Flash ur phones with "Windows 8 x64"
1) download Usbdeview
http://www.mediafire.com/download/41i2k36yyi1fzhz/usbdeview-x64.zip
2) unistall all the MTK65xx drivers u get in it (remember to use this as admin)
3)Reboot ur PC
4)Download Sp drivers for win8
http://www.mediafire.com/download/7yee2of64nhl947/SP_Drivers_v1.4.rar
5)Now open Device manager (right click on My Computer>Manage>Device manager)
6)Remove the battery and connect the phone via USB u will see unknown device in device manager and then MTK65xx Preloader
7)Quickly Right click on the MTK65xx preloader and update driver go for manual and then give the path for sp tools and just select the folder inside SP tools
8) u will c dialouge box asking for installing here select install anyway
9)and u r done.. u will here sound of disconnected device
10)connect again and u will c your device appearing and dissapearing on COM ports
11) Now open sp flash tools use this 1
http://www.mediafire.com/download/wd8au297r6w9qzd/SP_Flash_Tool_v3.1304.0.119.rar
12)dont forget to open sp tools in admin mode..
13) select the scatter file and make sure u have disconnected ur phone
14) select USB in options and force to high speed
15) Press Firmware Upgrade and then insert USB cable to ur phone
16) Sit back for 5-6 min until u c a green circle on ur screen.
Older drivers work if you Disable Driver Signing Enforcement for installing unsigned drivers.
:angel:
boring method
jatin.rewri said:
boring method
Click to expand...
Click to collapse
Glad to see someone else said it and not me. I flashed TWRP 2.5 with SPTOOLS and Flashed SuperSU 1.32 in TWRP and I was on rooted A116 in less than 3 minutes. Isnt that too fast and simple? Yes works on Win8 64bit too.
cmahendra said:
Glad to see someone else said it and not me. I flashed TWRP 2.5 with SPTOOLS and Flashed SuperSU 1.32 in TWRP and I was on rooted A116 in less than 3 minutes. Isnt that too fast and simple? Yes works on Win8 64bit too.
Click to expand...
Click to collapse
Ya that method is too fast and simple bt many of us faced problems in flashing the device for the first time in win8 64bit even i had to use win xp for rooting for the first time....... its not that all are known to ur method so i just posted this method coz many are still crying coz they r unable to flash the original stock 4.2 rom using spflash tool in win8...........
yes...
Titokhan said:
Older drivers work if you Disable Driver Signing Enforcement for installing unsigned drivers.
:angel:
Click to expand...
Click to collapse
yes man...old drivers works...using win 8 x64....
once u need to boot into Disable Driver Signing Enforcement for installing unsigned drivers.
This method aint working in my system.Can anyone provide the old drivers? The preloader comes up for a split second in the com section in device manager and disappears. Any help?
@deepayanneogi
It happens if you try to install it without starting SP Flash Tool first.
What I mean to say is the flash mode persists under Windows only if SP Flash Tool is open. So open SP Flash Tool, connect the mobile, install the driver & then flash it.
Connect your phone without battery and then keep pressing volume down button then you will here sound on your system.... Then reconnect device and you will find it in device manager then install drivers
Sent from my Micromax A116 using xda premium
It worked great and now can root or flash roms by using windows 8 x64 but for installing driver i have to reboot my pc into driver enforcement mode...........
Sent from my Micromax A116 using xda premium
Related
Fastboot & Flashboot ADB Driver installation on Windows 8 Guide for Sony Xperia Users
Hi Guys i made this Video & step by step tutorial for
Fastboot & Flashboot ADB Driver installation on Windows 8 Guide for Sony Xperia Users
Those who have problem with fastboot mode or flashboot mode not detecting on Windows 8 just follow proper steps of my guide
Steps :
1. Go to setting(move ur mouse to right side of screen u find setting below)
2. Change PC Settings
3. Click General section
4. after that scroll down & click Restart now below in Advanced Startup(after this pc'll go in advanced startup mode)
5. Then click here on Troubleshoot
6. after that click on Advanced option's
7. after that click on Startup Setting
8. after that click Restart(after this pc'll boot in advanced startup mode)
9. after advanced startup mode boot pc'll show u bunch of option's screen
10. click 7 ur keyboard(this is Disable driver signature enforcement mode)
11. after this pc'll boot(restart) in Disable driver signature enforcement mode
12. after restart in Disable driver signature enforcement mode go to ur ADB driver's folder click on ADB Driver.exe file after next choose(check on) flashmode driver's & fastboot driver's and install that.
