Hi everyone,
I just did a clean install of omega v5.0 on my galaxy s4 (international version i9505). I've been playing around with the ViPER4Android mod and I've followed the following instructions:
1. Extract and copy ViPER4Android_FX/XHiFi.apk to /system/app/*here*
2. Change apk permission to rw-r-r (644). Reboot.
3. Run FX/XHiFi app from drawer, allow root access.
4. When driver installation prompt, choose Yes to "Install/Update".
5. Choose correct CPU Type. (Refer CPU Driver List)
6. After installation done, Reboot device.
7. If you want use only V4A, follow option1. If you want other existing effects to work, follow option2.
--->>Option1.
-----------8. Choose V4A(either fx or xhifi) in sound settings > music effects (Don't worry, both fx and xhifi will run together.)
-----------9. Make sure in V4A(both fx and xhifi), in menu option, FX Compatible Mode is set to Normal Mode.
-----------10. Download IRS and extract the .irs files to <storage>/ViPER4Android/Kernel/*here*
-----------11. Enjoy.
--->>Option2.
-----------8. Open up both V4A(both fx and xhifi), in menu option, FX Compatible Mode set to Compatible Mode.
-----------9. Download IRS and extract the .irs files to <storage>/ViPER4Android/Kernel/*here*
-----------10. Enjoy.
0. MAKE SURE YOU HAVE CHOSE THE CORRECT DRIVER. Refer OP.
0. MAKE SURE YOU HAVE BUSYBOX INSTALLED
1. Uninstall, reboot. Reinstall, Choose correct driver, reboot.
2. Don't use compatible mode yet, go to sound settings>music effects> and choose v4a(either fx or xhifi). Test.
3. If not working, switch to compatible mode, reboot, go to sound settings>music effects> and select previous effect. Test.
4. If not working, activate safe mode, reboot. Test.
5. If still not working, check
None of the instructions I followed above worked. Also, instead of moving the apk to system/app, I also tried installing as a normal apk and following the rest of the instructions and there has been no sound effect at all. Is there anything I'm missing out? Could anyone that managed to install v4a on the i9505 share with me how you got it to work?
Thanks in advance.
I've had a similar problem but with a Verizon S4. I've installed the apk normally, I've moved it to the /system/app folder and set the permissions accordingly, downloaded the correct drivers, etc. Close, but no cigar.
mrq701 said:
Hi everyone,
I just did a clean install of omega v5.0 on my galaxy s4 (international version i9505). I've been playing around with the ViPER4Android mod and I've followed the following instructions:
1. Extract and copy ViPER4Android_FX/XHiFi.apk to /system/app/*here*
2. Change apk permission to rw-r-r (644). Reboot.
3. Run FX/XHiFi app from drawer, allow root access.
4. When driver installation prompt, choose Yes to "Install/Update".
5. Choose correct CPU Type. (Refer CPU Driver List)
6. After installation done, Reboot device.
7. If you want use only V4A, follow option1. If you want other existing effects to work, follow option2.
--->>Option1.
-----------8. Choose V4A(either fx or xhifi) in sound settings > music effects (Don't worry, both fx and xhifi will run together.)
-----------9. Make sure in V4A(both fx and xhifi), in menu option, FX Compatible Mode is set to Normal Mode.
-----------10. Download IRS and extract the .irs files to <storage>/ViPER4Android/Kernel/*here*
-----------11. Enjoy.
--->>Option2.
-----------8. Open up both V4A(both fx and xhifi), in menu option, FX Compatible Mode set to Compatible Mode.
-----------9. Download IRS and extract the .irs files to <storage>/ViPER4Android/Kernel/*here*
-----------10. Enjoy.
0. MAKE SURE YOU HAVE CHOSE THE CORRECT DRIVER. Refer OP.
0. MAKE SURE YOU HAVE BUSYBOX INSTALLED
1. Uninstall, reboot. Reinstall, Choose correct driver, reboot.
2. Don't use compatible mode yet, go to sound settings>music effects> and choose v4a(either fx or xhifi). Test.
3. If not working, switch to compatible mode, reboot, go to sound settings>music effects> and select previous effect. Test.
