Is that anyway to extract /sdcard to userdata.img and then flash to other s3 through Odin?
just the /sdcard? copy and paste
userdata.img is /data not /sdcard.
Yes /sdcard is technically /data/media but this is omitted from userdata.img
Sent from my GT-I9300 using Tapatalk 2
Glebun said:
just the /sdcard? copy and paste
Click to expand...
Click to collapse
I want to make a odin userdata.img as i want to transfer 3.7GB / 3,949 files / 590 folders to each i9300 which is the GPS app+data
Is that any method to do it in the fastest way?
benkywong said:
I want to make a odin userdata.img
Click to expand...
Click to collapse
As per my post use data.img is nothing to do with sdcard.
If you want to transfer data to another device, copy data off using a computer
Sent from my GT-I9300 using Tapatalk 2
rootSU said:
As per my post use data.img is nothing to do with sdcard.
If you want to transfer data to another device, copy data off using a computer
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
so the fastest way is still using usb+mtp transfer?
yes
Glebun said:
yes
Click to expand...
Click to collapse
thanks for the bad information... but is it possible to do it this way?
dd if=/dev/block/mmcblk0p12 of=storage/extSdCard/userdata.img
then $ tar -H ustar -c userdata.img > odin.tar
finally perform odin update?
Please will you read what I have already said?
userdata.img goes to /data. This is NOT useful for you. /sdcard or /extSdCard CANNOT be flashed using userdata.img via Odin!
Sent from my GT-I9300 using Tapatalk 2
rootSU said:
Please will you read what I have already said?
userdata.img goes to /data. This is NOT useful for you. /sdcard or /extSdCard CANNOT be flashed using userdata.img via Odin!
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Thanks for ur information, I just wondering if there are any ways to transfer 3.7GB data to over 1000+ i9300 pba only, adb doesn't work as those pba w/o LCD
now i can just flash, then transfer files using MTP and click several times skip/don't convert, it is really annoying...
Windows and Linux will both have options to "do this action for all". In other words, you should only have to press "skip" or "over write" once.
You could zip the data, move the single file then unzip it but this will take longer.
Alternatively you could make a cwm flashable zip that unpacks to where you want - again, a lot of effort.
Dragging off and dragging back via MTP is quickest
Sent from my GT-I9300 using Tapatalk 2
skip one time, don't convert one time, 8 devices at once = 16 times...
on the other hand, wt is the purpose of UMS in Odin Flasher?
8 devices at once? What on earth are you doing?
Sent from my GT-I9300 using Tapatalk 2
benkywong said:
thanks for the bad information...
Click to expand...
Click to collapse
you didn't like my information?
sorry i just mean the news is bad, ur information is good but i am sad to hear it...
err, why?
Related
I might get flamed, but it's okay. What are the command lines for doing a system dump on the Note. I've tried performing one, but not having much luck doing it. It could be wrong commands lines. IDK. Im trying to make a stock CWM flashable zip. I would like to start on my own rom. Please no laughing.Lol.
On A Side NOTE(Get it,NOTE)I am still looking(Google-ing)for the info. Thanks
I will send you the dd commands when I get home tonight
Sent from my SGH-I717D using xda premium
pterry30 said:
I will send you the dd commands when I get home tonight
Sent from my SGH-I717D using xda premium
Click to expand...
Click to collapse
Thank you very much.:thumbup:
bigfau said:
I might get flamed, but it's okay. What are the command lines for doing a system dump on the Note. I've tried performing one, but not having much luck doing it. It could be wrong commands lines. IDK. Im trying to make a stock CWM flashable zip. I would like to start on my own rom. Please no laughing.Lol.
On A Side NOTE(Get it,NOTE)I am still looking(Google-ing)for the info. Thanks
Click to expand...
Click to collapse
Code:
dd if=/dev/block/mmcblk0p24 of=/sdcard/system.img
there are other ways to get a dump, like simply getting the content:
Code:
tar czvf /sdcard/system.tgz /system
both commands need root, and they are quite possibly not on the device by default, so you probably need busybox
i don't really recommend the second command, because some other blocks are mounted into the system (like the modem),
so you would get unnecessary data
Thank you very much. :thumbup:
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Im getting""dd" is not recognized as an internal or external command, operable program or batch file"
Anyone have any insight as to what I am doing wrong?
