[Q] Wifi/Bluetooth "Error" when trying to turn on wifi - XPERIA X10 Q&A, Help & Troubleshooting

Hello,
I have pretty messy problem with X10, which i have to repair.
The problem is - when i want to turn my wifi on, after about 20 seconds of waiting phone shows "Error", that's just with my bluetooth - same.
Phone had 2.3.3 official android on it. I tried to make a factory reset, but nothing. Then i unlocked bootloader, flashed tons of ROMs and kernels and no progress. Some roms (or kernels) got me to next progress, i was able to turn wifi on, but it won't show me any of wifi networks available.
ONLY i get progress, when i installed MIUI ROM, i was able to see my wifi network, BUT that rom was real mess. It hot rebooted all the time after 10 sec. after boot up. Is there real possibilities to solve this problem? I have tried about 3 days to get it work, but nothing...
p.s i havent tried to install any of older firmwares (like 1.6; 2.1 or smth)
Thanks!
Hope you'll understand me, coz i'm not from any English country, lol.

Flash a stock kernel and its wifi modules. then report back.

djemm1996 said:
I tried to make a factory reset, but nothing. .
Click to expand...
Click to collapse
Did you repair with SEUS or PC Companion ?? If not, that's the first step :good:

As Madmike above says if you have big problem's use SEUS.
You can try drag and dropping a FTF file like this for eg. http://forum.xda-developers.com/showthread.php?t=2212260 into flashtool.
Follow instruction's from op.
Download V.4 And check no final verifacation in flash-tool.
Need latest version of flashtool's. For drag n drop.
Hope it help's.

I just tried repairing phone with SEUS, but no result.

kalel29 said:
Flash a stock kernel and its wifi modules. then report back.
Click to expand...
Click to collapse
Where i can get stock kernel and its modules?

doodownunda said:
As Madmike above says if you have big problem's use SEUS.
You can try drag and dropping a FTF file like this for eg. http://forum.xda-developers.com/showthread.php?t=2212260 into flashtool.
Follow instruction's from op.
Download V.4 And check no final verifacation in flash-tool.
Need latest version of flashtool's. For drag n drop.
Hope it help's.
Click to expand...
Click to collapse
I have flashed this ROM too, but this rom is not solution.

Does repairing with SEUS not work or does WIFI after repairing still not working??
If WIFI does not work after SEUS repair, I'm quite sure it is hardware related. Too bad ... you could try open the phone and reassign all the connectors on the pcb, worked for me once when speaker was broken, but thats just last hope or alternative...
Sent from my ASUS Transformer Pad TF300TL using XDA Premium HD app

MadMike10 said:
Does repairing with SEUS not work or does WIFI after repairing still not working??
If WIFI does not work after SEUS repair, I'm quite sure it is hardware related. Too bad ... you could try open the phone and reassign all the connectors on the pcb, worked for me once when speaker was broken, but thats just last hope or alternative...
Sent from my ASUS Transformer Pad TF300TL using XDA Premium HD app
Click to expand...
Click to collapse
After repairing with SEUS, it installed stock 2.3.3, but wifi/bluetooth still doesn't work.
hmm, i dont think it's hardware, bcoz on MIUI rom wifi worked, but i dont use it becouse it was unstable as sh*t. Hot reboots all the time.

Today my x10 has this problem! WiFi didn't work but Bluetooth work fine
try all method but didn't work …

uchithisanka said:
Today my x10 has this problem! WiFi didn't work but Bluetooth work fine
try all method but didn't work …
Click to expand...
Click to collapse
Same here. We need a solution. This problem isn't a hardware, but software. How about drivers and all that? Is it possible to reinstall drivers?

djemm1996 said:
Same here. We need a solution. This problem isn't a hardware, but software. How about drivers and all that? Is it possible to reinstall drivers?
Click to expand...
Click to collapse
I try it to didn't help bro.I don't know why WiFi didn't work.I flash all roms that I have.

uchithisanka said:
I try it to didn't help bro.I don't know why WiFi didn't work.I flash all roms that I have.
Click to expand...
Click to collapse
Anyone can help? Need a solution for this problem!

