card
and now im stuck
Please help, and apologies if any noob mistakes were made
Cupuffy said:
I'd really appreciate some help guys, I've searched everywhere but can't seem to find answers.
I had Cyanogen Mod 9 rooted on my phone, however, I decided to install Omega instead, I installed it but I can't get on it! Everytime I install zip and reboot, it goes back to CWM Recovery!
The procedure was:
-deleted all files in internal SD
-Reboot into CWM Recovery
-Wipe data,cache,dalvik
-install zip from sd card
and now im stuck
Please help, and apologies if any noob mistakes were made
Click to expand...
Click to collapse
You'll lose all your data but do a factory reset and wipe your system in addition to what you've already done and re flash the rom. FYI always have a nandroid backup around before flashing. It's time consuming but saves you a lot of grief in the long run
Sent from my GT-I9300 using xda app-developers app
demondor said:
You'll lose all your data but do a factory reset and wipe your system in addition to what you've already done and re flash the rom. FYI always have a nandroid backup around before flashing. It's time consuming but saves you a lot of grief in the long run
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
How do I do a factory reset? My phone is on loop and boots up only into CWM Recovery, should i re download stock firmware and odin it into my phone? thank you so much for helping out
I don't have much on my phone so i didnt back up =[ what a mistake
Cupuffy said:
How do I do a factory reset? My phone is on loop and boots up only into CWM Recovery, should i re download stock firmware and odin it into my phone? thank you so much for helping out
I don't have much on my phone so i didnt back up =[ what a mistake
Click to expand...
Click to collapse
Factory reset(wipe) is an option in cwm(3rd from above) wipe and reflash the rom and let it boot,this can take 10min
1st check md5 .. it will show u wether its bad download or nt ... and then do this
go into cwm and to wipe data\factory reset wipe cache wipe dalvik and insll rom ..
omega 10 is up so better try omega 10 as its new rom :
hisee said:
1st check md5 .. it will show u wether its bad download or nt ... and then do this
go into cwm and to wipe data\factory reset wipe cache wipe dalvik and insll rom ..
omega 10 is up so better try omega 10 as its new rom :
Click to expand...
Click to collapse
I don't know how to check md5, but I already did the wipes and resintall several times, it still loops back into Recovery mode everytime
Cupuffy said:
How do I do a factory reset? My phone is on loop and boots up only into CWM Recovery, should i re download stock firmware and odin it into my phone? thank you so much for helping out
I don't have much on my phone so i didnt back up =[ what a mistake
Click to expand...
Click to collapse
Factory reset is on the main Cwm screen. You can wipe system through the 'mounts and storage' option
Sent from my GT-I9300 using xda app-developers app
demondor said:
Factory reset is on the main Cwm screen. You can wipe system through the 'mounts and storage' option
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Thanks, I've tried it just now and its still not working...
As said above, maybe the download is damaged, redownload and flash.. Good luck..
Huupie said:
As said above, maybe the download is damaged, redownload and flash.. Good luck..
Click to expand...
Click to collapse
How would put it into my internal SD if I can't transfer the file because I can only boot into Recovery or Download mode? Do I just Odin it straight in via the PDA option?
If you connect your phone with the PC while in recovery you should be able to use adb commands
Put the rom file into the adb folder than try
Code:
adb devices
now you should see any cryptic combination of letters and numbers in the next row
(if you see a empty row... that wouldn't be nice^^)
then do:
Code:
adb push yourromfile.zip /sdcard/yourromfile.zip
than try flashing again the new file
dont forget to do a full wipe, cache wipe, dalvik wipe, the common procedure^^
PS:
If you don't know about adb, it is installed with the android sdk, but you can download it seperately
place the ADB folder somewhere on you system hd, maybe directly to C:\
the open cmd and type
cd C:\ADB\
now you're able to use the above commands
You can put it on an external sd and flash it from there...
Verstuurd van mijn GT-I9300 met Tapatalk
Thank you, all of you... I will try this tomorrow and tell you guys how it goes!
Thank you so much EVERYONE, It all worked out, seems like the original file was corrupted, now running omega 10 smoothly!!!!!!!
i was trying to flash a new rom today and instead of 4ext (which i always used) there was an unfamiliar (to me) bootloader...it was called TWRP. Although iwas unfamiliar with this (and unknown to how that was being used instead of 4ext) i tryed flashing a new rom and it it kept getting stuck on the HTC boot screen. At some points, the rom didnt even install, but instead failed. i tryed several different roms but non work...PLEASE HELP!!!
You need to either flash the kernel (easy kernel flasher) or flash 4ext through ADB and turn on smart flash and refash a rom. I assume your s-on, of not you just had a bad zip.
