Hi guys i have samsung sc-02c i try to flash with i9100 it get error when is flashing hidden file.so i flash back with sc-02c flash file with pit file with odin 307 phone got flash but now show baseband unknown
can some one tell me how do i solve this problem?
mps5566 said:
Hi guys i have samsung sc-02c i try to flash with i9100 it get error when is flashing hidden file.so i flash back with sc-02c flash file with pit file with odin 307 phone got flash but now show baseband unknown
can some one tell me how do i solve this problem?
Click to expand...
Click to collapse
Sounds like a screwed up efs, do you have a backup?
evildave_666 said:
Sounds like a screwed up efs, do you have a backup?
Click to expand...
Click to collapse
Hi no sorry no back up can i fix with JTAG? or any other way?
mps5566 said:
Hi no sorry no back up can i fix with JTAG? or any other way?
Click to expand...
Click to collapse
Possibly JTAG may be able to revive it.
You also may have blown your emmc hardware by wiping with an unsafe kernel. If that's the case, motherboard replacement is likely necessary. You can look at http://forum.xda-developers.com/showthread.php?t=2094564 for a possible solution to emmc.
evildave_666 said:
Possibly JTAG may be able to revive it.
You also may have blown your emmc hardware by wiping with an unsafe kernel. If that's the case, motherboard replacement is likely necessary. You can look at http://forum.xda-developers.com/showthread.php?t=2094564 for a possible solution to emmc.
Click to expand...
Click to collapse
Hi thanks for the reply when i was flashing i9100 file it got error at the end
then i flash with sc-02c file with pit file phone is turn on now but still show i9100 i guess if i can make again sc-02c may be my phone will work again
i dont know after flash with sc-02c why still show i9100?
mps5566 said:
Hi thanks for the reply when i was flashing i9100 file it got error at the end
then i flash with sc-02c file with pit file phone is turn on now but still show i9100 i guess if i can make again sc-02c may be my phone will work again
i dont know after flash with sc-02c why still show i9100?
Click to expand...
Click to collapse
The SBL is not included with Docomo images.
evildave_666 said:
The SBL is not included with Docomo images.
Click to expand...
Click to collapse
so how do i make sc-02c again cuz when ever i turn on the phone show i9100
mps5566 said:
so how do i make sc-02c again cuz when ever i turn on the phone show i9100
Click to expand...
Click to collapse
Obtain a copy of the docomo sbl (from the general sc-02c thread) and reflash with odin.
evildave_666 said:
Obtain a copy of the docomo sbl (from the general sc-02c thread) and reflash with odin.
Click to expand...
Click to collapse
Hi thanks for reply and sorry to bother u if u have sbl can u give me link plz and i flash sbl file on pda section ?
i Appreciated ur help
mps5566 said:
Hi thanks for reply and sorry to bother u if u have sbl can u give me link plz and i flash sbl file on pda section ?
i Appreciated ur help
Click to expand...
Click to collapse
Read the SC-02C thread. All your questions are answered there.
Related
Im new to this plz plz help me my firm ware is
pda-lpg/phone:lpx /csc:lp8 (bog)
model gt-19100
android4.0.3
baseband:19100xxlpx
kernal:3.0.15-19100xwlpg-cl619440
build no:iml74k.xwlpg
and plz nay risk in rooting ??
khokhar1 said:
Im new to this plz plz help me my firm ware is
pda-lpg/phone:lpx /csc:lp8 (bog)
model gt-19100
android4.0.3
baseband:19100xxlpx
kernal:3.0.15-19100xwlpg-cl619440
build no:iml74k.xwlpg
and plz nay risk in rooting ??
Click to expand...
Click to collapse
Easiest way to root is to flash a rooted kernel, such as CF-Root kernel.
Here is the thread => http://forum.xda-developers.com/showthread.php?t=1103399&highlight=CF+Root
In Post #8 you will find CF-Root-SGS2_XW_NEE_LPG-v5.5-CWM5.zip which will work fine for your ROM.
Just download this kernel and flash it with Odin to your phone - as described in the first post.
If you want to remove the yellow triangle and reset the flash counter after flashing the CF-Root kernel, just use TriangleAway app from Chainfire (there is a link to it in the first post).
