I remember there was a thread about this some time ago, but I can't find it anymore.
So, I have this red "1" on upper right corner of the screen when booting & charging the battery when phone is turned off.
Will TriangleAway work on it? If not, what will?
Read TA post and the return to stock for warranty posts for information .
jje
why does it bother you?
Glebun said:
why does it bother you?
Click to expand...
Click to collapse
It doesn't really bother me, but if I had to take the phone for repair it could be a problem.
you have to use TA and be completely stock in every way for it to disappear
To remove this...TA doesn't always work because samsung has blocked latest updates from removing the red 1....but you could re flash stock and root it...it will not show the red 1 anymore
sadeshmagic said:
To remove this...TA doesn't always work because samsung has blocked latest updates from removing the red 1....but you could re flash stock and root it...it will not show the red 1 anymore
Click to expand...
Click to collapse
TA works but ICS Bootloaders set the counter up again at every boot.
But yeah ...
1) Full stock followed by CF AUTO root and triangle away will reset forever.
2) Flash ICS Bootloader and triangle away will reset forever.
3) Triangle away followed by interrupt boot > Flash stock
If you'r returning for warranty now, 1 or 3 are the best options. If you want no sign of it now, so you can return for warranty later, 2 is the best - but also the most risky
first option for returning to warranty? but it'll be rooted
rootSU said:
TA works but ICS Bootloaders set the counter up again at every boot.
But yeah ...
1) Full stock followed by CF AUTO root and triangle away will reset forever.
2) Flash ICS Bootloader and triangle away will reset forever.
3) Triangle away followed by interrupt boot > Flash stock
If you'r returning for warranty now, 1 or 3 are the best options. If you want no sign of it now, so you can return for warranty later, 2 is the best - but also the most risky
Click to expand...
Click to collapse
Yeah very true...but some of the JB stock firmware also can be flashed and rooted via this method....i have personally tried it on 4.1.1 JB :angel::angel:
Glebun said:
first option for returning to warranty? but it'll be rooted
Click to expand...
Click to collapse
Its an app and binary, they can be removed.
yeah, but it's not a recommended way to do it if you're returning it now
Glebun said:
yeah, but it's not a recommended way to do it if you're returning it now
Click to expand...
Click to collapse
I don't see a problem. The Super SU app that is flashed with CF Auto Root has an unroot option that removes it's own binary. Can't think of any issues.
just seems like an extra step, there are easier options, you gave them yourself.
Yeah. 3 is fewer steps IF you can time boot interruption correctly which can be difficult.
I personally went with 2 which I think is the best option.
Option 1 is possibly the worst option but it is the easiest to do.
Sent from my GT-I9300 using Tapatalk 2
Related
Hi, I have downloaded some firmwares to my Samsung galaxy s2. The last firmware I put on was Official I thought but in download mode where is says "Curent Binary" it says custom. How do I get that back to official samsung? Is there a way through kies, like with iPhone where itunes can reinstall the os?
Also does a firmware that is vodafone branded be put on a handset that is on the three network? Would it affect the signal?
Thanks
Get a jig from eBay. If you find the jig doesn't work, flash the 'old' bootloader from here. Yes you can flash Vodafone branded firmware on a phone that uses 3's network. No, it shouldn't affect the signal. These things are dependent on your modem, and most roms don't replace your existing modem.
I flashed using a firmware from this site. http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9100&r=-1#modelsa and it returned it to the Samsung Official. Everything is back to standard.
MistahBungle said:
Get a jig from eBay. If you find the jig doesn't work, flash the 'old' bootloader from here. Yes you can flash Vodafone branded firmware on a phone that uses 3's network. No, it shouldn't affect the signal. These things are dependent on your modem, and most roms don't replace your existing modem.
Click to expand...
Click to collapse
Is flashing the old bootloader safe on a custom ROM? Even if it's an AOKP ROM? Cheers.
Yep.
However, some roms may not boot with the old bootloader (In saying that, I'm running it with CM9, but I didn't muck around with stock versions of ICS beforehand which might have changed it to a BL which doesn't work with CM9). If in doubt, ask the developer of the custom rom you're using if it works OK with the old bootloader (I presume you want to get rid of the boot triangle ?).