Sent from my HTC_Amaze_4G using xda app-developers app
This should help
http://forum.xda-developers.com/showthread.php?t=1493905
Sent from my Nexus 7 using xda premium
jaytee20 said:
You need to either flash the kernel (easy kernel flasher) or flash 4ext through ADB and turn on smart flash and refash a rom. I assume your s-on, of not you just had a bad zip.
Sent from my HTC_Amaze_4G using xda app-developers app
Click to expand...
Click to collapse
see the thing is...I wanna factory reset my phone now but when I do..it says failed. How do I fix that?
xJatt4Lifex said:
see the thing is...I wanna factory reset my phone now but when I do..it says failed. How do I fix that?
Click to expand...
Click to collapse
If you have 4EXT recovery then:
1. Format your microSD first (If it may be formatted in Recovery - it's fine)
2. Put this ROM http://download2.clockworkmod.com/developer/2184/2115/ruby_unsigned_021812_031444.zip on your External SD.
3. wipe | format >> wipe data / factory reset
4. wipe | format >> format system
5. wipe | format >> wipe cash + dalvik
6. install from sdcard >> choose zip from sdcard >> Aforementioned ROM zip
Hope this works..
Hey guys.
I'm not new to rooting and flashing ROMs, but this RAZR is much different from the phones I'm used to... so I must start off as a noob with this phone. Also, I'm overly used to using Clockwork Mod Recovery and Safestrap is a bit different.
I need to know how to flash ROMs on my XT912 RAZR.
In Clockwork Mod Recovery, I used to wipe data 3x to make sure everything was cleared, wipe cache and then wipe dalvik cache... then flash the ROM.
Is this the same method used or are the steps to install a ROM different for this device?
Thanks.
I hate to ask such a noob question, but I really can't afford to make a mistake. Phones aren't cheap.
RBarnett09 said:
Hey guys.
I'm not new to rooting and flashing ROMs, but this RAZR is much different from the phones I'm used to... so I must start off as a noob with this phone. Also, I'm overly used to using Clockwork Mod Recovery and Safestrap is a bit different.
I need to know how to flash ROMs on my XT912 RAZR.
In Clockwork Mod Recovery, I used to wipe data 3x to make sure everything was cleared, wipe cache and then wipe dalvik cache... then flash the ROM.
Is this the same method used or are the steps to install a ROM different for this device?
Thanks.
I hate to ask such a noob question, but I really can't afford to make a mistake. Phones aren't cheap.
Click to expand...
Click to collapse
Use Safestrap recovery by Hashcode. It is based on TWRP. You can also dual boot roms (or even 3 and 4) on this phone. If you want more advanced or based on CWM, install the Boot Menu Manager in playstore
Sent from my GT-N7100 using xda app-developers app
TheMrcool212 said:
Use Safestrap recovery by Hashcode. It is based on TWRP. You can also dual boot roms (or even 3 and 4) on this phone. If you want more advanced or based on CWM, install the Boot Menu Manager in playstore
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
I'm using Safestrap.
I'm just wondering how to properly flash a ROM with this recovery.
RBarnett09 said:
I'm using Safestrap.
I'm just wondering how to properly flash a ROM with this recovery.
Click to expand...
Click to collapse
To flash a ROM you have to create a ROM-Slot in "Boot Options" then go to "Install" Then pick your ROM and that's it.
If your coming from another ROM you go to "Wipe" then wipe Dalvik Cache, then Cache then you Wipe System, then you go back and go to "Install" and pick your ROM.
Gus194 said:
To flash a ROM you have to create a ROM-Slot in "Boot Options" then go to "Install" Then pick your ROM and that's it.
If your coming from another ROM you go to "Wipe" then wipe Dalvik Cache, then Cache then you Wipe System, then you go back and go to "Install" and pick your ROM.
Click to expand...
Click to collapse
Do you recommend I check the zip file signature verification or the force MD5 check on all zips before flashing a ROM?
Or just not check either box and continue with the flash?
Idk, that's up to you. I have those unchecked. I just continue with the flash.
Gus194 said:
Idk, that's up to you. I have those unchecked. I just continue with the flash.
Click to expand...
Click to collapse
I checked both of them and it fails to flash. I just double checked the MD5 and then flashed anyways.
Luckily I'm not regretting anything. Haha.
Sent from my XT912 using xda app-developers app
I rarely check those when flashing. Though I don't know if it is bad practice or not.
Sent from my XT912 using xda app-developers app
tetakpatak said:
Please quote my post and copy&paste whole text into some help thread for your phone, it is better idea as we are now getting off topic here. I'll try to help you there.
