Help Please?
I had my Galaxy Pocket rooted and got the Jellyblast v3 rom, it was doin fine until I checked on the app OTA and check for update, a new update appeared which is the Nemesis 2.5 Hybrid-Holo Editon. It asked me to download it and so I did. When it was done, it asked me if I wanted to install it and so I did, and rebooted. Later I noticed that it was already boot looping. I tried pulling the battery off and to clockwork mode, with the proper procedure..the holds and presses, but still it just kept boot looping. Tried to connect it to the PC using the USB chord and yet it just shows the charging icon and sooner it turns to white. I tried Kies but still it turned white screen all over again; no device found.
Can someone PLEASE help me with this one? PLEASE, PLEASE guys? I know you guys are knowledgable on these kind of issues. :crying:
ShogunSam said:
Help Please?
I had my Galaxy Pocket rooted and got the Jellyblast v3 rom, it was doin fine until I checked on the app OTA and check for update, a new update appeared which is the Nemesis 2.5 Hybrid-Holo Editon. It asked me to download it and so I did. When it was done, it asked me if I wanted to install it and so I did, and rebooted. Later I noticed that it was already boot looping. I tried pulling the battery off and to clockwork mode, with the proper procedure..the holds and presses, but still it just kept boot looping. Tried to connect it to the PC using the USB chord and yet it just shows the charging icon and sooner it turns to white. I tried Kies but still it turned white screen all over again; no device found.
Can someone PLEASE help me with this one? PLEASE, PLEASE guys? I know you guys are knowledgable on these kind of issues. :crying:
Click to expand...
Click to collapse
I also received the same message and downloaded the update file. when ask to Reboot & Install i selected install the device booted in CWM and i selected update from .zip and selected the downloaded file in OTA Download Folder.
The update was successful, yet the ROM looks in BETA version.
Following are the issues i am currently facing in the updated ROM
1. Gallery ICS was Force Closed, later it was solved via uninstalling update.
2. Quick Panel, Nemesis Hub, Nemesis Owner Info & Nemesis Sound Boosters are giving FC messages.
3. OTA is giving INVALID ROM Message while updating.
I´m having the same issues.
After downloading and installing the OTA update, my device is keep stucking in the boot loop.
When I do to the recovery, I always get automatic update with the update.zip, which means I can't get into the full recovery to select another functional image.
Well I hope it's not bricked. Is there a sollution?
Thanks
I have repaired that throught ODIN MODE, like described here:
http://forum.xda-developers.com/showthread.php?t=1921421&highlight=s5300
ShogunSam said:
Help Please?
I had my Galaxy Pocket rooted and got the Jellyblast v3 rom, it was doin fine until I checked on the app OTA and check for update, a new update appeared which is the Nemesis 2.5 Hybrid-Holo Editon. It asked me to download it and so I did. When it was done, it asked me if I wanted to install it and so I did, and rebooted. Later I noticed that it was already boot looping. I tried pulling the battery off and to clockwork mode, with the proper procedure..the holds and presses, but still it just kept boot looping. Tried to connect it to the PC using the USB chord and yet it just shows the charging icon and sooner it turns to white. I tried Kies but still it turned white screen all over again; no device found.
Can someone PLEASE help me with this one? PLEASE, PLEASE guys? I know you guys are knowledgable on these kind of issues. :crying:
Click to expand...
Click to collapse
I have the exact problem. I just can not do anything.No connection to PC I dont know what to d.o Did you solve the problem ShougunSam?
I get the exact same error, and its annoying because I cant use my phone! If anyone can help us.. thanks
Rawhabbero said:
I get the exact same error, and its annoying because I cant use my phone! If anyone can help us.. thanks
Click to expand...
Click to collapse
For all the SGY Users who are facing issues after updating Jellyblast 3.5 to Nemesis (I faced it too) here is the guide to recover your phone:-
First to repair your phone you have to flash stock rom via odin .
Here's the guide for Flashing Stock Rom via Odin
Requirement: 1. A Samsung Galaxy y phone model gt-s5360.
2. A computer running on windows xp, vista, win7 or win8 with proper USB driver installed to connect your phone to computer {If you have not installed USB Driver for Samsung Galaxy Y then to Install USB Driver}
3. Stock Rom file : you can download stock rom according to your choice and region from the xda thread http://forum.xda-developers.com/showthread.php?t=1465800e
4. download ODIN: 1 .85.(google it as i cannot post outside links)
Installation Instruction : [ Charge your phone battery min 80%]
1. Download the required file Odin AND Stock Rom. zip and place in a folder on your desktop .
2. Now extract both with any file extractor.-- Odin v1 .85 .zip and the stock rom zip( file which contains the stock rom i. e 2 .3 .6 )
After that extract Stock Rom file after unzipping you will get three files :
PDA _S5360 _DDLK2.tar,
MODEM_ S5360 _DDLK2.tar &
CSC_S 5360 _DDLK2 .tar
3. Now turn off your Galaxy Y {Remove the battery for 5 -10 seconds and insert it back }
4. Go to Download Mode by Pressing Volume down + Home + Power for 5- 10 sec to boot in Download Mode
5. Now you entered in Download mode select continue by pressing Volume up button .
6. Now attach/ connect your phone to computer via USB cable .
7. Now on your computer open Odin v 1 .85. exe
8.Now make sure you are getting yellow box in ID:COM ( this means that your device is now connected and detected by odin )
9.Now Select those 3 files u download before
PIT - "totoro_0623.pit"
BOOTLOADER - "BOOT" file.
PDA - "PDA" file.
PHONE - "MODEM" file.
CSC - "GT-s5360- MULTI-CSC" file.
10.Now clik on start .
And let be ODIN do its work and wait till you see PASS in green colour it mean the flashing process is complete successfully . Samsung
11.Remove your phone from pc 12.Galaxy Y will auto reboot .
Now if you want to install nemesis Rom, you have to install the nemesis Rom 2.0 (Nemesis Titanium) first and than you should update the Rom by downloading the update file via OTA and flashing the zip file through CWM.
I hope my suggestion will solve your problem.
Did you wipe data and wipe catch before installing ROM??
Did you try flashing original ROM with Odin or others??
---------- Post added at 07:53 PM ---------- Previous post was at 07:48 PM ----------
chaos titan said:
did you wipe data and wipe catch before installing rom??
did you try flashing original rom with odin or others??
Click to expand...
