This was just a personal hobby project, but it seems many people are using these builds, so I'm starting this thread to keep the main CM thread clean.
The nightly is built at 6:30AM IndianStandardTime (GMT+5:30), and contains all changes synced till then. The most prominent difference between these builds and the official ones is that there builds are compiled using the Linaro toolchain. To me, this results in a smoother UI, and better battery life than the official builds. From time to time, these builds may also contain some hotfixes for small problems on official builds, and they may also contain some cherrypicks.
You can just install these builds over official builds without a data wipe. You can even go back to the official builds without a data wipe.
Download link: https://copy.com/vJqpoVqwoUXJ
Please check MD5 before flashing.
What are the drawbacks of building with Linaro? I assume there must be some, if the official build is not using this, right?
TheSaw said:
What are the drawbacks of building with Linaro? I assume there must be some, if the official build is not using this, right?
Click to expand...
Click to collapse
The drawbacks are that theoretically, there might be some unexpected side effects if building from a non-standard compiler. I personally haven't seen any since I've been using it. Also, I think the CM team thinks Linaro is just placebo, and hence they don't use it.
kalpik said:
Please check MD5 before flashing.
Click to expand...
Click to collapse
Can you please provide the MD5sum?
I'm glad you opened an independent thread for your build!
Keep it up!!
chrhei said:
Can you please provide the MD5sum?
Click to expand...
Click to collapse
The MD5s are also present in the link.
Is the pixelated icons fixed on your latest build: "6-25-2013"??
thanks..
markjamezmark said:
Is the pixelated icons fixed on your latest build: "6-25-2013"??
thanks..
Click to expand...
Click to collapse
Yes, they are fixed. Just so you know, they will be fixed in the next official nightly too
kalpik said:
Yes, they are fixed. Just so you know, they will be fixed in the next official nightly too
Click to expand...
Click to collapse
Nice! That's I've waiting for. Currently downloading your personal compiled build.
Do you have any ideas when the final/stable build will be released?
markjamezmark said:
Do you have any ideas when the final/stable build will be released?
Click to expand...
Click to collapse
Never, as our devices are't fully open source
kalpik said:
Never, as our devices are't fully open source
Click to expand...
Click to collapse
What is hotfix? Sry for noob question
And where is changelog?
dinos3 said:
What is hotfix? Sry for noob question
And where is changelog?
Click to expand...
Click to collapse
There are no stupid questions, only stupid answers
I'm sorry I didn't explain it better in the OP. By hotfix, I mean like the icon pixellation issue that was present in the past few official nightly builds wasn't there on mine. So from time to time, if I find some problem in the official nightlies, and I can fix them, the fixes will be included in my builds
kalpik said:
There are no stupid questions, only stupid answers
I'm sorry I didn't explain it better in the OP. By hotfix, I mean like the icon pixellation issue that was present in the past few official nightly builds wasn't there on mine. So from time to time, if I find some problem in the official nightlies, and I can fix them, the fixes will be included in my builds
Click to expand...
Click to collapse
Thanks
Are you going to write changelog maybe?
Changelog is the same as the official changelog
Going to flash this because.
A) last few roms I Flashed have either broken phone or Gps won't lock never both working.
b) and cos cyanogen mod is my preferred base for a rom
thanks buddy will report back after installing
Sent from my GT-I9100 using Tapatalk 2
Just to be sure: Can I fix your build over the official CM10.1 nightly without a full wipe and go back to the official Nightly when needed?
Edit: Chrome reports m-10.1-20130625-UNOFFICIAL-i9100.zip as malicious "m-10.1-20130625-UNOFFICIAL-i9100.zip scheint schädlich zu sein."
feydakin said:
Just to be sure: Can I fix your build over the official CM10.1 nightly without a full wipe and go back to the official Nightly when needed?
Click to expand...
Click to collapse
That is correct
Sent from my GT-I9100 using Tapatalk 4 Beta
diddly3000 said:
Going to flash this because.
A) last few roms I Flashed have either broken phone or Gps won't lock never both working.
b) and cos cyanogen mod is my preferred base for a rom
thanks buddy will report back after installing
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
When GPS don't lock in a nightly, wipe cache partitions and dalvik cache and fix permitions. Ever works for me.
