Related
I have a dead xda II when trying to upgrade the rom.....I have tryed again and again but I get the same error " This application has failed to start becuase RAPI.dll was not found. RE-installing the allplication may fix this problem" any help tonight would be most appreciated I need this thing running again!!!!
I have the v0.23 that shows up and serial let me know what you can do
Re: Dead xda II when I try upgrade I get an error please hel
yekrahs said:
I have a dead xda II when trying to upgrade the rom.....I have tryed again and again but I get the same error " This application has failed to start becuase RAPI.dll was not found. RE-installing the allplication may fix this problem" any help tonight would be most appreciated I need this thing running again!!!!
I have the v0.23 that shows up and serial let me know what you can do
Click to expand...
Click to collapse
try to put your dead guy to boot loader mode by press & hold power button + navigation button + soft reset hole. What you see then on xda screen?
It says htc engineering serial at top.......v0.23 at the bottom any help let me know thanks
yekrahs said:
It says htc engineering serial at top.......v0.23 at the bottom any help let me know thanks
Click to expand...
Click to collapse
now connect your xda to pc using your cradle or usb cable. The serial text should change to usb. If so, try to run the upgrade again.
Hope it works
hello, greetings to all, I have a X10i, and it will install universalroot change the original numbering system for the Norse to upgrade to 2.1 when the numbers change and reset the phone tells me it should be closed forcibly Timescape, I try to upgrade to 2.1 pc companion error and tells me never recognizes the phone, and SEUS says I have the latest software, trarto of restauralor from the phone and I get error, open the market and I get error any program I run. restore it to factory settings and I get the same error, I went to the model information and tells me I have the firmware 1.6 but the model number which came out before I get one now X10i unkonwn is as if he had model now tell me I hope your help to do, ah another thing I can not install any program from mobile
When you editted the numbers when you were trying to upgrade you didn't enter the right numbers or you changed something else which you weren't meant to.
There is some amounst the may threads a solution to this which bin4ary made. I'll see if I can find it and point you in the right direction....
Sent from my X10i using XDA App
I'm sorry I can't seem to find it. My advice is send bin4ry a PM and hopefully he can find the right info for you.
Sent from my X10i using XDA App
thanks friends
nuncar21 said:
thanks friends
Click to expand...
Click to collapse
No worries. The problem is where some of the threads get so long tryng to find proper news and useful stuff gets mixed in with all the other stuff too.
Sent from my X10i using XDA App
Run this which will update you to 2.1 - http://forum.xda-developers.com/showthread.php?t=825675
XperiaX10iUser said:
Run this which will update you to 2.1 - http://forum.xda-developers.com/showthread.php?t=825675
Click to expand...
Click to collapse
and tell us how you go with it!
hello friends probe through the tutorial and download the program but when I run the program x10flashbat and asks me to connect the phone in flash mode and press any key to continue when I make that step completely closes the program that I can do
nuncar21 said:
hello friends probe through the tutorial and download the program but when I run the program x10flashbat and asks me to connect the phone in flash mode and press any key to continue when I make that step completely closes the program that I can do
Click to expand...
Click to collapse
Reread the guide carefully, and try again.
hello friends I have read all topics and I have tried everything, when I run the regedit in windows and put "Vid_0fce & Pid_adde" I do not see the DeviceInstance try putting "USB \ VID_0FCE & PID_ADDE" and I do not see anything I have Windows 7 32bit everything I've done with the phone plugged into debug mode but nothing that I get something, and when I run the file if you put nothing opens and when I plug in flash that I close the program
You have to have SEUS installed and PC Companion.. run it through PC companion once. Then do the regiedit thing.
To put your phone into flash mode, turn off the phone completely, then hold the back button and connect the phone through USB to the computer.