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
You have to type in adb first then the dd commands
Sent from my SGH-I717D using xda premium
In cmd
Sent from my SGH-I717D using xda premium
In Cmd did you switch from c.directory to Androidsdk/tools directory. Then your adb should work ?
Sent from my SGH-I717D using xda premium
pterry30 said:
In Cmd did you switch from c.directory to Androidsdk/tools directory. Then your adb should work ?
Sent from my SGH-I717D using xda premium
Click to expand...
Click to collapse
Thanks buddy. I knew I was missing something. Thank you.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
If you can't get it working pm me. I will tell you exactly what to type in to switch directors, I have it written down at home, I always forget myself
Sent from my SGH-I717D using xda premium
cd (directory of choice) lol
cd= change directories
And remember windows uses backslashes for sub directories.
How would I go about extracting apps etc,etc..?
bigfau said:
How would I go about extracting apps etc,etc..?
Click to expand...
Click to collapse
-_-
there should be a few ext4 drivers or mount tools out there,
google, download one that looks good, and mount the image,
then you should have the drive mounted, and you should be able to access/modify the data
bigfau said:
I might get flamed, but it's okay. What are the command lines for doing a system dump on the Note. I've tried performing one, but not having much luck doing it. It could be wrong commands lines. IDK. Im trying to make a stock CWM flashable zip. I would like to start on my own rom. Please no laughing.Lol.
On A Side NOTE(Get it,NOTE)I am still looking(Google-ing)for the info. Thanks
Click to expand...
Click to collapse
That woulds be tits bro !!! A stock cwm flash rom
Sent from my SGH-I717R using xda premium
matt3allen said:
That woulds be tits bro !!! A stock cwm flash rom
Sent from my SGH-I717R using xda premium
Click to expand...
Click to collapse
I'm trying.Lol.I'm stuck at trying to deodex the apks. I try to stay away command prompts.I get confused doing those.Lmao. I use tools like apk manager, AutoApk Tool, AutoDeodex Tool. I'm still trying to get my computer setup back in order.
EDIT: Only half of the apps and jar files deodexed. Any suggestion or pointers?
Bump dump
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Does anyone have an already deodexed stock rom that they would be willing to share?
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
And,comes another guide from me.... I was actually extracting a stock firmware and this came into my mind
Ok,I made this guide since the process of extracting firmware is a bit confusing sometimes.So,lets start with it
What you would need:
1.7zip or any other zip utility
2.Stock Firmware
3.MagicISO
4.Nothing else
Tutorial:
1.Start off by downloading a stock firmware,for this guide,we assume its DDKQ8
2.You will get 2 files, S5830DDKQ8_<bla bla>.tar.md5 and SS_DL.dll
3.Ignore the second file,we only need the first file which has an extension of .md5
4.Now its not possible to extract the file with the current extension.
5.So,rename the file S5830DDKQ8_<bla bla>.tar.md5 to S5830DDKQ8_<bla bla>.tar
6.Now,the file is extractable,so extract it.
7.You will get approx. 9 files: arm11 boot,amss,csc.rfs and various others.
8.Delete all the files except boot.img and system.rfs.These are the only files we need.
9.Now,using MagicISO,open up system.rfs and extract it.
10.Make a new folder named Rom_working
11.Now,move the boot.img there
12.Make a folder called system
13.Move all contents of system.rfs to this this folder.
14.Now all you need is a META-INF folder to complete the rom.(Unless you messed up)
Thats it! Pretty easy huh,this is something really basic,but a few people get confused on extracting it anyway.Its just meant to be a basic guides for those people.If you want to get more info on making a rom,refer this guide which i wrote a few months ago.Hope this helped you guys out.
NOTE: I am not responsible if you mess up your phone or w/e happens to it.Btw,<bla bla> stands for the rest of the filename
thanks for that,, i was woundering how it was done,, i ended up using a nandroid backup with kitchen to make my own lol
How can I root the rom??
Sent from my GT-S5830 using xda premium
Where do we get a META-INF folder?
Do we use CWM recovery to restore with the new folder?
lypang said:
Where do we get a META-INF folder?
