Download attachment and follow the instructions............
Please make stock rom backup guys I need it very urgently becoz i am not able to boot
Please make stock rom backup guys I need it very urgently becoz i am not able to boot my phone from last month. and zen servicing is very............bad.
i have created a cwm backup... zen 701
kumar87 said:
Please make stock rom backup guys I need it very urgently becoz i am not able to boot my phone from last month. and zen servicing is very............bad.
Click to expand...
Click to collapse
i have created an CWM backup for ZEN 701HD..... will upload and put a link here soon....
here you go......
kumar87 said:
Please make stock rom backup guys I need it very urgently becoz i am not able to boot my phone from last month. and zen servicing is very............bad.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=43739087#post43739087
check out my post...
ZEN Ultrafone 701HD... Factory ROM... flash via firmware upgrade....
HI all... after going through a lot of issues... while playing arround with my phone... i took... factory rom... backup...
same i am in the process of uploading...... on http://d-h.st/bV3
hit thanks if it helps...
install factory rom
defy403 said:
http://forum.xda-developers.com/showthread.php?p=43739087#post43739087
check out my post...
ZEN Ultrafone 701HD... Factory ROM... flash via firmware upgrade....
HI all... after going through a lot of issues... while playing arround with my phone... i took... factory rom... backup...
same i am in the process of uploading...... on http://d-h.st/bV3
hit thanks if it helps...
Click to expand...
Click to collapse
i downloded ur factory rom but how to install it
use SP Flash tools
rishiud said:
i downloded ur factory rom but how to install it
Click to expand...
Click to collapse
use sp flash tools....
please the attached documents for more info...
same here!
defy403 said:
use sp flash tools....
i have the same problem :crying:
how to use sp flash tools , googled it but it it available for different different devices, i think so .>. . .. . . . . . .
Click to expand...
Click to collapse
HELP!
defy403 said:
use sp flash tools....
please the attached documents for more info...
Click to expand...
Click to collapse
I have the same problem but how do i use tha sp flash tools b'cuz usb drivers are not installed . and how do i update the usb drivers when my phone is not booting up?
Please help m in vain :crying:
drivers....
deejae said:
I have the same problem but how do i use tha sp flash tools b'cuz usb drivers are not installed . and how do i update the usb drivers when my phone is not booting up?
Please help m in vain :crying:
Click to expand...
Click to collapse
drivers.. attached... also.. please note... for using sp flash tools with ... zen 701hd....
switch off the phone... remove battery... wait for a minute.... put battery back... then... start sp flash tools.... then connect the phone.... you will see.... VCOM port(xxx) connected via usb.
okay
defy403 said:
drivers.. attached... also.. please note... for using sp flash tools with ... zen 701hd....
switch off the phone... remove battery... wait for a minute.... put battery back... then... start sp flash tools.... then connect the phone.... you will see.... VCOM port(xxx) connected via usb.
Click to expand...
Click to collapse
but how do i install usb drivers when i cant see my phone at device manager.. please help :crying: :crying: :crying: :crying: :crying:
just install the drivers manually
deejae said:
but how do i install usb drivers when i cant see my phone at device manager.. please help :crying: :crying: :crying: :crying: :crying:
Click to expand...
Click to collapse
just install the drivers manually
also try installing pda net desktop software.. that should work
also try.... press Power+VolUp+VolDown the device switches to diagnostic mode during which my PC went into driver hunting mode.. it worked for someone...
My stupidity screwed up my 701 phone
I went to CWM and cleared all cache and data, dalvik cache etc...
But instead of selecting the ROM zip of my phone I stupidly selected ROM of some another phone and flashed it !
