[Q] Huawei Y300-0151 firmware - Android Q&A, Help & Troubleshooting

Hi, I cant seem to find firmware v151 for my huawei Y300.
Can anyone direct me where I can find it? I tried google but all I can find is v0100.
I just had the phone and ignorantly replaced its firmware from 0151 to 0100. The problem is my 3G signal dropped significantly and camera quality became very bad. Anyone out there who can help me?

i do have the sam e problem cant find stock firmware of Y300-0151, can sum1 direct us to this firmware, i do have a problem with my phone right now..it stuck on boot logo, i can never go to recovery mode.

y300-0151 telstra firmware
Registered to XDA cause i have a problem..
I have the telstra branded y300-0151, been searching on the net for my correct firmware as i rooted the phone the lazy way as per instructions , rooted with locked bootloader. worked fine,
there wasnt much in the way of custom roms for this phone atm, and all i really needed it was for deleteing the bloatware and all the stuff i didnt want.
so had the phone at a working point, then played around with pimp my rom ( an app on play store) and changed something ??, now it just hangs on a black screen after the boot logo, i can get into recovery but all the firmwares ive been trying to flash dont pass forced update part 2,
so im searching for this
HUAWEI_Y300_firmware(Y300-0151,Android 4.1,Emotion_UI,V100R001C451B184,Australia-Telstra,05011NWH).zip
but only asanfile.com have the update supposedly. rang telstra they were no help, and have emailed huawei techs my issue,
am awaiting a reply.
any help, ideas ?
Cheers guys.

found it
ausRoach said:
Registered to XDA cause i have a problem..
I have the telstra branded y300-0151, been searching on the net for my correct firmware as i rooted the phone the lazy way as per instructions , rooted with locked bootloader. worked fine,
there wasnt much in the way of custom roms for this phone atm, and all i really needed it was for deleteing the bloatware and all the stuff i didnt want.
so had the phone at a working point, then played around with pimp my rom ( an app on play store) and changed something ??, now it just hangs on a black screen after the boot logo, i can get into recovery but all the firmwares ive been trying to flash dont pass forced update part 2,
so im searching for this
HUAWEI_Y300_firmware(Y300-0151,Android 4.1,Emotion_UI,V100R001C451B184,Australia-Telstra,05011NWH).zip
but only asanfile.com have the update supposedly. rang telstra they were no help, and have emailed huawei techs my issue,
am awaiting a reply.
any help, ideas ?
Cheers guys.
Click to expand...
Click to collapse
downloading now. standby for link to file if it works.
---------- Post added at 04:57 PM ---------- Previous post was at 04:11 PM ----------
tomguymer said:
downloading now. standby for link to file if it works.
Click to expand...
Click to collapse
Got the file and it started to load - pink progress bar - stops about 1/3 of the way. I don't know what the problem is now.

uploading now
DistantFather said:
Hi, I cant seem to find firmware v151 for my huawei Y300.
Can anyone direct me where I can find it? I tried google but all I can find is v0100.
I just had the phone and ignorantly replaced its firmware from 0151 to 0100. The problem is my 3G signal dropped significantly and camera quality became very bad. Anyone out there who can help me?
Click to expand...
Click to collapse
I tested it this morning and it works on my identical phone. Will post link when I get home from work tomorrow - taking a long time to upload.
Tom

Here is the file
HUAWEI_Y300_firmware(Y300-0151.Android4.1.Emotion_UI.V100R001C451B184.Australia-Telstra.05011NWH).zip (563.8 MB)
mega.co.nz/#!dslSTIgI!HvewsDsVI2CKLo_wo8Rn6AIodTNJUdqx230_H9DOfhA
add https// at the front - it wont let me post links.

tomguymer Thanks for the upload
(mega.co.nz/#!dslSTIgI!HvewsDsVI2CKLo_wo8Rn6AIodTNJUdqx230_H9D OfhA)
The link to the files is asking to enter a (Decryption Key) Do you have the key???
And with Firefox you get this but their is no ALLOW button??
Firefox needs your consent to download large files.
Please click ALLOW to continue your transfer.
(ALL GOOD I downloaded the file fine today Had to use a cloud browser..) Thanks Again

Update failed
Fr3ddY303 said:
tomguymer Thanks for the upload
(mega.co.nz/#!dslSTIgI!HvewsDsVI2CKLo_wo8Rn6AIodTNJUdqx230_H9D OfhA)
The link to the files is asking to enter a (Decryption Key) Do you have the key???
And with Firefox you get this but their is no ALLOW button??
Firefox needs your consent to download large files.
Please click ALLOW to continue your transfer.
(ALL GOOD I downloaded the file fine today Had to use a cloud browser..) Thanks Again
Click to expand...
Click to collapse
Hi there, I have the same issue here with the 3G network...
I have downloaded the file you mentioned and tryed to install into my Huawei Y300-0151 but during the installation, I got the error: "Update failed". I tried twice with no success. Nothing happen then, so I had to get off the battery to start the phone again and it started up with the current firmware.
Someone with the same error? Any suggestions?
Regards,

