hey. anyone know where i can get a replacement metal sticker for the back of the htc one? mine just fell off after 1 day of buying the phone..... bummer
I measured the logo at the back and it's 8mm x 22mm (unless this cheap ruler is off lol).... I found one in ebay but the advertised dimension was 9mm x 26mm
It's not meant to stay on for the life of the device.
You can always find the reference to your imei and serial engraved into your simtray
? My logo seems engraved. Can we see a pic. I'm interested in how it looks.
Sent from my HTC One using xda premium
mr.orange303 said:
? My logo seems engraved. Can we see a pic. I'm interested in how it looks.
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
Mine too. If you have an HTC sticker on the back, you may have a counterfeit One.
the htc logo at the back is not part of the unibody. it's not engraved, it's a metal sticker that can get peeled off unfortunately.
i managed to superglue the "C" back, although the superglue kinda dried at the bottom before I could press firmly, but better than no lettering at the back.
i'l take a pic when i a get a chance
18th.abn said:
It's not meant to stay on for the life of the device.
You can always find the reference to your imei and serial engraved into your simtray
Click to expand...
Click to collapse
I'm referring the the HTC logo at the back, not the sticker with the imei. that i removed first chance i got lol.
ericshmerick said:
Mine too. If you have an HTC sticker on the back, you may have a counterfeit One.
Click to expand...
Click to collapse
lol i got it direct from a tmobile store. it's glued to the unibody but mine came off lol..
EDIT: I used safety pin and was able to dislodge it again. i'll definitely take a pic later.
I don't have a One yet...
But here's a picture of the metal looking HTC logo on the back of my HTC incredible. I assume they're about the same thing.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my HTC One S using Tapatalk 2
xxquicksh0txx said:
I don't have a One yet...
But here's a picture of the metal looking HTC logo on the back of my HTC incredible. I assume they're about the same thing. View attachment 2015579
Sent from my HTC One S using Tapatalk 2
Click to expand...
Click to collapse
Yeah I want to see a pic of the One missing the logo. Is it plastic under? Or metal? Again mine seems engraved?
Sent from my HTC One using xda premium
mr.orange303 said:
Yeah I want to see a pic of the One missing the logo. Is it plastic under? Or metal? Again mine seems engraved?
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
I'm pretty sure it's not engraved, my cousin has a black One. And it's definitely not.
Sent from my HTC One S using Tapatalk 2
It's engraved for sure. Your one isn't a real HTC one.
Sent from my HTC One using xda premium
Mines is engraved yeah sounds like some one bought a a fake HTC one
Sent from my HTC One using xda app-developers app
here is the image. check the "c". it's a metal sticker. google htc metal sticker on ebay, pretty similar, except the sizes in ebay are a tad different. closest listing i saw was 26mm x 9mm, but when i measured the logo at the back it's 22mm x 8mm
bangsters said:
here is the image. check the "c". it's a metal sticker. google htc metal sticker on ebay, pretty similar, except the sizes in ebay are a tad different. closest listing i saw was 26mm x 9mm, but when i measured the logo at the back it's 22mm x 8mm
Click to expand...
Click to collapse
Get some epoxy, not superglue.
I'm desperately trying to peel my engraved logo off and it just ain't working. You bought it on eBay?
Sent from my HTC One using xda premium
Fernanernie said:
Get some epoxy, not superglue.
Click to expand...
Click to collapse
uhmm what's the difference? sorry never used epoxy. i actually wanted to use double sided tape but it doesn't look to be too sticky to keep it in place.
xxquicksh0txx said:
I'm pretty sure it's not engraved, my cousin has a black One. And it's definitely not.
Sent from my HTC One S using Tapatalk 2
Click to expand...
Click to collapse
nice to see you posting here mate
Sent from my HTC One using xda app-developers app
EclipzeRemix said:
nice to see you posting here mate
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
nice another member from jersey you close to marlboro area?
bangsters said:
nice another member from jersey you close to marlboro area?
Click to expand...
Click to collapse
nah I live in north jersey, about 20 minutes away from NYC
Sent from my HTC One using xda app-developers app
Mine seems engraved. Maybe the sticker is in the inside if the engraving?
Sent from my HTC One using xda app-developers app
I don't know why people keep saying "seems engraved " it doesn't seem engraved it IS ENGRAVED. Bangsters doesn't seem to be getting it though. I can see the indentation in the light. I can feel it. And there is no way in hell I'm peeling off etched metal.