Now only the ZEN logo comes up.then screen goes blank and again ZEN logo comes up and the process just repeats
I connected to PC and by the time the PC detects it and maybe load driver for it and ADB commands work, the Phone reboots again and again
And the best part is Power+VOL up+Vol down keys dont work or to go to diagnostic mode . looks like stupidity and foolhardiness finally took its toll
is there a way to flash it back to stock rom, but I guess its hard as the phone is not even waiting till PC detects it in ADB mode
rant over
Anybody please give me the link for stock recovery of 701 HD
Sent from my ultrafone 701HD using XDA Premium 4 mobile app
Encryption Unsuccesful
defy403 said:
just install the drivers manually
also try installing pda net desktop software.. that should work
also try.... press Power+VolUp+VolDown the device switches to diagnostic mode during which my PC went into driver hunting mode.. it worked for someone...
Click to expand...
Click to collapse
WHen it starts it shows encryption unsuccesful and the only option is "reset phone".
and it reboots to recovery. In recvery it shows error :"Mount /data error".
Please HELP Me.
Related
Hello all.
For last 2 days my Xperia S is acting strange.
1: no usb connection to pc; mtp, flash mode..., nothing ( I tried on other pc's, other usb cables
2: media volume stuck at half. Going down and up but till half only.
I did restore factory settings = nothing
Any suggestion?
Thanks in advance.
Sent from my LT26i using xda app-developers app
Try,taking out the battery and than try to put it into flash/fastboot mode.And make sure to try all button configuration....
Hit Thanks if I helped
DekinGBar said:
Try,taking out the battery and than try to put it into flash/fastboot mode.And make sure to try all button configuration....
Hit Thanks if I helped
Click to expand...
Click to collapse
I am not presing thanks ..... becuase havent worked
Is entering in flash mode ... but my pc ( others ) is not seeing it. I hope u understand me '
are you on stock or in custom rom?
Stock
Sent from my LT26i using xda app-developers app
spinky360 said:
I am not presing thanks ..... becuase havent worked
Is entering in flash mode ... but my pc ( others ) is not seeing it. I hope u understand me '
Click to expand...
Click to collapse
I wouldn't say thanks because you can't actually take your battery out
Tapatalked Xperia S
Who says that you cant? I took it for a few times till now. Is very easy
Sent from my LT26i using xda app-developers app
Ben36 said:
I wouldn't say thanks because you can't actually take your battery out
Tapatalked Xperia S
Click to expand...
Click to collapse
Just tell me that you are joking...
Hit Thanks if I helped
My phone is possessed ... im stoping Wi-Fi ( because i have free data ) and after 20-30 sec is showing me that wireless network found [ LOOOOL ]. Im gooing in setings -> Stoping again the wi-fi .,.. after 20 sec ... again.
Any new sugestions ?
So there is no way to flash ROM???
Hit Thanks if I helped
DekinGBar said:
So there is no way to flash ROM???
Hit Thanks if I helped
Click to expand...
Click to collapse
1st: my pc ( and others ) are not detecting him ( phone )
2nd: i dont have CWM installed ( im searching to see how to do " adb wireless " )
3th: some one have to put a full back up after ther ROM ( preferabil stock - un-touch ) in CWM so i can install it
....
I can enter in flash mode but is stay connected in flash mode for 5 sec ... after is restarting bcause ther is no connection with the pc ...
Windows 7 on all these pc's?
Tapatalked Xperia S
Ben36 said:
Windows 7 on all these pc's?
Tapatalked Xperia S
Click to expand...
Click to collapse
No.... 2 windows Xp ... One Ubuntu and a 7/32
Hmm...strange case really.I will try to find a sloution...just tell me your bootloader is locked right?
Hit Thanks if I helped
Yeap...
Sent from my LT26i using xda app-developers app
spinky360 said:
1st: my pc ( and others ) are not detecting him ( phone )
2nd: i dont have CWM installed ( im searching to see how to do " adb wireless " )
3th: some one have to put a full back up after ther ROM ( preferabil stock - un-touch ) in CWM so i can install it
....
I can enter in flash mode but is stay connected in flash mode for 5 sec ... after is restarting bcause ther is no connection with the pc ...
Click to expand...