13. after installation driver's restart ur PC
Done :good:
Press Thanks if this Helps U
U can find ADB Driver's for Xperia 2011 User's here- http://www.mediafire.com/?pjpi4p56m90fmka
Here is Video Guide on YouTube= http://youtu.be/glW466Tg7PQ
Better to open this video in YouTube
Good Going Mate :good:
My Pleasure Dude to help Members
elf.rb said:
Good Going Mate :good:
Click to expand...
Click to collapse
amit, u use windows 8 32bit or 64bit ?
pharandeamit said:
Hi Guys i made this Video & step by step tutorial for
Fastboot & Flashboot ADB Driver installation on Windows 8 Guide for Sony Xperia Users
Those who have problem with fastboot mode or flashboot mode not detecting on Windows 8 just follow proper steps of my guide
Steps :
1. Go to setting(move ur mouse to right side of screen u find setting below)
2. Change PC Settings
3. Click General section
4. after that scroll down & click Restart now below in Advanced Startup(after this pc'll go in advanced startup mode)
5. Then click here on Troubleshoot
6. after that click on Advanced option's
7. after that click on Startup Setting
8. after that click Restart(after this pc'll boot in advanced startup mode)
9. after advanced startup mode boot pc'll show u bunch of option's screen
10. click 7 ur keyboard(this is Disable driver signature enforcement mode)
11. after this pc'll boot(restart) in Disable driver signature enforcement mode
12. after restart in Disable driver signature enforcement mode go to ur ADB driver's folder click on ADB Driver.exe file after next choose(check on) flashmode driver's & fastboot driver's and install that.
13. after installation driver's restart ur PC
Done :good:
Press Thanks if this Helps U
U can find ADB Driver's for Xperia 2011 User's on www.xda-developers.com
just Google It
Here is Video Guide on YouTube= http://youtu.be/glW466Tg7PQ
Better to open this video in YouTube
Click to expand...
Click to collapse
thanks much ！
Sent from my MT15i using xda premium
Hey I'm using Windows 8 Pro 64bit....
Sent from my MT11i using xda premium
Hey my pleasure
Sent from my MT11i using xda premium
Hey Guys i updated thread with ADB Driver's for Xperia 2011 Smartphones...Check it out
i`m also use windows 8 pro 64bit,
when install the adb driver. did i need to connect my phone ?
Nope.... Dnt connect ur phone while installing ADB Drivers
kuzenka said:
i`m also use windows 8 pro 64bit,
when install the adb driver. did i need to connect my phone ?
Click to expand...
Click to collapse
still not working for me, i tried it several times >.<
USB Port Problem
jebpascual said:
still not working for me, i tried it several times >.<
Click to expand...
Click to collapse
Me too...
I think is the USB port problem, because I've tried at my old upgraded win8 laptop with USB 2.0 port it works but at new win8 laptop with USB 3.0 port can't detect...
Also I've tried with a hub, but the flashtool detect my phone as flash mode although I'm connect it as fastboot mode...
thanks mate its working fine for me now that im on windows 8. :good:
this is a must have tutorial for windows 8 users
I had a problem with the connection, the solution was to disconnect the mouse from the computer when turning it on. If you have the same problem that all be separate from the computer and reboot it
My mouse: Gigabyte ECO500
Does anyone knows why it doesn't work on my laptop? There are no problems to install the drivers, but the phone doesn't become recognized. I have USB 3.0.
totom96 said:
Does anyone knows why it doesn't work on my laptop? There are no problems to install the drivers, but the phone doesn't become recognized. I have USB 3.0.
Click to expand...
Click to collapse
Same problem here..
I have one usb 2.0 port but still not working
I have win8 x64 single language!
Thanks so much!! Been struggling for an hour to get the fastboot drivers to load. All I had to do it seems was install that file from flashtool dir!! :good::good::good:
the adb backup not functionaly for xperia 2011
Thanks but my problem was solved changed usb port from 3.0 to 2.0
But my problem is it doesn't even recognize flash mode, so i cannot install any driver.