Sent from my HTC One using xda premium
Related
Has anyone been able to find an OEM battery door replacement for the E3D? I couldn't come across one in a couple pages of Google hits..
Mine's getting kind of creaky (anyone else notice a creak upon applying pressure to the bottom-right corner?), and I was wondering how much a replacement cost.
18,60$ on ebay..
or on the htcstore 40$
http://cgi.ebay.com/New-OEM-HTC-EVO...165?pt=LH_DefaultDomain_0&hash=item27bcc5634d
Mine makes sound near the usb port when I change the volume.
Sent from my PG86100 using Tapatalk
Anyone now whee to find the GSM OEM battery door with the gold around the lens..?
Wouldn't mind a White Replacement door, myself
I bought a new door on Ebay for around
$12 shipped from Florida. Should be receiving it any day now. I plan to add a little bit of red paint to it.
If any one has any ideas our suggestions on what to do with it then let me know. Thanks
Sent from my PG86100 using xda premium
Raspster said:
Anyone now whee to find the GSM OEM battery door with the gold around the lens..?
Click to expand...
Click to collapse
Yes, but they are more expensive. I'll have one and one with the black bezel (instead of red). Hopefully arriving mid next week.
wrxlvr said:
Yes, but they are more expensive. I'll have one and one with the black bezel (instead of red). Hopefully arriving mid next week.
Click to expand...
Click to collapse
I got a rogers branded gold one in the states if you really want it i can trade.
Will the gsm cover work properly on the cdma one? I want to buy the black bezel one.
I've yet to see an all black one, just the red cdma and gold gsm. What does the all black door come with?
Sent from my PG86100 using xda premium
Rydah805 said:
Will the gsm cover work properly on the cdma one? I want to buy the black bezel one.
Click to expand...
Click to collapse
I believe that the chassis' are the same. I can let you know for sure once mine arrive next week (should be to me by Wednesday).
wrxlvr said:
Yes, but they are more expensive. I'll have one and one with the black bezel (instead of red). Hopefully arriving mid next week.
Click to expand...
Click to collapse
Where did you find the gsm door? Been looking everywhere for it.
Raspster said:
Where did you find the gsm door? Been looking everywhere for it.
Click to expand...
Click to collapse
Same! I want the gold trimmed one. If it's like $20 I'd still be willing to buy it.
http://www.amazon.com/Original-Genuine-Housing-Faceplate-HTC/dp/B0055FM6NE
Just found this, but it looks like it won't fit? That purple is pretty awesome though... not gonna lie.
empiire said:
http://www.amazon.com/Original-Genuine-Housing-Faceplate-HTC/dp/B0055FM6NE
Just found this, but it looks like it won't fit? That purple is pretty awesome though... not gonna lie.
Click to expand...
Click to collapse
That would be sick! I bet if you were going to all the trouble of putting it on, you could mod it to fit.
Sent from my 3D EVOlution
If you are only looking for the battery door, this will work on a Sprint EVO 3D. You are paying for the entire assembly but if its the battery door you are looking for and don't mind paying the extra cost, then this will work with any EVO 3D.
Raspster said:
If you are only looking for the battery door, this will fix a Sprint EVO 3D. You are paying for the entire assemly but if its the battery door you are looking for and don't mind paying the extra cost, then this will work with any EVO 3D.
Click to expand...
Click to collapse
What are you referring to?
Sent from my PG86100 using xda premium
wrxlvr said:
Yes, but they are more expensive. I'll have one and one with the black bezel (instead of red). Hopefully arriving mid next week.
Click to expand...
Click to collapse
Your battery doors ever arrive? If so, can you post pics and tell us where you got the all black door? Also, what carrier has an all black battery door? I have only seen black and red, other than the purple posted above; which I also have no clue which carrier offers the purple...
Sent from my PG86100 using xda premium
stanglifemike said:
What are you referring to?
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
The link added here with the purple one. If you are only looking to change your battery door, you can buy that one from Amazon and only use the battery door. You will be paying over $80 but you WILL have a NEW battery door cover that is a different color than the stock red one. I wish I can find just the battery door for the GSM EURO EVO 3D with the gold trim but without the Rogers logo. Only the EURO GSM one has that. Has anyone been able to find that anywhere without getting the entire replacement..?
stanglifemike said:
Your battery doors ever arrive? If so, can you post pics and tell us where you got the all black door? Also, what carrier has an all black battery door? I have only seen black and red, other than the purple posted above; which I also have no clue which carrier offers the purple...