Click to collapse
I had the same problem with the phone not staying.in flash or fastboot you need to download sony drivers,from there unlock bootloader site. Extractt the. Ini file hard reset ur phone .
On ur pc open device manager
Connect phone into fastboot
On device manager your phone should show as fastboot with a error triange double click quickley before your phone reboots
Click update driver
Select manually
Click show all
Click have disk
Find the . Ini
Dont click next yet
Hard reset phone and reconect as fastboot
Click next all should install ok
If you get error you need to turn digital signing off
You can google this
Phone should now fastboot allowing you to install stock ftf using flashtool.
All data will be lost
Sent from my ST27i using xda app-developers app
nosmaster said:
I had the same problem with the phone not staying.in flash or fastboot you need to download sony drivers,from there unlock bootloader site. Extractt the. Ini file hard reset ur phone .
On ur pc open device manager
Connect phone into fastboot
On device manager your phone should show as fastboot with a error triange double click quickley before your phone reboots
Click update driver
Select manually
Click show all
Click have disk
Find the . Ini
Dont click next yet
Hard reset phone and reconect as fastboot
Click next all should install ok
If you get error you need to turn digital signing off
You can google this
Phone should now fastboot allowing you to install stock ftf using flashtool.
All data will be lost
Sent from my ST27i using xda app-developers app
Click to expand...
Click to collapse
From where fast boot ? I have locked bootloader !!! And i dnt know why you are tellng to to like this! You havent read ? The phone is working grate ( except that is possessed ) I can eneter in Flashmode but PC is not doing the smallest thing ( like ding, fund, connected, unreconized etc... Hardware ) ....
I checked the USB Port -OK everthing is ok
I MANAGED to instal CWM!!!!!
Can someone put a full backup after a stock 45 -50 ( ics ) made with CWM ? THANK YOU IN ADVANCE !!!!
Appoligys didnt read lpck bootloader wherr i,say use,fastboot to install drivers swap for flash mode and then try to repair
I didnt ask you to like my post at all
If you have cwm make a full,backup with cwm
Open device manager turn flash mode on check to see when phone is shown it dosnt have error triange,if it doee,deleate drivers and then,try to repair phone with pc suite
Move backup to pc
Reinstall cwm after its done
And restore data from backup
Sent from my ST27i using xda app-developers app
nosmaster said:
Appoligys didnt read lpck bootloader wherr i,say use,fastboot to install drivers swap for flash mode and then try to repair
I didnt ask you to like my post at all
If you have cwm make a full,backup with cwm
Open device manager turn flash mode on check to see when phone is shown it dosnt have error triange,if it doee,deleate drivers and then,try to repair phone with pc suite
Move backup to pc
Reinstall cwm after its done
And restore data from backup
Sent from my ST27i using xda app-developers app
Click to expand...
Click to collapse
I dont think you understand me rigth ?!
The phone is WORKING! -> Flashmode working ... But when i plug USB ----- Nothing ... and when im saying nothing ... nothing ... i tryed on 5 pc's. 3 USB cables... etc.... etc In device manager is not apearing at all ! in non of the pcs
Thats why i asked some one to put a full backup for it so i can transfer it via Wi-Fi and to install it ok CWM ...
If the pc wont recognice it at all sounds like one of the pins has beem lifted from the maim board have you looked at sending it back under warranty
Sent from my ST27i using xda app-developers app
hi guys, from my understand iwas play in cwm recovery and ipress format system in mounts and storage menu and my phone now not have os and ihavent any roms in my sdcard or any backups and icant go into flash mode or fastboot mode please help me? please my phone is xperia p
alisami288 said:
hi guys, from my understand iwas play in cwm recovery and ipress format system in mounts and storage menu and my phone now not have os and ihavent any roms in my sdcard or any backups and icant go into flash mode or fastboot mode please help me? please my phone is xperia p
Click to expand...
Click to collapse
Why didn't you make a backup before you play?