So, i just installed MM TEAM MIUI stock rom, which came with kCernel kernel. Also, there was wifi modules. So i tried to install it without wifi module at the begginning. So - again wifi error. BUT, when i installed wifi module, now i can turn wifi on, BUT.. it doesn't show me any wifi network + the device restarts all the time for about 5 sec. after boot.
Any ideas for fixing WiFi?

djemm1996 said:
So, i just installed MM TEAM MIUI stock rom, which came with kCernel kernel. Also, there was wifi modules. So i tried to install it without wifi module at the begginning. So - again wifi error. BUT, when i installed wifi module, now i can turn wifi on, BUT.. it doesn't show me any wifi network + the device restarts all the time for about 5 sec. after boot.
Any ideas for fixing WiFi?
Click to expand...
Click to collapse
I dont no what I did.but now my problem is sloved.im in stock kernal with dixperia8 stock version

Please move to Q&A thread. This ain't development.

uchithisanka said:
I dont no what I did.but now my problem is sloved.im in stock kernal with dixperia8 stock version
Click to expand...
Click to collapse
have you tried install other roms? And now it works?
ahhhh, i'm tired of installing ALMOST all ROMs. There have to be other solution.

dude then its a hardware problem.

kalel29 said:
dude then its a hardware problem.
Click to expand...
Click to collapse
But why i got it work with MIUI rom?

Related

[Q] X10 apps keep crashing

Hi i have got this weird problem with my x10 it kepps cashing apps and rebooting tried flashing with flashtool and seus nothing is working please helpppp
Sharaz22 said:
Hi i have got this weird problem with my x10 it kepps cashing apps and rebooting tried flashing with flashtool and seus nothing is working please helpppp
Click to expand...
Click to collapse
What is the ROM or firmware the phone is on? Is the phone rooted, which baseband, and which xrecovery version if you have it? Info like that will help more people help you solve that problem.
Voelker45 said:
What is the ROM or firmware the phone is on? Is the phone rooted, which baseband, and which xrecovery version if you have it? Info like that will help more people help you solve that problem.
Click to expand...
Click to collapse
I am running wolfbreak Xperia TW 007.1 which is the most stable it does reboot but not as much as others and baseband is 52 and freexperia recovery i have tried flashing it with generic firmware but no luck and my phone is not under warranty the phone is rooted with superoneclick
Sharaz22 said:
I am running wolfbreak Xperia TW 007.1 which is the most stable it does reboot but not as much as others and baseband is 52 and freexperia recovery i have tried flashing it with generic firmware but no luck and my is not under warranty
Click to expand...
Click to collapse
Tell me how you are using flashtool, like, which folder are you putting generic firmware.
It should be in the firmware folder.
If you have it in the right folder. What are the error messages saying in flashtool?
Do you know how to put the phone in flash mode for flashtool?
Which version of flashtool do you have?
Voelker45 said:
Tell me how you are using flashtool, like, which folder are you putting generic firmware.
It should be in the firmware folder.
If you have it in the right folder. What are the error messages saying in flashtool?
Do you know how to put the phone in flash mode for flashtool?
Which version of flashtool do you have?
Click to expand...
Click to collapse
I do put the firmware in firmware folder then i click flash on flashtool then choose the firmware then click ok then i turn my phone off press the back key for a bit then connect the usb.
Sharaz22 said:
I do put the firmware in firmware folder then i click flash on flashtool then choose the firmware then click ok then i turn my phone off press the back key for a bit then connect the usb.
Click to expand...
Click to collapse
So then what goes wrong with flashtool?
Voelker45 said:
So then what goes wrong with flashtool?
Click to expand...
Click to collapse
It flashes it successfully but the phone keeps crashing apps and rebooting there is no problem with flashing
Sharaz22 said:
It flashes it successfully but the phone keeps crashing apps and rebooting there is no problem with flashing
Click to expand...
Click to collapse
I always hate saying this but i think you have something wrong with your phone's hardware. Flashtool should have fixed that problem. Have you tried pc companion or seus yet?
If that doesnt, you definetly have a problem. I hate to give you bad news.
Sent from my X10i using XDA Premium App
Voelker45 said:
I always hate saying this but i think you have something wrong with your phone's hardware. Flashtool should have fixed that problem. Have you tried pc companion or seus yet?
If that doesnt, you definetly have a problem. I hate to give you bad news.
Sent from my X10i using XDA Premium App
Click to expand...
Click to collapse
The phone is stable now on all roms no more reboots for day now but some apps still crash but not as much as before and some apps don't crash i don't think it is hardware fault it is something else i think not sure
How did you fix it?
Sent from my X10i using XDA Premium App
Can a faulty battery make the phone unstable?
Sharaz22 said:
Can a faulty battery make the phone unstable?
Click to expand...
Click to collapse
Possiblly
Sent from my X10i using XDA Premium App
could the reboots and apps crashing caused by battery?
I myself have same issue, regards battery i read somewhere a guy had a reboot, crash problem, he bought a 2500mA bat and claimed no more issues? So i think if battery over a two year age then maybe time for new, maybe somewhere these bats cnt handle the sudden power requirements required any longer, i have 4 bats, each oldr than 3 years at least. Anyone knw a place in za that one cd purchase a stronger amperage bat? I cd imagine a hardware issue, bt then why do so many work perfectly but some kp dn this? I have rd many complaints regards this phone. If it still is crashing i wdnt exactly call it anywhere near fixed? Bt im sitting with this prob, and im baffled, bt i still think a stronger batry wd be the 1st solution.
Sent from S3Terry, Galaxy SIII GTI9300, using 8ta/Telkom Mobile.