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
Yep. I got them. The "all black" one is actually the purple one. The gold one doesn't have "Rogers" on it. I had to remove a little rubber sticker on the inside of the gold one, but both of these fit our CDMA phones like stock
I'll probably sell them both for what I paid for them, and pick up an OEM one to paint all black. PM me if you're interested in the gold or purple ones. Pics below.
Gold
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Purple
I just stumbled onto this site that has a lot of evo parts. I know people were looking for a place to buy the back cover.
link: http://www.etradesupply.com/htc/android-models/htc-evo-4g-lte.html
Fantastic find! I know I've been hunting for a place to buy a new back cover because of how quickly mine got scuffed up.
LiquidSolstice said:
Fantastic find! I know I've been hunting for a place to buy a new back cover because of how quickly mine got scuffed up.
Click to expand...
Click to collapse
I'm with you there! hopefully they come back in stock soon. That being said, I can not speak for the quality of the site but it looks legit
themuskr said:
I'm with you there! hopefully they come back in stock soon. That being said, I can not speak for the quality of the site but it looks legit
Click to expand...
Click to collapse
It does look legitimate. Have you been able to figure out how to remove the bottom cover on the back? Ideally, I'd love to know that I can replace that at any time as well.
LiquidSolstice said:
It does look legitimate. Have you been able to figure out how to remove the bottom cover on the back? Ideally, I'd love to know that I can replace that at any time as well.
Click to expand...
Click to collapse
The bottom piece will snap off. It just has a sticky tape wich makes you think you're about to break something but you won't. Took my phone apart after jumping in the pool with it last week.
via eVo.
There is a video link from this company somewhere in these forums that shows them totally dismantling this phone.
Sent from my A500 using Tapatalk
If you click on their Home icon you will find the videos. Here's the one for ELTE.
http://www.youtube.com/watch?v=pxMxgnMmm60&feature=player_embedded
Awesome find... I don't have a problem so much with fingerprints on the back cover, but how easily it gets scuffed up!
Sent from my EVO using xda app-developers app
Has anyone noticed that the shiny top back cover is as much as the battery?
It's like maintenance for a Ferrari or a Lambo. Prepare to part with some serious coin, peeps.
Sent From My S-OFFed, R00ted, 100% Tricked-Out HTC Evo 4G LTE via XDA Premium!
nvedamuthu said:
Has anyone noticed that the shiny top back cover is as much as the battery?
Click to expand...
Click to collapse
I was noticing the same thing.....
Supply & Demand I guess.
Nice find OP.
Señor Poo said:
I was noticing the same thing.....
Supply & Demand I guess.
Nice find OP.
Click to expand...
Click to collapse
The shiny back cover has some stuff on the underside that nfc needs to work properly I bet that bumps the price up a little too.
Awesome Site. Never know when a kickstand or something else will go bad. My og evo kickstand went to crap.
Sent from my EVO using Tapatalk 2
All out of stock still haha
Sent from my EVO using XDA Premium HD app
rofl if you think ours is expensive.
http://www.etradesupply.com/oem-sam...nd-digitizer-assembly-with-front-housing.html
Yup my baby fell face first on some gravel gotta get a new screen asap
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Galaxy SIII using Tapatalk 2
vdub804 said:
Yup my baby fell face first on some gravel gotta get a new screen asap
Sent from my Galaxy SIII using Tapatalk 2
Click to expand...
Click to collapse
Ouch!
sent from my LTEvo
Serves me right I was bragging how it didn't need an otterbox but my s3 did so yea karma's a *****
Sent from my Galaxy SIII using Tapatalk 2
vdub804 said:
Serves me right I was bragging how it didn't need an otterbox but my s3 did so yea karma's a *****
Sent from my Galaxy SIII using Tapatalk 2
Click to expand...
Click to collapse
I shed a tear for you bro
Tux approves of my EVO
If anyone needs replacements parts I can help. Message me what you need and Ill check if I can get it Friday.
Sent from my SPH-L710 using Tapatalk
^^^^ pm you, I need a digitizer
Ok I've had this phone since January. And I've kept it in a trident kraken case. And I took it off yesterday around 8 pm, and just kept it in my pocket.
Well I looked at the backside and noticed that the back don't fit flush. Look and try and piece all the pegs in the holes. Then I hold it and look at the side, and my phones chasis is bent. -_- Really out of everything my phone has to bend backwards.