What software are you using, PC Companion, Sony Update Service(SUS) or Flashtool?
What is your Windows version, and are you using the USB 2.0 ports if you have any? (USB 3.0 won't work)
I
it's also not than easy! u must have then scrolled through all the no's to select yes!
Sent from my AOSP 4.3 Xperia S via Tapatalk
help me?
im on windows 7 32bit itryied use sony pc companion and sony update service ihave usb2 port what ican do
help me
imiss make an backup and my computer not read my phone wht ican do please help me:crying::crying:
alisami288 said:
imiss make an backup and my computer not read my phone wht ican do please help me:crying::crying:
Click to expand...
Click to collapse
Please download and install flashtool (link in post #2).
Turn off your phone, press both power abd volume up untill you feel 3 vibration.
Open flashtool, and connect your phone while holding volume down, leave for 1 minute.
Copy and post flashtool log.
alisami288 said:
imiss make an backup and my computer not read my phone wht ican do please help me:crying::crying:
Click to expand...
Click to collapse
First I think u happy when u format your system but now you're crying?...Can your phone connect in flashmode??
CORRECT ME IF I'M WRONG
cant boot phone into flash mod
when iconnect phone to pc into flash mode first phone running red lite after 3 sconds running green lite after 10 seconds running red lite and it running on sony logo please help me
alisami288 said:
when iconnect phone to pc into flash mode first phone running red lite after 3 sconds running green lite after 10 seconds running red lite and it running on sony logo please help me
Click to expand...
Click to collapse
Was it completely shut off, with power | volume down till the 3 vibrations?
Did you try to install flash mode and fastboot mode drivers from flashtool\drivers, the 2 are at the bottom of the list.
Did you use PCC or SUS or Flashtool on this PC before?
help
dara007_168 said:
First I think u happy when u format your system but now you're crying?...Can your phone connect in flashmode??
CORRECT ME IF I'M WRONG
Click to expand...
Click to collapse
yes ido all of but that not work for me install falsh and fastboot drivers but not work for me and now what ican do thanx for all but not work for me
help
yes ihave ppc and sus and flashtool put iformat my computer after ibrick my phone
alisami288 said:
yes ihave ppc and sus and flashtool put iformat my computer after ibrick my phone
Click to expand...
Click to collapse
Try to install all updates from windows
Can u boot into recovery.Can u connect ur phone with pc in CWM. If can it's easy if not you can't fix your phone.if u can connect ur phone to pc when in CWM pc recognized your device go to mount Usb or what ever (i forgot But I can do it before)copy stock firmware.zip(flashable zip) flash it
CORRECT ME IF I'M WRONG
help
yes udo it but not work for me can you made video igive me link to video how ican do this please help me
help me
ChikeD said:
Try to install all updates from windows
Click to expand...
Click to collapse
how to do it please
alisami288 said:
how to do it please
Click to expand...
Click to collapse
Windowsupdate, just run it untill it don't need to update anymore
hello guys,
i have sony xperia u having STE 4.4.4 kitkat. but becouse my phone not recognise in any pc, i flash stock rom via TWRP recovery. so now problem is my XPERIA U is not recognize in any pc via flashtool so i can't flash ftf or any other rom. so plz anyone have any solution to fix this problem??
Try turning it off, then holding down the volume down (or up?) key when you plug it into the computer, the LED should go purple or green or something. Then see if it shows up
jebediaah said:
Try turning it off, then holding down the volume down (or up?) key when you plug it into the computer, the LED should go purple or green or something. Then see if it shows up
Click to expand...
Click to collapse
i traied it so many time but laptop does not recognize my phone as xperia u so it do not connect in ither flashboot or fastboot mode. and i installed all drivers which are neccessory. :
Have you tried installing drivers with flashtool?
Have you got access to a linux distro? because thats how I was able to connect my bricked xperia go in fastboot mode.