Click to collapse
plz reply
thanks
thepain20 said:
For all the SGY Users who are facing issues after updating Jellyblast 3.5 to Nemesis (I faced it too) here is the guide to recover your phone:-
First to repair your phone you have to flash stock rom via odin .
Here's the guide for Flashing Stock Rom via Odin
Requirement: 1. A Samsung Galaxy y phone model gt-s5360.
2. A computer running on windows xp, vista, win7 or win8 with proper USB driver installed to connect your phone to computer {If you have not installed USB Driver for Samsung Galaxy Y then to Install USB Driver}
3. Stock Rom file : you can download stock rom according to your choice and region from the xda thread http://forum.xda-developers.com/showthread.php?t=1465800e
4. download ODIN: 1 .85.(google it as i cannot post outside links)
Installation Instruction : [ Charge your phone battery min 80%]
1. Download the required file Odin AND Stock Rom. zip and place in a folder on your desktop .
2. Now extract both with any file extractor.-- Odin v1 .85 .zip and the stock rom zip( file which contains the stock rom i. e 2 .3 .6 )
After that extract Stock Rom file after unzipping you will get three files :
PDA _S5360 _DDLK2.tar,
MODEM_ S5360 _DDLK2.tar &
CSC_S 5360 _DDLK2 .tar
3. Now turn off your Galaxy Y {Remove the battery for 5 -10 seconds and insert it back }
4. Go to Download Mode by Pressing Volume down + Home + Power for 5- 10 sec to boot in Download Mode
5. Now you entered in Download mode select continue by pressing Volume up button .
6. Now attach/ connect your phone to computer via USB cable .
7. Now on your computer open Odin v 1 .85. exe
8.Now make sure you are getting yellow box in ID:COM ( this means that your device is now connected and detected by odin )
9.Now Select those 3 files u download before
PIT - "totoro_0623.pit"
BOOTLOADER - "BOOT" file.
PDA - "PDA" file.
PHONE - "MODEM" file.
CSC - "GT-s5360- MULTI-CSC" file.
10.Now clik on start .
And let be ODIN do its work and wait till you see PASS in green colour it mean the flashing process is complete successfully . Samsung
11.Remove your phone from pc 12.Galaxy Y will auto reboot .
Now if you want to install nemesis Rom, you have to install the nemesis Rom 2.0 (Nemesis Titanium) first and than you should update the Rom by downloading the update file via OTA and flashing the zip file through CWM.
I hope my suggestion will solve your problem.
Click to expand...
Click to collapse
IT STILL DOES NOT WORK! I flashed the device, and this is what i get every time! WHAT AM I DOING WRONG?
Related
Hi,
Please forgive the newb-ness, but I could really use some help in understanding how to update my Samsung Continuum to joshkoss' "Light EC07 Rom (beta3)."
I am brand new to the vocabulary and methods and I really don't understand what everything means.
I was hoping someone could kind of walk me through the steps outlined below, and give a dumbed down explanation of exactly what to do.
I have the phone (obviously), as well as the guide below, all the files have been downloaded, and I'm ready to go.
I just need someone to give a detailed version of the steps below...
1 Flash stock EC07 using Odin.
2 Plug your phone into your computer after your phone has rebooted 2 times and then backup and format the SD card.
3 Once you are done and into EC07 Stock, copy my rom onto your sdcard so you can flash it at the end of these steps
3.5 Please flash CWM 2.5 Kernal via odin and place this update on root of your sd card and boot into cwm 2.5
4 After flashing the above, boot back into CWM and then flash my rom
Click to expand...
Click to collapse
Use ODIN to Flash Your Samsung Android Devices
Odin is a windows application that can be used to flash different firmware onto various Samsung Android Devices. It is vital that EVERYBODY who roots their Samsung Device knows how to use ODIN because it is often the only way to flash certain ROMs/Firmware or completely revert back to stock firmware. Also, when all else fails, it is the only way to restore a device to working condition after a partial brick or boot loop.
Setting Up ODIN
1. First you need to download the Samsung USB drivers for Windows and ins
2. THEN connect your phone to the USB. (some folks have had luck doing it in reverse..connecting the USB then Power and vol down)
tall them. They can be found here: http://forum.xda-developers.com/showthread.php?t=728929 ;
3. Once it has finished, download this file: http://www.justanotherdev.slackdev.com/Odin3.rar
4. Unpack it using winrar, and place it in its own dedicated folder.
5. You now have Odin set up and you can use it whenever you need to flash your Galaxy S, providing you have some images to flash.
Preparing the Files to Flash
1. Download this file: www.justanotherdev.slackdev.com/s1_odin_20100512.rar and extract it. This is your .pit file.
2. place the file you downloaded into an easily recognizable folder(in case you need the same file a month from now)
3. Download this file now: http://www.justanotherdev.slackdev.com/T959UVJFD.tar . This is your .tar file.
4. Do not extract the file you downloaded in step 3, but move it to the same folder as the .pit file.
Booting into Download Mode and Flashing the Files
1. Open ODIN and in the PIT section, select the .pit file you downloaded.
2. In the PDA section, select the .tar file your downloaded.
3. Turn your phone off, then plug it into your computer using a USB cable.
4. Wait for the battery charging icon to appear, then press and hold the volume up, volume down, and power buttons.
5. When the screen turns black, let go of the power button, but continue to hold both volume keys.
6. You will eventually see an picture with black Android robot digging within a yellow triangle.
7. If you see something else after your phone has booted, try steps 4-6 again.
8. On your computer, if one of the COM port icons in ODIN has turned yellow, then your phone has been recognized. If not, try again from step 3.
9. If you still do not get any results, try another USB port on your computer. The ones in the back always seem to work well.
10. Press the start button and wait. If you do not see a blue progress bar on your phone after 5 minute, take out your phones battery, unplug your phone and start from step 1 again.
Hi,
Thank you for trying to help, but I need a little more clarification on the rest of the steps... can someone please help?
In step 2 of joshkoss' instructions, he tells us to.....
Plug your phone into your computer after your phone has rebooted 2 times...
Click to expand...
Click to collapse
At what point did I ever UNPLUG it to begin with? The guide you pasted never tells me to unplug the phone while flashing the files on the phone!!
The second part of joshkoss instructions tells me to...
...and then backup and format the SD card.
Click to expand...
Click to collapse
What am I "backing up?" on the SD card??? Isn't it a blank SD card???