Y300-151 Bell Version
japegamx said:
Hi there, I have the same issue here with the 3G network...
I have downloaded the file you mentioned and tryed to install into my Huawei Y300-0151 but during the installation, I got the error: "Update failed". I tried twice with no success. Nothing happen then, so I had to get off the battery to start the phone again and it started up with the current firmware.
Someone with the same error? Any suggestions?
Regards,
Click to expand...
Click to collapse
I have the Bell Version with the 850/1900 WCDMA bands. I can't find this firmware anywhere. I can't seem to be able to download the firmware listed above. I wonder why Huawei would release the phone to a new market and not provide the firmware. I had a blue screen and recovered by flashing the Y300-100 international firmware just released. It wiped by North American 850/1900 bands. If anywone could please post the Y300-151 firmware it would be great! Also I wonder why anyone hasn't created a flashable ZIp which could change the cell radio for the region you are in. Other phones have this available.

tomguymer said:
HUAWEI_Y300_firmware(Y300-0151.Android4.1.Emotion_UI.V100R001C451B184.Australia-Telstra.05011NWH).zip (563.8 MB)
mega.co.nz/#!dslSTIgI!HvewsDsVI2CKLo_wo8Rn6AIodTNJUdqx230_H9DOfhA
add https// at the front - it wont let me post links.
Click to expand...
Click to collapse
thank you very much , brother

kinkin8888 said:
thank you very much , brother
Click to expand...
Click to collapse
Ill try this out at home. Hope it works and is not region flagged!

Thank You
tomguymer said:
HUAWEI_Y300_firmware(Y300-0151.Android4.1.Emotion_UI.V100R001C451B184.Australia-Telstra.05011NWH).zip (563.8 MB)
mega.co.nz/#!dslSTIgI!HvewsDsVI2CKLo_wo8Rn6AIodTNJUdqx230_H9DOfhA
add https// at the front - it wont let me post links.
Click to expand...
Click to collapse
It worked for me on 13/11/2016

pls help me to flash my huawei ascend y300 where can i find the website firmware?

Related

Samsung i9300 china flash failed, always stuck in modem

Hey guys, can any expert help me please
i have a samsung i9300 from china and i want to flash to normal rom
i did so but it failed. and now i when i turn it on it say "Firmware upgrade encountered an issue. Please select recovery mode in kies and try again"
and at the bottom of this message it have Chinese writing.
i still can go on download mode.
i downloaded several flash files and always failed when i flash, its always stuck on at the modem bit. .
please help me. http://forum.xda-developers.com/images/icons/icon9.gif
Having the the same problem with an american version. Is there any way to restore????????????????:crying:
Same problem here, may God have mercy on our souls.
Please someone give us a light of what we should do... This chinese rom is terrible, I can't even use GApps.
Go too this website http://www.sammobile.com/firmware/?page=3 and download the firmware for your correct phone model and country and then flash it with Odin.
Your phone should work 100% again after that :good:
hin83 said:
Go too this website -- and download the firmware for your correct phone model and country and then flash it with Odin.
Your phone should work 100% again after that :good:
Click to expand...
Click to collapse
My phone is from China but i don't want to use theirs room, I could just install the firmware from my country? It's the same model.
Breakyourfists said:
My phone is from China but i don't want to use theirs room, I could just install the firmware from my country? It's the same model.
Click to expand...
Click to collapse
Are you sure your phone is a I9300 and not a I9308, since Galaxy S3 in China have model number i9308 and Hongkongs model is i9300. And ofcouse if you dont want or like the stock firmware for your phone, you can always try out those customs rom here in XDA
hin83 said:
Are you sure your phone is a I9300 and not a I9308, since Galaxy S3 in China have model number i9308 and Hongkongs model is i9300. And ofcouse if you dont want or like the stock firmware for your phone, you can always try out those customs rom here in XDA
Click to expand...
Click to collapse
I'm sure it's l9300. I'm going to try my country firmware for l9300 first. What room would you recommend?
i tried that already bro, i downloaded like 5 different rom but always get stuck on the modem party. it failed at the end like almost finish.
thi phone is i9300 100% but it has chinese logo when it first start. also when i put it on download mode it shows chinese characters instead of english.
any idea anyone?
thanks!
chhay said:
i tried that already bro, i downloaded like 5 different rom but always get stuck on the modem party. it failed at the end like almost finish.
thi phone is i9300 100% but it has chinese logo when it first start. also when i put it on download mode it shows chinese characters instead of english.
any idea anyone?
thanks!
Click to expand...
Click to collapse
Please make a screenshot of your devices info and the download mode screen, then i can help you too locate the problem. Are you using Odin 1.8 for flashing??
---------- Post added at 11:53 AM ---------- Previous post was at 11:51 AM ----------
Breakyourfists said:
I'm sure it's l9300. I'm going to try my country firmware for l9300 first. What room would you recommend?
Click to expand...
Click to collapse
Friend. You can try Omega rom same as me, its a very updated and stable rom. There is many users from all around the world, incl Chinese using it.