Maybe try unistalling your drivers and reinstalling them.
ok you need to tell me what os are you using and what rom did you try to flash does your phone light up when you connect it in fastboot if so its a drivers problem you should see if drivers are installed correctly if its correct then change your cable and the usb hub and try again Thanking me is always better than saying thanx
jebediaah said:
Have you tried installing drivers with flashtool?
Have you got access to a linux distro? because thats how I was able to connect my bricked xperia go in fastboot mode.
Maybe try unistalling your drivers and reinstalling them.
Click to expand...
Click to collapse
ya i have tried installing drivers via flashtool and i also changed charging socket because it seems like some hardware problem but problem is still existed....and i dont know about linux much so can you give me some brief???/
THANK YOU
MaDTH Bistata said:
ok you need to tell me what os are you using and what rom did you try to flash does your phone light up when you connect it in fastboot if so its a drivers problem you should see if drivers are installed correctly if its correct then change your cable and the usb hub and try again Thanking me is always better than saying thanx
Click to expand...
Click to collapse
i was using xperia STE 4.4.4 kitkat. and then i flash Stock JB 4.1.2. but i dont have rom in my SD card and it is also not connected to flashtool ( every time i connect to pc its show the massage of Device is not recognise )so i cant revert it back to STE 4.4.4 so now what shold i do????
ok if your twrp is working do the following
1-download a new rom
2-see mount usb and check it
3-now your phone will connect storage
4-do the steps to install the rom
5-ALLWAYS DO A NANDROID backup after it
if twrp is not working
does your phone work with the stock rom??? if so it will be so easy just root it (if its unrooted) and install cwm or twrp
hope that i helped
9228
MaDTH Bistata said:
ok if your twrp is working do the following
1-download a new rom
2-see mount usb and check it
3-now your phone will connect storage
4-do the steps to install the rom
5-ALLWAYS DO A NANDROID backup after it
if twrp is not working
does your phone work with the stock rom??? if so it will be so easy just root it (if its unrooted) and install cwm or twrp
hope that i helped
Click to expand...
Click to collapse
My phone is not connecting to pc. It's shows device not recognize. And even i install all the drivers for xperia u and fastboot/flashboot both. so n now i think it's may be a hardware problem. and i also showed it to mabile repair technician but he even can't do anything.:crying::crying::crying::crying:
dont worry
D3ViL's AnG3L said:
My phone is not connecting to pc. It's shows device not recognize. And even i install all the drivers for xperia u and fastboot/flashboot both. so n now i think it's may be a hardware problem. and i also showed it to mabile repair technician but he even can't do anything.:crying::crying::crying::crying:
Click to expand...
Click to collapse
dont worry man we will fix it i promise
let me do some research and i will get you the solution man
try it
D3ViL's AnG3L said:
My phone is not connecting to pc. It's shows device not recognize. And even i install all the drivers for xperia u and fastboot/flashboot both. so n now i think it's may be a hardware problem. and i also showed it to mabile repair technician but he even can't do anything.:crying::crying::crying::crying:
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1849170 check this and try it if you have any problems then contact me
data cable
D3ViL's AnG3L said:
My phone is not connecting to pc. It's shows device not recognize. And even i install all the drivers for xperia u and fastboot/flashboot both. so n now i think it's may be a hardware problem. and i also showed it to mabile repair technician but he even can't do anything.:crying::crying::crying::crying:
Click to expand...
Click to collapse
Even your data cable can cause these issues try another data cable.
make sure it is an standard one!:good:
MaDTH Bistata said:
dont worry man we will fix it i promise
let me do some research and i will get you the solution man
Click to expand...
Click to collapse
Thanxxx buddy....
Reply soon
The_Ace said:
Even your data cable can cause these issues try another data cable.
make sure it is an standard one!:good:
Click to expand...
Click to collapse
ya i tried it too
but no positive result.....
