How to get Samsung Galaxy S2 back to 4.1.2? - Galaxy S II Q&A, Help & Troubleshooting

Basically, I put my phone back to 4.0.3 ICS for some stupid thing :crying:, now I want to put 4.1.2 back on to it. I start Odin and load the PDA and it says '<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9100_XEU_I9100XWLP7_I9100XXLPS_I9100XEULP5.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS.. '
Then I click start and straight away after clicking start it says ' <OSM> All threads completed. (succeed 0 / failed 0) ', and it keeps saying it.
What do I do then PLEASE?

1) Manners will get you a lot of help here. Please is a good start.
2) Different variations of 'Odin won't work/flash' get covered here dozens of times per week (at least). Rule 1 is search before posting. Search for/read those threads; you might just fix your phone if you do.

SAMSUNGKID123 said:
Basically, I put my phone back to 4.0.3 ICS for some stupid thing :crying:, now I want to put 4.1.2 back on to it. I start Odin and load the PDA and it says '<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9100_XEU_I9100XWLP7_I9100XXLPS_I9100XEULP5.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS.. '
Then I click start and straight away after clicking start it says ' <OSM> All threads completed. (succeed 0 / failed 0) ', and it keeps saying it.
What do I do then PLEASE?
Click to expand...
Click to collapse
Root you phone and flash 4.1.2 with Mobile Odin

Says the guy who still hasn't managed to do what he was trying to do two days ago (Nor has he had any significant help) ┌∩┐(◣_◢)┌∩┐

MistahBungle said:
Says the guy who still hasn't managed to do what he was trying to do two days ago (Nor has he had any significant help) ┌∩┐(◣_◢)┌∩┐
Click to expand...
Click to collapse
Odin noob detector activated in a millisecond

OP please stop creating multiple threads for the same issue. The forums have enough spam in them without you adding to it thanks very much. I have deleted the duplicate threads.

Related

Problem with Flashing a New Rom

Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Litening_Rom_v1-0.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
i always get this message but nothing hapens den.
it is rooted and booted from the boot loader

[Q] Recvering with Odin failed

I have the galaxy s2 Gt-i9100 that my brother rooted and unlocked.
I was booting it up with the liquid smooth Rom and it went in a boot loop. However I was able to boot into the liquid smooth ROM fine before.
I went in to recovery mode and tried to factory reset it and this is what it said
CMW-based Recovery v6.0.3.2
E:Can't mount /cache/recovery/command
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery /last_log
-- Wiping data ...
Formatting /data ...
Then it restarts and boot loops
The second thing I tried was using Odin I used v3.0 and 1.83. All the youtube videos where what I was looking for but when I tried it would just sit their for at least 15 to 25 minutes. I will give you what Odin put out
the md5 file that i am using is I9100XWLP7_I9100XXLPS_I9100XEULP5_Home.tar.md5
this is on Odin v1.83
<OSM> Enter CS for MD5 . .
<OSM> Cheack MD5. .Do not unpluge the cable. .
<OSM>I9100XWLP7_I9100XXLPS_I9100XEULP5_Home.tar.md5
<OSM>Checking MD5 finished Sucessfuly..
<OSM> Leave CS . .
<OSM> All threds completed. (succeed 0 / failed 0 )
<OSM> Enter CS for MD5 . .
<OSM> Cheack MD5. .Do not unpluge the cable. .
<OSM> Please wait. .
<OSM> I9100XWLP7_I9100XXLPS_I9100XEULP5_Home.tar.md5
<OSM> Checking MD5 finished Successfully. .
<OSM> Leave CS . .
<OSM> All threds completed. (succeed 0 / failed 0 )
We tried using a different USB port and got this.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLP7_I9100XXLPS_I9100XEULP5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLP7_I9100XXLPS_I9100XEULP5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/012> Added!!
Any suggestions on what to do? I have searched for s2 recovery and have attempted to use hemidal (<- spelling?) And it failed to find the correct drivers. I understand its my fault for taking the risk and breaking it but suggestions and links would be helpful. Should I try different drivers? Different .tar files.? I am really surprised that Odin didn't work. Also I understand the error that CWM recovery gave me in general but I don't understand it well if any one could explain it I would love to know.
'Odin doesn't work' gets covered here lots of times each week. There are a set of troubleshooting steps you need to do. Search for similar threads, or look for Hopper8's thread about this subject - very detailed (search his posts specifically & you should find it easily).
Is this the error your getting.
-------------------------------------------
maybe your an iphone expert
------------------------------------------
this is what my phone pop up
What does it say in cwm>mounts and storage.
-------------------------------------------
maybe your an iphone expert
------------------------------------------
ok I so i tryed to mount the system an dit did not seem to do any thing gust got stuck at this screen and then rebooted
Is their anything specific that you wanted me to try to mount
If everythings mounted as it should be,and you cant do any wipes etc,all I can say is remove the sdcard and see if it boots.
-------------------------------------------
maybe your an iphone expert
------------------------------------------
Flash jb leak:
PDA : LSJ
PHONE: LS6
CSC: LS1
Sent from...this is not even my S2
i never had an sd card in it. soo yeah
where should i get the downloads for odin ... if that is Odin.
Google or XDA search.
google or xda search what? oh and nothing can mount does anybody know why
Didn't you ask where you could download Odin ? (If that's not what you meant, you need to be a lot less vague/more specific), if you did - do a Google search - easily found.
If you're talking about stock roms to flash with Odin, go to Samfirmware.
If you cant flash,or do anything in cwm then youve got to get pc odin to work somehow.
-------------------------------------------
maybe your an iphone expert
------------------------------------------