Here is the link with info and download: http://forum.xda-developers.com/showthread.php?t=1663656
chhay said:
i tried that already bro, i downloaded like 5 different rom but always get stuck on the modem party. it failed at the end like almost finish.
thi phone is i9300 100% but it has chinese logo when it first start. also when i put it on download mode it shows chinese characters instead of english.
any idea anyone?
thanks!
Click to expand...
Click to collapse
You could try a 3 part flash if its available on sammobile.com
jje
I have the I9300 from mainland china as well. The one that boots up with the China unicom logo. I've managed to get everything working by flashing a stock china unicom rom, and then using mobile odin to flash a UK rom. Mobile Odin doesn't replace the bootloader, so even though I can now run stock UK firmwares and even custom roms such as CyanogenMod 9, the phone always boots up with the china unicom logo. Is this an indicator of a locked bootloader? If not, what else is preventing the flash from completing? the Partition Information Table? The CSC? If it's anything else other than the bootloader, then in theory shouldn't it be possible to flash a three part firmware? Repartition, and update the bootloader? I would think that this would result in a successful flash. I myself have not tried this as there is always the inherent risk of hard bricking the phone when playing around with the bootloader and PIT. If there are any more experienced xda members here, it'd be great to know what you think would work in this case.
Another Problem with Chinese Firmware
I appreciate the links. I'm downloading one of the firmware files now. Hope it works.
There's another reason why I don't like the Chinese firmware. The authorities have clumsily sabotaged VPN. If you try to turn on VPN service, the phone instantly crashes, allowing only emergency calls until you do a factory reset. Happened twice before I caught on.
Gary
hin83 said:
Please make a screenshot of your devices info and the download mode screen, then i can help you too locate the problem. Are you using Odin 1.8 for flashing??
---------- Post added at 11:53 AM ---------- Previous post was at 11:51 AM ----------
Friend. You can try Omega rom same as me, its a very updated and stable rom. There is many users from all around the world, incl Chinese using it.
Here is the link with info and download: http://forum.xda-developers.com/showthread.php?t=1663656
Click to expand...
Click to collapse
Appreciate the link, and downloaded it. But it contains all the files in a .zip file, and Odin requires a .tar file. How can I convert .zip to .tar, and will Odin work if I do?
Thanks.
gwrussell said:
Appreciate the link, and downloaded it. But it contains all the files in a .zip file, and Odin requires a .tar file. How can I convert .zip to .tar, and will Odin work if I do?
Thanks.
Click to expand...
Click to collapse
I think that zip is for CWM Recovery, so you'll have to get a stock Chinese ROM running first, and then install CWM, turn off signature check and then flash CWM through odin, then you can load the other roms into the SDcard using your computer and flash it through the recovery.
I have not this phone but found some info may be helpful.Goodluck.
http://www.chinaecarts.com/samsung-...nch-mtk6577-android-41-16gb-phone-p-3095.html
keng_never_die said:
http://www.chinaecarts.com/samsung-...nch-mtk6577-android-41-16gb-phone-p-3095.html
Click to expand...
Click to collapse
That phone is NOT A GENUINE Galaxy S III. It is a chinese knock off, a fake.
This is what gave it away:
- MTK MT6577 1.2GHz processor
No genuine S III device use this processor.
therefore, you do NOT have a real S III device and none of the S III roms will work with your phone.
Besides, since your phone has Android 4.1.5 (sic, according to the page you posted), why the hell do you want an older Android?
If you're in doubt about your phone, use this app:
https://play.google.com/store/apps/details?id=com.alxdroiddev.gs3identity
It will tell you if your phone is real or not.
Still Need rom?
GaryLiao said:
I have the I9300 from mainland china as well. The one that boots up with the China unicom logo. I've managed to get everything working by flashing a stock china unicom rom, and then using mobile odin to flash a UK rom. Mobile Odin doesn't replace the bootloader, so even though I can now run stock UK firmwares and even custom roms such as CyanogenMod 9, the phone always boots up with the china unicom logo. Is this an indicator of a locked bootloader? If not, what else is preventing the flash from completing? the Partition Information Table? The CSC? If it's anything else other than the bootloader, then in theory shouldn't it be possible to flash a three part firmware? Repartition, and update the bootloader? I would think that this would result in a successful flash. I myself have not tried this as there is always the inherent risk of hard bricking the phone when playing around with the bootloader and PIT. If there are any more experienced xda members here, it'd be great to know what you think would work in this case.
Click to expand...
Click to collapse
If you still need the rom for the i9300_chn_chn, i can help you, with a mixed room, fussion betwen PHE ( spain) and CHN (China).
Works very well, the problem is the bootloader i locked so, you olny can install moden, and sboot, from china.