And what is the correct "format"???
What utility do I use to format the SD card???
PLEASE SOMEONE HELP!!!!!!
i have been following steps in this thread http://forum.xda-developers.com/showpost.php?p=33305784&postcount=2&nocache=1&z=5264202383282762
phone is constantly in download mode, and odin program looks like this https://www.dropbox.com/s/3mlc1ogy3ltxwgi/Screenshot 2014-07-18 15.08.09.png
i left it alone for over half an hour and tried multiple times putting auto reboot on and off. Any advice?
i also tried a different port, using the original cable, developer mode, reinstalled drivers, and tried an older version of odin... nothing seems to work
even Kies can't connect to my phone
Try This
darkmayhem said:
i also tried a different port, using the original cable, developer mode, reinstalled drivers, and tried an older version of odin... nothing seems to work
even Kies can't connect to my phone
Click to expand...
Click to collapse
Try This....http://forum.xda-developers.com/galaxy-s3/help/root-s3-whitout-count-binary-t2820855
darkmayhem said:
i have been following steps in this thread http://forum.xda-developers.com/showpost.php?p=33305784&postcount=2&nocache=1&z=5264202383282762
phone is constantly in download mode, and odin program looks like this https://www.dropbox.com/s/3mlc1ogy3ltxwgi/Screenshot 2014-07-18 15.08.09.png
i left it alone for over half an hour and tried multiple times putting auto reboot on and off. Any advice?
Click to expand...
Click to collapse
hey mate. Use chairfire autoroot to root your s3.
I used it too to root my phone. It is best way.
Just goto chaifire website (google it) -> download the autoroot for your variant -> download Odin (I think it come inside autoroot zip) -> extract the zip -> you will find a .tar file -> put your phone in download mode by pressing vol down + home button + power and press volume up key -> connect your phone in your computer and let it install necessary driver. if the drivers were installed properly you will see COM id in odin. Only proceed if you see COM id. -> click on PDA and select the .tar that we extracted before -> just don't touch anything inside odin and click on start. Wait until odin say finished but dont disconnect the phone.
after the odin process there will be some process done in your phone so wait until your phone completely reboots and you see the SU app in your app drawer.
Now disconnect your phone.
Your phone will be rooted mate.
If you wanna experience s5 in your s3 then download the S5 sensation custom rom from the very great dev @sunajkram23. He has developed s5 rom with all its features and funtion for s3.
Before you flash any custom rom, you have a flash a custom recovery. I am using latest touch CWM recovery ( google it ) and download .tar file and then flash through odin ( same procedure to flash as I stated above ).
---------- Post added at 04:36 PM ---------- Previous post was at 04:36 PM ----------
hey mate. Use chairfire autoroot to root your s3.
I used it too to root my phone. It is best way.
Just goto chaifire website (google it) -> download the autoroot for your variant -> download Odin (I think it come inside autoroot zip) -> extract the zip -> you will find a .tar file -> put your phone in download mode by pressing vol down + home button + power and press volume up key -> connect your phone in your computer and let it install necessary driver. if the drivers were installed properly you will see COM id in odin. Only proceed if you see COM id. -> click on PDA and select the .tar that we extracted before -> just don't touch anything inside odin and click on start. Wait until odin say finished but dont disconnect the phone.
after the odin process there will be some process done in your phone so wait until your phone completely reboots and you see the SU app in your app drawer.
Now disconnect your phone.
Your phone will be rooted mate.
If you wanna experience s5 in your s3 then download the S5 sensation custom rom from the very great dev @sunajkram23. He has developed s5 rom with all its features and funtion for s3.
Before you flash any custom rom, you have a flash a custom recovery. I am using latest touch CWM recovery ( google it ) and download .tar file and then flash through odin ( same procedure to flash as I stated above ).
Hi all. I will try to write an tutorial for all who want to root your new update firmware.
First lets consider that you have updated your firmware and booted at least one time.
Now what we need is: one PC,cable to conect your phone to PC, and 2 tools: TWRP 2.7.1.1 for KK and Superuser or SuperSU at least 2.16, no less.
Lets begin.
1. Connect your phone to your PC and install phone drivers correctly.
2. Copy superuser.zip or SuperSU on your SDCARD. Remember: only one is good. DO NOT FLASH BOTH. Flash the one you like.
3. Disconnect your phone from PC.
4. Extract files from TWRP 2.7.1.1 or the newest one TWRP 2.8.4.0 rev 2 archive on some folder on your PC.(Remember the folder )
5. In your folder that you extracted your archive you should find recovery.img and one scatter file.
6. Now you must have this FlashTool - SP_Flash_Tool_v3.1304.0.119 or SP_Flash_Tool_v5.1352.01. Not Optional.
7. Power Off your phone.
8. After power off your phone open FlahTool and browse for the scatter file your folder where are the recovery.img and scatter file.
9. Now comes the tricky part .
10. Load the scatter file and mark DA DL with check sum in SP Flash Tool v3. In SP Flash Tool v 5 dont need. They are allready selected. Recovery.img should appear checked.
10.1. I have updated the post with some custom scatter files for 4GB and 8GB Firmware. Iff you get diferent errors when you flash the recovery file use this custom scatter files.
11. Press Download NOT FIRMWARE UPGRADE.
12. Now, just now plug the cabble on your phone. Download should start and a green circle should appear.
13. After this you should have custom recovery TWRP installed.
14. Then boot directly to recovery your phone by pressing power with vol + and vol - butons together. Not Optional!
15. From TWRP flash Superuser.zip or SuperSU 2.xx. SuperSU is fixed. Works fine now.
16. Voila you have your KitKat rooted.
17. Now go to Magazin Play and download an RootChecker app and verify.
Hope this helped. For me worked with no mistake.
Waiting for feedback.
Update:
I have uploaded TWRP Corrected by Javum. Thanks Javum. And it is working on ROW 226 and 227 tested personaly by installing patches, superuser and making backups.
Sent from my Lenovo P780
SP Flash Tool_v.3 and v.5
stympy said:
Hi all. I will try to write an tutorial for all who want to root your new update firmware.
First lets consider that you have updated your firmware and booted at least one time.
Now what we need is: one PC,cable to conect your phone to PC, and 2 tools: TWRP 2.7.1.1 for KK and Superuser.
Lets begin.