[Q] [Live With Walkman] Can't get flashtool fastboot to work (Windows 8)
Hello guys, i'm still new here. I need your help
So, i was trying to get to fastboot to install my custom kernel for my lww
Here what i do :
1. Not MTP, usb debugging on, etc etc...
2. Turn off my phone
3. Installed the drivers on driver folder of flashtool
4. Vol up + plug to usb, blue led on
5. A window popped on my windows saying it installing S1 Fastboot right now
6. But what do i get is this :
08/007/2013 15:07:12 - ERROR - Drivers need to be installed for connected device.
08/007/2013 15:07:12 - ERROR - You can find them in the drivers folder of Flashtool.
What the heck is wrong? Can someone explain. Thanks before
Re: [Q] [Live With Walkman] Can't get flashtool fastboot to work (Windows 8)
That's a win 8 issue, u need to disable driver signature enforcement and then reinstall the drivers, I will copy the steps in a jiffy.
marvelprash said:
Go to Charms bar > Settings > General > Advanced Startup > Restart Now
Wait till a menu appears
Click Troubleshoot > Advanced options > Startup settings > Restart
After that you will be presented with a menu. The 7th option is "Disable Driver Signature Enforcement"
Press number 7 or F7 to continue booting to Windows 8 with digital signature enforcement disabled.
Now you can install fastboot drivers
Click to expand...
Click to collapse
Here it is
mnishamk said:
That's a win 8 issue, u need to disable driver signature enforcement and then reinstall the drivers, I will copy the steps in a jiffy.
Here it is
Click to expand...
Click to collapse
+1
recently i had this problem and solved by this method then drivers will be installed correctly and u can use the flash tool normally
Re: [Q] [Live With Walkman] Can't get flashtool fastboot to work (Windows 8)
mnishamk said:
That's a win 8 issue, u need to disable driver signature enforcement and then reinstall the drivers, I will copy the steps in a jiffy.
Here it is
Click to expand...
Click to collapse
Okay that method works for me! Nice! Now i can use custom kernel!
Sent from my WT19i using xda app-developers app
mnishamk said:
That's a win 8 issue, u need to disable driver signature enforcement and then reinstall the drivers, I will copy the steps in a jiffy.
Here it is
Click to expand...
Click to collapse
+1
I'm getting a "Not a .Sin" File error in Flashtool with my WT19i
it detects, connects, finds flashable tft, used 2 different ones, and all the same error. Even when i try to unlock bootloader, same error.
whats up? cant find anything online about this
any help would be appreciated
i had a fresh install of windows 7, evn prvsly i was on windows 7 and somehow i had managed to install all drivers for xperia p
but after this fresh install i am unable to go to fastboot , somehow i installed flashmode drivers
i evn installed the drivers from fastboot-drivers.exe but no use when i start flashtool and try to enter fastboot mode i get an error message saying the device drivers are not installed , install these drivers from flashtool folder
what do i do ? evn in device manager when i update it doesnt find any software.. when windows try to install s1boot fastboot drivers it shows not installed
where m i wrong? please help me
I think i had that same problem too, and took me some time to find the right answer, it is probably windows that won't install unsigned drivers, so try reboot, and press F8, and allow installation of unsigned drivers, though i just wrote a CMD code at that page i visited, but i can't find it now lol.
Well try here http://www.techspot.com/community/t...signed-drivers-in-windows-vista-7-x64.127187/
pda net
try to install pda net app on ur pc
if this dont work than open device manager
and plug ur phne in fastboot mode
on device manager ut show s1 fastboot somthing like that just for 5 sec
hurry and double click on that
after that update driver
select browse my computer for driver software
after that select let me pick from a list of device
after that click on android device
and click on next and ur driver is installed
but first install pdanet on ur pc
Hello!
I think my MMX Canvas HD A116 has been soft bricked. :crying:
I'd installed DOGE http://forum.xda-developers.com/showthread.php?t=2663763 ROM, and it was working fine. After that I tried to get backup using Nandroid Manager but it was failed. So, I restarted phone in CWM Recovery mode and tried to backup data from there.
But after that, my phone went dead.
Screen starts for few seconds but it is not showing boot logo and even I'm not able to go into recovery mode also!
My PC or SP Flash Tool is also not recognizing phone.
Will USB Jig work for MMX phones? Is there any hope?!