[Q] THL W3+ Jellybean Update

So I have had the THL W3+ (dual core) for months now and I have to admit that it is a great phone. However, I believe that it would run a million times better with Jellybean installed. It comes with ICS and there has been no update released (right?)
So I was wondering if there was any way to get Jellybean on this device. It runs the MTK6577 processor on which Jellybean has been installed on other phone so I don't see why the W3+ hasn't got the update yet.
Thanks in advance!
iwillthinkofsomething said:
So I have had the THL W3+ (dual core) for months now and I have to admit that it is a great phone. However, I believe that it would run a million times better with Jellybean installed. It comes with ICS and there has been no update released (right?)
So I was wondering if there was any way to get Jellybean on this device. It runs the MTK6577 processor on which Jellybean has been installed on other phone so I don't see why the W3+ hasn't got the update yet.
Thanks in advance!
Click to expand...
Click to collapse
I need jellybean for the same phone too. please do let me know when you get the update.
thanks.
thlmobile said:
I send a message to the customer service of this site in thlmobilestore.com, they said THL W3 + phone has been discontinued, and recently they launched THL W8 +, configuration is very good.
Click to expand...
Click to collapse
So there is no way I can get Jellybean on my THL W3+ ?
iwillthinkofsomething said:
So there is no way I can get Jellybean on my THL W3+ ?
Click to expand...
Click to collapse
I guess we have to wait for ThL to release an update, or wait for someone who can help us port jellybean.
I'm a novice but if I happen to successfully port jellybean, I'll post the link
luminelx64 said:
I guess we have to wait for ThL to release an update, or wait for someone who can help us port jellybean.
I'm a novice but if I happen to successfully port jellybean, I'll post the link
Click to expand...
Click to collapse
Thank you, that would be great! I wish I could help but I'm a newbie. I just know the technical jargon.
However, I just stumbled on a result on google in which a customer review said that "since the just new jelly bean update" the phone runs much smoother? I don't even know how to check for an update because I don't have the option under Settings > About Phone.
iwillthinkofsomething said:
Thank you, that would be great! I wish I could help but I'm a newbie. I just know the technical jargon.
However, I just stumbled on a result on google in which a customer review said that "since the just new jelly bean update" the phone runs much smoother? I don't even know how to check for an update because I don't have the option under Settings > About Phone.
Click to expand...
Click to collapse
There's no option to check for update in the phone menus.
The update will be posted on their website http://en.thl.com.cn/Download/Index.html
About the review you came across, I've also seen it before.
Being desperate for jellybean update, I even registered on that website in order to contact the person who made that comment.
But I was dissapointed as the name wasn't clickable despite registration.
Right now, I even doubt that comment cos I've searched extensively for jellybean without success.
Maybe the person doesn't know how to check Android version.
luminelx64 said:
There's no option to check for update in the phone menus.
The update will be posted on their website
About the review you came across, I've also seen it before.
Being desperate for jellybean update, I even registered on that website in order to contact the person who made that comment.
But I was dissapointed as the name wasn't clickable despite registration.
Right now, I even doubt that comment cos I've searched extensively for jellybean without success.
Maybe the person doesn't know how to check Android version.
Click to expand...
Click to collapse
Any firmware you suggest? The one that came with my phone had issues with the G-Sensor and the update the official website offers doesn't let me have apps like Viber and Grindr.
iwillthinkofsomething said:
Any firmware you suggest? The one that came with my phone had issues with the G-Sensor and the update the official website offers doesn't let me have apps like Viber and Grindr.
Click to expand...
Click to collapse
The firmware that came with my phone allowed Viber. And it's the same version on the website. You should click on "w3 dual core version" not "w3 upgrade" as that upgrade is meant for the MT6575 single core version only.
I saw a comment on the firmware talking about G sensor. I think it would fix your problem. it says " Oct. 8, 2012 update: 1. Optimize the shooting effect of rear camera; 2. Improve the compatibility of the G-sensor to solve the problems of some gravity sensor failure; "
Right now I'm using a firmware labeled ThL.w3.121113.6577.COM.EN
I got it from a Russian forum where they claimed it was the latest official firmware (contrary to what I saw in the linkhttp://en.thl.com.cn/Download/Index.html I posted earlier)
Before I recommend a firmware, what version are you running currently?
luminelx64 said:
The firmware that came with my phone allowed Viber. And it's the same version on the website. You should click on "w3 dual core version" not "w3 upgrade" as that upgrade is meant for the MT6575 single core version only.
I saw a comment on the firmware talking about G sensor. I think it would fix your problem.
Right now I'm using a firmware labeled ThL.w3.121113.6577.COM.EN
I got it from a Russian forum where they claimed it was the latest official firmware (contrary to what I saw in the linkI posted earlier)
Before I recommend a firmware, what version are you running currently?
Click to expand...
Click to collapse
I'm running the rom I found on needrom the website. Not sure which version it is. It comes with Samsung SIII wallpaper and sound effects. I don't like it though.
I tried to find the firmware you are using ATM but I can't find a download link. Do apps like Viber work on it? And the G-sensor?
iwillthinkofsomething said:
I'm running the rom I found on needrom the website. Not sure which version it is. It comes with Samsung SIII wallpaper and sound effects. I don't like it though.
I tried to find the firmware you are using ATM but I can't find a download link. Do apps like Viber work on it? And the G-sensor?
Click to expand...
Click to collapse
Ok I understand.
First, it's better you get this firmware http://en.thl.com.cn/Download/detail_55.html just click on download.
I advice you first of all install the one at link above and test it.
very soon, I will post the link to the latest firmware I'm running.
I need so search my browser history for it.
luminelx64 said:
Ok I understand.
First, it's better you get this firmware just click on download.
I advice you first of all install the one at link above and test it.
very soon, I will post the link to the latest firmware I'm running.
I need so search my browser history for it.
Click to expand...
Click to collapse