Do we use CWM recovery to restore with the new folder?
Click to expand...
Click to collapse
You can get a META-INF folder by creating one yourself
I don't understand your 2nd question though
dredremon said:
How can I root the rom??
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
Take su bin file from a rooted rom and insert it in your rom.Done.
lypang said:
Where do we get a META-INF folder?
Do we use CWM recovery to restore with the new folder?
Click to expand...
Click to collapse
Make one yourself,refer other stock roms for the path,then get the update binaries and script from BlackHawk (if stock ONLY).
okay, this is to flash via CWM is not it? how to change the kernel?
Sent from my GT-S5830 using xda premium
modolheula said:
okay, this is to flash via CWM is not it? how to change the kernel?
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
Kernel is in boot.img. If u want to change kernel, you should change the boot.img
Sent from my fingers to your face,take it or leave it.
okay, I'm trying to find out about the boot.img .... thanks for sharing knowledge
Sent from my GT-S5830 using xda premium
Well, on Linux I usually do this: http://forum.xda-developers.com/showpost.php?p=28933492&postcount=3
Hmm is it possible to extract a stock ROM from the phone itself? Or not extract but get the stock ROM as zip (with those md5 files, etc) so that it can be flashed via Odin on another phone?
It's because i can't find anywhere to download the stock ROM i had...
Sent from my GT-S5830 I think...
Millenium3 said:
Hmm is it possible to extract a stock ROM from the phone itself? Or not extract but get the stock ROM as zip (with those md5 files, etc) so that it can be flashed via Odin on another phone?
It's because i can't find anywhere to download the stock ROM i had...
Sent from my GT-S5830 I think...
Click to expand...
Click to collapse
Many ways:
1.Adb pull /system
2.Manual copy and paste with file xplorer
3.Use Qtadb and copy /system
Sent from the year 3000 using a SGA where sheep's are not present.
Prawesome said:
Many ways:
1.Adb pull /system
2.Manual copy and paste with file xplorer
3.Use Qtadb and copy /system
Sent from the year 3000 using a SGA where sheep's are not present.
Click to expand...
Click to collapse
Y U No like cwm backups ?
Prawesome said:
Many ways:
1.Adb pull /system
2.Manual copy and paste with file xplorer
3.Use Qtadb and copy /system
Sent from the year 3000 using a SGA where sheep's are not present.
Click to expand...
Click to collapse
Thanks i will try and post if i have any problems
madman said:
Y U No like cwm backups ?
Click to expand...
Click to collapse
I want to flash the rom in another phone... or maybe it works by copying the backup files cwm made into the another phone? But anyways i tried to restore the stock rom once but it failed.. but thanx
PS: i actually thought the thread was the guide for my question
Sent from my GT-S5830 I think...
Don't forget to press thanks button..!!
Prawesome said:
Many ways:
1.Adb pull /system
2.Manual copy and paste with file xplorer
3.Use Qtadb and copy /system
Sent from the year 3000 using a SGA where sheep's are not present.
Click to expand...
Click to collapse
ok sorry for late reply
after pull /system how can i make the stock ROM flashable through ODIN on another phone?
or at least another way to flash the rom? adb push?
Millenium3 said:
ok sorry for late reply
after pull /system how can i make the stock ROM flashable through ODIN on another phone?
or at least another way to flash the rom? adb push?
Click to expand...
Click to collapse
For Odin flash,refer freeyourandroid.com.
For CWM flash,take updater script and binary from Blackhawk and put it in your rom
Sent from the year 3000 using a SGA where sheep's are not present.
dredremon said:
How can I root the rom??
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
Download root file with su and extract it you will find the files you need there.
Sent from my GT-S5830 using xda app-developers app
can some1 tell me what i did wrong? I made a flashable zip, and after installation phone is not booting.
TechNoJerky said:
can some1 tell me what i did wrong? I made a flashable zip, and after installation phone is not booting.
Click to expand...
Click to collapse
Logcat or it didn't happen
Insert witty sentence here
Hi GUys
I was using Ram Manager . I changed the Heap size to 128 Byte and Noow the phone is stuck on Boot Logo.
I'm rooted on Stock Firmware.
Please help, urgent
Did you backup?