Please help!
try to reinstall the drivers.. and then connect your device through sptools.
kalpesh_36 said:
try to reinstall the drivers.. and then connect your device through sptools.
Click to expand...
Click to collapse
I tried that.
Still not working! :crying:
try this
1. Turn off the phone by
removing battery.
2. Press and hold the Power button along with both the
‘Volume +’ and ‘Volume -’ buttons until the screen
displays two options.(volume keys first then power key .
after 5-10 seconds holding, Then 2 option will appear)
3. Press the ‘Volume +’ button to enter Recovery Mode.
wipe dalvik, data, cache partion. install MIUI or pure xperia
z2(my choice only, you can try any stable rom) from your
memory card.
shivrajsingh said:
try this
1. Turn off the phone by
removing battery.
2. Press and hold the Power button along with both the
‘Volume +’ and ‘Volume -’ buttons until the screen
displays two options.(volume keys first then power key .
after 5-10 seconds holding, Then 2 option will appear)
3. Press the ‘Volume +’ button to enter Recovery Mode.
wipe dalvik, data, cache partion. install MIUI or pure xperia
z2(my choice only, you can try any stable rom) from your
memory card.
Click to expand...
Click to collapse
Thank you Shivraj for replying.
But as I said in earlier post, my phone is not going into recovery mode. As I press "Volume +" button, it goes off. I wish somehow I can at least boot my phone into recovery mode!
Have anyone tried USB jig for Micromax phones?
aryankirtan said:
Thank you Shivraj for replying.
But as I said in earlier post, my phone is not going into recovery mode. As I press "Volume +" button, it goes off. I wish somehow I can at least boot my phone into recovery mode!
Have anyone tried USB jig for Micromax phones?
Click to expand...
Click to collapse
i guess usb jig only works for Samsung phones..but since u r saying that the device does power on for a second...mayb its not completely bricked...try installing the correct drivers..see if that works?
edwardpage said:
i guess usb jig only works for Samsung phones..but since u r saying that the device does power on for a second...mayb its not completely bricked...try installing the correct drivers..see if that works?
Click to expand...
Click to collapse
That right. Even if USB Jig works on MTk, it will also result in rebooting after 2-3 seconds which you are getting after pressing volume + button. You can only install correct MTK drivers and then install stock rom.
Download Flash Tool , Stock ROM AND USB Driver From Above LINK
NOW Create Folder IN Desktop Give It Name "FLASH"
Copy All Downloaded File In Recently Created Folder "FLASH"
Extract 'SP_Flash_Tool_v3.1304.0.119.rar' AND Also Extract Stock ROM File
NOW Open SP Flash Tools Folder AND Double Click ON "Flashtool.exe"
In Flashtool..Click On SCATTER-LOADING(FOUND IN RIGHT-SIDE) AND Select SCATTER File From STOCK ROM'S Folder
Flashtool Automatic Select All IMGs AND FILEs
NOW Completely Turn Off Your Phone
In Flashtool..Click On "DOWNLOAD" Button
Install USB Driver AND Connect Your Device To Computer
If Everything Is Right Then Process Will Start...Wait Till All Progress Completion
After All Process "GREEN CIRCLE" Appear In Center..
DISCONNECT PHONE AND POWER ON...THAT'S ALL
the correct drivers for mediatek is attached below.
Also, the process after "In Flashtool..Click On "DOWNLOAD" Button" , should be:
1. Open device manager
2. Connect your phone to PC through data cable.
3. New device will appear in device manager for 5-10 seconds only.
4. Quickly right click on newly appeared device and selected update driver.
5. Select drivers from downloaded and extracted attachment.
6. It will successfully install driver.
7. Remove data cable from phone and again insert it in phone.
8. SP tools will recognize it and automatically start flashing since you have already pressed download button earlier.
9. Flashing will complete in 3-4 minutes.
Thank you so much! Finally unbricked my MMX A116
shivrajsingh said:
That right. Even if USB Jig works on MTk, it will also result in rebooting after 2-3 seconds which you are getting after pressing volume + button. You can only install correct MTK drivers and then install stock rom.