Sent from my GT-I9100 using Tapatalk 4 Beta
feydakin said:
Chrome reports m-10.1-20130625-UNOFFICIAL-i9100.zip as malicious "m-10.1-20130625-UNOFFICIAL-i9100.zip scheint schädlich zu sein."
Click to expand...
Click to collapse
Yup, I have seen that too. But I think Chrome does not like copy.com.
Nice rom so far. Gps works as does phone
Sent from my GT-I9100 using Tapatalk 2
Related
Here is a link to the nightly CM6 builds being compiled by the guys at #teamdouche.
NIGHTLY BUILDS Here
MDPI GAPPS Here
Credit to #teamdouche for their amazing dedication and hard work!
If you want this link to stay up, do NOT bug #TeamDouche do not ask them any questions, do not report any bugs, let them do their job!!!!!
THESE DO NOT INCLUDE GOOGLE APPS AND ARE STILL BUGGY. DO A NANDROID BACKUP, WIPE AND THEN FLASH
Cool man thanks.
Thanks man
any link to changelog?
I flashed this and I got stuck in boot loop so I reverted to Myfroyo-rc1 that I edited to have stock launcher
Sent from my myTouch 3G Slide using XDA App
kingofyo1 said:
any link to changelog?
Click to expand...
Click to collapse
It'd be over on Chris Soyar and Wes Garner's githubs probably.
Whoareyou said:
I flashed this and I got stuck in boot loop so I reverted to Myfroyo-rc1 that I edited to have stock launcher
Sent from my myTouch 3G Slide using XDA App
Click to expand...
Click to collapse
No, you reverted to Eugene's ROM that you put Launcher2 in.
r0man said:
It'd be over on Chris Soyar and Wes Garner's githubs probably.
No, you reverted to Eugene's ROM that you put Launcher2 in.
Click to expand...
Click to collapse
SNAP!
Which one is more complete this rom or eugene's?
lviv73 said:
Which one is more complete this rom or eugene's?
Click to expand...
Click to collapse
Did you read the OP? It doesn't have google apps and is very buggy, vs Eugenes is a daily driver. hmmm
can someone post the google apps in a flashable zip?
rapidfire224 said:
can someone post the google apps in a flashable zip?
Click to expand...
Click to collapse
Just download rom manager they have Mytouch slide in there inventory thing now with cm6 nightlys and google apps
Sent from my myTouch 3G Slide using XDA App
WOW.. Incredible.. great work ...thanks
has anybody tried any of the nightly builds to see how much is working and how stable they are?
I tried the newest on from the 14th. It booted up and that was about all you could do. No wifi, so I stopped there
CheifzReloaded posted something on his twitter the other day regarding the Slide so I'm guessing it won't be to much longer before we have our CM6 ported from them guys.
bodybombs said:
has anybody tried any of the nightly builds to see how much is working and how stable they are?
Click to expand...
Click to collapse
I've been flashing them every night for fun, but they are definitely not usable. There are lots of bugs. I just flash them to get a taste of their progress and what kind of features and goodies we can expect. It's going to be awesome when they give us a finished product!
hopefully they release soon, i still havent rooted yet, im waiting to see how well the release is before, but im getting bored with stock.
What kernel version is being used on these nightlies?
If it's the same as what we have now you can push wlan.ko to fix wifi.
gapps: http://kanged.net/mirror/download.php?file=gapps-mdpi-FRF91-3-signed.zip
r0man said:
What kernel version is being used on these nightlies?
If it's the same as what we have now you can push wlan.ko to fix wifi.
gapps: http://kanged.net/mirror/download.php?file=gapps-mdpi-FRF91-3-signed.zip
Click to expand...
Click to collapse
While this may work, the phone goes to a black screen after about a minutes worth of use and the only way I've found to make it workagain is to pull the battery. Eugene's CM6 kang is much more usable than this is. Although I haven't tried it with gapps flashed over the top. That could be the difference. I will try it later and report back.
Dear friends,
I just install Cyanogenmod 7.2 RC0 (built 2/10/12) on my HTC Aria.
After this I have some problems:
1. Home and Search Buttons doesn't work;
2. Screenlock doesn't work ( I tried pattern lock configuration).
Have you any experience?
Need your help.
Best regards,
Mamuka
gijua_rx7 said:
Dear friends,
I just install Cyanogenmod 7.2 RC0 (built 2/10/12) on my HTC Aria.
After this I have some problems:
1. Home and Search Buttons doesn't work;
2. Screenlock doesn't work ( I tried pattern lock configuration).
Have you any experience?