Sent from my GT-I9300 using xda app-developers app
Try another kernel
Nandroid ftw!!
Sent from my GT-I9300 using xda premium
philicibine said:
Try another kernel
Nandroid ftw!!
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
No backup. I've not made any backup beacuse I'm stupid.
Please help; will Reset to factory setting help?
Boot into recovery, connect to your computer, open command prompt and type adb pull /system/build.prop
Edit the build.prop with notepad++ and fix the VM size, chances are that app set the VM size as 128 or 128mb instead of 128m which it should be.
Then once its fixed just adb push it back to /system/build.prop
Sent from my GT-I9300 using xda premium
nodstuff said:
Boot into recovery, connect to your computer, open command prompt and type adb pull /system/build.prop
Edit the build.prop with notepad++ and fix the VM size, chances are that app set the VM size as 128 or 128mb instead of 128m which it should be.
Then once its fixed just adb push it back to /system/build.prop
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I'm Really noob . Please tell how to :
Boot into Recovery?
How do I push adb ?
eggman89 said:
I'm Really noob . Please tell how to :
Boot into Recovery?
How do I push adb ?
Click to expand...
Click to collapse
Hold volume down, home button and power button together and it will boot into recovery.
I take it you don't have the android sdk on your computer? You need that to use adb.
If not then the easiest option is to factory reset, or maybe someone will make you a flashable zip that will replace your build.prop.
Sent from my GT-I9300 using xda premium
How do I :
"open command prompt and type adb pull /system/build.prop" .
Is it the windows Command Propmt?
If you have these questions you honestly shouldn't be messing with heap size.
Sent from my LG-E739 using Tapatalk 2
eggman89 said:
How do I :
"open command prompt and type adb pull /system/build.prop" .
Is it the windows Command Propmt?
Click to expand...
Click to collapse
Yes, that's it.
First type "adb devices" (no" ")
If you get a long serial number then adb is set up on your computer but I doubt it seeing as you are asking how to boot into recovery.
I take it you have a custom recovery?
If you give me a few mins I'll make you a flashable zip that will replace your build.prop, tell me what rom you are on
Sent from my GT-I9300 using xda premium
Lutin said:
If you have these questions you honestly shouldn't be messing with heap size.
Sent from my LG-E739 using Tapatalk 2
Click to expand...
Click to collapse
I know. I made a stupid mistake and I don't even know why I changed it?
How do I do factory reset?What will I lose?
nodstuff said:
Yes, that's it.
First type "adb devices" (no" ")
If you get a long serial number then adb is set up on your computer but I doubt it seeing as you are asking how to boot into recovery.
I take it you have a custom recovery?
If you give me a few mins I'll make you a flashable zip that will replace your build.prop, tell me what rom you are on
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Hi
I'm on stock LFB (Indian Version).
I am on CWM-based Recovery c5.5.0.4
nodstuff said:
Yes, that's it.
First type "adb devices" (no" ")
If you get a long serial number then adb is set up on your computer but I doubt it seeing as you are asking how to boot into recovery.
Click to expand...
Click to collapse
I get adb is not a recognized internal or external command.
I also deleted dalvik cache; but it didn't help
eggman89 said:
I get adb is not a recognized internal or external command.
I also deleted dalvik cache; but it didn't help
Click to expand...
Click to collapse
Get me a build.prop from that firmware and I'll make you a zip you can flash in cwm.
You'll find it in the system folder.
Sent from my GT-I9300 using xda premium
nodstuff said:
Get me a build.prop from that firmware and I'll make you a zip you can flash in cwm.
You'll find it in the system folder.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I'm unable to access filesystem
Let me ask someone?
eggman89 said:
I'm unable to access filesystem
Let me ask someone?
Click to expand...
Click to collapse
Download another one from samfirmware.com
I'm not downloading it for you.
Sent from my GT-I9300 using xda premium
nodstuff said:
Download another one from samfirmware.com
I'm not downloading it for you.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Yes. I'm already downloading it. It's about 800mb and it'll take about 36minutes more.
Once I get that I'll provide it to you.
Thanks a lot for the help
But how will I push the build.prop ?
nodstuff said:
Download another one from samfirmware.com
I'm not downloading it for you.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
he needs adb to push the zip to his mobile first.
bala_gamer said:
he needs adb to push the zip to his mobile first.