4. If not working, activate safe mode, reboot. Test.
5. If still not working, check
None of the instructions I followed above worked. Also, instead of moving the apk to system/app, I also tried installing as a normal apk and following the rest of the instructions and there has been no sound effect at all. Is there anything I'm missing out? Could anyone that managed to install v4a on the i9505 share with me how you got it to work?
Thanks in advance.
Click to expand...
Click to collapse
im having the same issue - follow this thread ...some users are helping me out - - - http://forum.xda-developers.com/showthread.php?p=42958622\
That worked for me. Thanks a ton, mate.
Sent from my SCH-I545
Related
im looking for a screen dimmer mod like the one that was being used in Homebase. i know there are some market apps like screen dimmer but these are not the same. the mod im talking about lowers the minimum screen brightness by lowering the current being delivered to the backlight itself. there's an old thread about it here http://forum.xda-developers.com/showthread.php?t=1245332&highlight=manual
i havent been able to get it to work on wetdream. ive tried both pushing the framework apk with adb and manually editing the files with apk manager but the first caused a bootloop and the latter a bunch of google FC.
anyone know if there is a working mod(or how to get this one working) to set the minimum screen brightness lower?
i got it working with gingermod, for some reason it didnt work on wetdream. if anyone is interested here what you do
1. Download APK manager
2. Grab framework-res.apk from your phone under \system\framework\ (you can use root explorer or adb push) and place it in the "place-apk-here-for-modding" folder
3. Run Script.bat and select option 9
4. go to projects\framework-res.apk\res\values\arrays.xml and edit your values with the ones roger posted in my link above
5. Once edited, compile the apk using option 11
6. Is this a system apk. Ans: y
7. Qn: Aside from the signatures...least. Ans: y
8. Prompt: In the apk manager folder u'll find a keep folder..... done then press enter on this script. Press any key to continue . . . go to "keep" folder and delete resources.arsc and then press any key
once that is done you can also change the current that is drawn from the screen from the default 25mA to 5mA by using terminal or adb shell (this mod will help with battery life)
heres the command
su
cd sys/bus/i2c/drivers/lm3532/0-0038/leds/lcd-backlight
echo 17 00 > registers
reboot
for a more detailed explanation on what you are doing with these commands check out roger's thread in the above post.
Don't mistaken me as the creator....
original thread :- http://forum.xda-developers.com/showpost.php?p=39156703&postcount=1
This is a sound mod for enhancing the sound effects.....
. Extract and copy ViPER4Android_FX/XHiFi.apk to /system/app/*here*
2. Change apk permission to rw-r-r (644). Reboot.
3. Run FX/XHiFi app from drawer, allow root access.
4. When driver installation prompt, choose Yes to "Install/Update".
5. Choose correct CPU Type. (Refer CPU Driver List)
6. After installation done, Reboot device.
7. If you want use only V4A, follow option1. If you want other existing effects to work, follow option2.
--->>Option1.
-----------8. Choose V4A(either fx or xhifi) in sound settings > music effects (Don't worry, both fx and xhifi will run together.)
-----------9. Make sure in V4A(both fx and xhifi), in menu option, FX Compatible Mode is set to Normal Mode.
-----------10. Download IRS and extract the .irs files to <storage>/ViPER4Android/Kernel/*here*
-----------11. Enjoy.
--->>Option2.
-----------8. Open up both V4A(both fx and xhifi), in menu option, FX Compatible Mode set to Compatible Mode.
-----------9. Download IRS and extract the .irs files to <storage>/ViPER4Android/Kernel/*here*
-----------10. Enjoy.
For More information visit the original thread....
Download Links:::::::::::
Viper4Android FX - https://www.dropbox.com/s/5hhan7fhgr7xpgd/ViPER4Android FX.zip
Viper4Android XHIFI - https://www.dropbox.com/s/nstq50gapaeie5x/ViPER4Android XHiFi.zip
What is our CHD CPU type, any one knows?
Sent from my A116 using xda premium
j_svas said:
What is our CHD CPU type, any one knows?
Sent from my A116 using xda premium
Click to expand...