Help problem with keyboard lights x10 mini pro

Hello I am testing several ROMs with Android 2.3.7 and I have the problem all the lights are lit keyboard while the display is turned on, I tried the D4fix but does not solve the problem ...
I hope I can help, Thanks!
Another problem I have is that the wi-fi disconnects per second, is there any solution for this?
I have a x10 mini pro (stock kernel, I can not unlock the bootloader) and I meet all the requirements for installing the ROMs but I have these problems
00DSoul00 said:
Hello I am testing several ROMs with Android 2.3.7 and I have the problem all the lights are lit keyboard while the display is turned on, I tried the D4fix but does not solve the problem ...
I hope I can help, Thanks!
Another problem I have is that the wi-fi disconnects per second, is there any solution for this?
I have a x10 mini pro (stock kernel, I can not unlock the bootloader) and I meet all the requirements for installing the ROMs but I have these problems
Click to expand...
Click to collapse
Hi, i use minicm7-2.2.1 with this keybordlight update (http://forum.xda-developers.com/show....php?t=1685378), and it works fine even the wifi.
eyeh8u said:
Hi, i use minicm7-2.2.1 with this keybordlight update (http://forum.xda-developers.com/show....php?t=1685378), and it works fine even the wifi.
Click to expand...
Click to collapse
Not very helpful, apart from the keyboardlight fix. He can't unlock his bootloader, so he can't flash the nAa-GB kernel and so he can't run MiniCM7-2.2.1. He might still be able to use the fix for his keyboardlights though.
SmG67 said:
Not very helpful, apart from the keyboardlight fix. He can't unlock his bootloader, so he can't flash the nAa-GB kernel and so he can't run MiniCM7-2.2.1. He might still be able to use the fix for his keyboardlights though.
Click to expand...
Click to collapse
Oups...i didn't notice the bootloader part...sorry
Than use this. It's for stock kernels. A very stable rom and it has keybordlight fix. I used it for long time.
MiniCm7Pro: http://forum.xda-developers.com/showthread.php?t=1201116
00DSoul00 said:
Hello I am testing several ROMs with Android 2.3.7 and I have the problem all the lights are lit keyboard while the display is turned on, I tried the D4fix but does not solve the problem ...
I hope I can help, Thanks!
Another problem I have is that the wi-fi disconnects per second, is there any solution for this?
I have a x10 mini pro (stock kernel, I can not unlock the bootloader) and I meet all the requirements for installing the ROMs but I have these problems
Click to expand...
Click to collapse
Use this!
http://forum.xda-developers.com/showthread.php?t=1034585
Keyboard light LEDs Working Exactly like on stock!
INSTALLATION GUIDE:
------------------------------------------------------------------------------------------
For All Users
Install .apk (MD5 - 5EA253D199E553D9FA610B7977C1D456)
Yes, now you only need to install APK and enjoy , no need anything on hw_config.sh
Thank you! already solved in another way and now works as the Stock ROM (Android 2.1)