Need your help.
Best regards,
Mamuka
Click to expand...
Click to collapse
Try doing a clean install.
What do you mean in "clean install"?
Is it better to install "Nightly" then "RC"?
Please, give me a download link for CM 7.2 fully working version without any bugs.
gijua_rx7 said:
What do you mean in "clean install"?
Is it better to install "Nightly" then "RC"?
Please, give me a download link for CM 7.2 fully working version without any bugs.
Click to expand...
Click to collapse
It means to wipe everything before flashing. Try the one in this post: http://forum.xda-developers.com/showpost.php?p=24340035&postcount=250. Nightlies are more updated than RCs.
Theonew said:
It means to wipe everything before flashing. Try the one in this post: http://forum.xda-developers.com/showpost.php?p=24340035&postcount=250. Nightlies are more updated than RCs.
Click to expand...
Click to collapse
but the nightlies are more buggy than the rc's, the rc's are more buggy than the stable. The stable versions are just what the name says, IMO The stable versions are the best if you dont want to deal with bugs. If you are like me and dont mind them then go with nightlies or the RC's. Personally I am using the RC from the cyanogenmod site.
benbailey84 said:
but the nightlies are more buggy than the rc's, the rc's are more buggy than the stable. The stable versions are just what the name says, IMO The stable versions are the best if you dont want to deal with bugs. If you are like me and dont mind them then go with nightlies or the RC's. Personally I am using the RC from the cyanogenmod site.
Click to expand...
Click to collapse
The one I linked to has no noticeable bugs. Also, if something is a nightly, it doesn't mean that it needs to have bugs. Usually just the earlier nightlies have bugs.
Theonew said:
It means to wipe everything before flashing. Try the one in this post: http://forum.xda-developers.com/showpost.php?p=24340035&postcount=250. Nightlies are more updated than RCs.
Click to expand...
Click to collapse
Thank you very much. This version works without problems.
Problem's with twitter
Sorry me for my bad english.
I was installed CuanogenMod 7.2.0-RC1 and after that twitter hasn't working. How I
make to work that?
Thanks you.
Dn4g said:
Sorry me for my bad english.
I was installed CuanogenMod 7.2.0-RC1 and after that twitter hasn't working. How I
make to work that?
Thanks you.
Click to expand...
Click to collapse
only install gapp.
bigboss555 said:
only install gapp.
Click to expand...
Click to collapse
could you tell me a titles of this gapp. Where I can get it? Google Play?
Dn4g said:
could you tell me a titles of this gapp. Where I can get it? Google Play?
Click to expand...
Click to collapse
Gapps are available here: http://goo.im/gapps/gapps-gb-20110828-signed.zip.
Theonew said:
Gapps are available here
Click to expand...
Click to collapse
I have installed gapps, but Twitter doesnt want to work anyway.
The roms that i've teseted
So in the begining of this there was only one rom for 5.0
Which is the firsr unoff cyanogenmod
So i flashed it with the gapps but there was a lot of bugs (no storage , no gps ,,,)
So i returned back to cloudyg3
Then the second thread for the cyanogenmod was relased so i flashed the rom but with the same bugs i decided to wait for offi..
Then another one by gabmus was relased this one was good with me.. With only a few bugs like chatting apps even with that i used it daily till the liquidsmooth relase
It was the best with no bugs even the video playback works fine so it's the best one there
What i used :
Twrp 2.8.1.1
Gapps
Beta superSU
Hope it was useful
Sorry for bad eng
double tap to wake works properly?
azher98 said:
Then another one by gabmus was relased this one was good with me.. With only a few bugs like chatting apps even with that i used it daily till the liquidsmooth relase
Click to expand...
Click to collapse
This being the guy who deletes the entire CM code tree multiple times when he gets confused? Has trouble using supersu in cm (wtf?) Can't figure out a boot loop in his own ROM and gets on IRC to help fix it?
Good luck with that.
migueldbr said:
double tap to wake works properly?
Click to expand...
Click to collapse
There's a flaashible zip floating around the official thread that fixes it.
Also there are test builds for aicp based on 5.0 that I ran the better part of today and I didn't find any issues. Knock on works.
Lawlrus said:
There's a flaashible zip floating around the official thread that fixes it.
Also there are test builds for aicp based on 5.0 that I ran the better part of today and I didn't find any issues. Knock on works.