Click to collapse
Its basically a7 architecture ..
but for viper i would suggest to go with a8 with neon (basically for devices with 1.2 Ghz....
thanks
Strider_RD said:
Its basically a7 architecture ..
but for viper i would suggest to go with a8 with neon (basically for devices with 1.2 Ghz....
Click to expand...
Click to collapse
thanks buddy but i was wanderind will it create problem if we select a8 or will work without any problem...
No buddy it won't create any problem.. u will get awesome sound quality..!
I also suggest u go through some of the profiles provided by the original uploader of viper ..
Try out of the preset posted by him..!
cheers..!
I installed both... FX as well as xHifi...
so do i have to make changes in both...??
please
VatsalRaj said:
I installed both... FX as well as xHifi...
so do i have to make changes in both...??
Click to expand...
Click to collapse
i don't understand you are referring to which changes buddy?
borichamehul5 said:
i don't understand you are referring to which changes buddy?
Click to expand...
Click to collapse
offcourse the sound effects....
the app for what it is meant...
and when the viper in speakers is enabled..my ringtone doesn't gets played...!
whats d problem?
This is my profile for phone speaker, it kinda increased my speaker volume so thought I'd share it with everyone
FX:
1. Master Power: ✔
2. FIREqualizer: ✘
3. Convolver: ✔
(i) Impulse Response: ZEN X-Fi Crystalizer-Only-Mid.irs
4. Reverberation: ✔
(i) Room Size: 25m2
(ii) Sound Field: 5m
(iii) Damping Factor: 100 percent
(iv) Wet Signal: 10 percent
(v) Dry Signal: 100 percent
5. eXtra-Loud: ✔
(i) Effect Strength: Moderate
(ii) Max Gain: 4.0 dB
(iii) Max Output: 0.0 dB
9. Master Gate (Limiter): ✔
(i) Output Gain: 6.0 dB
(ii) Limit Threshold: 0.0 dB
how to totally remove these both apps??
titanium
VatsalRaj said:
how to totally remove these both apps??
Click to expand...
Click to collapse
from titanium backup uninstall these apps.
borichamehul5 said:
from titanium backup uninstall these apps.
Click to expand...
Click to collapse
and what about the drivers that have been installed in system?
don't know
VatsalRaj said:
and what about the drivers that have been installed in system?
Click to expand...
Click to collapse
I know this way only might be but don't know
:good:
borichamehul5 said:
I know this way only might be but don't know
Click to expand...
Click to collapse
VatsalRaj said:
how to totally remove these both apps??
Click to expand...
Click to collapse
Uninstallation
1. Open up V4A(both fx and xhifi), go in menu option and choose uninstall driver.
2. After that, uninstall V4A(both fx and xhifi) apk (root/system/app)
3. Reboot. Done.
leo.riv said:
Uninstallation
1. Open up V4A(both fx and xhifi), go in menu option and choose uninstall driver.
2. After that, uninstall V4A(both fx and xhifi) apk (root/system/app)
3. Reboot. Done.
Click to expand...
Click to collapse
i uninstall both app drivers...
also removed app with titanium...bt still variation there in music player...
installed Viper4Android FX and xhifi both, works as charm. My phone's sound is now atleast 10x better that before. Thank you
Which is better? Editing sound on engineering mode for mtk or installing viper?
Sent from my MyPhone A919i Duo using XDA Premium 4 mobile app
Is it possible to use only viper FX ? which player supports best ?
schizophrenics said:
Which is better? Editing sound on engineering mode for mtk or installing viper?
Click to expand...
Click to collapse
For good quality in earphones - Viper is the best. For increase sound volume - editing parameters in engimode.
So I know many of you enjoyed using this amazing mod in the past and something in our builds caused it to break after 4.3.1 roms started rolling out. Look no further as i have a fix for you that is guaranteed to work again.
Step 1.) For the first step you will need to edit your build.prop file found in /system folder. Personally i use Rom Toolbox lite (found here https://play.google.com/store/apps/details?id=com.jrummy.liberty.toolbox&hl=en) as it comes with a built in build.prop editor and root browser and it is free. Some of these edits may already be in your build.prop so check the edits posted below to see if they are already there or just need a slight change before just adding it as having 2 of the same edits with a different value may conflict with eachother
the edits are:
lpa.decode=false
tunnel.decode=false
tunnel.audiovideo.decode=false
it may ask to reboot on some or just one of these but we can skip rebooting for now. once set we can now move forward.