Obviously you run a very small risk of bricking your phone every time you flash anything, and you only flash/mess with bootloaders when you have a specific reason for same.
Having to send your phone to Samsung/your carrier for warranty service is one of those reasons, and if you've gone back to stock & your jig won't work, flashing the old bootloader is a simple no mucking around way of getting it done.
JoshS2 said:
Is flashing the old bootloader safe on a custom ROM? Even if it's an AOKP ROM? Cheers.
Click to expand...
Click to collapse
MistahBungle said:
Yep.
However, some roms may not boot with the old bootloader (In saying that, I'm running it with CM9, but I didn't muck around with stock versions of ICS beforehand which might have changed it to a BL which doesn't work with CM9). If in doubt, ask the developer of the custom rom you're using if it works OK with the old bootloader (I presume you want to get rid of the boot triangle ?).
Obviously you run a very small risk of bricking your phone every time you flash anything, and you only flash/mess with bootloaders when you have a specific reason for same.
Having to send your phone to Samsung/your carrier for warranty service is one of those reasons, and if you've gone back to stock & your jig won't work, flashing the old bootloader is a simple no mucking around way of getting it done.
Click to expand...
Click to collapse
I just got my phone back from repair and they upgraded it to the latest version of ICS with the ICS Bootloader. I've flashed Hydrogen-ICS and I've got the yellow triangle, obviously the USB jig won't sort it because of the bootloader. There's no disadvantage to having the triangle other than if I need to send it back under warranty is there? I think I might just leave it and sort it if the time comes.
Ahhhh OK. Gotcha
No, the triangle is only a 'cosmetic' thing. You could probably flash the old bootloader, get rid of the triangle, flash the new bootloader, and be on your merry way. But if it doesn't bother you & you've got Hydrogen running the way you want & everything is hunky dory otherwise, there's no need to do it
JoshS2 said:
I just got my phone back from repair and they upgraded it to the latest version of ICS with the ICS Bootloader. I've flashed Hydrogen-ICS and I've got the yellow triangle, obviously the USB jig won't sort it because of the bootloader. There's no disadvantage to having the triangle other than if I need to send it back under warranty is there? I think I might just leave it and sort it if the time comes.
Click to expand...
Click to collapse
MistahBungle said:
Ahhhh OK. Gotcha
No, the triangle is only a 'cosmetic' thing. You could probably flash the old bootloader, get rid of the triangle, flash the new bootloader, and be on your merry way. But if it doesn't bother you & you've got Hydrogen running the way you want & everything is hunky dory otherwise, there's no need to do it
Click to expand...
Click to collapse
Ah right, I think I will just leave it for now as it doesn't really bother me! Thanks!
When i flashed back the triangle was gone and i used the branded rom so it has the three network boot logo again just like the day i pulled it out the box all the same apps and it worked like normal in kies i even had a successful update in kies. Though it took some work didnt reconize the device after a good 30mins of pluging and pulling and restarting. I also found some apps can stop kies working apparently, ones from market not on pc. And i had a custome 2.3.6. I just fancied having back to normal till i get bored again.
man you guys need to learn........... ics bootloader use triangle away, is that simple.
atifsh said:
man you guys need to learn........... ics bootloader use triangle away, is that simple.
Click to expand...
Click to collapse
I don't understand what you mean by that? Mine doesn't?
arranstobbs said:
I don't understand what you mean by that? Mine doesn't?
Click to expand...
Click to collapse
"Triangle Away" is an app by Chainfire on the Play Store. Costs a couple bucks, but you don't have to flash an old bootloader and/or wait for a USB jig to get to you, which is your other option.
http://forum.xda-developers.com/showthread.php?t=1494114
atifsh said:
http://forum.xda-developers.com/showthread.php?t=1494114
Click to expand...
Click to collapse
Forgot about the XDA exclusive that's free. But seeing all the good work Chainfire does, when I finally do go to ICS, I'll buy it on the Play Store to throw him a couple bucks. He deserves it.
You can avoid the counter increase, simply flash your archives via CWM instead of doing it via Odin. It won't update the counter, so the triangle won't appear
Joravis said:
You can avoid the counter increase, simply flash your archives via CWM instead of doing it via Odin. It won't update the counter, so the triangle won't appear
Click to expand...