Good luck !
khokhar1 said:
Im new to this plz plz help me my firm ware is
pda-lpg/phone:lpx /csc:lp8 (bog)
model gt-19100
android4.0.3
baseband:19100xxlpx
kernal:3.0.15-19100xwlpg-cl619440
build no:iml74k.xwlpg
and plz nay risk in rooting ??
Click to expand...
Click to collapse
please find the link below read the OP post carefully before u root ur phone
http://forum.xda-developers.com/showthread.php?p=20075898#post20075898
I wrote extended tutorial for you here
custom rom
thanks my phone rooted.As i mentioned above my phone has french rom withbouygues career i want to change this rom .can i totaly change rom with ics 4.04
khokhar1 said:
thanks my phone rooted.As i mentioned above my phone has french rom withbouygues career i want to change this rom .can i totaly change rom with ics 4.04
Click to expand...
Click to collapse
sorry for my poor english
galaxy s2 rooting
przemcio510 said:
I wrote extended tutorial for you here
Click to expand...
Click to collapse
is it poosible to go to previous kernal after rooting?
also if you are planning to use other carrier make sure you have an unlock phone. If not, go to PLay Store and download Galaxy S2 unlock app.
You mean stock kernel? Yes, but only by flashing stock Samsung firmware.
przemcio510 said:
You mean stock kernel? Yes, but only by flashing stock Samsung firmware.
Click to expand...
Click to collapse
That's not true. You can just flash the stock kernel without flashing the entire firmware.
ctomgee said:
That's not true. You can just flash the stock kernel without flashing the entire firmware.
Click to expand...
Click to collapse
+1, kernel is independent of rom, u can always flash the same without any issue as long as its compatible
ctomgee said:
That's not true. You can just flash the stock kernel without flashing the entire firmware.
Click to expand...
Click to collapse
can plz guide me how to do this
Download a stock kernel, flash it in Odin. Not rocket surgery. You got your hand held on the first page & a half of this thread, time for you to do some reading/learning on your own; Stickies.
MistahBungle said:
Download a stock kernel, flash it in Odin. Not rocket surgery. You got your hand held on the first page & a half of this thread, time for you to do some reading/learning on your own; Stickies.
Click to expand...
Click to collapse
Thanks sir i do the same.sir i am just seeking help about the rom which i had on my sgs2 GT-I9100_ICS_4.0.3_BOG_I9100XWLPG_I9100BOGLP8_I9100XXLPX withbouygues france sir i want to replace same rom without any brand.And if i change the rom will i be able to update through kies in future. thanks in advance sir
Hi guys,
My friend's got a problem. He installed resurrection remix v 1.9.1 by westcrip 4.0.4 on his s2.
The kernel is:
3.0.31-siyah-v.3.2.4+
[email protected] #32
SMP PREEMPT Thu May 17 17:46:03
EEST 2012
He didn't do a backup before installing it and now he wants the original rom back. Could anyone here tell me exactly what he has to do?
He doesn't know anything about flashing roms etc and he did it as in the tutorial to get resurrection remix, so we need an easy tutorial (I don't own a s2 so I can't help him much).
His S2 has no branding.
Thx and please help!
Michi
Michi_optimus_me said:
He didn't do a backup before installing it and now he wants the original rom back.
Click to expand...
Click to collapse
Only your friend can know what firmware was on his phone before flashing the custom ROM. I suggest to use CheckFus to get the latest official firmware for the phone and then flash it using ODIN.
Michi_optimus_me said:
He doesn't know anything about flashing roms etc and he did it as in the tutorial to get resurrection remix, so we need an easy tutorial (I don't own a s2 so I can't help him much).
Click to expand...
Click to collapse
Using CheckFus is self-explanatory and for using ODIN there are already many excellent and easy to read guides here.
So CheckFus will tell which firmware is right for his device? It will tell exactly which firmware?
And could you post a link to a thread, where is explained how to flash the firmware using odin. Cause I don't understand anything about basebandkernel, and we don't know which firmware was there as he bought the device and which kernel and which baseband and whatever. Is there any tutorial for noobs?
Could you excatly post which firmware we need from here to get phone back on stock ics? We want a german firmware if possible. (I know you could just say ask google, but at xda heres a great community and I don't understand anything of odin and want to know which files exactly I have to download for phone, pda and cdc. That would be so great!)
Please help us!
Thx in advance!