Before starting the next step MAKE SURE YOU REMOVE AND UNINSTALL DSP MANAGER. you can do so via app manager in ROM Toolbox Lite.
Step 2.) Now we download viper4android according to your rom version. For 4.3.1 roms get this one https://play.google.com/store/apps/details?id=com.vipercn.viper4android4x&hl=en
Once downloaded and installed you will now have to copy and paste it from /data/app to system/app. When it finishes copying over delete the app from /data/app as it will not work otherwise. Make sure permissions are properly set to rw-r--r-- or 0644 in numerical terms. Rom Toolbox will make this whole process easier and faster.
At this point you will now reboot your device for the next step
Step 3.) Once rebooted open the app and it will have you install its driver Select cortex A8 option (3rd one down). It will ask to reboot but dont do it yet. Last thing to do is while in viper4android app hit the sttings button and you will see a long list of things. Select FX Compatible Mode and switch from Normal to Compatible mode and now you reboot for it to take effect and work.
After this you are all set to start setting your sound otions in viper4android and enjoy
I Give great Thanks to:
@zhuhang for making this great app/mod
@jrummy for creating rom toolbox (another amazing app)
@Bradl79 for the build.prop idea
@bbgreen for confirming this works
And Anyone else i may have missed
If i have PM me and ill gladly add them in
So far for the headset option i have the following enabled and set
Under MASTER POWER:
Enable V4A-FX is checked and powered on
Under FIREQUALIZER:
Enabled is checked and powered on
Select Preset is set to Rock
Under DYNAMIC SYSTEM:
Enable is checked
Select Listening Device is set to Common Earphone (v2)
Select Dynamic Bass is set to 2 percent
Under FIDELITY CONTROL:
Enable ViPER Bass is checked
Select Bass Mode is set to Natural Bass
Select Bass Frequency is set to 100Hz
Enable ViPER Clarity is checked
Select Clarity Mode is set to XHiFi
Select Clarity is set to 3.5 db
thats all i have set for now but i'm using skullkandy heaphones with this setup will vary for other headphone brands and models. with this setup it gets very loud and clear as well as amazing bass so dont damage your eardrums lol
Other aidio profiles can be found here by scrolling down to second post http://forum.xda-developers.com/showthread.php?t=2324454&highlight=viper4android
Thanks @sixcarnage for posting that as well
REV3NT3CH said:
So I know many of you enjoyed using this amazing mod in the past and something in our builds caused it to break after 4.3.1 roms started rolling out. Look no further as i have a fix for you that is guaranteed to work again.
Step 1.) For the first step you will need to edit your build.prop file found in /system folder. Personally i use Rom Toolbox lite (found here https://play.google.com/store/apps/details?id=com.jrummy.liberty.toolbox&hl=en) as it comes with a built in build.prop editor and root browser and it is free. Some of these edits may already be in your build.prop so check the edits posted below to see if they are already there or just need a slight change before just adding it as having 2 of the same edits with a different value may conflict with eachother
the edits are:
lpa.decode=false
tunnel.decode=false
tunnel.audiovideo.decode=false
it may ask to reboot on some or just one of these but we can skip rebooting for now. once set we can now move forward.
Before starting the next step MAKE SURE YOU REMOVE AND UNINSTALL DSP MANAGER. you can do so via app manager in ROM Toolbox Lite.
Step 2.) Now we download viper4android according to your rom version. For 4.3.1 roms get this one https://play.google.com/store/apps/details?id=com.vipercn.viper4android4x&hl=en
Once downloaded and installed you will now have to copy and paste it from /data/app to system/app. When it finishes copying over delete the app from /data/app as it will not work otherwise. Make sure permissions are properly set to rw-r--r-- or 0644 in numerical terms. Rom Toolbox will make this whole process easier and faster.
At this point you will now reboot your device for the next step
Step 3.) Once rebooted open the app and it will have you install its driver Select cortex A8 option (3rd one down). It will ask to reboot but dont do it yet. Last thing to do is while in viper4android app hit the sttings button and you will see a long list of things. Select FX Compatible Mode and switch from Normal to Compatible mode and now you reboot for it to take effect and work.
