Related
As per the title, device manager doesn't change when I plug the phone in, tried two different computers and two different cables, flashed the stock firmware back, and still nothing.
It charges when I plug it in and SOMETIMES brings up the MTP-Initialization logo thing, but never gets any further.
Is my GS2 goosed yet again?
Edit: Tried on my PS3 as well and still charges, but won't ask to mount the SD card or anything, so I'm back to my trusty HTC HD2, wondering whether I should sell the GS2 once it's repaired and get a Galaxy Nexus...
Hah, another HD2 veteran, it's like everyone from the HD2 forum is now here... even the devs. Anyway, may be a stupid question, but are you always trying with the same USB cable?
Disable usb debug mode
Sent from my GT-I9100 using xda premium
Tried two different cables as stated in my OP, and it doesn't matter whether USB Debugging is on or off. I'm taking it back to the service centre after work today, and I'm probably going to sell it after.
I've had the camera go.
I've had it not vibrating at all.
I've had problems with spots on the camera lens.
I think I'm going to put some money to the sale of it, and get a Galaxy Nexus, hopefully the built quality will be at least a little better...
Solution is in the phone
Dear All
Following are my observations and possible steps to
1. When the phone is upgraded to Android 2.3.4 and above (mine is 2.3.6) Kies stops recognizing the phones and USB connection / Serial port connections etc get reset on the phone
2. Even if proper drivers are there on the laptop (mine is Windows 7 64bit) they are not recognized
3. Device Manager shows "unknown device"
4. Updating the driver also does not result in any help
5. solution lies in the phone
a. key in the dialer *#7284#
b. it has 4 option there..
UART (MODEM/PDA)
USB (MODEM/PDA)
c. For USB. select the PDA.if it already selected to PDA. reselect it by select MODEM and then PDA again.. Only change the USB setting.. andthen press back. try reconnect (thanks to napi1 @ androidforums.com/samsung-galaxy-s2-international/447145-sgs2-kies-not-syncing-os-2-3-5-a.html#post3484588)
6. The Laptop will start recognizing the required drivers and install them
also
Phone is not recognized by laptop when it is in USB debug mode, MyPhoneExplorer does not recognize when it is not in Debug mode
Hope this helps
My setup
Samsung Galaxy S2 GTI9100G (not rooted)
Android 2.3.6 (upgraded on Dec 8th from Samsung link in the phone)
Windows 7 64 Bit
Dear All
Following are my observations and possible steps to
1. When the phone is upgraded to Android 2.3.4 and above (mine is 2.3.6) Kies stops recognizing the phones and USB connection / Serial port connections etc get reset on the phone
2. Even if proper drivers are there on the laptop (mine is Windows 7 64bit) they are not recognized
3. Device Manager shows "unknown device"
4. Updating the driver also does not result in any help
5. solution lies in the phone
a. key in the dialer *#7284#
b. it has 4 option there..
UART (MODEM/PDA)
USB (MODEM/PDA)
c. For USB. select the PDA.if it already selected to PDA. reselect it by select MODEM and then PDA again.. Only change the USB setting.. andthen press back. try reconnect (thanks to napi1 @ androidforums.com/samsung-galaxy-s2-international/447145-sgs2-kies-not-syncing-os-2-3-5-a.html#post3484588)
6. The Laptop will start recognizing the required drivers and install them
also
Phone is not recognized by laptop when it is in USB debug mode, MyPhoneExplorer does not recognize when it is not in Debug mode
Hope this helps
My setup
Samsung Galaxy S2 GTI9100G (not rooted)
Android 2.3.6 (upgraded on Dec 8th from Samsung link in the phone)
Windows 7 32 Bit
Thank you !!!
Unbelievable! Thank you soo Much!
Helps also on Mac 10.6.8
Thanks a lot mate..I was afraid that i'll have to take it to service center. This helped me.
thanks people!...even i had upgraded to 2.3.6 and usb mode just wouldnt work....
this solved that problem though..
Fantastic tip!
It worked! Now my S2 can be detected by the PC.
Thanks a million!
Doing a factory reset after backing up data will solve the problems.
Still Hasn't worked for me. I'm getting no USB function other than Charge. Its working as if the USB isn't plugged in at all.