I'm finding it difficult flashing this ROM since I'm not sure which ZIP file to flash. There are no ZIP files, only RARs. And they include unnecessary stuff like USB VCOM DRIVER
Edit:
I think I will keep this frimware (the one I said I got from needrom). I just flashed gapps so App store works great. I'd love it if you could post when the Jelly Bean update comes out. I believe this phone could be great with a little more support. Jelly Bean would make it so much more smooth!
iwillthinkofsomething said:
I'm finding it difficult flashing this ROM since I'm not sure which ZIP file to flash. There are no ZIP files, only RARs. And they include unnecessary stuff like USB VCOM DRIVER
Edit:
I think I will keep this frimware (the one I said I got from needrom). I just flashed gapps so App store works great. I'd love it if you could post when the Jelly Bean update comes out. I believe this phone could be great with a little more support. Jelly Bean would make it so much more smooth!
Click to expand...
Click to collapse
ok, I assumed you knew how to flash using SP Flash Tool.
Anyway this is the link to the firmware http://yadi.sk/d/pSQ23rqr29rai
It can only be flashed using SP Flash tool. not from recovery as you did with your current ROM.
if you don't know how to use the tool, you might need to wait for jellybean update.
But hey... even if they release jellybean won't it be in the same format as the one you just got from their site?
they even bundled it with sp Flash tool.
luminelx64 said:
ok, I assumed you knew how to flash using SP Flash Tool.
Anyway this is the link to the firmware
It can only be flashed using SP Flash tool. not from recovery as you did with your current ROM.
if you don't know how to use the tool, you might need to wait for jellybean update.
But hey... even if they release jellybean won't it be in the same format as the one you just got from their site?
they even bundled it with sp Flash tool.
Click to expand...
Click to collapse
I actually just learned to use it. That comment about the Jelly Bean update format being the same made me REALLY motivated.
I'm flashing the latest firmware from their official site although I'm pretty sure that is the firmware which doesn't support apps like Viber. Thanks a lot
luminelx64 said:
ok, I assumed you knew how to flash using SP Flash Tool.
Anyway this is the link to the firmware http://yadi.sk/d/pSQ23rqr29rai
It can only be flashed using SP Flash tool. not from recovery as you did with your current ROM.
if you don't know how to use the tool, you might need to wait for jellybean update.
But hey... even if they release jellybean won't it be in the same format as the one you just got from their site?
they even bundled it with sp Flash tool.
Click to expand...
Click to collapse
Can you help me reinstall this phone's recovery without using recovery mode? Is that possible at all? Because at this point recovery mode keeps flashing purple colours like the screen goes really weird and all I can do is just restart the phone back into the OS. And the latest firmware doesn't have google apps such as the play store so I need to flash those, but without recovery working I can't.
iwillthinkofsomething said:
Can you help me reinstall this phone's recovery without using recovery mode? Is that possible at all? Because at this point recovery mode keeps flashing purple colours like the screen goes really weird and all I can do is just restart the phone back into the OS. And the latest firmware doesn't have google apps such as the play store so I need to flash those, but without recovery working I can't.
Click to expand...
Click to collapse
That happened to me too when I flashed a recovery I downloaded.
The latest firmware I flashed overwrote the recovery to the default.
I'm pretty sure the official firmware you downloaded will solve the problem cos it's exactly the same version that shipped with my phone (version; Oct. 8, 2012). Viber and play store worked perfectly.
In case you only want the recovery back, here's how:
to flash a recovery using sp Flash tool.
what you need is an image file called recovery.img and a scatter file.
1. Create a new folder. Preferably in a path without special characters (just to be safe). example C:\User\recovery
2. Locate these two files inside the official firmware you downloaded, and extract them into the created folder.
recovery.img and MT6577_Android_scatter_emmc.txt
Switch off your phone and Do not connect phone to PC yet.
3. Run the Flash Tool and click on Scatter-loading and point it to the MT6577_Android_scatter_emmc.txt file
4. Only the RECOVERY option should be ticked by now.
5. Click on download then connect your phone using the USB cable.
It would download the recovery image to your phone and show a green circle as sign of completion.
That's it.
EDIT: Don't forget to backup your data
EDIT 2: Since you want to flash the official firmware, it will automatically repair your recovery.
in that case just skip steps 1-2 and start from step 3 above and when you get to step 4, all the options will be ticked.
thlmobile said:
I send a message to the customer service of this site in thlmobilestore.com, they said THL W3 + phone has been discontinued, and recently they launched THL W8 +, configuration is very good.
Click to expand...
Click to collapse
If they discontinue w3+ and refuse to update it, they will do the same for w8+, refusing to update to Android 4.2 or 5.0
luminelx64 said:
That happened to me too when I flashed a recovery I downloaded.
The latest firmware I flashed overwrote the recovery to the default.
I'm pretty sure the official firmware you downloaded will solve the problem cos it's exactly the same version that shipped with my phone (version; Oct. 8, 2012). Viber and play store worked perfectly.
In case you only want the recovery back, here's how:
to flash a recovery using sp Flash tool.
what you need is an image file called recovery.img and a scatter file.
1. Create a new folder. Preferably in a path without special characters (just to be safe). example C:\User\recovery
2. Locate these two files inside the official firmware you downloaded, and extract them into the created folder.
recovery.img and MT6577_Android_scatter_emmc.txt
Switch off your phone and Do not connect phone to PC yet.
3. Run the Flash Tool and click on Scatter-loading and point it to the MT6577_Android_scatter_emmc.txt file
4. Only the RECOVERY option should be ticked by now.
5. Click on download then connect your phone using the USB cable.
It would download the recovery image to your phone and show a green circle as sign of completion.
That's it.
EDIT: Don't forget to backup your data
EDIT 2: Since you want to flash the official firmware, it will automatically repair your recovery.
in that case just skip steps 1-2 and start from step 3 above and when you get to step 4, all the options will be ticked.
Click to expand...
Click to collapse
Thank you SO much!
iwillthinkofsomething said:
Thank you SO much!
Click to expand...
Click to collapse
You are welcome.
Sent from my ThL W3 using xda app-developers app