[Q] Xperia Neo Wlan issue

Hi everyone,
i got a xperia neo mt15i. i have a problem with the wlan. if i activate it,it doesnt find anything,the phone is getting hot and reboots randomly. i have tried some firmwares,but the wlan wont work. if i dont activate the wlan,the phone acts normally. is that a problem with the hardware? what i can do to find out whats the problem is?
(sorry for my bad english)...
Try stock rom. This can be done by repair option in PC Companiaon or Sony Update Service. If it doesn't help it might be hardware damage.
I have tried a Stock Rom and i have flashed the modem new..but it doesnt work.
Is there no tool,that can check the hardware?
Pc Companion wont work,because i am using Cyanogenmod 9...
evilspawnas said:
I have tried a Stock Rom and i have flashed the modem new..but it doesnt work.
Is there no tool,that can check the hardware?
Pc Companion wont work,because i am using Cyanogenmod 9...
Click to expand...
Click to collapse
Then use flashtool. But since you said you tried stock rom, I guess you already used flashtool.
btw. what new modem? what are you taking about?
If it's not working on stock rom(I mean clean stock rom), then take it to the service center.
I have used Flash Tool. The Modem i have flashed was the original from stock. Service center i dont want to because it has no guarantee...
so i think i have to live without wlan..maybe i thought sombody else have the same problem and a solution like soldering something..but i think
i have to buy a new handy...
thanks for helping...

[HELP] Touchscreen not working-SOLUTION FOUND!!