Just thought I'd let u guys know they bend I'll post pics in a few.
Sent from my EVO using Tapatalk 4 Beta
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Look towards the back its laying flush.
Then look at the front its sticking up some. Uhmm covered by insurance, its s-off will I get a new one easily?
Sent from my EVO using Tapatalk 4 Beta
There were a bunch of threads on this last year. Last I remember this discussion was September.
Honestly I'm not surprised with how thin the lte is I'm glad that there are rumors of the butterfly coming to sprint.
If it does it will line up with renewal, and with how big the battery is it should be a substantial phone.
Sent from my EVO using xda premium
Yepp have to save my nickels and dimes lol
Sent from my EVO using Tapatalk 4 Beta
polar2792 said:
Look towards the back its laying flush.
Then look at the front its sticking up some. Uhmm covered by insurance, its s-off will I get a new one easily?
Sent from my EVO using Tapatalk 4 Beta
Click to expand...
Click to collapse
It looks fine to me lol. If it works then there's no difference....is there?
Sent from my EVO using xda premium
U dont see that right past the kickstand? That's not the point I'm sure this phone wasn't designed and built to be bent.
Sent from my EVO using Tapatalk 4 Beta
polar2792 said:
U dont see that right past the kickstand? That's not the point I'm sure this phone wasn't designed and built to be bent.
Sent from my EVO using Tapatalk 4 Beta
Click to expand...
Click to collapse
I see that gap but is that the case not properly on or is that the actual problem?
Sent from my EVO using xda premium
Nah its bent that's why its like that look between the box and the edge of the frame I dont have a camera that's better than this so I can't get that great of the picture.
Sent from my EVO using Tapatalk 4 Beta
That happen to me a couple of times now all I had to do is bend it back just don't over do it as far as I know it doesn't cause any harm to the screen are insides lol.
Sent from my EVO using xda app-developers app
Yea I want to try but I don't wanna break the screen
Sent from my EVO using Tapatalk 4 Beta
The back on my white version didn't fit flush out of the box. I looked at 3 of them in the store, and they all had the same problem. There were other issues with the bezel as well. This phone has been a disappointment. I still have a year before I can upgrade
Sent from my EVO using Tapatalk 4 Beta
Hotdizzle said:
The back on my white version didn't fit flush out of the box. I looked at 3 of them in the store, and they all had the same problem. There were other issues with the bezel as well. This phone has been a disappointment. I still have a year before I can upgrade
Sent from my EVO using Tapatalk 4 Beta
Click to expand...
Click to collapse
Not that big of a deal...
The phone shell is aluminum.....aluminum is soft and bends.
But it wasn't built with aluminum with the idea oh hey it'll bend that's cool
Sent from my EVO using Tapatalk 4 Beta
....and I thought I was bad with my phones.
Look, people. I'm not a little guy, and I usually put my phone in the front pocket of my pants. It moves around, it shifts sideways, etc, and you know how messed up my phone is from that?
Zero.
Are you guys sitting on your phones or something? Stepping on them? Because I can't see how my phone hasn't bent to hell, and I don't even have a case on it...
I dunno. Maybe I'm just one of the lucky ones.
The plastic piece on mine doesn't fit flush along the top edge, but it isn't bent. But it's dinged up, too. So it may be from all the drops, I Dont use a case.
Sent from my EVO using xda premium
So many variances between different individual phones. This is mass produced at its finest. With all the different data problems along with the aluminum parts
Sent from my EVO using Tapatalk 4 Beta
polar2792 said:
Ok I've had this phone since January. And I've kept it in a trident kraken case. And I took it off yesterday around 8 pm, and just kept it in my pocket.
Well I looked at the backside and noticed that the back don't fit flush. Look and try and piece all the pegs in the holes. Then I hold it and look at the side, and my phones chasis is bent. -_- Really out of everything my phone has to bend backwards.
Just thought I'd let u guys know they bend I'll post pics in a few.
Sent from my EVO using Tapatalk 4 Beta
Click to expand...
Click to collapse
Way to start a new thread for a really old topic.
Sent from magical jelly bean.
And your welcome
Sent from my EVO using Tapatalk 4 Beta
until yours looks like this one, youre doing fine. Mine has a slight bend and its been fine since launch day.
This is what I'm saying. Little bends will lead to that eventually.