Click to expand...
Click to collapse
link for AICP based on LP please!
Paulinhip said:
link for AICP based on LP please!
Click to expand...
Click to collapse
Go to the original android development section.
Lawlrus said:
Go to the original android development section.
Click to expand...
Click to collapse
thanks
Sorry, false thread
migueldbr said:
double tap to wake works properly?
Click to expand...
Click to collapse
No it doesn't but i guess there is a fix
Screen says liquid.. Your text says cm.. A bit confused after trying all these roms maybe?
metteduch said:
Screen says liquid.. Your text says cm.. A bit confused after trying all these roms maybe?
Click to expand...
Click to collapse
Nope i said that i've tested cm but now im on liquid
Lawlrus said:
There's a flaashible zip floating around the official thread that fixes it.
Also there are test builds for aicp based on 5.0 that I ran the better part of today and I didn't find any issues. Knock on works.
Click to expand...
Click to collapse
Can you please share the flashable zip? I looked on the 10 latest pages of this one and didn't find anything: http://forum.xda-developers.com/lg-g2/development/rom-cyanogenmod-12-0-lg-g2-t2944269
ThePotatoRage said:
Can you please share the flashable zip? I looked on the 10 latest pages of this one and didn't find anything: http://forum.xda-developers.com/lg-g2/development/rom-cyanogenmod-12-0-lg-g2-t2944269
Click to expand...
Click to collapse
#1388 and #1389 in the larger cm12 thread
Lawlrus said:
#1388 and #1389 in the larger cm12 thread
Click to expand...
Click to collapse
Thanks
https://github.com/OnePlusOSS/android_kernel_oneplus_msm8994/tree/oneplus/6.0.1
Legit!
krishna442 said:
https://github.com/OnePlusOSS/android_kernel_oneplus_msm8994/tree/oneplus/6.0.1
Hope this one legit.
Browsing from phone, just wanted to share. Sorry if it ain't legit
Click to expand...
Click to collapse
It is legid, check grarak's tweet.
krishna442 said:
https://github.com/OnePlusOSS/android_kernel_oneplus_msm8994/tree/oneplus/6.0.1
Hope this one legit.
Browsing from phone, just wanted to share. Sorry if it ain't legit
Click to expand...
Click to collapse
Offical cm comes in 4 days.
For the noobs among us. What does this mean? Is the oxygen OS going to be replaced by CM. Will the fingerprint sensor and laser autofocus start working on CM
It means cm started using latest bootloader and official status to get ota, posible improvement in forum, camera, and sound quality (not that was an issue before)
Sent from my ONE A2005 using Tapatalk
izzikiorage said:
For the noobs among us. What does this mean? Is the oxygen OS going to be replaced by CM. Will the fingerprint sensor and laser autofocus start working on CM
Click to expand...
Click to collapse
Finger print senor and laser autofocus has been working for a long time, but there are kernel side improvements in the MM source for at least the finger printer sensor.
This means we are getting official CyanogenMod (starting with nightlies). Nothing to do with OnePlus or OOS, their OTA will come in the next couple of weeks AFAIK.
Additionally, our kernel developers get to have fun fixing OnePluses *presumably* rushed kernel code
Nice, so after a proper flash i can start using the snapshots for CM? (nightlies are a little too unpredictable for me)
And this is CM 13? the marshmallow one
Shibli Aftab:
https://mobile.twitter.com/Grarak/status/738825631266394112
Verstuurd vanaf mijn ONE A2003 met Tapatalk
Looks like it's building already!
http://jenkins.cyanogenmod.com/view/android/job/android/164352/
mclarenvj said:
Looks like it's building already!
http://jenkins.cyanogenmod.com/view/android/job/android/164352/
Click to expand...
Click to collapse
http://download.cyanogenmod.org/
Can someone please explain to me how to go from Grarak's last CM13 Build to these nightly builds?
CJOS100 said:
Can someone please explain to me how to go from Grarak's last CM13 Build to these nightly builds?
Click to expand...
Click to collapse
i downloaded nightly build and dirty flashed it
Regards,
flo071
flo071 said:
i downloaded nightly build and dirty flashed it
Regards,
flo071
Click to expand...
Click to collapse
That definitely worked? Because I wasn't sure after what Grarak said on twitter: http://i.imgur.com/NlWt5qn.png
CJOS100 said:
That definitely worked? Because I wasn't sure after what Grarak said on twitter: http://i.imgur.com/NlWt5qn.png
Click to expand...