I have same problem which isnot sorted out yet
HEllow guys..
the simple solution that my device was needed was one soldering at charger connecting pin. i don't know at where that person did that soldering but now its recognize in every pc.
and thank a lot for your help in troubleshoot this problem
soft bircked & YGDP not working a311
please help me.. i soft bricked my nitro a311 & try to flash stock rom with the help of YGDP.. but it is stucking at "Enetering download mode"..
please tell me how can i flash to stock rom in brief...:crying::crying:
@bhavincb check this thread for flashable stock rom for a311 via twrp recovery
http://forum.xda-developers.com/a310/orig-development/rom-twrp-flashable-micromax-canvas-t3287008
bhavincb said:
please help me.. i soft bricked my nitro a311 & try to flash stock rom with the help of YGDP.. but it is stucking at "Enetering download mode"..
please tell me how can i flash to stock rom in brief...:crying::crying:
Click to expand...
Click to collapse
Do you have custom recovery? If yes then follow Bhushan1985's post
if having stock recovery then download latest ygdp tool and while flashing (ENTERING DOWNLOAD MODE) connect your phone WITHOUT BATTERY.
Hope it will help!
---------- Post added at 08:59 AM ---------- Previous post was at 08:57 AM ----------
Check this link for step to step instruction for flashing stock rom with ygdp
when flashing micromax nitro a311 usig ygdp tool it stuck on 80%
when flashing micromax nitro a311 usig ygdp tool it stuck on 80% please help.
when i start and use usb cable connect and it stay entering mode and it sound begin connect and disconect plz help what will doooo??????
bhavincb said:
please help me.. i soft bricked my nitro a311 & try to flash stock rom with the help of YGDP.. but it is stucking at "Enetering download mode"..
please tell me how can i flash to stock rom in brief...:crying::crying:
Click to expand...
Click to collapse
don't know you still have this problem, may be it will help other user
If YGDP tool not working for you use sptool but where to find firmware for sptool...
its easy, Load your .CPB in YGDP tool. Once it loaded you will have new folder "DownFiles" in YGDP directory for example in my case
C:\YLXZGJ\YGDP\DownFiles
Here you will find your sptool firmware, grap it past somewhere
Flash with sptool
Enjoy....Hope it help
u need to install & upgrade the drivers
khan_frd2002 said:
don't know you still have this problem, may be it will help other user
If YGDP tool not working for you use sptool but where to find firmware for sptool...
its easy, Load your .CPB in YGDP tool. Once it loaded you will have new folder "DownFiles" in YGDP directory for example in my case
C:\YLXZGJ\YGDP\DownFiles
Here you will find your sptool firmware, grap it past somewhere
Flash with sptool
Enjoy....Hope it help
Click to expand...
Click to collapse
I was irritated by the same problem, u need to install (or upgrade the drivers when u connect your phone it will be shown under device manager-port (COM & LTP) only for few seconds ) vcom driver then only YGPD will detect your phone.
preetigupta590 said:
when i start and use usb cable connect and it stay entering mode and it sound begin connect and disconect plz help what will doooo??????
Click to expand...
Click to collapse
I was irritated by the same problem, u need to install (or upgrade the drivers when u connect your phone it will be shown under device manager-port (COM & LTP) only for few seconds ) vcom driver then only YGPD will detect your phone.
i also have same problem sir........
k2ajeet said:
when flashing micromax nitro a311 usig ygdp tool it stuck on 80% please help.
Click to expand...
Click to collapse
my download stop at 83% and cpb download failed..............................
please help me as possible as.
sp tool also not working it shows brom error 2035
how to update drivers
lokesh314 said:
I was irritated by the same problem, u need to install (or upgrade the drivers when u connect your phone it will be shown under device manager-port (COM & LTP) only for few seconds ) vcom driver then only YGPD will detect your phone.
Click to expand...
Click to collapse
i am facing the same problem, i dont know how to update driver, i tried to update from windows update, it says you got the the latest drivers, can you provide me the link/ files for micromaxa311 driver by which my mobile can get detected by sp flash tool (ygdp too)
Same issuew
bhavincb said:
please help me.. I soft bricked my nitro a311 & try to flash stock rom with the help of ygdp.. But it is stucking at "enetering download mode"..