Format /system is done in recovery mode under "mount and storage" then after that you can restore your nandroid if it is done with the same recovery you use now. If you're on PhilZ 6, it usually can restore also CWM 6 backups.
Click to expand...
Click to collapse
What does format system do? And please help me load sentinel rom. That's the one I was gonna do.
Okay now for the question... I was running stock 4.1.2 with siyah kernel 6.0 b5. Then I decided to install philz kernel, but ended up in bootloop. Then I tried flashing dorimanx but still in bootloop. All the while I wiped everything before flashing.
Now im stuck as I can boot into recovery via any kernel but ultimately phone is stuck.
What to do?
And can anyone give me steps to install sentinel rom from this stage?
Sent from my Nexus 4 using xda app-developers app
AndroidReborn said:
What does format system do? And please help me load sentinel rom. That's the one I was gonna do.
Okay now for the question... I was running stock 4.1.2 with siyah kernel 6.0 b5. Then I decided to install philz kernel, but ended up in bootloop. Then I tried flashing dorimanx but still in bootloop. All the while I wiped everything before flashing.
Now im stuck as I can boot into recovery via any kernel but ultimately phone is stuck.
What to do?
And can anyone give me steps to install sentinel rom from this stage?
Click to expand...
Click to collapse
Mate, sorry for waiting, I was out of home. We will get your ROM back as soon as the phone boots again.
Don't worry, it doesn't sound serious so far. We have recovery and download mode (so topic name "nothing works" isn't really correct)
Formatting /system wipes all data from the system partition (so your system will be gone then) and it is important to do before installing new ROMs (essencially important for KitKat). It can't do any harm. As you have tried to install other kernels and didn't work we should check first what did you try to flash so far and it didn't boot? Is that what you wrote all what you have tried?
Now let me know please which recovery do you have now and is it the same version like when you have created your nandroid backup? If the recovery is the same, I would indeed try to restore nandroid backup right after wiping /system. Before you wipe the system just let me know: can you use ADB? If yes, check do you have ADB connection in the recovery mode?
tetakpatak said:
Mate, sorry for waiting, I was out of home. We will get your ROM back as soon as the phone boots again.
Don't worry, it doesn't sound serious so far. We have recovery and download mode (so topic name "nothing works" isn't really correct)
Formatting /system wipes all data from the system partition (so your system will be gone then) and it is important to do before installing new ROMs (essencially important for KitKat). It can't do any harm. As you have tried to install other kernels and didn't work we should check first what did you try to flash so far and it didn't boot? Is that what you wrote all what you have tried?
Now let me know please which recovery do you have now and is it the same version like when you have created your nandroid backup? If the recovery is the same, I would indeed try to restore nandroid backup right after wiping /system. Before you wipe the system just let me know: can you use ADB? If yes, check do you have ADB connection in the recovery mode?
Click to expand...
Click to collapse
Will it wipe the internal memory? Or the rom in the phone?
I have cwm based recovery v. 6.0.1.2. Yes I used it to make the backup.
Checking for adb.. How do I do it? .
Sent from my Nexus 4 using xda app-developers app
AndroidReborn said:
Will it wipe the internal memory? Or the rom in the phone?
I have cwm based recovery v. 6.0.1.2. Yes I used it to make the backup.
Checking for adb.. How do I do it?
Click to expand...
Click to collapse
Hi! Internal memory usually shouldn't get wiped by formatting /system, as it is "storage", not part of the system. I would give a try, wipe all: data/factory reset, cache, dalvik cache (advanced) and format /system (mounts and storage). Then back to the main menu --> backup & restore --> restore from (internal or external memory where your nandroid is saved) and choose your backup. It should reboot normally then.
tetakpatak said:
Hi! Internal memory usually shouldn't get wiped by formatting /system, as it is "storage", not part of the system. I would give a try, wipe all: data/factory reset, cache, dalvik cache (advanced) and format /system (mounts and storage). Then back to the main menu --> backup & restore --> restore from (internal or external memory where your nandroid is saved) and choose your backup. It should reboot normally then.
Click to expand...
Click to collapse
Thanks for helping, but I ended up downloading the stock rom and flashing it. Everything was normal. Then I installed cm10.2 so everything's great now. Thanks!
Sent from my Nexus 4 using xda app-developers app
Cool, @AndroidReborn! Now you can install your old ROM again and restore nandroid. Keep that stock FW saved on your PC, so if your phone gets ever again soft-bricked, no problem to revive it again.