Click to collapse
wow someone need to fix his knowledge for this!
---------- Post added at 10:58 AM ---------- Previous post was at 10:51 AM ----------
tutorial kinda................ thats how i run
1: flashed cwm (attached) via odin
2: wiped everything, including system
3: flashed stock ICS via odin
4: rooted via cf-root
5: used triangle away to reset counter and triangle
6: install mobile odin
7: flashed the cwm kernel extracted from the same and flashed using mobile odin [zimage]
8: now i have cwm without counter and triangle.
9: flashed cm9 using cwm
now i can flash whatever rom via cwm, without counter issue.
you want to flash kernel use mobileodin again and you wont update counter.
hope this helps.
EDiT: odin is 99.9% for stock ROM's thus will not raise counter. only when you flash cwm for the first time with odin you get counter + triangle.
hope this helps.
Hi all.
My SGS2 needs to be sent in for repairs in the imminent future, and in preparation I unrooted my phone and flashed a Stock ICS build (my carrier is Optus, Australia). Before this I was running a few different GB roms. When I boot my phone I do not get the yellow triangle (I assume this is because I am running official Samsung firmware), but if I put the phone into download mode, it still shows the 8 custom flashes I did earlier.
My real question is will Chainfire's Triangle Away app remove the binary count even if the triangle isn't there?
And a better question would be, would having official firmware be enough to still claim warranty, or would I need to have both official firmware and a "0" custom flash count?
Thanks for any help!
I believe Samsung may throw a stink about the counter, even if you are on stock/official firmware. This counter would imply that you have voided your warranty previous to the current state of the phone and it's OS
To be safe I would use the Triangle away app
EDIT: Yes, the app does reset the flash counter. See https://play.google.com/store/apps/details?id=eu.chainfire.triangleaway&hl=en
Its always safe to clear the counter before returning it for service. yes the triangle away app will clear the counter with/without triangle.
download it for free from here
http://forum.xda-developers.com/showthread.php?t=1494114
Thanks guys!
I tried to run the app but it's telling me I need Superuser access...
Does this mean I need to root the phone, use the triangle away app, then UNroot the phone?
Sorry if this is obvious... Not overly confident of my ability to keep the phone unbricked haha.
sdardz said:
Thanks guys!
I tried to run the app but it's telling me I need Superuser access...
Does this mean I need to root the phone, use the triangle away app, then UNroot the phone?
Sorry if this is obvious... Not overly confident of my ability to keep the phone unbricked haha.
Click to expand...
Click to collapse
You are correct. Root the phone first, use the app, then unroot.
Thanks!
So it will still think it's Samsung official after that process?
You'll need a rooted ICS firmware already on your phone.
Check the Triangle Away forum to ensure its working with your firmware version.
Flash Triangle Away, this will remove Yellow Triangle and reset Custom Counter to 0.
Flash official unrooted firmware using Odin, this wont increase your Custom Counter as its official. Use a firmware thats specific to your region.
http://forum.xda-developers.com/showthread.php?t=1075278
Job done.
Also check my sigi for links
Thanks! This forum is full of amazing help.
So theoretically I could follow those steps then flash the stock ROM a thousand times and the flash counter would remain at 0?
If it makes you feel any better I went to Optus 3 weeks ago with a phone that wouldn't turn on with ICS for another region with root and they fixed it.
I think my USB jig cleared the counter to 0 though. I couldn't connect my phone to dl mode or anything
The app removes the triangle as well as the counter
Yeah I tried using the jig a while ago but I think I have the newer bootloader, so it didn't do anything, which was very disappointing.
I'd just hate to take it in then have them tell me to get bent because I rom'ed it.
Ok so let me know if theres a problem with my process.
I'm using ICS and the kernel is XWLP4.
There was no LP4 in Chainfires thread but I read that I could use the next closest one. So I should flash something like "CF-Root-SGS2_XW_O2U_LP3-v5.4-CWM5.zip" and then triangle away then use the Optus stock ICS?
UPDAT: I tried this method and it worked perfectly! Thanks so much to everyone who helped.
has worked like a charm for me everytime i put stock firmwares on my phone
Safest way is to flash a really old firmware and thus flashing the old bootloader. Now reset the counter with an usb jig. Done.