(when you do this, make sure PC companion is NOT running)
I rooted my LG L86c Optimus Showtime. I uninstalled some random app that came with it and I could uninstall with a special app like Twitter and Google Play Movies. Now I get "Secure Booting Unsuccessful Cause: errorlogo" I found that Google Play Movies has some DRM stuff in it that the phone checks for when it boots, and if it is not there, it fails the security test, and does not boot. I need help trying to get my phone in working order. Please ANYONE help me through this step by step. Just bought this phone and now it's a brick.
Edit: I was able to get it to the "Download is in progress. Do not disconnect cable." screen if that helps. I also downloaded the original .cab file for my phone with the app on this thread http://forum.xda-developers.com/showthread.php?t=1073827 I just don't know what to do with it all.
Please someone help. I spent the only money I had on this phone and now it's a paper weight. I use this for my job
hi i also get the secure booting unsuccessful error when booting my lgl86c
i have downloaded the original firmware using the download app
am currently trying to flash with the lg software update rdz tool
but keep getting loadlibrary error(126)
can sum1 please assist us
thanx
DigitalRenegade said:
I rooted my LG L86c Optimus Showtime. I uninstalled some random app that came with it and I could uninstall with a special app like Twitter and Google Play Movies. Now I get "Secure Booting Unsuccessful Cause: errorlogo" I found that Google Play Movies has some DRM stuff in it that the phone checks for when it boots, and if it is not there, it fails the security test, and does not boot. I need help trying to get my phone in working order. Please ANYONE help me through this step by step. Just bought this phone and now it's a brick.
Edit: I was able to get it to the "Download is in progress. Do not disconnect cable." screen if that helps. I also downloaded the original .cab file for my phone with the app on this thread http://forum.xda-developers.com/showthread.php?t=1073827 I just don't know what to do with it all.
Click to expand...
Click to collapse
If your rooted you could always try and push the apk you removed back with adb.
Sent from my LG-LS970 using xda app-developers app
LG Optimus Showtime Boot Problems
DigitalRenegade said:
I rooted my LG L86c Optimus Showtime. I uninstalled some random app that came with it and I could uninstall with a special app like Twitter and Google Play Movies. Now I get "Secure Booting Unsuccessful Cause: errorlogo" I found that Google Play Movies has some DRM stuff in it that the phone checks for when it boots, and if it is not there, it fails the security test, and does not boot. I need help trying to get my phone in working order. Please ANYONE help me through this step by step. Just bought this phone and now it's a brick.
Edit: I was able to get it to the "Download is in progress. Do not disconnect cable." screen if that helps. I also downloaded the original .cab file for my phone with the app on this thread http://forum.xda-developers.com/showthread.php?t=1073827 I just don't know what to do with it all.
Click to expand...
Click to collapse
Could you please tell me how to get your LG Optimus Showtime L86C into the downloading mode. I have searched everywhere and can't get the information that I need. I have the same problem you do. Have you gotten your issues solved yet?
Hate to deviate, but I've been trying to find the drivers so that I can root my showtime but can't find them. Do you have a link?
Sent from my LGL86C using xda app-developers app
desert54 said:
If your rooted you could always try and push the apk you removed back with adb.
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
that wouldn't work.
when the phone is bricked like that, there's only two things you can do
go into emergency download mode, which not even LGs software repair tool can receognize
or make it reset itself to factory defaults, which also doesn't work because it doesn't put apps that aren't meant to be deleted back.
i know, i did this to my phone on accident and i had to buy a entirely new phone, because apparently this phone only exists on two message boards with very, very little posts or information.
I too have the exact same thing happening to me.
I have tried everything. In fact, I am willing to ship this phone to anyone out there to see if they can fix it.
Has anyone had any luck finding a fix to this yet?:crying::crying::crying:
Did you try hard reset? Usually in Lg Phones is hold power button + home button + volume up until the screen goes black and then release the power button. Keep holding the volume and home until you are in recovery.
Well, the thing about this phone is from what I have found is there are only 2 different screens that you can enter.