Sent from my EVO using Tapatalk 4 Beta
I got it from ebay for about $8.00, and YES it does add some thickness. Feels nice and cold but it looks like aluminum cover sitting on top of regular one. Feels good to change litlle bit and it $8 it's not too much to spend
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Looks like it says 13 Megr lol
It does Chinese....
Sent from my SM-N900P using xda app-developers app
erik077 said:
I got it from ebay for about $8.00, and YES it does add some thickness. Feels nice and cold but it looks like aluminum cover sitting on top of regular one. Feels good to change litlle bit and it $8 it's not too much to spend
Click to expand...
Click to collapse
Mind paying a link good sir?
Sent from my SM-N900A using XDA Premium 4 mobile app
How easy is it to put on and remove? Will it get warped with repeated use?
Sent from my SM-N900T using XDA Premium 4 mobile app
Jammol said:
Mind paying a link good sir?
Sent from my SM-N900A using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Sure, http://www.ebay.com/itm/14115885092...eName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Do not expect anything perfect, it's cheap but good to change for the price.
Neo3D said:
How easy is it to put on and remove?
Sent from my SM-N900T using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Little bit harder than oem (to put it on, needs extra press for click) and for removing you will need to use something like pry tool (forget about using nails), this thing is holding firm
Neo3D said:
Will it get warped with repeated use?
Sent from my SM-N900T using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Don't know I just got it yesterday. It does look like aluminum frame is just attached to top regular door. It increases thickness but I don't use any cases right now (expecting one in next 2 days)
Does it affect your signal any? A lot of people have said the aluminum frames, bumper or all around cases, seem to affect their mobile reception. Was just wondering if it did that or not.
kamfl610 said:
Does it affect your signal any? A lot of people have said the aluminum frames, bumper or all around cases, seem to affect their mobile reception. Was just wondering if it did that or not.
Click to expand...
Click to collapse
I didn't see any difference while using this (except size and weight )
erik077 said:
I didn't see any difference while using this (except size and weight )
Click to expand...
Click to collapse
One more question, you put this over your regular battery door and not a wireless charging battery door? The reason I ask, I have the wireless charging battery door which makes the overall back a bit thicker and wondered if this would fit over this. Probably not but I thought I'd ask. Sorry for all the questions.
Neither. This comes attached to new door.
Sent from my SM-N900P using xda app-developers app
erik077 said:
Neither. This comes attached to new door.
Sent from my SM-N900P using xda app-developers app
Click to expand...
Click to collapse
Ah okay....thanks for answering the questions! :good: It won't work for me as I love my wireless charging door and looking for something to go over it to protect my phone somewhat.
Not sure could this aluminum part be removed and attached (glued) to charging cover. Don't have one to try it
Sent from my SM-N900P using xda app-developers app
erik077 said:
Not sure could this aluminum part be removed and attached (glued) to charging cover. Don't have one to try it
Sent from my SM-N900P using xda app-developers app
Click to expand...
Click to collapse
Anything is possible. I've seen so many DIY here on this forum, it spins my mind. I'm not quite that handy but it's definitely an idea I'd like to see someone else try
erik077 said:
Don't know I just got it yesterday. It does look like aluminum frame is just attached to top regular door. It increases thickness but I don't use any cases right now (expecting one in next 2 days)
Click to expand...
Click to collapse
Could you please post a picture so we can see what you mean? Also, it would help to see if their design is moddable.
I will post some new pictures or maybe even a video over the weekend
Sent from my SM-N900P using xda app-developers app
nice! i was looking to replace my white back cover for something different.
Sorry, I have been busy but here are couple pictures that might give you idea about possible modding. I almost broke this thing trying to show you more, but decided to stop since I have no wireless charging cover to experiment with it. I used red marking so you can see where is "lower" black cover (aluminum is attached to it, don't know how - didn't remove more than on picture itself but pic 3 shows something like clips), 2nd picture is same door from inside
you have cute hands
it's a aluminum plate, so wireless charging is out.
quality looks good.
Just like the title says...nothing fancy.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Nexus 6 using Tapatalk
So from what it looks like, you had a cloud white version, but ripped off the back and put on a black back cover instead?
And is your screen cracked?
Sent from my draconis using Tapatalk
vincentallen2 said:
So from what it looks like, you had a cloud white version, but ripped off the back and put on a black back cover instead?
And is your screen cracked?
Sent from my draconis using Tapatalk
Click to expand...
Click to collapse
I think that's just his cracked screen protector
vincentallen2 said:
So from what it looks like, you had a cloud white version, but ripped off the back and put on a black back cover instead?