Download Flash Tool , Stock ROM AND USB Driver From Above LINK
NOW Create Folder IN Desktop Give It Name "FLASH"
Copy All Downloaded File In Recently Created Folder "FLASH"
Extract 'SP_Flash_Tool_v3.1304.0.119.rar' AND Also Extract Stock ROM File
NOW Open SP Flash Tools Folder AND Double Click ON "Flashtool.exe"
In Flashtool.. Click On SCATTER-LOADING(FOUND IN RIGHT-SIDE) AND Select SCATTER File From STOCK ROM'S Folder
Flashtool Automatic Select All IMGs AND FILEs
NOW Completely Turn Off Your Phone
In Flashtool..Click On "DOWNLOAD" Button
Install USB Driver AND Connect Your Device To Computer
If Everything Is Right Then Process Will Start...Wait Till All Progress Completion
After All Process "GREEN CIRCLE" Appear In Center..
DISCONNECT PHONE AND POWER ON...THAT'S ALL
the correct drivers for mediatek is attached below.
Also, the process after "In Flashtool..Click On "DOWNLOAD" Button" , should be:
1. Open device manager
2. Connect your phone to PC through data cable.
3. New device will appear in device manager for 5-10 seconds only.
4. Quickly right click on newly appeared device and selected update driver.
5. Select drivers from downloaded and extracted attachment.
6. It will successfully install driver.
7. Remove data cable from phone and again insert it in phone.
8. SP tools will recognize it and automatically start flashing since you have already pressed download button earlier.
9. Flashing will complete in 3-4 minutes.
Click to expand...
Click to collapse
Thank you soooo much man. You saved my day... :good:
This drivers worked perfectly and with this method, I finally UNBRICKED my Micromax A116 handset.
Use this drivers for using SP Flash tool with MMX A116.
Perfect!
Thank you Shivraj Singh... :good:
aryankirtan said:
Thank you soooo much man. You saved my day... :good:
This drivers worked perfectly and with this method, I finally UNBRICKED my Micromax A116 handset.
Use this drivers for using SP Flash tool with MMX A116.
Perfect!
Thank you Shivraj Singh... :good:
Click to expand...
Click to collapse
Most welcome
shivrajsingh said:
That right. Even if USB Jig works on MTk, it will also result in rebooting after 2-3 seconds which you are getting after pressing volume + button. You can only install correct MTK drivers and then install stock rom.
Download Flash Tool , Stock ROM AND USB Driver From Above LINK
NOW Create Folder IN Desktop Give It Name "FLASH"
Copy All Downloaded File In Recently Created Folder "FLASH"
Extract 'SP_Flash_Tool_v3.1304.0.119.rar' AND Also Extract Stock ROM File
NOW Open SP Flash Tools Folder AND Double Click ON "Flashtool.exe"
In Flashtool..Click On SCATTER-LOADING(FOUND IN RIGHT-SIDE) AND Select SCATTER File From STOCK ROM'S Folder
Flashtool Automatic Select All IMGs AND FILEs
NOW Completely Turn Off Your Phone
In Flashtool..Click On "DOWNLOAD" Button
Install USB Driver AND Connect Your Device To Computer
If Everything Is Right Then Process Will Start...Wait Till All Progress Completion
After All Process "GREEN CIRCLE" Appear In Center..
DISCONNECT PHONE AND POWER ON...THAT'S ALL
the correct drivers for mediatek is attached below.
Also, the process after "In Flashtool..Click On "DOWNLOAD" Button" , should be:
1. Open device manager
2. Connect your phone to PC through data cable.
3. New device will appear in device manager for 5-10 seconds only.
4. Quickly right click on newly appeared device and selected update driver.
5. Select drivers from downloaded and extracted attachment.
6. It will successfully install driver.
7. Remove data cable from phone and again insert it in phone.
8. SP tools will recognize it and automatically start flashing since you have already pressed download button earlier.
9. Flashing will complete in 3-4 minutes.
Click to expand...
Click to collapse
Hello sir pls. Help me. I too want to flash the v5 of stock ROM but i the driver you have suggested below contains nothing.pls help how to proceed ahead.
alex279 said:
Hello sir pls. Help me. I too want to flash the v5 of stock ROM but i the driver you have suggested below contains nothing.pls help how to proceed ahead.
Click to expand...
Click to collapse
They contain drivers only. SP tools and stock rom needs to be downloaded separately.
need help for drivers
shivrajsingh said:
They contain drivers only. SP tools and stock rom needs to be downloaded separately.
Click to expand...