Michi
EDIT:: I found this here: http://androidfirmwares.net/PhoneFirmware/Download/120
Can I download there and then I have to put them like this:
PDA: XWLPF
PHONE (Modem): XXLPX
CSC: OXILP6
?
And then get s2 to download mode?
And what about the kernel? There is this kernel on s2 right now:
3.0.31-siyah-v.3.2.4+
[email protected] #32
SMP PREEMPT Thu May 17 17:46:03
EEST 2012
How can I flash stock kernel? Or is it included in these PDA,PHONE,CSC Files?
Michi_optimus_me said:
So CheckFus will tell which firmware is right for his device? It will tell exactly which firmware?
Click to expand...
Click to collapse
Yes
Michi_optimus_me said:
And could you post a link to a thread, where is explained how to flash the firmware using odin. Cause I don't understand anything about basebandkernel, and we don't know which firmware was there as he bought the device and which kernel and which baseband and whatever. Is there any tutorial for noobs?
Click to expand...
Click to collapse
You will have to do quite a lot of reading. Start by reading the Stickies and then read this thread which explains how to use ODIN.
Remember: only fools rush in - take your time and read before flashing
Thanks a lot, but what about kernel now? We'll have to read the thread, but I just want to know if the firmware from android firmware was right and if I could flash the rom if I just put these 3 Phon,Pda and Csc in the fields and without repartition. So what about the kernel?
Sorry if I nerve you, but I'm a noob with s2/flashing etc and it's not my phone
Thx!
Michi_optimus_me said:
So what about the kernel?
Click to expand...
Click to collapse
The kernel is part of the stock firmware.
So we just need to place these 3 files in the right order in odin (PDA: XWLPF, PHONE (Modem): XXLPX, CSC: OXILP6) and go in download mode on galaxy s2. Then we can flash the firmware which is stock? And then we can update via kies if possible and use kies and etc? there's nothing else to do? And after the we have warranty as if we have just bought it?
EDIT:: I downloaded it but in the 7z file there were only boot modem cache etc and these were iso files? What have I got to do? Where can I download just pda, phone and csc? I dont get that!
Pls help!
Michi_optimus_me said:
So we just need to place these 3 files in the right order in odin (PDA: XWLPF, PHONE (Modem): XXLPX, CSC: OXILP6) and go in download mode on galaxy s2. Then we can flash the firmware which is stock? And then we can update via kies if possible and use kies and etc? there's nothing else to do? And after the we have warranty as if we have just bought it?
EDIT:: I downloaded it but in the 7z file there were only boot modem cache etc and these were iso files? What have I got to do? Where can I download just pda, phone and csc? I dont get that!
Pls help!
Click to expand...
Click to collapse
You can try www.sammobile.com for stock firmware too. You'll have to sign up, but it's worth it. You just search for the stock firmware for your device and flash through Odin. Do not use the repartition button or the pit file and you should be fine.
Sent from my GT-I9100 using xda premium
Michi_optimus_me said:
EDIT:: I downloaded it but in the 7z file there were only boot modem cache etc and these were iso files? What have I got to do? Where can I download just pda, phone and csc? I dont get that!
Pls help!
Click to expand...
Click to collapse
I doubt that, the 7z file contains one tar.md5 file. Do not untar it, no one said you should do so. For ODIN read and follow the instructions according to the link I posted in post #4. That thread tells you what to do with the firmware file.
Michi_optimus_me said:
So we just need to place these 3 files in the right order in odin (PDA: XWLPF, PHONE (Modem): XXLPX, CSC: OXILP6) and go in download mode on galaxy s2. Then we can flash the firmware which is stock? And then we can update via kies if possible and use kies and etc? there's nothing else to do? And after the we have warranty as if we have just bought it?
EDIT:: I downloaded it but in the 7z file there were only boot modem cache etc and these were iso files? What have I got to do? Where can I download just pda, phone and csc? I dont get that!
Pls help!
Click to expand...
Click to collapse
extract the file u downloaded from samfirmware or checkfus
u will have two files in it (in Latest gb or ics)
insert it in pda and flash
and ur done
the kernel is included in the firmware ..
Thx guys now I hope this is my last question on this topic:
I read the guide and downloaded a firmware. Now I don't understand the thing with checkfus. Do I really need checkfus or can I just download this firmware for a s2, unbranded, bought on amazon and it's a german s2?
Can I only put this extracted .tar.md5 file in PDA Section in Odin, boot s2 into download mode and connect to pc. Then click start and everything should went fine?