After this you are all set to start setting your sound otions in viper4android and enjoy
I Give great Thanks to:
@zhuhang for making this great app/mod
@jrummy for creating rom toolbox (another amazing app)
@Bradl79 for the build.prop idea
@bbgreen for confirming this works
And Anyone else i may have missed
If i have PM me and ill gladly add them in
Click to expand...
Click to collapse
Been trying to get this to work for a while as well as you may recall from past comments. Sure this guide will produce a desired "universal" sound effect as before? I had no luck with SoundCloud getting processed by V4A after this. However, I may needed to retry steps verbatim on a fresh ROM install too as I had some other conflicting things to clean up along the way.
Idk about soundcloud...I does work like it did before in Apollo...my guess is that its directing to basic sound while using other apps or stuff like soundcloud
Sent from my ADR6425LVW using xda app-developers app
Nice find Rev! Works great.
Thanks for the write up I just tried it. Unfortunately it only seems to work with Apollo. When I try it with Power Amp or Pandora it no longer works. On my old sense 4.0 ROM viper4android would modify those programs as well Ive tried the current version and the version off the play store with the same results. Thanks for the write up though very easy to follow.
Please post any questions about Viper4Android here not just 4.3 ROMs.
Sent from my ADR6425LVW using Tapatalk
How To Bake Viper4Android into a ROM zip (BASED OFF OFF v.2322)
@REV3NT3CH Consider adding this to the thread (Not trying to hijack the thread) this may be super long
@PTuT @Chucktr you asked for a pm of how to bake v4a into a rom, i decided to post it here for everyone
If you dont want to download the apk and install the apk/drivers you can merge the drivers and app from your pc.
ill probably end up making a script for this but right now i don't mind copying it into new builds for now
Latest apk - http://www.mediafire.com/download/z1mqg58hz1sfais/ViPER4Android_FX_v2322.zip
driver - http://d-h.st/xHh
driver config - http://d-h.st/axM
i usually use 7zip for archive viewer ect..
1. Open the rom zip in 7zip or whatever you choose to use
2. In 7zip navigate to "system/priv-app/" and drag/drop the apk you downloaded into the 7zip window.
3. In 7zip back out of the "prive-app" folder and navigate to "system/lib/soundfx/" and drag/drop libv4a_fx_ics.so you downloaded into the 7zip window
4. in 7zip back out of "soundfx" & "lib" and navigate to "system/ect/" and drag/drop audio_effects.conf you downloaded into the 7zip window
Exit 7zip, Now you have the app and driver baked in the rom :good:
Now what happens when any of this stuff gets update?.... well
Drag/drop the latest apk to priv-app (obviously lol)
The Driver can be pulled from the inside the apk in the assets folder using 7zip. Use any of the drivers containing "libv4a_fx_ics_NEON" based on the quality of the driver they are named different but i use libv4a_fx_ics_NEON_HQ, rename it to libv4a_fx_ics.so and copy it to the rom zip
We cant use the JB drivers on jb or kk, only ics
i dont know how often audio_effects.conf gets updated but just add the fallowing to the audio_effects.conf in the rom zip (ONLY IF NEEDED) the download link above should be good fine good for a while:
Line 9 to 11 :
v4a_fx {
path /system/lib/soundfx/libv4a_fx_ics.so
}
Line 69 to 72:
v4a_standard_fx {
library v4a_fx
uuid 41d3c987-e6cf-11e3-a88a-11aba5d5c51b
}
all of this is based off of v.2322 so i cannot guarantee this to work within the next year or so ect... if someone updated something
bunchies said:
@REV3NT3CH Consider adding this to the thread (Not trying to hijack the thread) this may be super long
Click to expand...