Click to expand...
Click to collapse
How do I get adb?
eggman89 said:
Yes. I'm already downloading it. It's about 800mb and it'll take about 36minutes more.
Once I get that I'll provide it to you.
Thanks a lot for the help
But how will I push the build.prop ?
Click to expand...
Click to collapse
man if you are downloading the full rom, better flash it via odin . job done. almost all the stock roms are non wipe
How can we delete contents of a folder from update-script?
I want to delete contents of /system/usr/semc VIA UPDATE-SCRIPT ONLY!
Should i use "format /system/usr/semc" ??
Nope you can only format block devices and mount points.
Use the delete_ files option,
Look at this as an example
https://www.box.com/shared/704c38e0363828792ac2
Sent from my LT30p using Tapatalk 2
mpiekp said:
Nope you can only format block devices and mount points.
Use the delete_ files option,
Look at this as an example
https://www.box.com/shared/704c38e0363828792ac2
Sent from my LT30p using Tapatalk 2
Click to expand...
Click to collapse
Got it! THANX A LOT!!
What is this?
These are pre-rooted Stock ROM Base's for Developer to use to create modified stock ROMs or for the average Joe to restore their device's to working order if they are stuck in a bootloop. You must have an unlocked bootloader and a working Custom Recovery to use this.
Downloads:
T-Mobile / Retail US - 139.11.6 - Odex ***Tested, will not go past the boot logo.
Instructions:
Put the .zip on your internal storage.
Boot up to your Custom Recovery of choice (example: Clockworkmod Recovery).
Make a complete backup of your device using the Custom Recovery, and store that backup on a computer or alternative storage.
Wipe data using the Custom Recovery.
Mount system using the Custom Recovery.
Format system using the Custom Recovery.
Install the .zip from your internal storage using the Custom Recovery.
Reboot and enjoy! (If it asks to disable recovery install, tell it not to.)
Thanks:
My testers.
The Firmware Team.
mhous33 for the base script/binary for the RAZR M DST ROM.
I'll try to get some more bases up since we now have the means to install them and have them working correctly.
Amazing!
Thanks alot man. Never hurts to have an extra backup on my Google Drive or something should the worst happen.
Flashing in 15 minutes or so, when it's done downloading.
THANK YOU for this!
I'll need the /tmp/recovery.log after the flash if anyone could provide it
Something isn't going right so I'll need it to see what isn't.
Sent from my SGH-M919 using Tapatalk 2
mattlgroff said:
I'll need the /tmp/recovery.log after the flash if anyone could provide it
Something isn't going right so I'll need it to see what isn't.
Sent from my SGH-M919 using Tapatalk 2
Click to expand...
Click to collapse
It's not booting, so I can't retrieve the file you need. Adb won't detect the device
Gonna have to restore my backup.
[edit] actually ADB is seeing it once I go to recovery... how do I retrieve the file you need?
figured it out, here is the file you requested: https://www.dropbox.com/sh/l2s290vdcokf38i/Ej6iIe2dqK
Extracted using adb while phone was in recovery, after flashing your file. Have to restore now =P
Thanks! Working on it.
Sent from my SGH-M919 using Tapatalk 2
mattlgroff said:
Thanks! Working on it.
Sent from my SGH-M919 using Tapatalk 2
Click to expand...
Click to collapse
Cheers. I can test the revised ROM whenever it's ready =)
Thanks again for your troubles, this will be the stepping stone all the ROM Cooks have been waiting for!
scorpion667 said:
Cheers. I can test the revised ROM whenever it's ready =)
Thanks again for your troubles, this will be the stepping stone all the ROM Cooks have been waiting for!
Click to expand...
Click to collapse
Updated the file, same link as OP.
I'll probably need the /tmp/recovery.log again if it fails.
Code:
adb pull /tmp/recovery.log
Thanks
mattlgroff said:
Updated the file, same link as OP.
I'll probably need the /tmp/recovery.log again if it fails.
Code:
adb pull /tmp/recovery.log
Thanks
Click to expand...
Click to collapse
On it. download eta 20 mins
No luck. Uploaded the new recovery.log https://www.dropbox.com/sh/l2s290vdcokf38i/Ej6iIe2dqK
Let me know if you need any other files/logs off the phone.
would a copy of my nandroid backup help you at all?