Sent from my Transformer TF101 using Tapatalk 2
d3l1 said:
Safest way is to flash a really old firmware and thus flashing the old bootloader. Now reset the counter with an usb jig. Done.
Sent from my Transformer TF101 using Tapatalk 2
Click to expand...
Click to collapse
Or just flash the old bootloader.
Can someone explain to me what trip counter means? Where do I see if mine is tripped or not?
It is a counter on your phone that trips if you have installed custom firmware. Sorry to say I can't tell you where to look because I don't care about mine
Sent from my GT-I9300 using Tapatalk 2
Trip Counter (Binary Download Counter)
1. Power off Phone
2. Hold Volume- (Down) and Home Key and Power at same time. Let phone boot. While holding all three keys.
3. Once in download mode press Volume+ (up)
Here you can see the counter.
Coustom Binary Download: No
Or
Coustom Binary Download: Yes (2 counts)
how ever many counts you have.
To exit hold power button for about 10 seconds. Then press again to power up phone. (Or Pull Battery)
No this will not trip counter.
is there any way to reset the counter?
dearbeloved said:
is there any way to reset the counter?
Click to expand...
Click to collapse
not on the USA variants
djricekcn said:
not on the USA variants
Click to expand...
Click to collapse
Triangle away doesn't work on the us variants?
Gadgetz said:
Triangle away doesn't work on the us variants?
Click to expand...
Click to collapse
As far as I understand, no it doesn't work and if you try on the USA one, it could potentially brick your phone. I didn't want to take the risk so didn't use it, but I think the author himself said USA Variants not supported.
I rooted using the general root before knowing anything about the flash counter (coming from HTC, dont know the Sammy ways yet). After i found out, I finished with the Root without tripping the flash counter tutorial and it says "1" when i boot into download mode.
Since i have done the tutorial will my counter always stay at "1" or if i flash another rom or mod will it start adding up?
Im just wanting to know if i need to be careful with going flash crazy or not.
thanks.
dearbeloved said:
I rooted using the general root before knowing anything about the flash counter (coming from HTC, dont know the Sammy ways yet). After i found out, I finished with the Root without tripping the flash counter tutorial and it says "1" when i boot into download mode.
Since i have done the tutorial will my counter always stay at "1" or if i flash another rom or mod will it start adding up?
Im just wanting to know if i need to be careful with going flash crazy or not.
thanks.
Click to expand...
Click to collapse
It'll keep going up unless if it's your carrier's official rom, and to be honest, once you get "1" I don't think it matters if you have "2" or "48190238102931"
dearbeloved said:
I rooted using the general root before knowing anything about the flash counter (coming from HTC, dont know the Sammy ways yet). After i found out, I finished with the Root without tripping the flash counter tutorial and it says "1" when i boot into download mode.
Since i have done the tutorial will my counter always stay at "1" or if i flash another rom or mod will it start adding up?
Im just wanting to know if i need to be careful with going flash crazy or not.
thanks.
Click to expand...
Click to collapse
I'm no expert, but from all the reading I've done I have concluded that flashing non-Samsung content via Odin is what trips the flash counter, flashing a rom via CWM will not.
Gadgetz said:
I'm no expert, but from all the reading I've done I have concluded that flashing non-Samsung content via Odin is what trips the flash counter, flashing a rom via CWM will not.
Click to expand...
Click to collapse
I can confirm that.
dasistsparta said:
I can confirm that.
Click to expand...
Click to collapse
not doubting you but wanted to be sure if true for all roms and i guess maybe even carrier models? Some of the sites I read said other wise. Also, you need to raise the counter at least "1" time to get Root Access though, no?
which means we still need a reset app like the international ver. have.
..and what is max I can do ? Or does it matter if I have 500 counts? What is it for? Dees it hurt me in any kind of way?
mine says "custom binary download: yes (1 count)
I installed 2 roms (same rom just updated version)
djricekcn said:
not doubting you but wanted to be sure if true for all roms and i guess maybe even carrier models? Some of the sites I read said other wise. Also, you need to raise the counter at least "1" time to get Root Access though, no?
which means we still need a reset app like the international ver. have.