1. Connect your phone to your PC and install phone drivers correctly.
2. Copy superuser.zip on your SDCARD.
3. Disconnect your phone from PC.
4. Extract files from TWRP 2.7.1.1 archive on some folder on your PC.(Remember the folder )
5. In your folder that you extracted your archive you should find recovery.img and one scatter file.
6. Now you must have the latest FlashTool.
7. Power Off your phone.
8. After power off your phone open FlahTool and browse for the scatter file your folder where are the recovery.img and scatter file.
9. Now comes the tricky part .
10. Load the scatter file and mark DA DL with check sum. Recovery.img should appear checked.
11. Press Download NOT FIRMWARE UPGRADE.
12. Now, just now plug the cabble on your phone. Download should start and a green circle should appear.
13. After this you should have custom recovery TWRP installed.
14. Reboot at least once. Then reboot to recovery by powering off your phone and restart with vol + - and power butons pressed.
15. From TWRP flash Superuser.zip.
16. Voila you have your KitKat rooted.
17. Now go to Magazin Play and download an RootChecker app and verify.
Hope this helped. For me worked with no mistake.
Waiting for feedback.
Sent from my Lenovo P780 using LiFe v.07 and TWRP 2.6.3.0.
Click to expand...
Click to collapse
This method did not work i got this error
"pmt changed for the rom it must be downloaded"
astrokid1993 said:
This method did not work i got this error
"pmt changed for the rom it must be downloaded"
Click to expand...
Click to collapse
Try to use Firmware Upgrade buton.
Or: You need to edit the file MT6589_Android_scatter_emmc.txt section USRDATA 0x48d80000 on USRDATA 0x58980000.
Waiting for feedback.
Sent from my Lenovo P780 using LiFe v.07 and TWRP 2.6.3.0.
1. Connect your phone to your PC and install phone drivers correctly.
2. Copy superuser.zip on your SDCARD.
3. Disconnect your phone from PC.
4. Extract files from TWRP 2.7.1.1 archive on some folder on your PC.(Remember the folder )
5. In your folder that you extracted your archive you should find recovery.img and one scatter file.
6. Now you must have this FlashTool - SP_Flash_Tool_v3.1304.0.119. Not Optional.
7. Power Off your phone.
8. After power off your phone open FlahTool and browse for the scatter file your folder where are the recovery.img and scatter file.
9. Now comes the tricky part .
10. Load the scatter file and mark DA DL with check sum. Recovery.img should appear checked.
11. Press Download NOT FIRMWARE UPGRADE.
12. Now, just now plug the cabble on your phone. Download should start and a green circle should appear.
13. After this you should have custom recovery TWRP installed.
14. Reboot at least once. Then reboot to recovery by powering off your phone and restart with vol + - and power butons pressed.
15. From TWRP flash Superuser.zip.
16. Voila you have your KitKat rooted.
17. Now go to Magazin Play and download an RootChecker app and verify.
Point no 12 doesn't work with me, Anything I should know?
asambe2dumb said:
1. Connect your phone to your PC and install phone drivers correctly.
2. Copy superuser.zip on your SDCARD.
3. Disconnect your phone from PC.
4. Extract files from TWRP 2.7.1.1 archive on some folder on your PC.(Remember the folder )
5. In your folder that you extracted your archive you should find recovery.img and one scatter file.
6. Now you must have this FlashTool - SP_Flash_Tool_v3.1304.0.119. Not Optional.
7. Power Off your phone.
8. After power off your phone open FlahTool and browse for the scatter file your folder where are the recovery.img and scatter file.
9. Now comes the tricky part .
10. Load the scatter file and mark DA DL with check sum. Recovery.img should appear checked.
11. Press Download NOT FIRMWARE UPGRADE.
12. Now, just now plug the cabble on your phone. Download should start and a green circle should appear.
13. After this you should have custom recovery TWRP installed.
14. Reboot at least once. Then reboot to recovery by powering off your phone and restart with vol + - and power butons pressed.
15. From TWRP flash Superuser.zip.
16. Voila you have your KitKat rooted.
17. Now go to Magazin Play and download an RootChecker app and verify.
Point no 12 doesn't work with me, Anything I should know?
Click to expand...
Click to collapse
If the 12 point doesn't work it means that you don't have the driver installed or installed correctly. Check the drivers.
Sent from my Lenovo P780 using XDA Free mobile app
all steps are done but not succsses
Hallo... IN my lenovo p780 with officaly updated android 4.4.2 and not rooted phone .I fallow all steps carrectly as u discribed after press download button when I connect my switched off phone I got mtp error than I edit scatter file user data as describe in comment section after that I press download and connect my p780 switched of all process done smuthaly I got green circles that's mean I am done after that I switched on phone and switched off phone for boot in recovery I press vol+ vol- and power buttons but their is not twrp recovery option ..only stock recovery option .
Pls help bro ...what I am doing wrong?. Or any other way to do this ?
Thanks for this wonderful tutorial.
Hi all. I will try to write an tutorial for all who want to root your new update firmware.
First lets consider that you have updated your firmware and booted at least one time.
Now what we need is: one PC,cable to conect your phone to PC, and 2 tools: TWRP 2.7.1.1 for KK and Superuser.
Lets begin.
1. Connect your phone to your PC and install phone drivers correctly.
2. Copy superuser.zip on your SDCARD.
3. Disconnect your phone from PC.
4. Extract files from TWRP 2.7.1.1 archive on some folder on your PC.(Remember the folder  )
5. In your folder that you extracted your archive you should find recovery.img and one scatter file.
6. Now you must have this FlashTool - SP_Flash_Tool_v3.1304.0.119. Not Optional.
7. Power Off your phone.
8. After power off your phone open FlahTool and browse for the scatter file your folder where are the recovery.img and scatter file.
9. Now comes the tricky part .
10. Load the scatter file and mark DA DL with check sum. Recovery.img should appear checked.
11. Press Download NOT FIRMWARE UPGRADE.
12. Now, just now plug the cabble on your phone. Download should start and a green circle should appear.
13. After this you should have custom recovery TWRP installed.
14. Reboot at least once. Then reboot to recovery by powering off your phone and restart with vol + - and power butons pressed.
15. From TWRP flash Superuser.zip.
16. Voila you have your KitKat rooted.
17. Now go to Magazin Play and download an RootChecker app and verify.
Hope this helped. For me worked with no mistake.
Waiting for feedback. 
Update:
I have uploadet TWRP Corrected by Javum. Thanks Javum. And it is working on ROW 221 tested personaly by installing patches, superuser and making backups.