Is there anyway of reinstalling the MTP application on the phone? When i find it through App manager its showing with no size and no options inside (clear data or clear cache)
Kies isn't working as far as the phone is concerned there is no USB connection at all.
I know ICS is coming within a few days for GS2 owners, will this clear the problem???
So frustrating.
Thanks in advance if anybody can help
SG2-Nick said:
Still Hasn't worked for me. I'm getting no USB function other than Charge. Its working as if the USB isn't plugged in at all.
Is there anyway of reinstalling the MTP application on the phone? When i find it through App manager its showing with no size and no options inside (clear data or clear cache)
Kies isn't working as far as the phone is concerned there is no USB connection at all.
I know ICS is coming within a few days for GS2 owners, will this clear the problem???
So frustrating.
Thanks in advance if anybody can help
Click to expand...
Click to collapse
same with mine. mine still doesnt work with the dialer *#7284# and with debugging off or on. ive unistalled and reinstalled the driver serveral times and nothing and this has happened to me on my hero and my sgs2 dozens of times, its so annoying =[. at one point i manged to get all but the usb storage drivers installed. what else can i do ???
Same problem
Same problem here, tried everything (to my knowledge). Someone told me it had to do with the battery overheating because I had use the charger from another phone. For about 2 days my phone would go on vibrate randomly and started the connection process (like a usb cable was connected). It could do that non stop for a few hours. Now that Im back to my original charger, it stoped, but still can't connect to my pc.
I tried on 3 diff PCs with diff version of windows...
I've tried everythin, debug mode on/off, reinstalled Kies, drivers, did factory reset, but nothing.. when i try to connect my SGSII to Kies, it writes "Current connection mode not supported by Kies".. I'm on Lite'ning rom v2.2..
If you're running a custom rom, why would you want to use Kies ? It's awful. There are so many other apps that have the same functionality as Kies (tho granted not one app that does everything Kies does) that work perfectly with custom roms.
Only reason to use Kies would be if you went back to stock because you wanted official ICS OTA or similar IMHO.
I did a backup with Kies, now my all contacts, sms, videos, music, calendar are in this f***in' backup file.. :| I have an awfull headache Or i can do a restore with another app, will it be compatible with Kies's backup file?
same problem. USB connection to PC will only charge. Recently updated to 2.3.6.
Tricky one.
----------EDIT---------
it worked ok after rebooting my PC. Must just be general crapiness.
Ashtwinks said:
Dear All
Following are my observations and possible steps to
1. When the phone is upgraded to Android 2.3.4 and above (mine is 2.3.6) Kies stops recognizing the phones and USB connection / Serial port connections etc get reset on the phone
2. Even if proper drivers are there on the laptop (mine is Windows 7 64bit) they are not recognized
3. Device Manager shows "unknown device"
4. Updating the driver also does not result in any help
5. solution lies in the phone
a. key in the dialer *#7284#
b. it has 4 option there..
UART (MODEM/PDA)
USB (MODEM/PDA)
c. For USB. select the PDA.if it already selected to PDA. reselect it by select MODEM and then PDA again.. Only change the USB setting.. andthen press back. try reconnect (thanks to napi1 @ androidforums.com/samsung-galaxy-s2-international/447145-sgs2-kies-not-syncing-os-2-3-5-a.html#post3484588)
6. The Laptop will start recognizing the required drivers and install them
also
Phone is not recognized by laptop when it is in USB debug mode, MyPhoneExplorer does not recognize when it is not in Debug mode
Hope this helps
My setup
Samsung Galaxy S2 GTI9100G (not rooted)
Android 2.3.6 (upgraded on Dec 8th from Samsung link in the phone)
Windows 7 64 Bit
Click to expand...
Click to collapse
Won't work on my samsung galaxy s2 (ICS 4.0.3) - windows Xp (sweet)
I just got a brand new Samsung SGH-i727 that I cannot get into Debug mode, which means that I'm bored with it already! I want to ROOT!! I can navigate to the setting, select the check box, and it remains checked, however, it won't indicate Debugging mode ( in the status bar, with the pop-up or otherwise when connected to the PC), and I cannot access ADB to root it! I am at a loss. I have scoured the forums, deleted and re-installed the drivers, deleted and allowed the device to re-install the drivers, used different USB cables, including the original, and a decent aftermarket, used different USB ports, used different PCs, (Two Win 7's, and one WinXP, all to no avail. I am upgrading from a Cappy, that was rooted on this machine, but for some reason, the 727 just doesn't want to work! Any suggestions?