Click to expand...
Click to collapse
Negative. I just rooted and installed CWM on my AT&T GS3 and my counter is still at 0. Flashing via Odin is what trips the flash counter, flashing through CWM doesn't. That being said, I'd imagine most if not all devs are going to make their roms flashable zips so we don't have to worry about the counter. I rooted via Odin but didn't trip the counter thanks to the devs who figured out a way to get around it. The thread is stickied in the AT&T dev forum.
Gadgetz said:
Negative. I just rooted and installed CWM on my AT&T GS3 and my counter is still at 0. Flashing via Odin is what trips the flash counter, flashing through CWM doesn't. That being said, I'd imagine most if not all devs are going to make their roms flashable zips so we don't have to worry about the counter. I rooted via Odin but didn't trip the counter thanks to the devs who figured out a way to get around it. The thread is stickied in the AT&T dev forum.
Click to expand...
Click to collapse
well, i have tmo phone and my counter is currently at [1] so I need a reset somehow
djricekcn said:
well, i have tmo phone and my counter is currently at [1] so I need a reset somehow
Click to expand...
Click to collapse
I don't think there's a method out to do that yet, sit tight.
..and what is max I can do ? Or does it matter if I have 500 counts? What is it for? Does it hurt me in any kind of way?
there's no max, its just a way of voiding warranty
So we need to brick our phone good enough that they cant read the counter to get warranty replacement???
once the counter is [1] or higher,you already voided your warranty...there's really no max out or loop back to [0]
Has any one rooted their phone, un-rooted, then returned for a warranty claim? Did they run into any issue doing so? My speaker is buzzing and it seems to be getting worse. Running just the stock rom rooted.
http://forum.xda-developers.com/showthread.php?t=2024207
Travisdroidx2 said:
http://forum.xda-developers.com/showthread.php?t=2024207
Click to expand...
Click to collapse
Thanks for the reply but I was looking for someone that has returned their rooted phone.
You may know this, does Verizon have a check for it?
Should I expect the rep to know how to get it to show him how many times I have flashed a ROM? (Power off, downbutton volume, power button, etc)? Or for them to hook it up to their computer via usb? Or am I giving them too much credit?
Use triangle away to clear flash counter and return to stock Odin to return to stock. Do you know how to check your flash counter? There are other threads in here about your same question.http://forum.xda-developers.com/showthread.php?t=2077511
Travisdroidx2 said:
Use triangle away to clear flash counter and return to stock Odin to return to stock. Do you know how to check your flash counter? There are other threads in here about your same question.http://forum.xda-developers.com/showthread.php?t=2077511
Click to expand...
Click to collapse
Thanks. Didn't even know that is what is was called.
ok Checked mine. interesting the firstime it came up as
Custom Binary-No
Current: Samsung Official
System status: Official.
But I checked it again and now it says
Custom Binary-No
Current: Samsung Official
System Status: Custom
So your counter is at 0 so if you Odin back to stock from imnuts. That should put you back to official. I believe from what I have read. I have not had to do this myself yet. You tube has a video on it also.
I had to send my sprint note 2 to samsung for repair on the power button. I odined to stock made sure it didn't say modified under status. Didn't bother checking the flash count. They repaired sent back within 14 business day time frame no problems.
nycdarkness said:
I had to send my sprint note 2 to samsung for repair on the power button. I odined to stock made sure it didn't say modified under status. Didn't bother checking the flash count. They repaired sent back within 14 business day time frame no problems.
Click to expand...
Click to collapse
I
Guess I still don't know how to check the flash count.
Flash counter is the binary count. If you had numbers after it that would be your count. You are at 0 if you do not see any numbers after binary.
Travisdroidx2 said:
Flash counter is the binary count. If you had numbers after it that would be your count. You are at 0 if you do not see any numbers after binary.
Click to expand...
Click to collapse
I guess my last question is, if I am already on the stock rooted rom I read in the post that
"How to unroot stock 4.1.1 Jelly Bean
- There are only two additional files added to the rooted stock odin image, /system/xbin/su and /system/app/Superuser.apk.
- If you remove those two files with a app such as filemanager and reboot, you will be back to unrooted stock.