And is your screen cracked?
Sent from my draconis using Tapatalk
Click to expand...
Click to collapse
Negative.
This is he midframe and back from the Moto X Pro.
Here's the pic from Motorola's website.
And it's the screen protector that's cracked...got a new one on the way.
Sent from my Nexus 6 using Tapatalk
Ah I see! Is there a big difference in the mid frame from the cloud white and x pro? They look very similar
Sent from my draconis using Tapatalk
You have a link to where you got the mid plate and back plate?
vincentallen2 said:
Ah I see! Is there a big difference in the mid frame from the cloud white and x pro? They look very similar
Sent from my draconis using Tapatalk
Click to expand...
Click to collapse
Here's the cloud white and moto x pro side by side. Pretty big difference.
Sent from my Nexus 6 using Tapatalk
swimdude1120 said:
You have a link to where you got the mid plate and back plate?
Click to expand...
Click to collapse
http://m.aliexpress.com/item/325360...Version=1&tracelog=wwwdetail2mobilesitedetail
Just make sure you start a dialog with them and make them understand you want the DARK GREY frame for the xt1115
Sent from my Nexus 6 using Tapatalk
That is a pretty big difference, thanks for sharing!
How long did it take you for this conversion? And was it difficult disassembling and reassembling everything?
Sent from my draconis using Tapatalk
Took about an hour. I have had my phone apart twice before so it may take a bit longer if it's your first time.
I bought a new battery which helped as well. Nothing wrong with my original battery just wanted to be safe as I'm gonna have this device for at least another year.
I followed this guide. There are links to the original XDA thread for this as well as teardown videos.
Sent from my Nexus 6 using Tapatalk
@buzzwyzr,
Very nice conversation job indeed, the phone looks much more refined and serious with gray chassis and black backpanel. Can you post a link for the battery ? I need to order from the same seller knowing you didn't have any issues with his battery.
Thanks.
Semseddin said:
@buzzwyzr,
Very nice conversation job indeed, the phone looks much more refined and serious with gray chassis and black backpanel. Can you post a link for the battery ? I need to order from the same seller knowing you didn't have any issues with his battery.
Thanks.
Click to expand...
Click to collapse
http://www.fixez.com/motorola-nexus...bm8a-WYroJNuDn27Ur8vZlHYgvjzqplMncaAlNt8P8HAQ
Here's the battery I purchased. The only issue I have with it is the cable is just a LITTLE bit longer than the factory battery. If you're not careful it is almost impossible to get plugged back in.
Sent from my Nexus 6 using Tapatalk
How's the quality of the mid frame? Does it feel like genuine OEM?
Sent from my Nexus 6 using Tapatalk
You have more guts than me. I'll just put on a case with a black back and grey sides.
bushako said:
How's the quality of the mid frame? Does it feel like genuine OEM?
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Of course because it is genuine OEM.
Sent from my Nexus 6 using Tapatalk
That back cover is the one with the rubberyish soft touch feel right? Similar to the N5?
Does anyone have a working link to purchase the moto x pro back cover?
Are there any other links to the back cover? the ebay one is no longer selling and the aliexpress is a mobile link for a blue chassis.
Meowdib said:
Are there any other links to the back cover? the ebay one is no longer selling and the aliexpress is a mobile link for a blue chassis.
Click to expand...
Click to collapse
No its not. It a link for all 3 colors. As I stated you have to start a dialog with them and specify that you want the DARK GREY chassis for the Moto X Pro.
Sent from my Nexus 6 using Tapatalk
toastgodsupreme said:
That back cover is the one with the rubberyish soft touch feel right? Similar to the N5?
Does anyone have a working link to purchase the moto x pro back cover?
Click to expand...
Click to collapse
Original New High Quality Rear Back Battery Cover For Motorola X Pro XT1115 free shipping with track code
http://s.aliexpress.com/jyuEfQzi
(from AliExpress Android)
I just ordered one from this link. I'll post when I receive it about quality and all that stuff.
Sent from my Nexus 6 using Tapatalk
buzzwyzr said:
Original New High Quality Rear Back Battery Cover For Motorola X Pro XT1115 free shipping with track code
http://s.aliexpress.com/jyuEfQzi
(from AliExpress Android)
I just ordered one from this link. I'll post when I receive it about quality and all that stuff.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
$30 for a back cover? And 27 days to deliver? Holy moly!