(sorry about my chinglish )
So here's how:I locked my nexus10 and forgot the password, and I do not see the "Forgotten" button on the screen and also I didn't turn USB debugging mode on, so is there any possibility I can save my data instead of cleaning them up? Thank you (btw, I deleted the original recover files(because I once booted Ubuntu Touch on it) how can I reset it anyway?) Tanks a lot
Don't think there's a way..
And you should be glad because if it was possible anyone could break into your device.
P.S.
chinglish - like!
eytan123 said:
Don't think there's a way..
And you should be glad because if it was possible anyone could break into your device.
P.S.
chinglish - like!
Click to expand...
Click to collapse
yeah........I see, so how can I clean everything, the recovery is dead and I didn't turn the debugging mode on
Right from Google:
1.If your tablet is on, power it off.
2.Press and hold Power, Volume Up, and Volume Down at the same time for several seconds. You will see the word Start with an arrow drawn around it.
3.Press Volume Down twice, until you see the option Recovery mode.
4.Press Power to restart into Recovery mode. You should see an image of an Android with a red exclamation point.
5.While holding down Power, press Volume Up.
6.Use the Volume keys to scroll to Wipe data/factory reset and press Power to select it.
7.Scroll down to Yes - erase all user data and press Power to select it.
Note: If at any point during the above steps your tablet becomes unresponsive, you can restart it by holding down the Power button for several seconds.
eytan123 said:
Right from Google:
1.If your tablet is on, power it off.
2.Press and hold Power, Volume Up, and Volume Down at the same time for several seconds. You will see the word Start with an arrow drawn around it.
3.Press Volume Down twice, until you see the option Recovery mode.
4.Press Power to restart into Recovery mode. You should see an image of an Android with a red exclamation point.
5.While holding down Power, press Volume Up.
6.Use the Volume keys to scroll to Wipe data/factory reset and press Power to select it.
7.Scroll down to Yes - erase all user data and press Power to select it.
Note: If at any point during the above steps your tablet becomes unresponsive, you can restart it by holding down the Power button for several seconds.
Click to expand...
Click to collapse
The recovery has been deleted by me when I boot Ubuntu Touch on it
u cant get download mode and flash recovery? debuging must be on to do it? i dont think should be on.
Sent from my GT-I9100
Fastboot
You can use Fastboot without USB Debugging enabled.
"To use fastboot, power off, then hold down the power button and both volume buttons. That will take you to the bootloader screen where you, or the toolkit, can do fastboot commands."
I've attached a CWM Recovery image for your device.
Place it somewhere on your computer and open the Terminal application on your computer. Run the following command:
fastboot flash recovery <image location>
Then you can backup /data using advanced backup, perform a factory reset, CREATE A FULL BACKUP, then restore /data using advanced restore.
Related
Can someone please set out in easy to follow steps how I can safely reset my Streak 5 to a factory fresh state.
Many thanks!
go to Settings - Privacy - Factory data reset and push Reset phone.
Turn it off. When off, push vol up and vol down, and turn ir up. When Dell logo appears, release power button but continue pressing vol up and vol down. Then, you'll see a menu, and there is FACTORY RESET.
Please use the Q&A Forum for questions Thanks
Moving to Q&A
netomx said:
Turn it off. When off, push vol up and vol down, and turn ir up. When Dell logo appears, release power button but continue pressing vol up and vol down. Then, you'll see a menu, and there is FACTORY RESET.
Click to expand...
Click to collapse
netomx
In reply to my question on factory reset you said 'Turn it off. When off, push vol up and vol down, and turn ir up.'
What do you mean by 'and turn ir up?'
He meant to say "turn it on".
Turn the Streak off.
While holding down the volume up and volume down buttons, press and hold the power button until the Dell logo appears.
Release the power button, but continue holding the volume buttons until Dell's recovery menu appears on the screen.
Using the volume buttons, select option 1, factory reset, then press the camera button.