Click to collapse
very much thankful for the reply.... i am having the other 2 but facing problem with only the drivers, going through sp tools...scatter loading...download....no detection of my device... this might be due to drivers. i found nothing in your 11kb drivers. pls suggest me how i can download the correct drivers. pls. if possible elaborate it stepwise(as i m doing it for the first time/newbie)......hope a quick reply from your side
alex279 said:
very much thankful for the reply.... i am having the other 2 but facing problem with only the drivers, going through sp tools...scatter loading...download....no detection of my device... this might be due to drivers. i found nothing in your 11kb drivers. pls suggest me how i can download the correct drivers. pls. if possible elaborate it stepwise(as i m doing it for the first time/newbie)......hope a quick reply from your side
Click to expand...
Click to collapse
Which windows version, u r using??
.....!!!!!
shivrajsingh said:
Which windows version, u r using??
Click to expand...
Click to collapse
Using windows 8 - 64Bit
alex279 said:
Using windows 8 - 64Bit
Click to expand...
Click to collapse
First disable driver signing (Windows 8 users Only)
use this link for tutorial.....
https://learn.sparkfun.com/tutorial...abling-signed-driver-enforcement-on-windows-8
Now extract the mtk universal driver attachment.
1. Open device manager
2. Connect your phone to PC through data cable.
3. New device will appear in device manager for 5-10 seconds only.
4. Quickly right click on newly appeared device and selected update driver.
5. Select drivers from downloaded and extracted attachment.(right click on new appeared device -> browse my computer for drivers-> browse windows 7 drivers i.e. usb2ser_Win764 in extracted folder)
6. It will successfully install driver.
7. Remove data cable from phone and again insert it in phone.
8. SP tools will recognize it and automatically start flashing since you have already pressed download button earlier.
9. Flashing will complete in 3-4 minutes.
Hello many thnx to you for this useful info. Now i have flashed the device successfully.... Pls. if you can help me to swap the phone storage with the external sd card then it would be great help for me. Actually i have tried to do so but some how i bricked the device & that is why i have to flash.... Pls. Sir give me details guide on how to swap memory on canvas HD A116
Sent from my Micromax A116i using XDA Premium 4 mobile app
alex279 said:
Hello many thnx to you for this useful info. Now i have flashed the device successfully.... Pls. if you can help me to swap the phone storage with the external sd card then it would be great help for me. Actually i have tried to do so but some how i bricked the device & that is why i have to flash.... Pls. Sir give me details guide on how to swap memory on canvas HD A116
Sent from my Micromax A116i using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hello friend,
Try this way: http://forum.xda-developers.com/showthread.php?t=2346389
As it works on MediaTek devices and MMX A116 is one of this.
pls suggest me how i can download the correct drivers.
aryankirtan said:
Hello!
I think my MMX Canvas HD A116 has been soft bricked. :crying:
I'd installed DOGE http://forum.xda-developers.com/showthread.php?t=2663763 ROM, and it was working fine. After that I tried to get backup using Nandroid Manager but it was failed. So, I restarted phone in CWM Recovery mode and tried to backup data from there.
But after that, my phone went dead.
Screen starts for few seconds but it is not showing boot logo and even I'm not able to go into recovery mode also!
My PC or SP Flash Tool is also not recognizing phone.
Will USB Jig work for MMX phones? Is there any hope?!
Please help!
Click to expand...
Click to collapse
It had to me once, when I was going to flash the stock rom from SP Flash tools. I think there was some drivers problem, and the process stopped in between, and when i tried to turn the phone on, it only emitted some light and would stay that until the battery would drain. After a few days, it went dead, no response. This was the time I realized that I had to give it to a service center. Unfortunately, the service was awfully bad, and my phone came repaired back after 3 MONTHS! So, I recommend, that you hand it over to a non-micromax service center (as your warranty is now void), and try your luck! All the best!
P.S. My CHD is working awesome now, installed MiUi
[email protected] said:
pls suggest me how i can download the correct drivers.
Click to expand...
Click to collapse
download Mt65xx vcom drivers then see the video below
---------- Post added at 12:54 PM ---------- Previous post was at 12:06 PM ----------
aryankirtan said:
Thank you Shivraj for replying.
But as I said in earlier post, my phone is not going into recovery mode. As I press "Volume +" button, it goes off. I wish somehow I can at least boot my phone into recovery mode!
