I hope im on right forum section.
Well, I have CM9 on my xperia pro and would like to go back to STOCK rom, i tryed to flash a STOCK kernel based on ICS .587
this one: http://forum.xda-developers.com/showthread.php?t=1843125
After that i tryed to repair the phone by PC companion, but still not working..wrong software,cant update?
its still CM9 when start the phone now its displays only "the process com.android.phone has stopped"
what to do now?!
MANY THANKS FOR HELPING IN ADVICE!!
/NOOB
Related
after i was put miniCM rom on my x10 mini this massage allways pop up and my phone on airplane mode and i can change that please help me
read the flashtool guide http://forum.xda-developers.com/showthread.php?p=10879507#post10879507
and with it flash your device with a stock rom
i had the same problem with a mini pro and it did the trick for me, now the phone is up and running (been flashed a couple more times)
Marque_jaune said:
read the flashtool guide http://forum.xda-developers.com/showthread.php?p=10879507#post10879507
and with it flash your device with a stock rom
i had the same problem with a mini pro and it did the trick for me, now the phone is up and running (been flashed a couple more times)
Click to expand...
Click to collapse
i know how to flash the phone but i don't wanna have the stock rom i want the cm7 but in the cm rom it gives me that massage..now i already flashed the stock rom but i want cm rom so what can i do?
[HELP] please help, i have flashed the cm7.0 rom and i looped during the SE logo appear, plx help. i juz wanna to flash back to STOCK ROM, wt can i do. THX!
redtab said:
[HELP] please help, i have flashed the cm7.0 rom and i looped during the SE logo appear, plx help. i juz wanna to flash back to STOCK ROM, wt can i do. THX!
Click to expand...
Click to collapse
ok you have two ways as per i know
Try this one first as this will get you latest firmware
Update via Wotan Server -
Link - Update Method 1
Second if via CWM flash but i can't guaranty about it,read the forum and try at your own risk...and also this is not latest firmware as Wotan Server method
Wotan Server is latest one for Xperia Mini (XM)
Link - Update XM via CWM
Returning to Stock ROM, Rooting it again and enabling WiFi, haptic feedback etc
I had that problem, its a prevailing issues with the newest build. There's no solution to using that 'stable' build on Xperia Minis. If you still want to use Cyanogen, get the nightly build. It works, you can try Cyanogen but its quite unstable. One of the biggest problem is the screen orientation lag, which is around 2-3 seconds.
Check this out, I just wrote a guide today for returning to stock ROM.
http://forum.xda-developers.com/showthread.php?p=21234974#post21234974
Hi guys,
(sorry if my words aren't clear, please tell me if any of what I say isn't undestandabble)
Yesterday I installed FeraLabs ICS v2.2 ROM in my x10a. Great ROM, I fell in love with android 4 and cyanogemod, it was my first contact with both. But I had some problems using it, some apps not working, others freezing the entire system, can't send SMS etc. I know that probably most of these bugs already have fixes, the ROM is being developed etc, but I decided that it's not for me yet, this is my main phone and I need it rock solid for day to day use.
So I decided to try some GB rom. But there are a lot of ROMs out there, and I couldn't find a thread answering what's the best for my case, so I'm gonna ask fro suggestions. =D
Here's what I need:
- A stable ROM, fully compatible with my x10a;
- Based on cyanogemod;
- If possible, faster than stock 2.3 ROM;
- If possible, less power-consuming than stock 2.3 ROM, but it's the least important feature (got a 3500mAh battery);
- I personnally don't like the Sony UI improvemments and general bloatwares. I like google default apps and UI. Also used a LG p500 for a year, liked a lot the LG punctual customizations;
- It can have bugs about video recording, I don't use it much;
- It can't have bugs with 3g, wifi, calling and texting (hehehe);
So, what flavors should I try?
Thank you all. ;D
Donut HD 2.2 it's faster than stock and cm and works perfect with good battery life 2
Sent from my X10i using xda premium
Hi,
Thanks for helping.
Looking at the instructions in the thread (http://forum.xda-developers.com/showpost.php?p=30999560&postcount=1167). Will it run OK with the feralabs kernel that is currently is installed in my system? Shouldn't I change hte kernel?