Huawei Honor 3X PRO - G750-T20 8 core

Small noise "tic" 2 to 5 seconds after opening each new window in every soft.
Someone can explain what can i do to not ear this small noise all day long?
Is it because the phone is rooted?
I have the ROM B117.
root
Hi there.
I have the same phone.
not rooted my phone
How did you rooted!
Could you teach me?
Do you have a multi-lingual ROM?
rom b117
yasar82 said:
Hi there.
I have the same phone.
not rooted my phone
How did you rooted!
Could you teach me?
Do you have a multi-lingual ROM?
rom b117
Click to expand...
Click to collapse
Hello,
1. - First point the new rom b120, you can find it here :
EMUI 2.0
http://www.emui.com/plugin.php?id=hwdownload&mod=detail&mid=63
But also the new EMUI 2.3
2. - For rooting the phone you can install a soft named VROOT "setup VROOT ENGLISH.exe"
You connet with the USB cable the phone and it will make a good job.
3. - As i know till now the only languages for the T20 is English and Chinese, so there is no MULTI LANGUAGE.
Good luck.
Constantin.
Problem with 3g
Hi my friends
I just received the phone,it had 4.2.2 android and 3g (wcdma) worked perfectly.
Unfortunately,the fault is mine,i downloaded a kitkat 4.4.2 firmware of the phone from http://www.needrom.com/download/honor-3x-pro-kk/ without noticing that that rom was suitable only for TD-SDCMA........:crying:
As a consequence the 3g doesnt work any more and when i try to make a call a message appears ''the radio is off''.
I tried in vain to downgrade to 4.2.2 but ''fail''.
Could somebody help me please????Thank you in advance!
Try the version here :
http://www.emui.com/plugin.php?id=hwdownload&mod=detail&mid=63
make the upgrade, and tell me if the 3g works.
jeanoo_1979 said:
Try the version here :
http://www.emui.com/plugin.php?id=hwdownload&mod=detail&mid=63
make the upgrade, and tell me if the 3g works.
Click to expand...
Click to collapse
Dear Jeanoo thank you very much for your kind response and help!
I started downloaded it but my connection is very slow.When it will have donloaded it all i will tell you if the 3g works in my country wcdma.
Have a nice day!
The donwloading stopped and the winrar says C:\Users\KEYNES-PC\Downloads\EMUI2.3_G750-T20_4.10.1.zip: Unexpected end of archive
Is there any other site from where i could downloaded my friend?thank you!
I tried 5 times before fininshing to download. So try hard and you will succeed, even if will take few hours.
jeanoo_1979 said:
I tried 5 times before fininshing to download. So try hard and you will succeed, even if will take few hours.
Click to expand...
Click to collapse
Its been 10+ hours that i have been trying download the entire file but nothing my friend...The file seems to be broken..
Thank you very much!
bm-zbemil said:
Its been 10+ hours that i have been trying download the entire file but nothing my friend...The file seems to be broken..
Thank you very much!
Click to expand...
Click to collapse
I will try to send it to you with transfer website. Give me in private your e-mail address or i will post here the link.
jeanoo_1979 said:
I will try to send it to you with transfer website. Give me in private your e-mail address or i will post here the link.
Click to expand...
Click to collapse
Dear friend,i have already sent you in private message my email adress.
Thank you once again!
Dear bm-zbemil, have you try the new rom that jeanoo_1979 gave to you? Did the 3G connection works? Interested to upgrade if the 3G works. Now I'm with B120 firmware.
Riezman said:
Dear bm-zbemil, have you try the new rom that jeanoo_1979 gave to you? Did the 3G connection works? Interested to upgrade if the 3G works. Now I'm with B120 firmware.
Click to expand...
Click to collapse
Dear Riezman,my dear friend jeanoo hasn't sent me the rom yet,perhaps he is too busu during this period.But when he will have sent it to me i will keep you in touch then Actually,i still haven't got 3g
hello, in two days i will send it to you. i am abroad right now.
Riezman said:
Dear bm-zbemil, have you try the new rom that jeanoo_1979 gave to you? Did the 3G connection works? Interested to upgrade if the 3G works. Now I'm with B120 firmware.
Click to expand...
Click to collapse
Dear friend i am stiil facing the same problem.....
I upgrade the phone to EMUI 2.3 by SD but how can I roll back to EMUI 2.0??
They always said fail
jeanoo_1979 said:
Hello,
1. - First point the new rom b120, you can find it here :
EMUI 2.0
http://www.emui.com/plugin.php?id=hwdownload&mod=detail&mid=63
But also the new EMUI 2.3
2. - For rooting the phone you can install a soft named VROOT "setup VROOT ENGLISH.exe"
You connet with the USB cable the phone and it will make a good job.
3. - As i know till now the only languages for the T20 is English and Chinese, so there is no MULTI LANGUAGE.
Good luck.
Constantin.
Click to expand...
Click to collapse
I am on B1224.2.2 version.
I can´t root my phone with vRoot 1.7.9 version.
And also can´t update to 4.4.2 version by local update.
Please,advise me.
Thanks.
I have a G750-T20 hard bricked, that means: no led, no screen, no nothing
Only sounds on the computer when I connect it without the battery and then disconnect, that means one part is still alive (I think) 
Who can help me with a full Rom for this version phone (G750-T20) but in format to use with the Flash Tool to try to revive
Thanks in advance :good:
Sent from my HUAWEI G750-T00 using XDA Free mobile app
Attached images of a clone of G750-T20 ...
Personally I had not seen or had read that these models were imitated, but today they brought me one for service because it is completely dead: HARD BRIKED!!
Apparently they tried to put a G750-T20 stock rom and died ...
Someone had seen these models ??
Any idea where to get software for these clones ??