I recently flashed a CM9 based rom on my Xperia Sola,but after flashing its touchscreen stopped working,don't know why?I tried flashing .54 ftf via flashtool,it installed perfectly but it didn't make touchscreen respond.Then i tried it repairing through SUS but to no avail.Does anybody here know what would've gone wrong because i haven't flashed any custom kernel on it(yep locked bootloader) and i don't think that a rom can damage hardware(i know 'cause i have been porting CM9 based roms on my sola and they worked perfectly without any flaw).Is it the calibration problem or something?Don't know what should i do now.....
(Don't know why i went with Sony even when i knew deep in my heart that i would regret:silly
SOLUTION-post#7
I also have this problem.no any help me this problem?
Odp: [Q] Touchscreen not working
You can't flash CM9 based roms on locked bl. How did you done that :? Try to install other Rom but now for locked bl. Or if you made backup just restore it
Sent from my LT22i using xda-developers app
Vaith said:
You can't flash CM9 based roms on locked bl. How did you done that :? Try to install other Rom but now for locked bl. Or if you made backup just restore it
Sent from my LT22i using xda-developers app
Click to expand...
Click to collapse
You can bro...you just need the correct ramdisk file....so yep..its possible...and can't install any other roms apart from stock ftf...
Re: [Q] Touchscreen not working
akp.ajinkya said:
You can bro...you just need the correct ramdisk file....so yep..its possible...and can't install any other roms apart from stock ftf...
Click to expand...
Click to collapse
bro touch screen usually gets faulty after a ftf flash of different device
bt this is the first time i read something different corrupting a touchscreen
no solution bro take it to a service center
Sent from my Xperia U using Tapatalk 2
drsanket_xperia_u said:
bro touch screen usually gets faulty after a ftf flash of different device
bt this is the first time i read something different corrupting a touchscreen
no solution bro take it to a service center
Sent from my Xperia U using Tapatalk 2
Click to expand...
Click to collapse
Yes the different device ftf may cause touchscreen fault due to driver mismatching/wrong kernel,but i was using Sola's ftf so that is ruled out.Although you are right that something different is corrupting the screen 'cause Xperia Mini had the same problem that was related to some rom flashing.
Or may be,the flashtool doesn't format all the partitions of the phone and there are some hardware files still lurking somewhere in the one of the partition thats causing the problem,but its just my guess.
I thought that only wrong kernel can cause hardware failure,didn't knew that a simple rom flash can do this,so lesson learnt:silly:
Restored my touchscreen functionality
hva8 said:
I also have this problem.no any help me this problem?
Click to expand...
Click to collapse
Time for small celebration:victory:....'cause my Xperia sola need not go to service center.
Yes i found the solution and its simple as a pea.....
Just flash the stock gingerbread via flashtool and there you go....touchscreen's functionality RESTORED.I guess i was correct about the wrong driver lurking in some partition...
Hey hva8 give the above prescribed medicine to your Sola...i'm sure it will get well soon
Didn't flash back to ICS but i guess there shouldn't be any problem now.
Touchsreen Xperia Go Problem
akp.ajinkya said:
Time for small celebration:victory:....'cause my Xperia sola need not go to service center.
Yes i found the solution and its simple as a pea.....
Just flash the stock gingerbread via flashtool and there you go....touchscreen's functionality RESTORED.I guess i was correct about the wrong driver lurking in some partition...
Hey hva8 give the above prescribed medicine to your Sola...i'm sure it will get well soon
Didn't flash back to ICS but i guess there shouldn't be any problem now.
Click to expand...
Click to collapse
Hello!
I have the same problem with my Xperia Go. I flashed the wrong firmware (for Xperia sola) and then the touchscreen did not work. It's possible to use flashmode and fastbootmode and to lock and unlock the bootloader.
So i tried a lot of kernels, firmware etc. and the method above - but nothing work.
Can You help me!!
Bob
Bobby Cool said:
Hello!
I have the same problem with my Xperia Go. I flashed the wrong firmware (for Xperia sola) and then the touchscreen did not work. It's possible to use flashmode and fastbootmode and to lock and unlock the bootloader.
So i tried a lot of kernels, firmware etc. and the method above - but nothing work.
Can You help me!!
Bob
Click to expand...
Click to collapse
Try the method given above...i.e install gingerbread firmware via flashtool,switch on your phone...run it for sometime,the touchscreen should work at this point.If yes,you can reflash stock ICS on your phone.Thats it.You can download GB firmware for Go from HERE.
Hope this helps.
akp.ajinkya said:
Try the method given above...i.e install gingerbread firmware via flashtool,switch on your phone...run it for sometime,the touchscreen should work at this point.If yes,you can reflash stock ICS on your phone.Thats it.You can download GB firmware for Go from HERE.
Hope this helps.
Click to expand...
Click to collapse
Thank you for your help, but it does not work. I tried GB .62 and .84 with flashtool ver 6.x and 9.x with locked and unlocked bootloader. The touchscreen keeps black only the buttons responds (vibrate by pressing) a short time.
I think it's time for service center
Thanks
Bob
Bobby Cool said:
Thank you for your help, but it does not work. I tried GB .62 and .84 with flashtool ver 6.x and 9.x with locked and unlocked bootloader. The touchscreen keeps black only the buttons responds (vibrate by pressing) a short time.
I think it's time for service center
Thanks
Bob
Click to expand...
Click to collapse
By 'touchscreen keeps black' you mean that there is no display,that there may be some hardware fault,You should take it to the sevice center.
the solution isn't work me.the phone flash with all 2.3.7 android with flash tool but my touch not working.no any solution with problem
hva8 said:
the solution isn't work me.the phone flash with all 2.3.7 android with flash tool but my touch not working.no any solution with problem
Click to expand...
Click to collapse
Does the touchscreen fault occured after flashing a rom/mod or after a physical damage?
If it is related to some physical damage,the solution won't work and you have to send it to service center.
akp.ajinkya said:
Time for small celebration:victory:....'cause my Xperia sola need not go to service center.
Yes i found the solution and its simple as a pea.....
Just flash the stock gingerbread via flashtool and there you go....touchscreen's functionality RESTORED.I guess i was correct about the wrong driver lurking in some partition...
Hey hva8 give the above prescribed medicine to your Sola...i'm sure it will get well soon
Didn't flash back to ICS but i guess there shouldn't be any problem now.
Click to expand...
Click to collapse
Thanks for this ..
XperiaMT27 said:
Thanks for this ..
Click to expand...
Click to collapse
Glad to help you bro.Never say thanks...just press it instead.It means a lot.