Odin acting weird?

When I try to flash with Odin, nothing happens! This is what is says:
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_S5830i_XXLI1.tar.md5 is valid.
<OSM> MODEM_S5830i_DDLI1.tar.md5 is valid.
<OSM> CSC_S5830i_ODDLI1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
And nothing happens to my Ace! Help!
superboySR said:
When I try to flash with Odin, nothing happens! This is what is says:
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_S5830i_XXLI1.tar.md5 is valid.
<OSM> MODEM_S5830i_DDLI1.tar.md5 is valid.
<OSM> CSC_S5830i_ODDLI1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
And nothing happens to my Ace! Help!
Click to expand...
Click to collapse
Follow these TUT
Download one firmware packed by him and try with that.

[Q] Odin not working (succeed 0 / failed 0)

Okay so was needing to flash the stock rom back onto my Galaxy Ace GT-S5830i as CWM could not mount /data, /system, /cache or usb and therefore I couldn't install any roms. I have managed to get my phone into download mode, I plugged it into my PC (I believe I have the latest drivers - no kies) but that brought up the device not recognised error on my PC. I decided to ignore this and carry on. I load up Odin3 v3.07 and put the stock md5 into the pda section. This is the output I get:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_S5830i_XXLI1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
I then proceed to press the start button and nothing changes other than I recieve this message:
Code:
<OSM> All threads completed. (succeed 0 / failed 0)
I try again and get the same again. Tried rebooting into download mode again and it's still the same.
What can I do? What could be causing this?
Thanks in advance, Kyle.

Trying to root G925FXXS5DQC1

<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-zerolte-zeroltexx-smg925f.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
THis is the error I'm getting in Odin. I've tried twrp but it went straight to <OSM> All threads completed. (succeed 0 / failed 0)
Sure I'm doing something wrong...help please! Not even sure I've downloaded the right AP
Download SkipSoft Toolkit, go through the versions to select which model phone you have, which version of android you're running etc. and then install all the drivers it offers. Then follow everything it says on how to flash and install custom recovery and you should be set.
Prouty said:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-zerolte-zeroltexx-smg925f.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
THis is the error I'm getting in Odin. I've tried twrp but it went straight to <OSM> All threads completed. (succeed 0 / failed 0)
Sure I'm doing something wrong...help please! Not even sure I've downloaded the right AP
Click to expand...
Click to collapse
Go to phone settings > about phone > software info> tap build number 7 times to enable developer options
Go to developer options and enable USB debugging and OEM unlock.
For TWRP:
Download this TWRP file the tar.img
https://eu.dl.twrp.me/zerolte/twrp-3.1.1-0-zerolte.img.tar.html
Put phone in download mode, vol down + home + power and connect to Odin. In Odin it should say added and com box go blue.
Insert the TWRP file to AP and start. Phone should reboot to TWRP.
For root:
Flash this root file through AP in Odin. Same as before with TWRP.
https://download.chainfire.eu/737/CF-Root/CF-Auto-Root/CF-Auto-Root-zerolte-zeroltexx-smg925f.zip
Or:
Flash SuperSU through TWRP from here
http://www.supersu.com/

Categories

Resources