"
If I delete these files do I need to flash the stock rom again back with ODIN? Will TWRP still be installed? I guess I would just be unrooted but the bootloader would be unlocked?
Download screen might still show custom without Odin back to stock? Not sure you can try and check worse case you have to Odin.
Hi All,I'd be greatful if someone can advise me. My phones counter has changed to 1 annoyed because i wasn't on custom firmware or rooted at the time, i just reset my normal official firmware and the counter went up to 1. i need to change it back to 0 but it seems to be much harder than previous when ive done this.I rooted the s3 and have a custom firware on it just so i could install triangle away and reset the counter but the counter wont go below 1 anymore.i have tried to pull the battery just before the samsung logo s3 but its not working this time. I understand a stock recovery/bootloader would enable the counter to set to 0 without having to try and pull the battery. I am currently running team win recovery project 2.3.3.0.Anyone know where i get the stock from which I can run while rooted I assume or any other helpful tips?CheersFei
Faqs and Guides free .
Read the return to stock for warranty post.
jje
fatfei said:
Hi All,I'd be greatful if someone can advise me. My phones counter has changed to 1 annoyed because i wasn't on custom firmware or rooted at the time, i just reset my normal official firmware and the counter went up to 1. i need to change it back to 0 but it seems to be much harder than previous when ive done this.I rooted the s3 and have a custom firware on it just so i could install triangle away and reset the counter but the counter wont go below 1 anymore.i have tried to pull the battery just before the samsung logo s3 but its not working this time. I understand a stock recovery/bootloader would enable the counter to set to 0 without having to try and pull the battery. I am currently running team win recovery project 2.3.3.0.Anyone know where i get the stock from which I can run while rooted I assume or any other helpful tips?CheersFei
Click to expand...
Click to collapse
What state do you want the phone to be in? Do you want to continue running modified with counter of 0, or do you want to return to full stock with counter of 0?
There are several guides here on exactly how to do this, search and read for the full info.
To my knowledge you will have to downgrade your bootloader to the ICS version before factory reset, run triangle away then immediately flash stock recovery and ROM from Odin.
I've not done the above myself, so I'd recommend you read up first.
rootSU said:
What state do you want the phone to be in? Do you want to continue running modified with counter of 0, or do you want to return to full stock with counter of 0?
Click to expand...
Click to collapse
I want to return to stock because it needs to go to the shop. But the custom bootloader isnt letting the counter turn to 0 I read this is because its not stock. I tried pulling the battery before samsung logo after triangle reboots after resetting the counter but with this firmware its just not going back to zero. I understand I cant put stock firmware on until the counter is at zero because I won't be able to be rooted to use triangle.
Id just like to know what stock bootloader I should use to reset the counter. Then I can return to stock.
Thank you for replying
boomboomer said:
There are several guides here on exactly how to do this, search and read for the full info.
To my knowledge you will have to downgrade your bootloader to the ICS version before factory reset, run triangle away then immediately flash stock recovery and ROM from Odin.
I've not done the above myself, so I'd recommend you read up first.
Click to expand...
Click to collapse
Thanks that's what I thought but dont know where I get the bootloader from
fatfei said:
Thanks that's what I thought but dont know where I get the bootloader from
Click to expand...
Click to collapse
There are 2 methods.
1) Reset with triangle away and interupt reboot (pull battery immediately after Triangle away). This may take several attempts to get right. Then you boot into download mode. If binary counter is "0" (regardless of modified status = custom) then flash via odin
2) Flash an old bootloader (4.1.1) which you can get from any 4.1.1 official ROM on sammobile.com. There is a link to an ics bootloader in my SDS thread at the very bottom of the post too
http://forum.xda-developers.com/showthread.php?t=2091045
rootSU said:
There are 2 methods.
1) Reset with triangle away and interupt reboot (pull battery immediately after Triangle away). This may take several attempts to get right. Then you boot into download mode. If binary counter is "0" (regardless of modified status = custom) then flash via odin
2) Flash an old bootloader (4.1.1) which you can get from any 4.1.1 official ROM on sammobile.com. There is a link to an ics bootloader in my SDS thread at the very bottom of the post too
http://forum.xda-developers.com/showthread.php?t=2091045
Click to expand...