[Q] Xperia Go st27i - Touchscreen not working after flashed custom rom

Dear xda forumers/developer,
my xperia go touchscreen is not working after flashed the custom rom. ive searched the entire forum for this matter, other than send to service center, there's no suggested solution yet. i respect everyone of you, so please return e a favour.
rom before flash:
stock ics 6.1.1.B.1.1.0
rom which lead to this problem:
http://forum.xda-developers.com/showthread.php?t=2242539
reason:
the stock is quite laggy, so i decided to try other rom
what ive tried so far:
SEUS to restore stock ROM - boots fine, touch screen not working
PC Companion, repair option - boots fine, touch screen still not working
Flashtool, flash stock ics 6.1.1.B.1.1.0 - boots fine, touch screen still not working
Flashtool, flash stock gb 6.0.B.3.184 - boots fine, touch screen still not working
Full restore from CWM backup - boots fine, touch screen still not working
the touchscreen works perfectly fine before flash the custom rom
The device however, boot fine, no boot-loop etc.
Just that since ive flashed the stock rom, recovery (CWM) and root access was gone. plus, i cant do anything to get through the setup screen/first time setup.
since CWM and Root was gone, i have no idea on how to install/put it back. i assuming CWM was gone because i cant seems to access the recovery. any idea?
any help would be much appreciated, thanks in advance!
u can try this
flash xperia go ftf
dun switch on
flash wrong ftf (say xperia u)
still dun switch on
flash xperia go ftf
now swtich on
ps - this works after cross flashing of ftf
never tried for cwm flashing leading to touchscreen failure
at maximum ... flashing a wrong ftf will make touchscreen non usable (which u r already having)
so u have nothing to loose
just try it
plz at ur own risk.... dun screw me if something goes bad
drsanket_xperia_u said:
u can try this
flash xperia go ftf
dun switch on
flash wrong ftf (say xperia u)
still dun switch on
flash xperia go ftf
now swtich on
ps - this works after cross flashing of ftf
never tried for cwm flashing leading to touchscreen failure
at maximum ... flashing a wrong ftf will make touchscreen non usable (which u r already having)
so u have nothing to loose
just try it
plz at ur own risk.... dun screw me if something goes bad
Click to expand...
Click to collapse
thanks for the reply. the developer has been informed about the non-working touch screen. maybe i should wait for an update.
meanwhile, do you have any idea on how to root & install cwm on stock rom?
currently on ics, with non-working touchscreen, i have basic knowledge about rooting and installing CWM, but have no idea on how to work on it, cant access menu and usb debugging due to touchscreen problems.
can we chat on skype? my skype id "cjoenic" , maybe you can give me some idea.
cjoenic said:
thanks for the reply. the developer has been informed about the non-working touch screen. maybe i should wait for an update.
meanwhile, do you have any idea on how to root & install cwm on stock rom?
currently on ics, with non-working touchscreen, i have basic knowledge about rooting and installing CWM, but have no idea on how to work on it, cant access menu and usb debugging due to touchscreen problems.
can we chat on skype? my skype id "cjoenic" , maybe you can give me some idea.
Click to expand...
Click to collapse
Have no skype due to limited data usage
U can't root without touchscreen
Without root u cant install cwm
Bt if u have unlocked bootloader u can install a custom kernel wid autoroot and cwm built in
drsanket_xperia_u said:
Have no skype due to limited data usage
U can't root without touchscreen
Without root u cant install cwm
Bt if u have unlocked bootloader u can install a custom kernel wid autoroot and cwm built in
Click to expand...
Click to collapse
about skype, its ok.
about the bootloader, it is locked.
cjoenic said:
about skype, its ok.
about the bootloader, it is locked.
Click to expand...
Click to collapse
Since ur touchscreen is damaged now
What r u waiting for?? If flashing a stock rom doesnt solves the issue how can u expect next update of projectgx will???
Why dun u try what I mention in post 2
drsanket_xperia_u said:
Since ur touchscreen is damaged now
What r u waiting for?? If flashing a stock rom doesnt solves the issue how can u expect next update of projectgx will???
Why dun u try what I mention in post 2
Click to expand...
Click to collapse
touchscreen damaged? is it on physical or software level?
post 2, about flashing xperia u tft? since i dont have CWM on it anymore. only best bet is ftf.
I won't say that to b hardware fault coz many people had the issue who successfully resolved
So no hardware problm
Bt they all flashed wrong ftf files and not cwm flashable Rom
drsanket_xperia_u said:
I won't say that to b hardware fault coz many people had the issue who successfully resolved
So no hardware problm