I am wondering how nobody here responsed your help prompt, we have in i9000 help threads always handfull people of experience and skills who are ready to help in need. And there are double amount of the SGS2 units sold around the world.... strange.
tetakpatak said:
Cool, @AndroidReborn! Now you can install your old ROM again and restore nandroid. Keep that stock FW saved on your PC, so if your phone gets ever again soft-bricked, no problem to revive it again.
I am wondering how nobody here responsed your help prompt, we have in i9000 help threads always handfull people of experience and skills who are ready to help in need. And there are double amount of the SGS2 units sold around the world.... strange.
Click to expand...
Click to collapse
No idea. The people seem pretty 'busy'. Thanks for helping. Just one teeny tiny last question.. How do I install cm11 or any kitkat rom over this? Cwm is 6.0.4.5 so it's compatible...
Sent from my Nexus 4 using xda app-developers app
If you want to flash kitkat, the first thing you need to do is flash a kitkat compatible CWM (v6.0.4.7). If you try to flash KK with an 'older' CWM, you'll get 'installation aborted....error status 7' or something similar........
I'm currently running @infected_s KK build, and in the OP, you will find download links for the correct CWM, ROM and GApps files.......
Sent from my Infected KitKat bar.....
keithross39 said:
If you want to flash kitkat, the first thing you need to do is flash a kitkat compatible CWM (v6.0.4.7). If you try to flash KK with an 'older' CWM, you'll get 'installation aborted....error status 7' or something similar........
I'm currently running @infected_s KK build, and in the OP, you will find download links for the correct CWM, ROM and GApps files.......
Sent from my Infected KitKat bar.....
Click to expand...
Click to collapse
6.0.4.5 is compatible? I think so ......
Sent from my Nexus 4 using xda app-developers app
I've always read....not.....
In any case, probably best not to risk it......
6.0.4.7 is DEFINITELY KK compatible.... and it'd take a couple of seconds to flash.........
Sent from my Infected KitKat bar.....
AndroidReborn said:
No idea. The people seem pretty 'busy'. Thanks for helping. Just one teeny tiny last question.. How do I install cm11 or any kitkat rom over this? Cwm is 6.0.4.5 so it's compatible...
Click to expand...
Click to collapse
Yes, mate, CWM 6.0.4.5 is capable of flashing KitKat.
It is usually always the same:
download your ROM zip and compatible Gapps
check in the phone (or PC) if the zips are corrupted through download (if they open after clicking them, they are fine)
move the zips to the folder you will flash it from (if you use PC to flash zips with ADB sideload, put them in the sdk/platform-tools folder)
make nandroid backup of your presently used ROM
wipe data/factory reset
wipe cache
wipe dalvik cache (advanced)
format /system (under mount and storage)
flash ROM.zip
flash Gapps
reboot
It is in general always good to read in the development thread of the ROM you attend to flash in the opening post which Gapps are recommended, or if there is some unusual order of flashing (sometimes, developers recommend reboot system after flashing ROM, and after that going to recovery and flash Gapps zip.
Some KitKat ROMs struggle with root access by using Superuser, so SuperSU should be flashed. If SuperSU app from Play Store gives errors by updating binary, you should uninstall SuperSU app then, find in the Chainfire's thread the compatible UPDATE-SuperSu.zip (version for your phone), flash its zip in the recovery, install SuperSU app, update binary (either "normal" or "through CWM/TWRP")
Good afternoon brothers XDA-Developers, I have an emergency and need help.
I try to install CM11 from S5 V3 Revolutionbut I jump bootloop and cache format, the system and others but is jumping the bootloop as I can fix that
excuse my English but I'm using google translator
What bootloader are you on? And did you wipe or format data?
Sent from my SCH-I545
pewds said:
What bootloader are you on? And did you wipe or format data?
Sent from my SCH-I545
Click to expand...
Click to collapse
ClockWordMod and yes, yes I did all the appropriate wipes
you must root the device, get latest recovery (twrp or philz touch) and then using the recovery you should do factory reset, install cyanogenmod zip and gapps zip.
other cool thing is cyanogenmod installer that does all this for you. go to cyanogenmod.org to get one,it comes as installable apk and instructions how to use usb connection to your pc and steps how to get your clean and stable CM
illustrious.hr said:
you must root the device, get latest recovery (twrp or philz touch) and then using the recovery you should do factory reset, install cyanogenmod zip and gapps zip.
other cool thing is cyanogenmod installer that does all this for you. go to cyanogenmod.org to get one,it comes as installable apk and instructions how to use usb connection to your pc and steps how to get your clean and stable CM
Click to expand...
Click to collapse
Yes what he said ?
Sent from my SCH-I545 using XDA Free mobile app