Still cannot root! Somebody help me!
Hey all,
I have continued to try and play around with this, to no avail. I still cannot get into Debug mode. Anyone out there have any ideas?
Thanks!
You mean the debbuging mode you can set under settings development debugmode
I realy cant imagine why it is happening to you but a few weaks ago i had a similar problem
i solved it by simply restarting the phone
it won't display that your in debugging mode. If your skyrocket is running 2.3.6 then super one click wont work. the only method that works for rooting 2.3.6 is http://forum.xda-developers.com/showthread.php?t=1340526
hope this helps.
Hi guys!
I have a rooted international Galaxy S3 (i9300) phone with a custom rom: UltimaRom (version 8.x), and using XXELLA kernel (?) and XXELLA Modem version.
Since a while, I'm trying to manage the files in it (phone memory or sd card) from my computer, simply by using an USB cable (the one given with the phone or even other cables, it doesn't matter) and the standard MTP protocol, which is used by Google since Android 3.0. And, whatever I try to do, Windows doesn't seem to notice anything. In my device manager, nothing appears. Nothing either in the "My Computer" window, it just doesn't "exist". No reaction at all from Windows. The Phone's charging, but this is all it is.
And I have the same problem using another computer (like my own laptop, or my brother's one). All computers are running Windows 8 x64 Pro.
I tried to install, re install, delete, etc. all the phone drivers I have on this computer, tried to install Samsung Kies, tried some "mounting" apps on the Play Store, nothing's working.
What should I do to make it work?
Thanks a lot!
Might be stating the obvious but is your phone set at usb debugging? I have the same issue from time to time but when I unplug and plug back it fixes itself.
Hope you get your stuff fixed soon.
Sent from my GT-I9300 using xda app-developers app
Thanks for your response.
Yes, USB Debugging is enabled.
Jiraiya-08 said:
Hi guys!
I have a rooted international Galaxy S3 (i9300) phone with a custom rom: UltimaRom (version 8.x), and using XXELLA kernel (?) and XXELLA Modem version.
Since a while, I'm trying to manage the files in it (phone memory or sd card) from my computer, simply by using an USB cable (the one given with the phone or even other cables, it doesn't matter) and the standard MTP protocol, which is used by Google since Android 3.0. And, whatever I try to do, Windows doesn't seem to notice anything. In my device manager, nothing appears. Nothing either in the "My Computer" window, it just doesn't "exist". No reaction at all from Windows. The Phone's charging, but this is all it is.
And I have the same problem using another computer (like my own laptop, or my brother's one). All computers are running Windows 8 x64 Pro.
I tried to install, re install, delete, etc. all the phone drivers I have on this computer, tried to install Samsung Kies, tried some "mounting" apps on the Play Store, nothing's working.
What should I do to make it work?
Thanks a lot!
Click to expand...
Click to collapse
That's odd.. I use Ultima ROM and have updated to 8.1.1. I just checked just to make sure (my last update was done OTA) and yeah, computer recognized phone right away.. heard a little computer sound and everything. I am also running Windows 8
The base changed in v8. If you haven't done a fac reset since then you should try that.
Ok I just tried to make a factory reset, nothing changes...
Oh, and if that can help: when the phone's booting, Windows says "Unrecognized device". When it's booted up, it disapears.
Anyone ?
Drivers...
I used these drivers.
It worked for me...
http://forum.xda-developers.com/showthread.php?t=1564104
Work for me too! THX
Thanks for your help !
Unfortunately it didn't work for me.... :/
Any other ideas ?
Sorry to keep rising this thread but this issue is really annoying... :/
Up
I still have the same problem. No other ideas please ?
? :/
Does Easy UMS work?
Can you connect via adb?
Does Odin recognize the phone?
If no to all of the above, try a different cable / port
Glebun said:
Does Easy UMS work?
Can you connect via adb?
Does Odin recognize the phone?
If no to all of the above, try a different cable / port
Click to expand...
Click to collapse
Thank you for your response !
- Easy UMS doesn't seem to work, even if the app doesn't show any error on the phone
- How do I connect via ADB ? I tried to connect the phone while it is in Download Mode, nothing appears on Windows or Odin
- As I said, in Download Mode, Odin doesn't seems to recognize anything...