One screen is by pressing Power-Vol Down-Home and hold them down until a screen appears that says:
"Permanently Erase User Data & Reset Settings Press Power key to confirm, and any other key to cancel"
The other screen is by connecting the phone to the computer with a USB cable while holding down both Volume Up and Volume Down.
I have not been able to get any other screens to appear by any other means.
If I do the first above screen and let it go, the Android guy appears and it looks to begin to work, but when it goes away, the phone reboots and goes back to giving the error screen "Secure Booting Unsuccessful Cause: ErrorLogo".
Do you have any other suggestions?
peteyallison said:
Well, the thing about this phone is from what I have found is there are only 2 different screens that you can enter.
One screen is by pressing Power-Vol Down-Home and hold them down until a screen appears that says:
"Permanently Erase User Data & Reset Settings Press Power key to confirm, and any other key to cancel"
The other screen is by connecting the phone to the computer with a USB cable while holding down both Volume Up and Volume Down.
I have not been able to get any other screens to appear by any other means.
If I do the first above screen and let it go, the Android guy appears and it looks to begin to work, but when it goes away, the phone reboots and goes back to giving the error screen "Secure Booting Unsuccessful Cause: ErrorLogo".
Do you have any other suggestions?
Click to expand...
Click to collapse
Well from what i know ( i am not an expert and far from one ) is that the security check on boot fails because it can't find all the original files you had in the ROM. Did you try to reset setting on the Power-Vol down-Home? This will destroy all your data and it can't be recovered. If this does not work i think the only way is to go in the emergenc mode and flash stock rom ( the one with usb cable). I will look into this a little more but i don't have the phone. Anyway if you can't boot you lost phone data. Try that reset and tell me what happens.
Thank you for your quick responses.
When I do the Power-Vol down-Home, this is what happens:
the Android guy appears and it looks to begin to work, but when it goes away, the phone reboots and goes back to giving the error screen "Secure Booting Unsuccessful Cause: ErrorLogo"
I really appreciate everything you are trying to do to help me!!
I have used the Original LG Firmware tool located here "http://forum.xda-developers.com/showthread.php?t=1073827" which is the only place that I can find the ROM for this phone anywhere on the internet, but for whatever reason, I cannot flash the phone.
I am really tired of trying. I'm so tired of messing with this phone. I'm almost ready to throw it in the trash.
peteyallison said:
Thank you for your quick responses.
When I do the Power-Vol down-Home, this is what happens:
the Android guy appears and it looks to begin to work, but when it goes away, the phone reboots and goes back to giving the error screen "Secure Booting Unsuccessful Cause: ErrorLogo"
I really appreciate everything you are trying to do to help me!!
I have used the Original LG Firmware tool located here "http://forum.xda-developers.com/showthread.php?t=1073827" which is the only place that I can find the ROM for this phone anywhere on the internet, but for whatever reason, I cannot flash the phone.
I am really tired of trying. I'm so tired of messing with this phone. I'm almost ready to throw it in the trash.
Click to expand...
Click to collapse
You have a .cab file from that?
Yes, that is correct. It is named "L86CV10a_12.S0a_12.P59289.cab"
That is the only place that I have found on the entire www that I have been able to locate a firmware file for this phone.
peteyallison said:
Yes, that is correct. It is named "L86CV10a_12.S0a_12.P59289.cab"
That is the only place that I have found on the entire www that I have been able to locate a firmware file for this phone.
Click to expand...
Click to collapse
Ah ok. You need to do the following conver the .cab into .kdz. Place your phone in download/emergy mode ( the one you put usb in ). Download lg drivers for your device. Then open Kdz flasher CDMA mode and emergency. Flash the image you converted. It will work i hope.
Here is the only place i found a converter. http://unleashedprepaids.com/printthread.php?tid=7736. Just do what i said up.
I don't really know if it will work for a different phone model. I am out of ideas if this doesn't work sorry. All you have to do is to find a way to flash that .cab from emergency mode or convert it to .kdz then kdz flash using emerngecy. Best of luck. Have a nice evening!