Follow the instructions on the screen to reset.
Note: this this requires a stock recovery image to work. If the device has Streakmod Recovery or Clockworkmod, replace them with a stock recovery image before attempting to reset.
My friend thought that to change from android to webos he had to press the power button and volume up to enter moboot, but he enter to the bootloader mode (big usb connection icon). I tried to power it off and combine power button and volume to see if I can get out of this and nothing. The only solution is to wait for the charge to deplete?
EDIT: It turned off by it self this thread can be close.
just so you know for the future, holding the power button along with the center button for a few seconds does a soft reset even while stuck in recovery or while booted in webos.
Just got a 2nd hand legend, I cleared the data (hard reset?) without a storage card in it.
now stuck in GERMAN. I have tried to hard reset by useing volume buttons and power key but this does not appear to work!
sara7 said:
Just got a 2nd hand legend, I cleared the data (hard reset?) without a storage card in it.
now stuck in GERMAN. I have tried to hard reset by useing volume buttons and power key but this does not appear to work!
Click to expand...
Click to collapse
How to go in Recovery, Fastboot mode and Bootloader mode.
=====================================================================
1) Bootloader Mode:
While your devices is powerd off, press "Power" + "Vol. Down"
until Bootloader screen appears.
-----------------------------------------------------------------------------
1.5) How to use buttons in Bootloader,Recovery and Fastboot mode:
"Volume Up" : go to previous item
"Volume Down": go to next item
"Power" : to select item
-----------------------------------------------------------------------------
2) Fastboot Mode
While in bootloader mode,
press power button and you are in fastboot mode
-----------------------------------------------------------------------------
3) Recovery Mode
While in bootloader mode, press "Vol. Down" and after
press "Power" button and after that you are in a screen
with a phone and an alert press "Vol. Up" + "Power" to go in recovery
sara7 said:
Just got a 2nd hand legend, I cleared the data (hard reset?) without a storage card in it.
now stuck in GERMAN. I have tried to hard reset by useing volume buttons and power key but this does not appear to work!
Click to expand...
Click to collapse
Remove and then reinsert the battery.
Hello,
My xt916 bricked for no reason. It is not rooted. Do not respond to any commands such power, power + volume down, power + volume up. The only sign of life is when connected to charger or USB the back home and menu buttons on the bottom light in white.
Searching for solutions I tried to flash stock again with MTK-RSD Lite ver 6.1.6. Used rom XT916_2_26D_2014_A02_MP.mzf
The device appears as connected and enters download mode. The process completes and it shows PASS at the end.
However no sign of life afterwards. Same as before.
Tried to enter recovery mode or fastboot via ADB but when I type adb devices nothing is shown.
beniciof98 said:
Hello,
My xt916 bricked for no reason. It is not rooted. Do not respond to any commands such power, power + volume down, power + volume up. The only sign of life is when connected to charger or USB the back home and menu buttons on the bottom light in white.
Searching for solutions I tried to flash stock again with MTK-RSD Lite ver 6.1.6. Used rom XT916_2_26D_2014_A02_MP.mzf
The device appears as connected and enters download mode. The process completes and it shows PASS at the end.
However no sign of life afterwards. Same as before.
Tried to enter recovery mode or fastboot via ADB but when I type adb devices nothing is shown.
Click to expand...