Click to collapse
thanks for this...will deffinately be very useful and will do...your not hijacking bud your contributing to a very useful cause... you tha man @bunchies
This took me some hours this evening and a lot of trial and error but I was able to get it working. Note: if you are novice at playing with system files, don't bother to try this. It's not for the faint at heart. I can't provide support. You will also need Script Manger so you can fix permissions after placing the files. You must manually do all of this since we can't flash the zips! Make sure to Freeze the Sound Alive apk with TB also so there are no other music effects apps. Here's what I had to do:
1. Follow the instructions at this post first, extracting and placing files. Just don't reboot yet (thanks @TiTiB): http://forum.xda-developers.com/showpost.php?p=62365948&postcount=37
2. Download the two files mentioned here in this thread. You only need the audio policy script from the Lolliviper zip file to place in the system folder. Place the others from the ViPER4Android-supolicy.zip where needed: http://forum.xda-developers.com/galaxy-tab-s/general/how-to-installing-viper4android-v4a-t3136025
3. Take the latest Viper apk and place it in the system/priv-app folder.
4. Remember, make sure set all the needed permissions as you go along for ALL files above or none of this will work!
5. Reboot.
6. Open the Viper app, select the driver you want. Reboot.
7. If using Poweramp, you may or may not see the MusicFX control button whether you have it selected in advanced settings or not. I did not see it but it made no difference. Open the Viper app, turn on the settings and start playing music. Voila, it works! Works on my speaker too. Apparently permissive kernel isn't essential to make this work and that is the beauty of all this., because you can not use SElinux mode app on this kernel as some of you may know.
Have fun and good luck, at least you might be able to do this in much shorter time than I did.
One other thing I have found. You must set the scripts in system/su.d to run on boot with script manager so Viper will run after each reboot.
You can also get it to work by the following.
Install xposed
Install Wanam exposed module
In Wanam, under Security hacks
Disable Knox notification (I manually remove Knox)
Disable SEAndroid (changes to passive)
Install Viper4Android and update the driver
bishop0114 said:
You can also get it to work by the following.
Install xposed
Install Wanam exposed module
In Wanam, under Security hacks
Disable Knox notification (I manually remove Knox)
Disable SEAndroid (changes to passive)
Install Viper4Android and update the driver
Click to expand...
Click to collapse
I could not get Xposed installed after rooting, tried the latest apk, etc. I read on that thread Xposed has issues with stock LP Samsung ROMs so I just forgot about it. I could have tried placing the files in the flashable zip manually but it didn't seem worth the risk. I'm glad you got it going because that way sounds faster.
Hi Guys this is a tutorial on how to install Viper4Android on J5 and set it up for 100% working. Follow the instruction and you will be able to install Viper4Android on your J5.
After trying unsuccessfully for many times I finally had working V4A. Many of you may be facing the same situation, so just want to help those people.
INTRODUCTION:
What is Viper4Android?
Viper4Android is audio mod which can be installed on rooted Android devices to enhance the audio quality of the device. This beautiful mod delivers a great audio output with the default settings but you can fine tune it further to optimize the audio output to your liking.
ViPER’s Audio is founded by Euphy Wong (known as ViPER520). ViPER’s Audio has been a popular audio mod in China. Co-founder Jasper Loo (known as zhuhang) extended its popularity globally through xda-developers forum. It has now gained fame and stand its ground in the audio mod field. Now it runs on two platforms one is Android and second is windows and it is one of the most popular sound mod among audiophiles.
ViPER’s Audio is an audio enhancing software to provide everyone with better audio experiences in various platforms such as smartphones and PCs. It is the first ever mod which has implemented convolver.
The main feature of V4A is convolver.
So what is Convolver?
When an IRS is loaded, via convolver V4A will process the sound to show the same exact characteristics as the loaded sample. Through Convolution, samples with effects such as equalizer, surround, reverberation, tube etc can be simulated.
Installing V4A
Requirements:
1) Rooted android phone (In our case J5)
2) Busybox installed
3) File Explorer (Root Explorer)
Procedure:
1) Download the files from the link given below. ( I have provided all the necessary files on a zip file)
2) Extract the zip file. You will get some apk files and audio_effects.conf file.
3) Now install Root explorer and Selinux mode changer apk file as normal installation.
4) Now open root explorer and navigate to system/priv-app and copy paste Viper4Android apk there.
5) Now again navigate to system/etc. There you will find audio_effects.conf file. Rename it to audio_effects.conf.bak Now copy paste audio_effects.conf file that you downloaded to system/etc.