Click to collapse
i was on graraks 3rd june build
i flashed the oos3.0.1 firmware and twrp hybrid before that
Regards,
flo071
Sent from my OnePlus2 using XDA Labs
This is CyanogenMod, recompiled from Seraph08 sources with (also selfcompiled) Uber Toolchain 4.9. If there are Bugs, they should be identical to Seraph08 version. If there are additional Bugs only to be found in this ROM, please let me know.
One thing though: I'm not a developer. I just recompiled the ROM. So if someone finds a bug and has an idea how to fix it, please tell me.
Sources:
Please see thread of Seraph08, to be found here: http://forum.xda-developers.com/oneplus-2/development/6-0-x-cyanogenmod-13-oneplus-2-t3292436/
Download:
https://www.androidfilehost.com/?w=files&flid=132037
Opengapps:
http://opengapps.org
SuperSU: https://download.chainfire.eu/supersu (will redirect you to the latest version)
XDA:DevDB Information
CyanogenMod 14.1, ROM for the OnePlus 2
Contributors
dansou901, Seraph08, Grarak, Mahdi768
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Testing
Beta Release Date: 2016-12-16
Created 2016-11-27
Last Updated 2016-12-16
For updates, dirty flash (if you are coming from a previous version of exactly this ROM) should be fine, but format system and cache before you flash. First boot will take 5-10 minutes, depending on how many apps you have installed (more apps = longer first boot).
If there is no changelog for a new build, have a look at https://www.cmxlog.com/14.1/oneplus2/ and https://github.com/Seraph08/device_oneplus_oneplus2/commits/cm-14.1.
12.12.2016:
- alert slider is fixed (was broken in build of 6th December)
- updated to Android 7.1.1
05.12.2016:
- SELinux back to permissive
01.12.2016:
- SELinux is enforcing now (V4A users beware)
- Latest version of SuperSU won't break sensors anymore
Some specs of rom would be great
22vlaja said:
Some specs of rom would be great
Click to expand...
Click to collapse
What do you want to know?
New build is up!
dansou901 said:
New build is up!
Click to expand...
Click to collapse
Change log??
Wilguens Joachin said:
Change log??
Click to expand...
Click to collapse
Have a look at Seraphs thread, but SELinux is permissive again (he explains there why). If you want a full changelog of CM, look at https://www.cmxlog.com/14.1/.
Sorry to all but I had to take down the latest build, the alert slider isn't working there. As soon as it's fixed, I'll recompile and reupload. Thanks @KarlDieter for finding this!
dansou901 said:
Sorry to all but I had to take down the latest build, the alert slider isn't working there. As soon as it's fixed, I'll recompile and reupload. Thanks @KarlDieter for finding this!
Click to expand...
Click to collapse
Damn, I just flashed it too lol
Can I dirty flash the Uber version over regular seraph's CM?
Edit: I tried, seems to be working so far.
knpk13 said:
Can I dirty flash the Uber version over regular seraph's CM?
Edit: I tried, seems to be working so far.
Click to expand...
Click to collapse
Thanks for trying out, does everything work for you? I did a clean flash myself, so I can't tell.
What are the advantages of these builds over the official ones? Only UberTC?
Claudiosvs said:
What are the advantages of these builds over the official ones? Only UberTC?
Click to expand...
Click to collapse
It's the sources by Seraph08 and UberTC.
New build is there, thanks @Seraph08 again for the help!
dansou901 said:
New build is there, thanks @Seraph08 again for the help!
Click to expand...
Click to collapse
Please also update the thread title (date). Because otherwise we dont know when there are updates available.
thx
bani1994 said:
Please also update the thread title (date). Because otherwise we dont know when there are updates available.
thx
Click to expand...
Click to collapse
Done, thanks for the hint
New build is up!
Sorry for the noob question but... what are the advantages to use a UBER compiled ROM instead of another one?
aroblu94 said:
Sorry for the noob question but... what are the advantages to use a UBER compiled ROM instead of another one?
Click to expand...
Click to collapse
It boosts up the performance a bit and it's smoother.
dansou901 said:
It boosts up the performance a bit and it's smoother.
Click to expand...
Click to collapse
Well, so why someone still uses another compiler?
Thanks for the answer