Yep, I had done this before, but I just did it again. It did this time what it did before.
This is the error message that I get every time that it tries flashing the phone.
[R&D Test Tools Log File]
16:27:34 : Launching SW update
16:27:34 : Unpacking KDZ
16:28:14 : KDZ file extraced
16:28:32 : Files were extracted.
16:28:32 : LGMobileDL Load.
16:28:32 : Port = -1
16:28:32 : Connecting to phone
16:28:48 : Check Phone mode = 1
16:29:11 : Phone type check.......
16:29:40 : LoadLibrary Error(126)
16:29:42 : ===FINISHED===
The LoadLibrary Error(126) is the part it always fails at and I am at a loss.
Thank you so much for all of your help!
peteyallison said:
Yep, I had done this before, but I just did it again. It did this time what it did before.
This is the error message that I get every time that it tries flashing the phone.
[R&D Test Tools Log File]
16:27:34 : Launching SW update
16:27:34 : Unpacking KDZ
16:28:14 : KDZ file extraced
16:28:32 : Files were extracted.
16:28:32 : LGMobileDL Load.
16:28:32 : Port = -1
16:28:32 : Connecting to phone
16:28:48 : Check Phone mode = 1
16:29:11 : Phone type check.......
16:29:40 : LoadLibrary Error(126)
16:29:42 : ===FINISHED===
The LoadLibrary Error(126) is the part it always fails at and I am at a loss.
Thank you so much for all of your help!
Click to expand...
Click to collapse
Yeah that error is from bad conversion it is missing some dll info or some info that should be there from conversion this is your problem. I cannot help from here i don't know to make dll's for a phone. Maybe someone else can best of luck. I am sorry for your phone!
Stuck at 'Download in progress. Do not disconnect cable.'
Well, I tried to root my LG Optimus Showtime using the information I found here but, unfortunately, once it was rooted, it rebooted about 5 minutes later on it's own and is now stuck in 'Download is in progress. Do not disconnect cable.' at boot. I can't get it to be recognized when I connect it to the PC (it's not currently plugged into anything, though it says don't disconnect the cable). I have tried every key combo and trick I can find.
Please, for the love of all things Andriod, PLEASE someone help me figure this out. I don't have another cell and can't afford to buy a replacement anytime soon.
The root seemed to go smoothly. Super-user, Poot, reboot, no problem and then, 5 minutes later, it rebooted itself and has been stuck ever since.
Please tell me someone has SOME idea what I can do?
I have tried about a dozen times to flash with the kernel tool I got from on here but as far as I can tell, the PC doesn't actually 'see' the phone anymore when I plug in the USB cable and connect it to the PC. The LG mobile software update tool doesn't recognize/read it's state, nor does the LG Flash tool I got from here. Neither one 'recognizes' the phone and therefore, it won't 'take' a flash.
I am open to trying anything to fix it, even sending it so someone if they think they can get it back to root or stock; I don't care which as long as it isn't a paperweight!
Any ideas?
Thank you in advance!
Fixing bricked showtine
mellie815 said:
Well, I tried to root my LG Optimus Showtime using the information I found here but, unfortunately, once it was rooted, it rebooted about 5 minutes later on it's own and is now stuck in 'Download is in progress. Do not disconnect cable.' at boot. I can't get it to be recognized when I connect it to the PC (it's not currently plugged into anything, though it says don't disconnect the cable). I have tried every key combo and trick I can find.
Please, for the love of all things Andriod, PLEASE someone help me figure this out. I don't have another cell and can't afford to buy a replacement anytime soon.
The root seemed to go smoothly. Super-user, Poot, reboot, no problem and then, 5 minutes later, it rebooted itself and has been stuck ever since.
Please tell me someone has SOME idea what I can do?