6) Now you need to set permission for both Viper4android apk which is at system/priv-app and audio_effects.conf file which is at system/etc to rw-r--r--. This is very important. Search in google if you don’t know to set permission. Than reboot your device.
7) After your device reboots you will see V4A installed. Open it and it will ask you to install driver. Give permission to install driver as well as root access. After the driver is installed it will ask you to reboot the device. Close V4A and open Selinux mode changer app and change the mode to permissive. Reboot your device.
8) Once your device is rebooted open V4A and enable it. Congratulation you have successfully installed Viper4Android . Enjoy the great music experience. Now you can change the Viper settings or fine tune it according to your liking.
Downloads:
https://drive.google.com/open?id=0B77gkzdKIaRSZkdtRWFWZzJhN1k
http://vipersaudio.com/blog/?page_id=48
You can find samples and profiles on xdadevlopers
http://forum.xda-developers.com/showthread.php?t=2191223
Note: I wrote this tutorial to help those who don’t know to install Viper4Android on J5. I will not be responsible for any damage to your device. Do it at your own risk. Follow the instruction properly and you will not face any problem.
Finally do comment if it helped or not.
hey man thank you so much but dont work for me i do all thing you say string by string but at the end i go to driver status and it show the driver is not installed and unsuport and when i played a sound then run the viper the sound had been auto stop.
and show the notfication can not play the music. i have j500F.rooted and busybox installed. sorry for bad english ?
just this viper work in my j5 ViPER4Android_XHiFi_Final_v2102-1
fully worked whitout any lag but it is not the right thing i want.
can any body help me how can i install last version of viper4android fx in my galaxy j5(j500f) with officcal marshmallow. and last super su installed & last busy box to.
M*Deylamani said:
just this viper work in my j5 ViPER4Android_XHiFi_Final_v2102-1
fully worked whitout any lag but it is not the right thing i want.
can any body help me how can i install last version of viper4android fx in my galaxy j5(j500f) with officcal marshmallow. and last super su installed & last busy box to.
Click to expand...
Click to collapse
Have a look at the downloads that come with zoniks performance Rom.
It's worth contacting him to see if u can use them on your Rom or if he could make you a copy for your Rom
Sent from my Galaxy J5 using XDA Labs
hi evry body
if you have j5 (j500F) with official marshmallow and need to have the last version of viper4android on your phone whitout install custom rom (just viper)
1. install TWRP 3.0.2-0 touch recovery
2. root the device ( with last super su )(search the root thread)
3. install last busybox
4. flash the SUPERMOD SOUND in this thread([ROM 6.0.1] PERFORMANCE BOOST SPEED v8.1 FOR GALAXY J5 2015 [UP: 15/10/2016] by By Zonik) very very thank to him and any body to create that
5. go to the viper app allow super su to acsess and install the driver
6. reboat
very very thank to johnhux7 ❤
M*Deylamani said:
hi evry body
if you have j5 (j500F) with official marshmallow and need to have the last version of viper4android on your phone whitout install custom rom (just viper)
1. install TWRP 3.0.2-0 touch recovery
2. root the device ( with last super su )(search the root thread)
3. install last busybox
4. flash the SUPERMOD SOUND in this thread([ROM 6.0.1] PERFORMANCE BOOST SPEED v8.1 FOR GALAXY J5 2015 [UP: 15/10/2016] by By Zonik) very very thank to him and any body to create that
5. go to the viper app allow super su to acsess and install the driver
6. reboat
very very thank to johnhux7 ❤
Click to expand...
Click to collapse
Hey man, I'm pleased that worked out for you. It's cool hey !
Sent from my Galaxy J5 using XDA Labs
Do you know if this works with Stock Marshmallow on J510FN? Sat for eight hours yesterday with all methods and just want to check if anyone has tried it with this?
rjrulz007 said:
Hi Guys this is a tutorial on how to install Viper4Android on J5 and set it up for 100% working. Follow the instruction and you will be able to install Viper4Android on your J5.
After trying unsuccessfully for many times I finally had working V4A. Many of you may be facing the same situation, so just want to help those people.