Bt they all flashed wrong ftf files and not cwm flashable Rom
Click to expand...
Click to collapse
ok thanks for confirming that. it really relieved me.
meanwhile waiting for the downloads, i think ill look for OTG cable at the local shop, maybe i can hook my mouse on it so that i can enable usb debugging, perhaps root it and install cwm recovery.
I have the same problem with the same ROM... I flashed GB and relocked bootloader. Gonna go to the service and let em check it out.. I hope it's going to be cheap.
*EDIT: Btw , root and CWM won't help you, been there done that.
*EDIT2: The second post didn't help.
Dimmay said:
I have the same problem with the same ROM... I flashed GB and relocked bootloader. Gonna go to the service and let em check it out.. I hope it's going to be cheap.
*EDIT: Btw , root and CWM won't help you, been there done that.
Click to expand...
Click to collapse
really? how do you confirm that?
could it be kernel / driver issue?
cjoenic said:
really? how do you confirm that?
could it be kernel / driver issue?
Click to expand...
Click to collapse
i confirm it , i used this rom from munjeni http://forum.xda-developers.com/showthread.php?t=1912865 v13 rom (Firmware 6.1.1.B.1.10 ) also i tried flashing the ftf files as mentioned above, now i'm trying to do the same in cmw maby would that help
cjoenic said:
really? how do you confirm that?
could it be kernel / driver issue?
Click to expand...
Click to collapse
The fact is, this is my second time going to this soft-brick, but last time I gave it at the mobile service and they fixed it in less than a week.
Sorry about my english.
Hmm via cmw it dont work , is thear any way to work on the touscreenfiles after its extracted with ext4 unpacker to replace it on the phone ?
dimme12 said:
Hmm via cmw it dont work , is thear any way to work on the touscreenfiles after its extracted with ext4 unpacker to replace it on the phone ?
Click to expand...
Click to collapse
sounds like an idea.
im still looking for another version/region of FTF file for the flashtool. might give it a few shot.
cjoenic said:
sounds like an idea.
im still looking for another version/region of FTF file for the flashtool. might give it a few shot.
Click to expand...
Click to collapse
what are you looking for , maby i cant help
and Under system/usr/idc there is a file called synaptics_rmi4_i2c.idc i think it is that file
Any idea what to do ?
Dimmay said:
Any idea what to do ?
Click to expand...
Click to collapse
I do have an idea and maby two ideas, but if it works I do not know. there is a difference between the two files as you can see, that each can be found in the ROMs after they are unpacked I thought to modify the file and stop, it in the custom rom but I think it makes little difference because the ROM does not yet start with a custom kernel .. I hope the other members know something how we can solve the problem or at least one that the ROM has made​​. otherwise it will go these week to a service center with the standard rom and closed boat lauder ... and let the service guys solve the problem, luckily the phone is in warranty: p but i wait for the time being: p
sorry for my bad english: d
dimme12 said:
I do have an idea and maby two ideas, but if it works I do not know. there is a difference between the two files as you can see, that each can be found in the ROMs after they are unpacked I thought to modify the file and stop, it in the custom rom but I think it makes little difference because the ROM does not yet start with a custom kernel .. I hope the other members know something how we can solve the problem or at least one that the ROM has made​​. otherwise it will go these week to a service center with the standard rom and closed boat lauder ... and let the service guys solve the problem, luckily the phone is in warranty: p but i wait for the time being: p
sorry for my bad english: d
Click to expand...
Click to collapse
no offense, but im not quite understand the beginning part.
i really hope for solution now. :crying:
cjoenic said:
no offense, but im not quite understand the beginning part.
i really hope for solution now. :crying:
Click to expand...
Click to collapse
lol okay .. you have stock rom for sony experia st27i and if you unzip it with 7 zip you can see that er is a file called (Under system/usr/idc) synaptics_rmi4_i2c.idc if you open that with notepad , you can read it is four the touchscreen.. i think it is that file thats have an problem. becouse in the custom rom , that file is different..
I am a beginner myself so I can not make it, but the one that the ROM has made ​ is going to work today on this ROM to find a solution and if not there someone else know how to solve it .. we need to have some patience
and I use a translator to translate as much as possible: p
the only solution is sony service with stock firmware en locked bootlouder i think

Categories

Resources