Sent from my Lenovo P780 using LiFe v.07 and TWRP 2.6.3.0.
Sent from my Lenovo P780 using XDA Free mobile app
I have not rooted lenovo p780 official updated to android 4.4.2 s221 OK I want root my phone I try every thing like pharma root. One click root ;rescue root;vroot ;kingoroot;and many other which I don't remember but not success ..OK than I try to follow your method ...first when I connect my switched off phone downloading process start after red bar complete I got mtp error
Then I edit scatter file user data section as u mansion in comments sections after that download has done withouts error I got green circle that's mean I am done ... OK I disconnect phone from computer and power on than switched off for boot in recovery ... I press power button + vol up and down together but their is ...
NOT TWRP RECOVERY .. only stock android recovery huuh what I do now ..where I am wrong any suggestion plz help
And thanks for this wonder full tutorial.
pu04 said:
Hi all. I will try to write an tutorial for all who want to root your new update firmware.
First lets consider that you have updated your firmware and booted at least one time.
Now what we need is: one PC,cable to conect your phone to PC, and 2 tools: TWRP 2.7.1.1 for KK and Superuser.
Lets begin.
1. Connect your phone to your PC and install phone drivers correctly.
2. Copy superuser.zip on your SDCARD.
3. Disconnect your phone from PC.
4. Extract files from TWRP 2.7.1.1 archive on some folder on your PC.(Remember the folder  )
5. In your folder that you extracted your archive you should find recovery.img and one scatter file.
6. Now you must have this FlashTool - SP_Flash_Tool_v3.1304.0.119. Not Optional.
7. Power Off your phone.
8. After power off your phone open FlahTool and browse for the scatter file your folder where are the recovery.img and scatter file.
9. Now comes the tricky part .
10. Load the scatter file and mark DA DL with check sum. Recovery.img should appear checked.
11. Press Download NOT FIRMWARE UPGRADE.
12. Now, just now plug the cabble on your phone. Download should start and a green circle should appear.
13. After this you should have custom recovery TWRP installed.
14. Reboot at least once. Then reboot to recovery by powering off your phone and restart with vol + - and power butons pressed.
15. From TWRP flash Superuser.zip.
16. Voila you have your KitKat rooted.
17. Now go to Magazin Play and download an RootChecker app and verify.
Hope this helped. For me worked with no mistake.
Waiting for feedback. 
Update:
I have uploadet TWRP Corrected by Javum. Thanks Javum. And it is working on ROW 221 tested personaly by installing patches, superuser and making backups.
Sent from my Lenovo P780 using LiFe v.07 and TWRP 2.6.3.0.
Sent from my Lenovo P780 using XDA Free mobile app
I have not rooted lenovo p780 official updated to android 4.4.2 s221 OK I want root my phone I try every thing like pharma root. One click root ;rescue root;vroot ;kingoroot;and many other which I don't remember but not success ..OK than I try to follow your method ...first when I connect my switched off phone downloading process start after red bar complete I got mtp error
Then I edit scatter file user data section as u mansion in comments sections after that download has done withouts error I got green circle that's mean I am done ... OK I disconnect phone from computer and power on than switched off for boot in recovery ... I press power button + vol up and down together but their is ...
NOT TWRP RECOVERY .. only stock android recovery huuh what I do now ..where I am wrong any suggestion plz help
And thanks for this wonder full tutorial.
Click to expand...
Click to collapse
By any chance is your phone made in 2014 ?
Then if it is use preloader. Check preloader and try this one.
Its one year old phone ..with jelly bin 4.2.2 now I updated to 4.4.4 originally by ota ..I want to root it actually in mtk toot its show this massage `` ATTENTION! File /system/recovery-from-boot.p which restore factory recovery in case of phone switching on in a normal mode Is Found!
I don't know but I think its affect ..can u pls explain it what's this mean.
Thanks for reply ...I try with bootloder next day
Sent from my Lenovo P780 using XDA Free mobile app
Will it work on S214 also or should i instal S221 for my phone
astrokid1993 said:
Will it work on S214 also or should i instal S221 for my phone
Click to expand...
Click to collapse
For me worked on both.
Sent from my Lenovo P780
Thanksgiving
OK....FIRST I HEARTILY THANKS TO U ..NOW I AM SUCCESS ..finally rooted my lenovo p780 4.4.2 KitKat updated phone ..without any error or bricking my phone .. Thanks for this wonder full tutorial ..
As I mentioned previous reply that I got error from Sp flash tool ..something pmt error ..than as u sugest i edit user data section in scatter data section and flash it ..but nothing happen their is only stock recovery .. Today i retry process ..
1- follow all steps as it is
2 - for pmt error change user data section 3- at last u advise that power on phone then reboot in recovery by pressing volume+'- +power button at this stage ..what I have done ..is
I don't on my phone ..after flashing recovery I direct go to recovery using power + volume up+ volume down ..and waaaala here is done I got twrp custom recovery .. But don't flase superuser .zip just shutdown phone and on go to normal mode and check every thing is fine ..now power off go to recovery ...there is twrp present ..in recovery install super user ..just unchake verify check mark its install without any error ..and ..GOT ROOTED ..
Conclusion - why I unsuccessful in first time I don't know but think..I have this type of file .. File /system/recovery-from-boot.p which restore factory recovery in case of phone switching on in a normal mode Is Found! I think its prevent twrp when I normally switch on phone ..so this time I don't on phone go to direct recovery and all is done .. I got custom recovery..
AT last I thank you again for this great tut. Its worked for me finally .
Sent from my Lenovo P780 using XDA Free mobile app
stympy said:
Hi all. I will try to write an tutorial for all who want to root your new update firmware.
First lets consider that you have updated your firmware and booted at least one time.
Now what we need is: one PC,cable to conect your phone to PC, and 2 tools: TWRP 2.7.1.1 for KK and Superuser.
Lets begin.
1. Connect your phone to your PC and install phone drivers correctly.
2. Copy superuser.zip on your SDCARD.
3. Disconnect your phone from PC.
4. Extract files from TWRP 2.7.1.1 archive on some folder on your PC.(Remember the folder )
5. In your folder that you extracted your archive you should find recovery.img and one scatter file.
6. Now you must have this FlashTool - SP_Flash_Tool_v3.1304.0.119. Not Optional.
7. Power Off your phone.
8. After power off your phone open FlahTool and browse for the scatter file your folder where are the recovery.img and scatter file.