INTRODUCTION:
What is Viper4Android?
Viper4Android is audio mod which can be installed on rooted Android devices to enhance the audio quality of the device. This beautiful mod delivers a great audio output with the default settings but you can fine tune it further to optimize the audio output to your liking.
ViPER’s Audio is founded by Euphy Wong (known as ViPER520). ViPER’s Audio has been a popular audio mod in China. Co-founder Jasper Loo (known as zhuhang) extended its popularity globally through xda-developers forum. It has now gained fame and stand its ground in the audio mod field. Now it runs on two platforms one is Android and second is windows and it is one of the most popular sound mod among audiophiles.
ViPER’s Audio is an audio enhancing software to provide everyone with better audio experiences in various platforms such as smartphones and PCs. It is the first ever mod which has implemented convolver.
The main feature of V4A is convolver.
So what is Convolver?
When an IRS is loaded, via convolver V4A will process the sound to show the same exact characteristics as the loaded sample. Through Convolution, samples with effects such as equalizer, surround, reverberation, tube etc can be simulated.
Installing V4A
Requirements:
1) Rooted android phone (In our case J5)
2) Busybox installed
3) File Explorer (Root Explorer)
Procedure:
1) Download the files from the link given below. ( I have provided all the necessary files on a zip file)
2) Extract the zip file. You will get some apk files and audio_effects.conf file.
3) Now install Root explorer and Selinux mode changer apk file as normal installation.
4) Now open root explorer and navigate to system/priv-app and copy paste Viper4Android apk there.
5) Now again navigate to system/etc. There you will find audio_effects.conf file. Rename it to audio_effects.conf.bak Now copy paste audio_effects.conf file that you downloaded to system/etc.
6) Now you need to set permission for both Viper4android apk which is at system/priv-app and audio_effects.conf file which is at system/etc to rw-r--r--. This is very important. Search in google if you don’t know to set permission. Than reboot your device.
7) After your device reboots you will see V4A installed. Open it and it will ask you to install driver. Give permission to install driver as well as root access. After the driver is installed it will ask you to reboot the device. Close V4A and open Selinux mode changer app and change the mode to permissive. Reboot your device.
8) Once your device is rebooted open V4A and enable it. Congratulation you have successfully installed Viper4Android . Enjoy the great music experience. Now you can change the Viper settings or fine tune it according to your liking.
Downloads:
https://drive.google.com/open?id=0B77gkzdKIaRSZkdtRWFWZzJhN1k
http://vipersaudio.com/blog/?page_id=48
You can find samples and profiles on xdadevlopers
http://forum.xda-developers.com/showthread.php?t=2191223
Note: I wrote this tutorial to help those who don’t know to install Viper4Android on J5. I will not be responsible for any damage to your device. Do it at your own risk. Follow the instruction properly and you will not face any problem.
Finally do comment if it helped or not.
Click to expand...
Click to collapse
There is easier method via Wallmam Xperia music patch
hi, guys, I'm recently trying to instal viper for android, but I get the root access but the audio driver did not installed, I'm using j510mn wind 6.0.1
A other way to install viper4android is through Magisk.
1. You need to unroot remove SuperSU root.
2. Download Magisk zip and flash in recovery.
3. Install Magisk manager on play store.
4. Install viper4android Magisk module and its apk.
serdotlinecho said:
1. You need to unroot remove SuperSU root.
.
Click to expand...
Click to collapse
How do you unroot removing SuperSU root ??
I have rooted my J5 (2015 6.0.1 Stock) with SuperSu flashed with recovery (SU binary installed in /su/bin/su).
Greetings.
jam66 said:
How do you unroot removing SuperSU root ??
I have rooted my J5 (2015 6.0.1 Stock) with SuperSu flashed with recovery (SU binary installed in /su/bin/su).
Greetings.
Click to expand...
Click to collapse
Choose full unroot in SuperSU settings.
serdotlinecho said:
Choose full unroot in SuperSU settings.
Click to expand...
Click to collapse
Thanks.
There are any problems if I already have installed busybox in /su/xbin/ (/su/xbin/busybox) ?
Funcionanod excelente en g570m j5 prime con android 6. Muchas gracias