Please tell me how can i flash to stock rom in brief...:crying::crying:
Click to expand...
Click to collapse
same issue kya karu bhai
Just FYI: I have a Coolpad F1 (which is the same hardware as the A310). I tried a bunch of ROM's incl. the 7.1.2 Lineage one, but non worked with Pokemon Go (it's my daughters "gaming phone"). So I tried the Micromax stock ROM - and Pokeman Go works. It's a terrible 4.4 ROM with a lot of trash programs built in, so really not worth considering - but Pokeman Go works..
My phone has TWRP 2.8.x installed, but I flashed it with fastboot (only boot & system), which I extracted from the stock cpb-file (4.4.031.P0.141015.8297W_I01.CPB). No need to use ygdp at all - besides using it to split the cpb-file into the flashable images. Wipe data, dalvik and cache in TWRP and then flash with fastboot the boot.img and system.img. I had some problem flashing the system.img, it worked with first formatting it and then flash with "fastboot flash -u system.img".
First install coolpad driver . because ygdp coolpad software.
Then use sp tool and flash
But sptool give error,that time you go to device manager and uninstall the driver,after uninstall coolpad driver automatically taken.and then ygdp detect your device and start flashing.
Don't use battery .
100% successful
preetigupta590 said:
when i start and use usb cable connect and it stay entering mode and it sound begin connect and disconect plz help what will doooo??????
Click to expand...
Click to collapse
Me to in the problem
Dear Developers,
I need help with my nitro A311
I rooted it with Kingroot App second time,,
then I used SDFIX app and device starts misbehaving,,
So I unrooed it after removing that app..but problem persists,,,
sometimes no launcher works on it and system settings starts crashing again and again -
whenever I install any new app or use system twearking apps like app lock,tasker or gallery locker.
after reboots it works good ,,
But sometimes during reboot it does not start and starts rebooting again and again untill I remove the battery and starts it manually.
can anyone help me know what damage I have done and How to solve this problem,,
Please help.. (sorry for any language mistake )
rajat_singhh said:
Dear Developers,
I need help with my nitro A311
I rooted it with Kingroot App second time,,
then I used SDFIX app and device starts misbehaving,,
So I unrooed it after removing that app..but problem persists,,,
sometimes no launcher works on it and system settings starts crashing again and again -
whenever I install any new app or use system twearking apps like app lock,tasker or gallery locker.
after reboots it works good ,,
But sometimes during reboot it does not start and starts rebooting again and again untill I remove the battery and starts it manually.
can anyone help me know what damage I have done and How to solve this problem,,
Please help.. (sorry for any language mistake )
Click to expand...
Click to collapse
Reflash rom. There must be a problem with system files.
Sahilsinghlodhi said:
Reflash rom. There must be a problem with system files.
Click to expand...
Click to collapse
Thanks for reply sir
but can you please tell how to do with a windows 7 32 bit laptop..
rajat_singhh said:
Thanks for reply sir
but can you please tell how to do with a windows 7 32 bit laptop..
Click to expand...
Click to collapse
What rom you wanna flash??
Sahilsinghlodhi said:
What rom you wanna flash??
Click to expand...
Click to collapse
i want to flash stock rom,,
i have reached the final step by configuring .CPP file in YGDP tool but YGDP tool is not recognising my phone,,
i have another query here...
when we go into recovery mode ,, there is an option "apply update from SD card"
can we directly flash from there..
rajat_singhh said:
i want to flash stock rom,,
i have reached the final step by configuring .CPP file in YGDP tool but YGDP tool is not recognising my phone,,
i have another query here...
when we go into recovery mode ,, there is an option "apply update from SD card"
can we directly flash from there..
Click to expand...