9. Now comes the tricky part .
10. Load the scatter file and mark DA DL with check sum. Recovery.img should appear checked.
11. Press Download NOT FIRMWARE UPGRADE.
12. Now, just now plug the cabble on your phone. Download should start and a green circle should appear.
13. After this you should have custom recovery TWRP installed.
14. Reboot at least once. Then reboot to recovery by powering off your phone and restart with vol + - and power butons pressed.
15. From TWRP flash Superuser.zip.
16. Voila you have your KitKat rooted.
17. Now go to Magazin Play and download an RootChecker app and verify.
Hope this helped. For me worked with no mistake.
Waiting for feedback.
Update:
I have uploadet TWRP Corrected by Javum. Thanks Javum. And it is working on ROW 221 tested personaly by installing patches, superuser and making backups.
Sent from my Lenovo P780 using LiFe v.07 and TWRP 2.6.3.0.
Click to expand...
Click to collapse
Friend, first time I follow all your steps to install TWRP , but it failed . And I see your reply in this thread and change the USR DATA . But it failed again , MY PHONE WAS BRICKED !!!!! IT DONT DO ANY RESPONSE , CANT POWER ON , CANT CONNECT TO COMPUTER , CANT GO TO RECOVERY . IT ONLY SHOW A RED LIGHT WHEN CHARGING . HOW TO SOLVE THIS PROBLEM ??? PLEASE HELP ME ...
stympy said:
Hi all. I will try to write an tutorial for all who want to root your new update firmware.
First lets consider that you have updated your firmware and booted at least one time.
Now what we need is: one PC,cable to conect your phone to PC, and 2 tools: TWRP 2.7.1.1 for KK and Superuser.
Lets begin.
1. Connect your phone to your PC and install phone drivers correctly.
2. Copy superuser.zip on your SDCARD.
3. Disconnect your phone from PC.
4. Extract files from TWRP 2.7.1.1 archive on some folder on your PC.(Remember the folder )
5. In your folder that you extracted your archive you should find recovery.img and one scatter file.
6. Now you must have this FlashTool - SP_Flash_Tool_v3.1304.0.119. Not Optional.
7. Power Off your phone.
8. After power off your phone open FlahTool and browse for the scatter file your folder where are the recovery.img and scatter file.
9. Now comes the tricky part .
10. Load the scatter file and mark DA DL with check sum. Recovery.img should appear checked.
11. Press Download NOT FIRMWARE UPGRADE.
12. Now, just now plug the cabble on your phone. Download should start and a green circle should appear.
13. After this you should have custom recovery TWRP installed.
14. Reboot at least once. Then reboot to recovery by powering off your phone and restart with vol + - and power butons pressed.
15. From TWRP flash Superuser.zip.
16. Voila you have your KitKat rooted.
17. Now go to Magazin Play and download an RootChecker app and verify.
Hope this helped. For me worked with no mistake.
Waiting for feedback.
Update:
I have uploadet TWRP Corrected by Javum. Thanks Javum. And it is working on ROW 221 tested personaly by installing patches, superuser and making backups.
Sent from my Lenovo P780 using LiFe v.07 and TWRP 2.6.3.0.
Click to expand...
Click to collapse
Not working at all for me i did everything correctly till point 11 when i connect my phone as in point 12 my phone starts charging and nothing is getting detected in the sp flash tool.
Any one please help me with my problem
tngultimate said:
Friend, first time I follow all your steps to install TWRP , but it failed . And I see your reply in this thread and change the USR DATA . But it failed again , MY PHONE WAS BRICKED !!!!! IT DONT DO ANY RESPONSE , CANT POWER ON , CANT CONNECT TO COMPUTER , CANT GO TO RECOVERY . IT ONLY SHOW A RED LIGHT WHEN CHARGING . HOW TO SOLVE THIS PROBLEM ??? PLEASE HELP ME ...
Click to expand...
Click to collapse
Your phone seems to be produced in 2014. For this phones must do this:
1. Must flash with another preloader.
Look for this ROM : P780_S136_140306_Lang.7z
Flash this Rom then OTA update.
Then tell me if it works.
Sent from my Lenovo P780
astrokid1993 said:
Not working at all for me i did everything correctly till point 11 when i connect my phone as in point 12 my phone starts charging and nothing is getting detected in the sp flash tool.
Any one please help me with my problem
Click to expand...
Click to collapse
Did you installed the drivers?
Did you presed the firmware upgrade first and then plugged the phone?
Update
Try this:
Press Download and open the case of your phone and press the little red buton for 2 seconds.
Sent from my Lenovo P780
stympy said:
Did you installed the drivers?
Did you presed the firmware upgrade first and them plugged the phone?
Sent from my Lenovo P780
Click to expand...
Click to collapse
I installed driver already... My phone now cant do anything... Help me please ...
tngultimate said:
I installed driver already... My phone now cant do anything... Help me please ...
Click to expand...
Click to collapse
Hi.
Do not panic. Your phone is just soft bricked.
Here is the link to download what you must flash first:
https://drive.google.com/folderview?id=0B2ORIgaV4iacT01mTm5JVzFuRGs&usp=sharing
And now here's a little tutorial how to save your phone. You should respectit exactly.
Step by step you will do this:
>>>>> USE WINDOWS 7 FOR THIS TUTORIAL <<<<<<<<<<<
>>>>>>>>>>REMOVE THE USB CALBLE FROM PHONE! <<<<<<<<<<<<<
NOW:
-Lets consider that you have downloadet the firmware
1. Unpack ROM, and Click on Flash_tool.exe
2. Select a the MT6589_Android_scatter_emmc.txt in ROM from target_bin folder
3. Wait file to be added into Flash Tool
4. Choose Options->USB Model,click USB Model SKIP THIS STEP IFF SELECTED
5. Choose Option->DA DownLoad All->Speed->High Speed, click High Speed
6. Check box with DA DL All With Check Sum
7. Turn off your phone - skip this step is allready powered off
8. "Press Firmware->Upgrade "
9. And ONLY NOW connect your phone into the computer via USB data cable.
10. The process will start and a red progress bar will appear after color purple, yellow.
OR
11. If the step 9 dont work open the case of your phone and you will find a red small buton and press it 2 seconds.
12. The process will start and a red progress bar will appear after color purple, yellow.
13. And green circles display
- Finish !