If yes, what kernel should I flash?
Hi guys,
I flashed doomkernel, booted to xRecovery, installed the doomkernel wifi module from zip, booted again to xRecovery, installed the donuthd, booted again, installed donuthd, booted to xRecovery and installed donuthd update.
It's really fast, I've never used and android this fast. I'm currently installing my apps, wanna see if it will keep great at night. =D
But I've seen a problem:
My sms messages aren't being delivered, just like happened with Feralabs ICS 2.2 rom. Anyone got this problem? Does this have some relation with my phone being a x10a (and now it's appearing in in my system settings as x10i) ?
Thanks in advance.
Hi again,
Today I cleaned up my phone and tried to install donutHD + doomkernel again. Everything worked ok, except sending and receiving SMS messages. So I flashed back 2.1 stock firmware and 2.3 (GB) stock firmware, and SMS sending/receiving worked fine again, in both versions.
Does anybody has any clue about what can be happening? When I installed donutHD (about 3 times), I was in 2.1 stock firmware, root/busybox/xrecovery from Flashtool (newest version). The same problem ocurred with the Feralabs ICS v2.2 ROM with feralabs kernel for ICS.
I also tried to flash the 2.3th kernel n5-1 (comming from 2.1 stock firmware), but it got frozen in SE screen, during boot. Even xrecovery couldn't open. =/
=========================== edited:
Problem solved: As observed I was upgrading from 2.1 stock ROM to DonutHD. Doing this upgrade coming from android 2.3 stock ROM, the SMS sending/receiving works like a charm. =D
Hi all,
I have been trying out some JB based ROMs for the last month or so and I have decided to go back to ICS based ROMs but whenever I install a ROM, the phone keeping looping.
Now, I have tried 3 different ROMs and kernels, it doesn't make any difference.
BTW, flashing the stock 587.ftf via flashtool works but I want to install a custom ROM.
Help will be appreciated. Thanks
Anyone?
Make sure you got ICS kernel and ICS ROM.
Hi all,
I have little problem.
I have got "Xperia Mini Pro" with Android 1.6, and I want to upgrade it. I have tried official way with Sony PC Companion.
It told me "New version of ROM for your mobile is available", but after switching off, holding back button, connecting to PC. It said "There is no ROM for your mobile".
What is wrong? Or is anoter way how to flash my mobile with official or unofficial firmware?
Many thanks...
Give this a try. Upgrade to Gingerbread WITHOUT having to change the kernel.
Google this:
MiniCM7Pro_V21.zip
It should be the first link and it should take you to a Google Code page where you can download it.
The only reason I tell you to do this is because the link in the original doesn't work and I can't post outside links since I'm new lol
Info about it here:
http://forum.xda-developers.com/showthread.php?t=1201116
I got one of these nice and small retro devices, still running android 1.6
i am pretty new on these things, how do i properly install a more recent, custom android on it?
Jelly Bean (4.x.x) was the latest version, although in my opinion Gingerbread (v2.3.x) ran the smoothest.
I have some files still available, let me know which ROM you would to get:
/MSM7227 Stock Kernels/X10 mini (E10) stock kernel.ftf
/MSM7227 Stock Kernels/X10 mini pro (U20) Stock Kernel.ftf
/MSM7227 Stock Kernels/W8 and X8 (E16&E15) Stock Kernel.ftf
/SuperOneClick/SuperOneClick.exe
/CWMInstaller-Windows-v5/...
/r3-x10mini-Edify.zip
/CWM-recovery-3.2.0.0-r3-x10mini-Edify.zip
/CWM-recovery-3.2.0.0-r3-x10mini-Amend.zip
/Kernel/E10_2.6.32.61-nAa-06.ftf
/Romx/[X10Mini][ROM][JB 4.1.2] PureSlim R4 October 04/Pure GoogleApps.zip
/Romx/[X10Mini][ROM][JB 4.1.2] PureSlim R4 October 04/PureSlim R4 for Robyn.zip
/Romx/E10i_JBMP-Release4.zip
/Romx/robyn-update-cm-7.1.0-X10Mini-signed.zip
Click to expand...
Click to collapse