Click to collapse
You must install vcom deivers manually.
http://www.micromaxinfo.com/datahan...ection=mobile-canvas-nitro-a311&file=A311.rar
Open ygdp in compatibility mode for windows xp.
Password:369
Add cpb firmware. (Not explaining how to as u have already done it.)
Click on apply update.
Switch off your phone and connect it. Make sure you hold volume up key before connecting and keep held till you see device in YGDP.
Click on start.
There should be no problem that way.
Sahilsinghlodhi said:
You must install vcom deivers manually.
http://www.micromaxinfo.com/datahan...ection=mobile-canvas-nitro-a311&file=A311.rar
Open ygdp in compatibility mode for windows xp.
Password:369
Add cpb firmware. (Not explaining how to as u have already done it.)
Click on apply update.
Switch off your phone and connect it. Make sure you hold volume up key before connecting and keep held till you see device in YGDP.
Click on start.
There should be no problem that way.
Click to expand...
Click to collapse
i think I have installed drivers ,,
whenever i connects my phone to laptop,,with battery or without battery,, its showing (in device manager)
"MediaTek PreLoader USB VCOM (COM10)" for some time and then disappears,
recovery mode is opening by holding volume up key before connecting phone,,
rajat_singhh said:
i think I have installed drivers ,,
whenever i connects my phone to laptop,,with battery or without battery,, its showing (in device manager)
"MediaTek PreLoader USB VCOM (COM10)" for some time and then disappears,
recovery mode is opening by holding volume up key before connecting phone,,
Click to expand...
Click to collapse
Manually install vcom drivers. Thn try. if still not detecting remove battery tun try. (Vol+ key should be holded while connecting)
Sahilsinghlodhi said:
Manually install vcom drivers. Thn try. if still not detecting remove battery tun try. (Vol+ key should be holded while connecting)
Click to expand...
Click to collapse
installed drivers second time and manually,,still not working
what type of usb cord should be used for flashing ?
rajat_singhh said:
installed drivers second time and manually,,still not working
what type of usb cord should be used for flashing ?
Click to expand...
Click to collapse
Original in the box mmx. Not sure for other cables.
Sahilsinghlodhi said:
Original in the box mmx. Not sure for other cables.
Click to expand...
Click to collapse
Not working with original one
rajat_singhh said:
Not working with original one
Click to expand...
Click to collapse
There is something wrong with drivers. Have u installed in correct path????
Sahilsinghlodhi said:
There is something wrong with drivers. Have u installed in correct path????
Click to expand...
Click to collapse
correct path mean?
I installed them in device manager through add hardware legacy option..
drivers are recognising my phone now but ygdp tool is not..
rajat_singhh said:
correct path mean?
I installed them in device manager through add hardware legacy option..
drivers are recognising my phone now but ygdp tool is not..
Click to expand...
Click to collapse
Is PDAnet working on pc with your phone ???
Sahilsinghlodhi said:
Is PDAnet working on pc with your phone ???
Click to expand...
Click to collapse
that requires USB debugging,,
but my phone struck at boot logo,,
it starts occasionally,, then it's app starts crashing crashing,,, so then I have to remove battery again,,
rajat_singhh said:
that requires USB debugging,,
but my phone struck at boot logo,,
it starts occasionally,, then it's app starts crashing crashing,,, so then I have to remove battery again,,
Click to expand...
Click to collapse
You must have to turn on usb debugging for ygdp to detect your phone i think.
And try spflash tool too.
Sahilsinghlodhi said:
You must have to turn on usb debugging for ygdp to detect your phone i think.
And try spflash tool too.
Click to expand...
Click to collapse
how to turn on developers mode in switch off phone,, and ygdp tool will flash it in that state...
rajat_singhh said:
how to turn on developers mode in switch off phone,, and ygdp tool will flash it in that state...
Click to expand...
Click to collapse
http://forum.xda-developers.com/a310/orig-development/rom-twrp-flashable-micromax-canvas-t3287008
Flash this with twrp.