I own a xperia mini pro and there I must flash kernel and then firmware, so at odin and s2 the kernel will be changed when I flash pda and is included in pda?
Sorry, I asked same before, but I don't really understood
Thx for your great answeres, xda is a super community!
Michi_optimus_me said:
Thx guys now I hope this is my last question on this topic:
I read the guide and downloaded a firmware. Now I don't understand the thing with checkfus. Do I really need checkfus or can I just download this firmware for a s2, unbranded, bought on amazon and it's a german s2?
Click to expand...
Click to collapse
CheckFus is used to download the latest firmware. As you have downloaded the firmware from somewhere else, you do not need CheckFus anymore.
Michi_optimus_me said:
Can I only put this extracted .tar.md5 file in PDA Section in Odin, boot s2 into download mode and connect to pc. Then click start and everything should went fine?
Click to expand...
Click to collapse
Yes, exactly, load the tar.md5 file.
Michi_optimus_me said:
I own a xperia mini pro and there I must flash kernel and then firmware, so at odin and s2 the kernel will be changed when I flash pda and is included in pda?
Click to expand...
Click to collapse
Yes, correct, as stated earlier.
Michi_optimus_me said:
Sorry, I asked same before, but I don't really understood
Click to expand...
Click to collapse
No problem, better ask if unsure.I can see, you did some reading
Flash stock rom after resurrection remix
I just reflashed my samsung J-500H with the stock rom after gapps started crashing on resurrection remix. I had no problems going back to stock except the I had a boot loop for a few times my remedy was to do a data and factory reset on stock recovery. I will reflash RR after I find gapps that would work on my J5 Lollipop. Any suggestions?
I must have messed up during root, and my wifi wasnt turning on so I tried to flash stock rom, and now it wont boot. It boots up to;
Image too large!! W:1080 H:1920
display image fail
Secure fail: kernel
I've tried flashing several roms, yet no luck and I'm sure people have fixed this issue with their phones before. Some please help if they can
fogtint said:
I must have messed up during root, and my wifi wasnt turning on so I tried to flash stock rom, and now it wont boot. It boots up to;
Image too large!! W:1080 H:1920
display image fail
Secure fail: kernel
I've tried flashing several roms, yet no luck and I'm sure people have fixed this issue with their phones before. Some please help if they can
Click to expand...
Click to collapse
Are you sure you flash the correct firmware?..The secure kernel fail happen when you try to downgrading..
Carnage said:
Are you sure you flash the correct firmware?..The secure kernel fail happen when you try to downgrading..
Click to expand...
Click to collapse
My Mega was on 4.2.2 before I even thought about rooting it. The Samsung mega only has 4.2.2 firmware does it not? If it doesn't where do I find the lower firmwares?
This issue won't allow me to enter recovery mode. I can only enter download mode or ODIN is what its referred to.
fogtint said:
My Mega was on 4.2.2 before I even thought about rooting it. The Samsung mega only has 4.2.2 firmware does it not? If it doesn't where do I find the lower firmwares?
Click to expand...
Click to collapse
Yup,the mega still on 4.2.2 but some of newer firmwares got knox on it...try search the firmwares on SamMobile..or maybe @starmaster10 can help.
Edit:you cannot downgrade if you knox tripped.Choose the exact firmware you running before.
Carnage said:
Yup,the mega still on 4.2.2 but some of newer firmwares got knox on it...try search the firmwares on SamMobile..or maybe @starmaster10 can help.
Edit:you cannot downgrade if you knox tripped.Choose the exact firmware you running before.
Click to expand...
Click to collapse
I've spent a good part of the day looking for solutions and downloads and whatnot but still nothing. Am I screwed?
fogtint said:
I've spent a good part of the day looking for solutions and downloads and whatnot but still nothing. Am I screwed?
Click to expand...
Click to collapse
Try this http://forum.xda-developers.com/showthread.php?t=2461203
Carnage said:
Try this http://forum.xda-developers.com/showthread.php?t=2461203
Click to expand...
Click to collapse
I have a sd card for the phone but since I have this issue I can't enter usb storage mode so I can't put any files on it. I tried flashing all the firmwares with ODIN but I still end up with the secure fail: kernel error.
fogtint said:
I have a sd card for the phone but since I have this issue I can't enter usb storage mode so I can't put any files on it. I tried flashing all the firmwares with ODIN but I still end up with the secure fail: kernel error.