- You can now safely disconnect your phone and turn it on!
After this tell me iff something goes wrong !
stympy said:
Hi.
Do not panic. Your phone is just soft bricked.
Here is the link to download what you must flash first:
https://drive.google.com/folderview?id=0B2ORIgaV4iacT01mTm5JVzFuRGs&usp=sharing
And now here's a little tutorial how to save your phone. You should respectit exactly.
Step by step you will do this:
>>>>> USE WINDOWS 7 FOR THIS TUTORIAL <<<<<<<<<<<
>>>>>>>>>>REMOVE THE USB CALBLE FROM PHONE! <<<<<<<<<<<<<
NOW:
-Lets consider that you have downloadet the firmware
1. Unpack ROM, and Click on Flash_tool.exe
2. Select a the MT6589_Android_scatter_emmc.txt in ROM from target_bin folder
3. Wait file to be added into Flash Tool
4. Choose Options->USB Model,click USB Model SKIP THIS STEP IFF SELECTED
5. Choose Option->DA DownLoad All->Speed->High Speed, click High Speed
6. Check box with DA DL All With Check Sum
7. Turn off your phone - skip this step is allready powered off
8. "Press Firmware->Upgrade "
9. And ONLY NOW connect your phone into the computer via USB data cable.
10. The process will start and a red progress bar will appear after color purple, yellow.
OR
11. If the step 9 dont work open the case of your phone and you will find a red small buton and press it 2 seconds.
12. The process will start and a red progress bar will appear after color purple, yellow.
13. And green circles display
- Finish !
- You can now safely disconnect your phone and turn it on!
After this tell me iff something goes wrong !
Click to expand...
Click to collapse
Thanks for replying But my phone cant connect to computer... My computer keep saying my phone is malfunction...
tngultimate said:
Thanks for replying But my phone cant connect to computer... My computer keep saying my phone is malfunction...
Click to expand...
Click to collapse
Can you tel me what your computer says more exacly ?
How to root Samsung Galaxy Trend 2 lite - SM-G318H?
crystysor1 said:
How to root Samsung Galaxy Trend 2 lite - SM-G318H?
Click to expand...
Click to collapse
Samsung USB Drivers
Odin3 v3.07
KU1.9_SM-G318H_4.4.4.tar (recovery+cache)
Root include standalone KingoUser 1.9 apk.
Work on Android 4.4.4
Build: G318HXCU0AOE5
Kernel: 3.10.17-589709
Serial: KTU84P.G318HXCU0AOE8
hello,
can you post the steps in order to root the SM-G318H ?
thanks !
Hi, Where is the file?
I don't found...
Well so let's go for a step by step.
WARNING: Warranty will be definitly remove after rooting your phone !
You need an USB data cable, generally provided with phone pack.
1 - Download Samsung USB Drivers and install it.
It can be found on official Samsung Developers website [Not enough right to post links].
2 - Download Odin3 v3.07, can be found everywhere !
3 - Download KU1.9_SM-G318H_4.4.4.tar [Not enough right to post links].
4 - Connect the phone and power it up in Odin mode by pressing Volume down + home + Power.
5 - Start Odin3 exe and load the tar file into PDA, only Auto Reboot will be checked in Option section.
6 - When Odin has find the ID:COM press Start.
Phone automatically reboot in KingoRoot recovery mode to install root service and KingoUser 1.9 apk, it's take about 30 sec and then auto reboot in normal way.
Done with no datas loss (backup them before in case of), you can upgrade KingoUser 1.9 to the latest 2.0.2.
Be aware that the phone still has Kingo recovery image and you can't have a recovery mode [Volume up + home + power] for update.zip, clear/wipe data, etc...
To grant this, put back original recovery PDA file image with Odin (step 4 to 6).
It can be extract from official firmware (recovery.img) and repack into tar/tar.md5 file for PDA.
Feedbacks and thanks are welcome.
How to root Samsung Galaxy Trend 2 lite - SM-G318H?
crystysor1 said:
How to root Samsung Galaxy Trend 2 lite - SM-G318H?
Click to expand...
Click to collapse
hi i would like very much you could give me the KU1.9_SM-G318H_4.4.4.tar
because i seem unable to find it... =(
plz help the world!!!!! =)
thank you very much Mr. Madgik nop90
:good:
AutoROOT Galaxy Trend 2 Lite SM-G318H
After work self made can be found here
AutoROOT: KU1.9_SM-G318H_4.4.4.tar
MD5: 360F5D6703412A5E9D8F77CC4EA6AD35
Size: 22.5 Mo - 23 633 920 octets
ge.tt/89u6oOO2
See you soon . . .
thank's
crystysor1 said:
How to root Samsung Galaxy Trend 2 lite - SM-G318H?
Click to expand...
Click to collapse
I rooted my Trend 2 lite SM-G318H with Kingo root for Windows.
It took a long time, but succeeded fine.
Cheers.
Madgik nop90 said:
After work self made can be found here
AutoROOT: KU1.9_SM-G318H_4.4.4.tar
MD5: 360F5D6703412A5E9D8F77CC4EA6AD35
Size: 22.5 Mo - 23 633 920 octets
ge.tt/89u6oOO2
See you soon . . .
Click to expand...
Click to collapse
hi, do you think it will work for my Galaxy Ace 4 Neo G318H?
someone managed to do the root ? Samsung G318H trend lite 2?
the metode was described in post nr5 working on my sm g318h phone thank you
KU1.9_SM-G318H_4.4.4.tar
can someone send me this file ????? please so much
Don't really see the point as there are no roms out for this phone to install or am I missing something, can certain roms cooked for other Galaxy devices be installed?
I have a question
Madgik nop90 said:
Well so let's go for a step by step.
WARNING: Warranty will be definitly remove after rooting your phone !
You need an USB data cable, generally provided with phone pack.
1 - Download Samsung USB Drivers and install it.
It can be found on official Samsung Developers website [Not enough right to post links].
2 - Download Odin3 v3.07, can be found everywhere !
3 - Download KU1.9_SM-G318H_4.4.4.tar [Not enough right to post links].
4 - Connect the phone and power it up in Odin mode by pressing Volume down + home + Power.
5 - Start Odin3 exe and load the tar file into PDA, only Auto Reboot will be checked in Option section.
6 - When Odin has find the ID:COM press Start.
Phone automatically reboot in KingoRoot recovery mode to install root service and KingoUser 1.9 apk, it's take about 30 sec and then auto reboot in normal way.