Click to collapse
installed the other cfw and managed to reset the counter to 0 but this is my problem having checked a few times the counter went back up to 1 . it did this when i was in stock yesterday hence why i have had to do all this. Why is it counting up on its own?
fatfei said:
installed the other cfw and managed to reset the counter to 0 but this is my problem having checked a few times the counter went back up to 1 . it did this when i was in stock yesterday hence why i have had to do all this. Why is it counting up on its own?
Click to expand...
Click to collapse
Bootloaders since 4.1.2 and some 4.1.1 count the binary at every boot, which is why you must flash an ICS bootloader.
You also need to ensure you have stock kernel, stock recovery.
IMHO the best process would be:
Flash full stock with ODIN now.
Root with CF-AUTO root (must be AUTO) as this doesnt modify kernel or recovery
Then you should be able to triangle away and not go back to 1 on reboot.n ***If still not reset, flash ICS bootloader, then try triangle away again.
Flash stock again
rootSU said:
Bootloaders since 4.1.2 and some 4.1.1 count the binary at every boot, which is why you must flash an ICS bootloader.
You also need to ensure you have stock kernel, stock recovery.
IMHO the best process would be:
Flash full stock with ODIN now.
Root with CF-AUTO root (must be AUTO) as this doesnt modify kernel or recovery
Then you should be able to triangle away and not go back to 1 on reboot.n ***If still not reset, flash ICS bootloader, then try triangle away again.
Flash stock again
Click to expand...
Click to collapse
I flashed with CF-Auto-Root-m0-m0xx-gti9300.tar.md5 and run triangle but everytime a remove battery successfully and restart it immediately goesinto boot loader again where i have to reboot if i want to load the rom at which point the exclamation comes back
fatfei said:
I flashed with CF-Auto-Root-m0-m0xx-gti9300.tar.md5 and run triangle but everytime a remove battery successfully and restart it immediately goesinto boot loader again where i have to reboot if i want to load the rom at which point the exclamation comes back
Click to expand...
Click to collapse
From a completely STOCK, unrooted ROM?
rootSU said:
From a completely STOCK, unrooted ROM?
Click to expand...
Click to collapse
Sorry i am getting so confused with firmwares, roms and bootloaders now ive got totally confused. I'll read up on everything again to try and get an understand because i don't want to waste your time and ask something silly. As it stands this is where i am. i have installed cf auto root, used triangle and pulled battery and immediatly gone into download mode where the counter is saying no. Which is good. I was now intending to install the official rom from sammy for uk
fatfei said:
Sorry i am getting so confused with firmwares, roms and bootloaders now ive got totally confused. I'll read up on everything again to try and get an understand because i don't want to waste your time and ask something silly. As it stands this is where i am. i have installed cf auto root, used triangle and pulled battery and immediatly gone into download mode where the counter is saying no. Which is good. I was now intending to install the official rom from sammy for uk
Click to expand...
Click to collapse
Yeah have a look on teh last page. I think to give us a clean starting point, you should flash back to stock first, then CF auto root...
rootSU said:
Yeah have a look on teh last page. I think to give us a clean starting point, you should flash back to stock first, then CF auto root...
Click to expand...
Click to collapse
yeah agrred. Thanks mate
fatfei said:
yeah agrred. Thanks mate
Click to expand...
Click to collapse
Okay i re-installed the stock rom from the download mode i was already on then hard reset after from bootloader, the red exclamation mark has gone, the count says no still and the device status in settings is saying normal. so i assume this is fit to go back to the shop. I dont know why the count went up on its own in the first place, my phone just freaked out and started to reboot randomly and caused the count to go to 1 which is really annoying because i would have been blamed for something i didnt do.
Thank you so much for the assistance
fatfei said:
Okay i re-installed the stock rom from the download mode i was already on then hard reset after from bootloader, the red exclamation mark has gone, the count says no still and the device status in settings is saying normal. so i assume this is fit to go back to the shop. I dont know why the count went up on its own in the first place, my phone just freaked out and started to reboot randomly and caused the count to go to 1 which is really annoying because i would have been blamed for something i didnt do.
Thank you so much for the assistance
Click to expand...
Click to collapse
no worries.