[Breakthrough?] After flashing your ROM I did Advanced Restore and selected to ONLY restore System (from my backup) and I managed to boot! No FC or anything - seems to work perfect. I suppose that's where the problem lies? [sidenote: I always follow the instructions in OP for flashing your ROM i.e wipe data, mount system, format system, just thought I'd mention I'm not taking any shortcuts]
I dunno when I flash the ROM it does it a little too fast (under 5s?)... faster than it took my N4 to flash a 96MB Rom lol. I wonder if it's writing to system at all.
It did that for me on the first rom, I don't know if Matt put something in the build prop to differentiate it from the stock rom
Sent on my Moto X
scorpion667 said:
On it. download eta 20 mins
No luck. Uploaded the new recovery.log https://www.dropbox.com/sh/l2s290vdcokf38i/Ej6iIe2dqK
Let me know if you need any other files/logs off the phone.
would a copy of my nandroid backup help you at all?
[Breakthrough?] After flashing your ROM I did Advanced Restore and selected to ONLY restore System (from my backup) and I managed to boot! No FC or anything - seems to work perfect. I suppose that's where the problem lies? [sidenote: I always follow the instructions in OP for flashing your ROM i.e wipe data, mount system, format system, just thought I'd mention I'm not taking any shortcuts]
I dunno when I flash the ROM it does it a little too fast (under 5s?)... faster than it took my N4 to flash a 96MB Rom lol. I wonder if it's writing to system at all.
Click to expand...
Click to collapse
Sounds like its not flashing to system at all
Shame the log isn't saying what is wrong with the ROM zip. Heck its not even showing it attempting to install the zip at all!
No sense.
Sent from my SGH-M919 using Tapatalk 2
Could it be a recovery issue? The updater script looks way different than what I usually see, normally the system is formated and flashed , sym links, permissions and finally the kernel is flashed
Sent from my A2109A using Tapatalk 4
flashallthetime said:
Could it be a recovery issue? The updater script looks way different than what I usually see, normally the system is formated and flashed , sym links, permissions and finally the kernel is flashed
Sent from my A2109A using Tapatalk 4
Click to expand...
Click to collapse
If Superuser.zip flashes its the ROM.zip as the issue.
Sent from my SGH-M919 using Tapatalk 2
New updater script?
There's missing files also meta-inf folder?
Sent from my A2109A using Tapatalk 4
flashallthetime said:
New updater script?
There's missing files also meta-inf folder?
Sent from my A2109A using Tapatalk 4
Click to expand...
Click to collapse
Once an OTA update comes out for any Moto X variant we'll have a much better idea of the META-INF folder as a whole. In the meantime everyone feel free to keep playing with it to try to get it to work right. Making small updater-script changes to re-upload the entire ROM.zip is a huge pain. Soon enough we'll have the Dev Edition and more Developers will be joining us to get everything squared away.
Thanks testers!
What is the filesystem it (Moto X)?
Jovistyle said:
What is the filesystem it (Moto X)?
Click to expand...
Click to collapse
Code:
# mount point fstype device [device2] [length=]
/boot emmc /dev/block/platform/msm_sdcc.1/by-name/boot
/cache ext4 /dev/block/platform/msm_sdcc.1/by-name/cache
/recovery emmc /dev/block/platform/msm_sdcc.1/by-name/recovery
/sdcard datamedia /dev/null
/data f2fs /dev/block/platform/msm_sdcc.1/by-name/userdata
/system ext4 /dev/block/platform/msm_sdcc.1/by-name/system
/modem ext4 /dev/block/platform/msm_sdcc.1/by-name/modem
/customize ext4 /dev/block/platform/msm_sdcc.1/by-name/customize
These,
seems pretty solid my co-worker tried it an seems great now
BLKWIDOW said:
seems pretty solid my co-worker tried it an seems great now
Click to expand...
Click to collapse
Wait, so it works now?
Sent from my XT1058 using Tapatalk 2
Is it deodex? No biggy if its not. Download link? Fantastic, getting flashing widthdrawls, shaking and i can't sleep at night
Sent on my Moto X