Click to collapse
Follow these instructions to perform a factory reset on the Razr and Razr D1 D3:
*
With the phone off, remove your SIM card, then press the power button for 1 second while pressing the volume button up
Select the recovery mode by pressing the volume key down until the factory mode (Factory) and press the power button
Wait for the Android appears and press the volume up
Scroll to wipe data / factory reset (wipe data / Factory reset) and press the power button
Scroll to the option Yes - Delete all data (Yes, delete all user data) and press the power button
Select Reboot System Now (Reboot system now) by pressing the power button
Remind client will lose all data stored in the internal memory.
https://motorola-global-es-latam.cu.../prod_answer_detail/a_id/93717/p/30,6720,8632
Sent from my KFFOWI using Tapatalk
sd_shadow said:
Follow these instructions to perform a factory reset on the Razr and Razr D1 D3:
*
With the phone off, remove your SIM card, then press the power button for 1 second while pressing the volume button up
Select the recovery mode by pressing the volume key down until the factory mode (Factory) and press the power button
Wait for the Android appears and press the volume up
Scroll to wipe data / factory reset (wipe data / Factory reset) and press the power button
Scroll to the option Yes - Delete all data (Yes, delete all user data) and press the power button
Select Reboot System Now (Reboot system now) by pressing the power button
Remind client will lose all data stored in the internal memory.
*** edit link removed *****
Sent from my KFFOWI using Tapatalk
Click to expand...
Click to collapse
Thanks for the tip. Already tried this. The phone only lights up when connected by USB or charger. Whether is connected or disconnected (with battery only) it does not respond at all to any key combinations.
The only noticeable thing it is when connected by USB with RSD Lite software when I try power volume down the phone enters download mode and I can flash a rom.
beniciof98 said:
Thanks for the tip. Already tried this. The phone only lights up when connected by USB or charger. Whether is connected or disconnected (with battery only) it does not respond at all to any key combinations.
The only noticeable thing it is when connected by USB with RSD Lite software when I try power volume down the phone enters download mode and I can flash a rom.
Click to expand...
Click to collapse
try house of moto
Moto Drivers, RSD Lite, and other Unbricking Tools
Sent from my KFFOWI using XDA Labs
thanks. gonna give it a shot. I figure out it would not be a very simple solution since I've tried many other solutions until get here.
Old LG G5 I had previously installed Lineage on. Was in a drawer until I decided to charge it up and let one of my kids play games on it. When I input the correct screen lock pattern, it goes black, then comes back to lock screen.
I am able to hold power button to then select power off, restart, etc. From power off, I power on and get the orange triangle recommending to lock the bootloader. But no combination of power and vol-down or power and vol-up will get me to TWRP. It just rolls right back in to Lineage.
Also, from power off, if I plug in to my Linux laptop, it will power on and go to fastboot.
Feels like USB debug got turned off and/or trust somehow got revoked, but I never had this laptop connected to it so probably doesn't matter. But like I said, my unlock pattern is working. I get different response with correct pattern versus incorrect.
I'm also able to see the phone from my https://google.com/android/devicemanager page. I tried to send a secure and erase thinking it might let me start from scratch, but I only see a notification that "Device Located" and it never does anything.
And finally, lsusb -v does see the phone, but adb devices never does.
My question is any idea how to get back to TWRP to wipe and push an updated image or even put an updated TWRP?
Try this ...
It's like getting into Stock Recovery. To get into TWRP Recovery using button combination (hard reset) you'll need to hold volume down button and power button simultaneously, releasing power button (temporarily) once LG logo appears then quickly pressing and holding power button again, all the while maintaining hold on volume down button. The stock recovery message (white background) will appear requiring you to select volume up/down button to continue to reset software (see attached image). If you select yes it will appear to factory reset but will actually boot into TWRP.
Hope that helps!
Aimless Rambler said:
It's like getting into Stock Recovery. To get into TWRP Recovery using button combination (hard reset) you'll need to hold volume down button and power button simultaneously, releasing power button (temporarily) once LG logo appears then quickly pressing and holding power button again, all the while maintaining hold on volume down button. The stock recovery message (white background) will appear requiring you to select volume up/down button to continue to reset software (see attached image). If you select yes it will appear to factory reset but will actually boot into TWRP.
Hope that helps!
Click to expand...
Click to collapse
That did the trick! Thanks a ton.
dwcasey said:
That did the trick! Thanks a ton.
Click to expand...
Click to collapse
Good to hear!