[TWRP-2.8.6.X][ unofficial ][ sm-n9100]

TWRP recovery.
I built this upon request from another member, but has never revisited the original thread to test whether it works or not, so I have no idea if it does or doesn't.
I asked him to supply me with the stock recovery which he didn't so I have grabbed it from else where.
I don't own this device, so it's up to someone to test and report:
http://forum.xda-developers.com/showpost.php?p=59963360&postcount=8
If the version above doesn''t work please try the one below:
TWRP-286x-n9100
Sorry none of the recoveries will boot up. All of them get stuck at the boot to recovery screen.
Even the stock recovery didnt work. ON another forum I posted the stock recov ery image as well as the modified cwm that would boot but wouldn't flash anything.
I'm using the 5.01 hong kong update from Sammobile for the sm-n9100.
Heres a link to the stock recovery from the firmware.
And this is the modified CWM that boots up but doesn't flash anything.
Hmm.. reminds me, I made a version myself..
Haven't tried it though, but I've successfully made versions for trltexx
MartiniGM said:
Hmm.. reminds me, I made a version myself..
Haven't tried it though, but I've successfully made versions for trltexx
Click to expand...
Click to collapse
Did you use the Hong Kong recovery? It may work now that he has flashed the Hong Kong firmware and bootloader.
I don't know what it is the Chinese do to these devices, but they always seem to cause issues.
I haven't had the time to look at it again, so hopefully your version will work.
ashyx said:
Did you use the Hong Kong recovery? It may work now that he has flashed the Hong Kong firmware and bootloader.
I don't know what it is the Chinese do to these devices, but they always seem to cause issues.
I haven't had the time to look at it again, so hopefully your version will work.
Click to expand...
Click to collapse
It's a TWRP recovery with a modded default.prop/build.prop.. and it is based on the values from the N9100 recovery posted above.
I tried all three and every time it would either not boot or got stuck in a bootloop.
Smaril said:
I tried all three and every time it would either not boot or got stuck in a bootloop.
Click to expand...
Click to collapse
Are you running the Hong Kong firmware?
ashyx said:
Are you running the Hong Kong firmware?
Click to expand...
Click to collapse
I'm not entirely sure my boss just handed me the phone and asked if I could put gapps on it.
I was going to just use twrp and install them that way, but I just went ahead and manually copied the files over to system.
MartiniGM said:
Hmm.. reminds me, I made a version myself..
Haven't tried it though, but I've successfully made versions for trltexx
Click to expand...
Click to collapse
Alright I'll give it a go... fingers crossed...
---------- Post added at 03:20 AM ---------- Previous post was at 03:10 AM ----------
MartiniGM said:
It's a TWRP recovery with a modded default.prop/build.prop.. and it is based on the values from the N9100 recovery posted above.
Click to expand...
Click to collapse
Oh its a zip file. How am I suppose to flash it if I don't have a working recovery? I thought odin uses tar format?
I guess twrp image is still not available for n9100 and there working root cf-auto for n9100 hong kong version
Hi all
TWRP is working for me
N9100 HK Lollipop firmware.
Found it in a rusian site.
I'm not owner / creator of this method/recovery
I just google, found and it worked for me
0. backup! backup ! backup!
1. flash via Odin any CMW based recovery and reboot
2. flash this kit via odin "Modem, Bootloader, TWRP for v5.x" N9100ZHU1BOC4_Modem_Bootloader_TWRP.tar
3; reboot
voila!
Obviously it's for lollipo so if you don't upgrade to lastest firmware from samsung, don't try it and dont complain
I will not post the link to the site here because the guy in this site is "selling" his custom roms; I disagree with it
kokabunga said:
Hi all
N9100ZHU1BOC4_Modem_Bootloader_TWRP.tar
Click to expand...
Click to collapse
make sure you click in the right area for the download otherwise it asks to install all sorts of crap.
wilcovh said:
Shame that I have to go through installing all kinds of crap before I can download the file
Click to expand...
Click to collapse
Does it work? I can't even download it. Could you possibly upload it somewhere?
see my previous post have amended it as I did not pay enough attention. download s going at the moment
wilcovh said:
see my previous post have amended it as I did not pay enough attention. download s going at the moment
Click to expand...
Click to collapse
Unfortunately it flatly refuses to let me download as it always states my ip range has reached its limit no matter how I try.
Seems my UK ip is just blocked. Proxy servers don't work either.
ashyx said:
Unfortunately it flatly refuses to let me download as it always states my ip range has reached its limit no matter how I try.
Seems my UK ip is just blocked. Proxy servers don't work either.
Click to expand...
Click to collapse
present downloading from uk IP
wilcovh said:
present downloading from uk IP
Click to expand...
Click to collapse
CAUTION! From your IP range the limit of connections is reached
try downloading again after 09 min 36 sec(s)
Every single time!
MartiniGM said:
Hmm.. reminds me, I made a version myself..
Haven't tried it though, but I've successfully made versions for trltexx
Click to expand...
Click to collapse
anybody get MartiniGM's TWRP works? I am downloading it...
and also, any success on Russian one 111MB tar?
ashyx said:
CAUTION! From your IP range the limit of connections is reached
try downloading again after 09 min 36 sec(s)
Every single time!
Click to expand...
Click to collapse
It works!!! Boots to TWRP!! (but why does the file contain a Modem and Boatloader as well..?)
I'll upload a link.
gcappa said:
It works!!! Boots to TWRP!! (but why does the file contain a Modem and Boatloader as well..?)
I'll upload a link.
Click to expand...
Click to collapse
Does it have all similar functionality to the original TWRP ?