Have anyone tried USB jig for Micromax phones?
Click to expand...
Click to collapse
just flash the stock backup using SP flash tool
Hey Guys
I bricked my P780 and didnt do a backup. I formated the phone with SpFlashTool, afterwards the Flashing didnt work. And a second format didnt work too.
Now i tried nearly every possible tutorial on the web...
I am using win7
My main problem is that i am using SpFlashTool (newest version) and i get an 4032 Error if i try to download the rom.
I tried nearly every Rom for the p780 with every possible scatter file.
I tried nearly every MediaTek DA VCOM USB Driver, MediaTek PreLoader VCOM USB Driver and MTK USB Port Driver and always with no success.
I even plugged out the battery (its not removable) without damaging the phone...
Spackotus said:
Hey Guys
I bricked my P780 and didnt do a backup. I formated the phone with SpFlashTool, afterwards the Flashing didnt work. And a second format didnt work too.
Now i tried nearly every possible tutorial on the web...
I am using win7
My main problem is that i am using SpFlashTool (newest version) and i get an 4032 Error if i try to download the rom.
I tried nearly every Rom for the p780 with every possible scatter file.
I tried nearly every MediaTek DA VCOM USB Driver, MediaTek PreLoader VCOM USB Driver and MTK USB Port Driver and always with no success.
I even plugged out the battery (its not removable) without damaging the phone...
Click to expand...
Click to collapse
Hi. Because you have formated your nand you must reinstall your drivers, because your preloader now is messed up.
In order to do that you must do this:
1. Install drivers.
2. Go to device manager and let the window open.
3. Connect your phone and new hardware should appear for just a seccond or 2 max, something with MTK 6.5.XXX.
4. Click very fast on the little new thing that appear there because will desapear.
5. Now press the button to update drivers hardware. In one of my posts you will find an archive with the right drivers. Drivers are on the archive uploaded here.
6. After the drivers are installed your PC should recognize the phone.
7. After this the steps should be the same to flash your ROM. Oh and by the way: Press Firmware Upgrade button not Download. And dont forget to check DA/DL With Checksum... option
8. Waiting for feedback.
9. Good Luck.
stympy said:
Hi. Because you have formated your nand you must reinstall your drivers, because your preloader now is messed up.
In order to do that you must do this:
1. Install drivers.
2. Go to device manager and let the window open.
3. Connect your phone and new hardware should appear for just a seccond or 2 max, something with MTK 6.5.XXX.
4. Click very fast on the little new thing that appear there because will desapear.
5. Now press the button to update drivers hardware. In one of my posts you will find an archive with the right drivers. Drivers are on the archive uploaded here.
6. After the drivers are installed your PC should recognize the phone.
7. After this the steps should be the same to flash your ROM. Oh and by the way: Press Firmware Upgrade button not Download. And dont forget to check DA/DL With Checksum... option
8. Waiting for feedback.
9. Good Luck.
Click to expand...
Click to collapse
First of all thanx!
But whitch driver i should install in Point 1. ?
Second, what should i do if the device is appearing for 2 sec, the device appears straight as unknown device and then replugs itself every 30 sec
Spackotus said:
First of all thanx!
But whitch driver i should install in Point 1. ?
Second, what should i do if the device is appearing for 2 sec, the device appears straight as unknown device and then replugs itself every 30 sec
Click to expand...
Click to collapse
Hi. The drivers i uploaded to you at my post!
For the new device you must have the device manager window open ! Only there you will find the preloader.
stympy said:
Hi. The drivers i uploaded to you at my post!
For the new device you must have the device manager window open ! Only there you will find the preloader.
Click to expand...
Click to collapse
Well the device appears straight as MTK USB Port, , there is no 2 sec TimeFrame when the device apears as MT65xx
an yes, i installed your driver, i am even using a new installation of win7
Hi guys.. sory to butt in... but im experiencing the same problem where in my case i have lenovo s720 instead.
Does the solution works for u?? Mine says something about partition manager eror.
beckham_totti said:
Hi guys.. sory to butt in... but im experiencing the same problem where in my case i have lenovo s720 instead.
Does the solution works for u?? Mine says something about partition manager eror.
Click to expand...
Click to collapse
The solution should work for you! Or else search on this forum itself and you will get your answer!