And of course, I already tried to change the cable, the USB port, or even the computer i'm connecting the phone to...
Thanks again for your help
Starting to sound like a damaged micro USB port on the phone possibly, or a driver's problem
Oh, and there's a thing: when I reboot the phone, while the Samsung logo appears on the screen with the short jingle, the PC makes 3 or 4 times a sound like something has been plugged, and showes a "Unrecognized device" warning window. When the boot is finished, and the rom is loaded, everything just disappears and no sound is any longer made by the PC.
Also, please note that when I connect the phone to the PC (using the same PC, cable and USB port of course), the phone charges up just like before, without any problem.
have you tried the old drivers?
search Google for " Samsung USB drivers 1.4.6.0 "
disconnect your computer from the internet
Install the drivers.
don't reconnect to the internet.
connect your phone and let windows find the drivers
Ok, so I found a few older threads on this, but no tips in them seem to work in my case. I can't seem to get my S4 to see the PC/USB connection and prompt to select Media Device or the like. The USB icon never even appears in the notification bar. The PC recognizes connection (USB tone sounds) and shows device ready to use, but phone never gives the option. Doesn't seem to matter if USB Debugging is checked or not, or anything else that I can find so far. Here's the things I can generally eliminate:
2 different USB cables worked on wife's S4 on two different PCs. Neither cable or PC worked with my S4
Tried reinstalling Samsung USB drivers just to be sure
Cold booted phone
Tried unchecking and re-checking USB debugging (also tried with it unchecked)
So when we take in working fine on wife's S4, I'd generally guess that we can eliminate cable and PC from the potential problem list. Phone is currently on stock rom, but rooted. Outside of that and freezing VZ Support, Knox, and VZ Tones, no other modifications to the OS. At this point, I'm pretty stumped. Any suggestions on other steps to try?
The problem is your USB settings in the hidden dialers. Look for tutorials on how to enable them, and once found, type *#0808#, and a list of usb otions will come up. Pick any with MTP and they'll work again.
Worked perfect. Thanks muchly!
aidankiller4 said:
The problem is your USB settings in the hidden dialers. Look for tutorials on how to enable them, and once found, type *#0808#, and a list of usb otions will come up. Pick any with MTP and they'll work again.
Click to expand...
Click to collapse
Not to threadjack, but...
On a related issue, win update tried to update my samsung ADP, etc drivers and failed. Ever since, I cannot connect to the PC. The PC doesn't even notice that the phone is connected. I tried the above fix to no avail (it is set to MTP) I uninstalled and reinstalled kies, tried troubleshooting the usb connection, ect...
Please help.
Im_Gumby said:
On a related issue, win update tried to update my samsung ADP, etc drivers and failed. Ever since, I cannot connect to the PC. The PC doesn't even notice that the phone is connected. I tried the above fix to no avail (it is set to MTP) I uninstalled and reinstalled kies, tried troubleshooting the usb connection, ect...
Please help.
Click to expand...
Click to collapse
Try installing/reinstalling Kies, it comes bundled with all the samsung drivers you'll need
Tried that. Twice. To no avail.
But it is no longer a problem. I installed eclipse rom and it now works again.
Who knows what went wrong...
And now it's not working again. Reinstalled (dirty) the ROM without any change. Thoughts?
Hi,
I have litterally looked everywhere before asking and none seem to awnser my issue that I'm having.
I have in the past managed to get my phone to connect on a Win 8.1 Machine, and I managed to root it. I also noticed today that my IMEI is Null/Void. However, when I've come to repair the efs my Phone will not connect anymore. No Drivers are actually installing, when I first plug the phone in I get no automatic driver install from Windows. I have installed the Samsung Mobile Driver V1.5.14.0, and also Kies Version 2. None of this seems to make a difference, I have tried pulling the battery, changed different cables and USB ports but doesn't matter if I reset or anything it won't pick the phone up all it will do is charge the phone.
I checked on USBDeView for the Drivers and even though I have run the Driver install's they do not appear to be installed on the list of drivers I have installed either under "Android,Google or Samsung".
Any help would be fantastic, and then after that I need to fix the Not Registered on Network Error! But one thing at a time!