Click to expand...
Click to collapse
I GOT MY PHONE BACK!!!!!!!! THANK YOU SO MUCH OMFG.. ONE THING THOUGH, WIFI ISNT WORKING..sorry for caps i spent 12hours straight looking for a solution
fogtint said:
I GOT MY PHONE BACK!!!!!!!! THANK YOU SO MUCH OMFG.. ONE THING THOUGH, WIFI ISNT WORKING..sorry for caps i spent 12hours straight looking for a solution
Click to expand...
Click to collapse
No worries man.glad you fix it by yourself.
Carnage said:
No worries man.glad you fix it by yourself.
Click to expand...
Click to collapse
Re-flashed a rom I found in the thread you sent, and wifi is working fine. Thanks again. :good:
fogtint said:
Re-flashed a rom I found in the thread you sent, and wifi is working fine. Thanks again. :good:
Click to expand...
Click to collapse
Can you tell me which rom you flash to have the wifi working? I had the same wifi problme before and ends up have to flash with custom rom cm11.
Thx
bigboy0723 said:
Can you tell me which rom you flash to have the wifi working? I had the same wifi problme before and ends up have to flash with custom rom cm11.
Thx
Click to expand...
Click to collapse
ROOT_JDQ39.I527MVLUBNA3 <---thats what it was called. You can search in the thread for the link
bigboy0723 said:
Can you tell me which rom you flash to have the wifi working? I had the same wifi problme before and ends up have to flash with custom rom cm11.
Thx
Click to expand...
Click to collapse
I beleive this is the post for that rom here and you might have ti take the md5 ext. off the end of the file if it does not work..and this rom is pre-rooted also.
starmaster10 said:
I beleive this is the post for that rom here and you might have ti take the md5 ext. off the end of the file if it does not work..and this rom is pre-rooted also.
Click to expand...
Click to collapse
Yep, that's what I did. Thanks again for all your help.
i527 firmware
I want to post a sticky with unbrick instructions.
hello every one ,,,,,,
i have i527m for unlock ,, so i need to root this first i try wit kingo root etc but no luck , also super user new verion ,,
then i flash my phone with pre rooted file ROOT_JDQ39.I527MVLUBNA3 this file ,
after that now my phone dont have imei ,, imei \null null ,, basband unkown ,, ,,
and it showing 4.2.2 verion in side ,
now i cant find the offical file of 4.4.2 wich was inside before ,,
i try with i527m file like bell file etc ,, but i cant flash using odin , its failed ,,
also i try with an other i527m file its flashed but after flash i got image size error \etc
any way come to the point , i alrady try with 4.4.2 and 4.4.4 wich is alrady post here by an indian guy ,he put lot off file but all are not working on my phone , with sd card methoot , i try but all firmware are failed ,,,,,
now i need 4.4.2 firmware plz any one give me link ,,,
i527m 4.4.2
thanx in adance
Hello
I Make A New firmware by Odin Its 4.3 Because my Samsung S3 ( GT-I9300 ) Is too slow after that I Got Not registered at network And i check my imei by *#06# i Got 0049******
Its not my original Imei i have the original one Under the battery I Download new firmware but the same
i try ariza patch and the same
i have been trying to fix it for week ago
Please Help Me fast
saamiir said:
Hello
I Make A New firmware by Odin Its 4.3 Because my Samsung S3 ( GT-I9300 ) Is too slow after that I Got Not registered at network And i check my imei by *#06# i Got 0049******
Its not my original Imei i have the original one Under the battery I Download new firmware but the same
i try ariza patch and the same
i have been trying to fix it for week ago
Please Help Me fast
Click to expand...
Click to collapse
Try flashing these patched modem and kernel >> https://drive.google.com/folderview...sharing&tid=0B6MIUd7HJudAbU5YaGkzOUowMG8#list <<
Fail
tallman43 said:
Try flashing these patched modem and kernel >>
Click to expand...
Click to collapse
I Try Many Patched and modems files like this but fail !!!
saamiir said:
I Try Many Patched and modems files like this but fail !!!
Click to expand...
Click to collapse
Ok did you try the patched kernel and modem together or just the modem?
tallman43 said:
Ok did you try the patched kernel and modem together or just the modem?
Click to expand...