Done with no datas loss (backup them before in case of), you can upgrade KingoUser 1.9 to the latest 2.0.2.
Be aware that the phone still has Kingo recovery image and you can't have a recovery mode [Volume up + home + power] for update.zip, clear/wipe data, etc...
To grant this, put back original recovery PDA file image with Odin (step 4 to 6).
It can be extract from official firmware (recovery.img) and repack into tar/tar.md5 file for PDA.
Feedbacks and thanks are welcome.
Click to expand...
Click to collapse
You said: "Be aware that the phone still has Kingo recovery image and you can't have a recovery mode [Volume up + home + power] for update.zip, clear/wipe data, etc...
To grant this, put back original recovery PDA file image with Odin (step 4 to 6).
It can be extract from official firmware (recovery.img) and repack into tar/tar.md5 file for PDA."
After doing the root, can I update my phone??????
If the answer of this question is no, can you post a link to another file that doesn't do that?
Can any one please help me root my samsung galaxy trend neo SM-G318H
BASEBAND VERSION SM-G318HXCU0AOG2
Root Samsung Galaxy Trend 2 lite - SM-G318H android version 4.4.4
ROOT for all Samsung SM-G318H android version 4.4.4 Phones.
WARNING: Warranty will definitely be void after rooting your phone !
You need an USB data cable, generally provided with phone pack.
Requirements before rooting process.
A - Enable usb debugging mode on your phone.
B - Check if trust from Unknown Sources is enabled on your phone.
C - Download Samsung USB Driver for Mobile Phones and install it.
D -When connecting your phone your PC must give some notification that you connected your phone.
Rooting
1 - Download Odin3 v3.10.6 latest version.
2 - Locate and Download SM-G318H_4.4.4cokbasit.org.tar (i can't submit a direct download link as Junior Member)
3 - Start (Run as Administrator) Odin3 v3.10.6.exe and click on the --> CP <-- button to select and load the downloaded tar file into Odin. Make No Mistake you must see the path of the downloaded tar file after the checked CP checkbox.
(Using an older version of Odin click on the --> PHONE <--button to select and load the downloaded tar file into Odin. Make a No Mistake you must see the path of the downloaded tar file after the checked PHONE checkbox)
4 -Boot your disconnected SM-G318H phone into Download Mode by pressing Volume down + home + Power together (long press until the boot screen appear). A warning message will flash, now press Volume Up key to proceed to Download Mode. Now connect your SM-G318H phone, in Odin you should see a highlighted COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. That means Odin has successfully detected your SM-G318H phone at a ID:COM Port if not the Case keep on trying, Or find a better tutorial about Odin flashing. Now quick proceed to installation Press Start.
5 - Once completed, you would see “PASS!” message in ID:COM.
6 - Your SM-G318H Phone should automatically reboot after completion And You have ROOT
Including SuperUser ase Root Access Manager for your SM-G318H phone.
download==> 4.4.4cokbasit.org.tar
mediafire.com/download/moj58dj0rkw0jif/SM-G318H_4.4.4cokbasit.org.tar
Tweak your Rooted SM-G318H to absolute top performance. I recommend the Ultimate Utility PowerToolbox a MustHave for android PowerUsers the All-In-One Toolbox containing a lot Powerful system utilities (google playstore). Warning don't apply risky changes that can seriously mash up (brick) your phone or resulting in a unstable frequently crashing system. Some changes can't be rolled back. So only apply risky changes with outstanding knowledge of the android system. Otherwise you have flash the (original) Stock firmware including the root tar for SM-G318H again and reinstall all your apps.
All-In-One Toolbox APK==> imoblife.toolbox.full-5.2.9.1.apk
Feedbacks and thanks are welcome
Mine is not either of those. It's Galaxy Trend Neo! Will this steps work? How do i go about rooting it if the steps provided wont help? ?
skullhack said:
Mine is not either of those. It's Galaxy Trend Neo! Will this steps work? How do i go about rooting it if the steps provided wont help?
Click to expand...
Click to collapse
Yes ROOT for every SM-G318H device! Unfortunately i still can't submit a direct download link for the SM-G318H_4.4.4cokbasit.org.tar File Essential for ROOT on SM-G318H devices. Follow the steps and you will have ROOT on your SM-G318H phone.
mediafire.com/download/moj58dj0rkw0jif/SM-G318H_4.4.4cokbasit.org.tar
Download from there.
Feedbacks and thanks are Welcome
Let me get the package. Will get back to you.
FLASHING STOCK JELLYBEANHey guys, i have seen that a lot of people want to downgrade to jellybean 4.3 and facing a "fail" in Odin. so i'm creating this thread to overcome that problem.
Most importantly, clear the data of your phone before you flash the stock JellyBean. Otherwise you will face a bootloop.
Step-1: Download the following required files.
(All links are from my AndroidFileHost account so you dont have to login for any kind of websites)
Samsung USB drivers(for G7102 only): https://www.androidfilehost.com/?fid=24459283995316252
Odin: https://www.androidfilehost.com/?fid=24459283995316253
JellyBean firmware: https://www.androidfilehost.com/?fid=24459283995316591
Step-2: The actual flashing.
>Extract SAMSUNG_USB_DRIVERS_FOR_MOBILE_PHONES.ZIP AND INSTALL THE DRIVERS.
>Extract the Firmware file.
>Extract Odin ZIP file.
>Open Odin v3.10.7 folder and run Odin3 v3.10.7.exe.
>Reboot Phone in Download Mode by pressing and hold Home + Power + Volume Down buttons.
>Connect phone and wait until you get a blue sign in Odin.
Note: If you didnt get the blue sign, you did not install samsung drivers properly.
>Add the firmware file to AP / PDA.
>Make sure re-partition is NOT ticked.
>Go to options tab and select nand erase all (this is very important).
>Click the start button, sit back and wait few minutes.
Voila. You successfully flashed stock JellyBean on your samsung galaxy grand 2 (SM-G7102)
This worked on my device. and my friend's devices. i have tried in 2-3 devices. If u still fail to flash and brick your device im not responsible.
Firmware link updated.. if any1 tries, do respond here...
downgrading stable http://4pda.ru/forum/index.php?s=&showtopic=595850&view=findpost&p=35653052
i heard this method from someone...but the difference was that he told me to check the 'bootloader update' option also..is it ok?