Official Nougat for A3 2016

We all know that Nougat come to our A3 2016 devices in Germany,Hungary etc.. Anybody know when will Nougat hit other european countrys? I dont wanna flash german rom so must be patient, but i hope that will come in next few days not weeks. Anybody have some information?
I flashed german nougat with odin, very easy, and works fluid. You can try also, you won't brick the phone.
Download official samsung A3 2016 SM-A310F nougat release
thank you.. unfortunately those mirrors are very slow
I've downloaded it yesterday after 8 hours, putting it up on Mega so you can download full speed. Will update the post when I'm done.
EDIT: here's the link: https://mega.nz/#!xpQhgThC!I9PqHIoHh7wL4dziu4qo6m5qR9HF-rP5ho0bDZv2Qkw
Termich said:
I've downloaded it yesterday after 8 hours, putting it up on Mega so you can download full speed. Will update the post when I'm done.
EDIT: here's the link: https://mega.nz/#!xpQhgThC!I9PqHIoHh7wL4dziu4qo6m5qR9HF-rP5ho0bDZv2Qkw
Click to expand...
Click to collapse
Where you live? Why you didnt wait for oTA to come in your country? I will wait till friday if not come in Croatia i will flash that german build. Can you tell me is it stable? Somone says that its too laggy,no split screen,etc..
robi2109 said:
Where you live? Why you didnt wait for oTA to come in your country? I will wait till friday if not come in Croatia i will flash that german build. Can you tell me is it stable? Somone says that its too laggy,no split screen,etc..
Click to expand...
Click to collapse
I made a backup of my image. I doubt it will come soon to Croatia, knowing our carriers. I'll post back with results :good:
Termich said:
I made a backup of my image. I doubt it will come soon to Croatia, knowing our carriers. I'll post back with results :good:
Click to expand...
Click to collapse
I will wait few more days if not come OTA i will flash German build..so please test it 2 days and bring me some information about it,if have some bugs,or lags too much or something else.. i will wait for your info
robi2109 said:
I will wait few more days if not come OTA i will flash German build..so please test it 2 days and bring me some information about it,if have some bugs,or lags too much or something else.. i will wait for your info
Click to expand...
Click to collapse
Sure. For now I've noticed no problems. I'll need to install root to get rid of junk such as weather and Samsung bloat, but other than that, everything works smoothly. Will update in a couple of days
I have updated ota. Everything seems fine exept NFC.
I haven't managed to get it to work.
Anyone else?
robi2109 said:
I will wait few more days if not come OTA i will flash German build..so please test it 2 days and bring me some information about it,if have some bugs,or lags too much or something else.. i will wait for your info
Click to expand...
Click to collapse
I've creat a zip to flash nougat rom.
Here
You can flash it without problem. It's a multi-csc rom
I'm not German and no problem with this rom
sakat49;72648[LIST said:
[/LIST]715]I've creat a zip to flash nougat rom.
Here
You can flash it without problem. It's a multi-csc rom
I'm not German and no problem with this rom
Click to expand...
Click to collapse
I am newbie at flashing,can you please tell me steps how to flash your file? Is it with odin or? Can you post steps 1.,2.,3... how did you do that? And is there any lagg in rom? Or some other problem?
robi2109 said:
I am newbie at flashing,can you please tell me steps how to flash your file? Is it with odin or? Can you post steps 1.,2.,3... how did you do that? And is there any lagg in rom? Or some other problem?
Click to expand...
Click to collapse
Just unstall trwp recovery u can see a youtube video if u dont know
And downlaod rom in sd card then wipe ur system via twrp and install rom
Ur done
Nonamesofar said:
I have updated ota. Everything seems fine exept NFC.
I haven't managed to get it to work.
Anyone else?
Click to expand...
Click to collapse
Tested, works fine. Rom runs smoothly, rooted and debloated.
Battery life increased for a couple of offscreen hours.
Great update, the Phone seems to run even better then before, really impressed so far. Multi-Screen and Always-On are missing, tho, installing them manually won't work either. Guess it wasn't feasible with the A3s hardware limitations.
Yeah i think this german Nougat build is much better than marshmallow,very stable,better battery,fluid animations,very nice.. Tell me your opinions?
Termich said:
I've downloaded it yesterday after 8 hours, putting it up on Mega so you can download full speed. Will update the post when I'm done.
EDIT: here's the link: https://mega.nz/#!xpQhgThC!I9PqHIoHh7wL4dziu4qo6m5qR9HF-rP5ho0bDZv2Qkw
Click to expand...
Click to collapse
Thanks mate, you saved my life !
lemurm1n said:
Thanks mate, you saved my life !
Click to expand...
Click to collapse
No problem man!
Termich said:
I've downloaded it yesterday after 8 hours, putting it up on Mega so you can download full speed. Will update the post when I'm done.
EDIT: here's the link: https://mega.nz/#!xpQhgThC!I9PqHIoHh7wL4dziu4qo6m5qR9HF-rP5ho0bDZv2Qkw
Click to expand...
Click to collapse
Is this flashable with odin? It looks like there's only an CSC in it?
tvl1996 said:
Is this flashable with odin? It looks like there's only an CSC in it?
Click to expand...
Click to collapse
Extracted the zip, you get a tar.gz file ready to be flashed. I flashed with Odin, had no problems.
Hello and thanks for the ROM. I've ecountered a few issues:
1) MicroSD doesn't load when i turn off the phone, i have to remove it e put it back in again in order to be recognized
2) Apps like Colornote don't stay in memory when the phone is turned off and on again, so many notes saved on the status bar go missing and I have to open the app everytime
3) I can't delete bloatwares like Samsung apps and GApps. I use Link2SD to delete system app but doesn't work with this rom: when I restart the phone the apps are still there.
Hope someone helps me with this.

Categories

Resources