Click to collapse
Yes i try the kernal and modem :/ and fail
saamiir said:
Yes i try the kernal and modem :/ and fail
Click to expand...
Click to collapse
:cryingk if the patched files are not working and you don't have a efs backup then I would recommend service repair sorry.
tallman43 said:
:cryingk if the patched files are not working and you don't have a efs backup then I would recommend service repair sorry.
Click to expand...
Click to collapse
how to install modem and kernal togther correctly ?
saamiir said:
how to install modem and kernal togther correctly ?
Click to expand...
Click to collapse
Flash with a custom recovery like Cwm,Twrp, or PhilZ recovery.
tallman43 said:
:cryingk if the patched files are not working and you don't have a efs backup then I would recommend service repair sorry.
Click to expand...
Click to collapse
Ohh ohh wait i get Signature Verification Failed when i install kernal or modem how to fix for Samsung galaxy s3 ( GT-I9300
saamiir said:
Ohh ohh wait i get Signature Verification Failed when i install kernal or modem how to fix for Samsung galaxy s3 ( GT-I9300
Click to expand...
Click to collapse
Are you rooted if not you need to root your device.
tallman43 said:
Are you rooted if not you need to root your device.
Click to expand...
Click to collapse
i rooted by kingroot
saamiir said:
i rooted by kingroot
Click to expand...
Click to collapse
Mmm don't know much about that method.
What recovery are you using? Make sure the files you downloaded are not corrupt also make sure you are using a custom recovery (not stock recovery) also make sure you are definitely rooted these are common reasons for Signature Verification Failed
I recommend
(1) Flashing stock 4.3
(2) Rooting with CF-Auto-Root
(3) Flash Custom recovery Cwm,Twrp,PhilZ
then flash your patched files......
If not work service repair.....
tallman43 said:
Mmm don't know much about that method.
What recovery are you using? Make sure the files you downloaded are not corrupt also make sure you are using a custom recovery (not stock recovery) also make sure you are definitely rooted these are common reasons for Signature Verification Failed
I recommend
(1) Flashing stock 4.3
(2) Rooting with CF-Auto-Root
(3) Flash Custom recovery Cwm,Twrp,PhilZ
then flash your patched files......
If not work service repair.....
Click to expand...
Click to collapse
i install all kernals and modems with clockrom but still wrong imei
I Know that sure there are way to fix this wrong imei without get the old efs
or
there are way to repair efs file
Help me please :/
saamiir said:
i install all kernals and modems with clockrom but still wrong imei
I Know that sure there are way to fix this wrong imei without get the old efs
or
there are way to repair efs file
Help me please :/
Click to expand...
Click to collapse
The patched files don't fix wrong imei they only allow you to get a network signal by allowing your efs to read your modem thus giving you a signal. If they don't work then I suggest service repair.
fail
Anyone have another Method ?? or solution ??
Heelp !!!!!!!!!!!!!!!!!!!!!!!
tallman43 said:
...
Click to expand...
Click to collapse
After 4857687409485 patches, mods, wipe/resets and every possible (un)fix found on the Internet, I have seen the light.
You are simply great. Thanks.
G925F S6 Edge unknown baseband problem and no imei.
i flash fimware via smart switch but still the same any solution please .
sharrymz said:
G925F S6 Edge unknown baseband problem and no imei.
i flash fimware via smart switch but still the same any solution please .
Click to expand...
Click to collapse
try flappys thread more info needed.https://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
your link didn't work for me its a official stock firmware link.
I already flash via smart switch latest firmware.
sharrymz said:
your link didn't work for me its a official stock firmware link.
I already flash via smart switch latest firmware.
Click to expand...
Click to collapse
You have corrupted your efs. Very hard to revive. Try flashing the original firmware via odin.
I flash the original firmware via z3x but same problem.
I solve the problem with z3x with some files.
sharrymz said:
I flash the original firmware via z3x but same problem.
I solve the problem with z3x with some files.
Click to expand...
Click to collapse
how did you solve this problem?
sharrymz said:
I flash the original firmware via z3x but same problem.
I solve the problem with z3x with some files.
Click to expand...
Click to collapse
how you solved this problem.. i have same issue, please help me
RealParticle said:
how you solved this problem.. i have same issue, please help me
Click to expand...
Click to collapse
Flash combination ROM can fix it. Or flash efs and nv_data.bin file with zx3