I have tried about a dozen times to flash with the kernel tool I got from on here but as far as I can tell, the PC doesn't actually 'see' the phone anymore when I plug in the USB cable and connect it to the PC. The LG mobile software update tool doesn't recognize/read it's state, nor does the LG Flash tool I got from here. Neither one 'recognizes' the phone and therefore, it won't 'take' a flash.
I am open to trying anything to fix it, even sending it so someone if they think they can get it back to root or stock; I don't care which as long as it isn't a paperweight!
Any ideas?
Thank you in advance!
Click to expand...
Click to collapse
The only thing you can do that I was able to do is to replace the mainboard. It takes about 10 minutes tops. go to phonepartsusa dot com and search for parts to the LG Venice, LG US730. The main board is less then $10. Then you have to deal with a new ESN. I was able to get a Showtime ie straight talk, mainboard for $8, I installed it and tried to activate it with the new ESN and it worked. Might be worth the $10 bucks.
Nos
I tried installing couple of custom roms and i dont know what went wrong, but now i am not getting mobile signal. No IMEI on the device. i tried installing IMEI using the following method but its not working. can some one help me out please.
I tried insering IMEI by following steps which i saw in some other site
1. Rooted your MTK Android phone
2. Download and install Mobile Uncle Tools from Google play store.
3. Go to Engineer Mode and Select Engineer mode (MTK)
4. Go to Connectivity Tab and Select CDS information
5. Select Radio Information after that Select Phone1 (for the first IMEI)
6. At the top there is a command line which begins “AT+” just type there “AT +EGMR=1,7,”IMEI_1″ (Put your first IMEI number number)
7. Hit send command and you will / may get a confirmation that "sent to mSend".
8. Now go back and select “Phone2″ (for the second IMEI number)
9. At the top there is a command line which begins “AT+” just type there “AT +EGMR=1,10,”IMEI_2″ (Put your second IMEI number)
10. Reboot your phone and check you IMEI number (Dial *#06#).
Click to expand...
Click to collapse
Pls can some one help me out urgently
AnilLonely said:
I tried installing couple of custom roms and i dont know what went wrong, but now i am not getting mobile signal. No IMEI on the device. i tried installing IMEI using the following method but its not working. can some one help me out please.
I tried insering IMEI by following steps which i saw in some other site
Pls can some one help me out urgently
Click to expand...
Click to collapse
It's better flash a new ROM using SPFlash Tools.
Yupp flashing stock firmware will solve your prob
Minimilised_MR said:
It's better flash a new ROM using SPFlash Tools.
Click to expand...
Click to collapse
thanks i solved the issue.i was having issue while flashing.thought that some one could help.but somehow i was able to get MT6577 USB VCOM drivers.previously i didnt have these and nothing is happening with flash tool.After installing these i was able to go through the flashing procedure and could solve the issue.
Thanks to all those who helped me in solving the issue.
Bro Help Me
AnilLonely said:
thanks i solved the issue.i was having issue while flashing.thought that some one could help.but somehow i was able to get MT6577 USB VCOM drivers.previously i didnt have these and nothing is happening with flash tool.After installing these i was able to go through the flashing procedure and could solve the issue.
Thanks to all those who helped me in solving the issue.
Click to expand...
Click to collapse
:crying:
Bro I am Also Having the Problem Please help me.
please tell me in step bro please
aravindanxda said:
:crying:
Bro I am Also Having the Problem Please help me.
please tell me in step bro please
Click to expand...
Click to collapse
1. Download stock rom
2. Remove battery from ur mobile.
4. Open SP flashtool and browse file named( by clicking Scatter loading tab) "MT6589_Android_scatter_emmc.txt" which will be in the downloaded stock rom.
5. Click on Donload button
6. Connect mobile to ur desktop.
7.wait for the SP flashtool to recognise ur mobile and start flashing.
8. Once everything is done, u will have a green circle with text OK on it.
9. Remove mobile insert battery and start using it.
Check the following link for detailed explanation
HTML:
http://forum.xda-developers.com/showthread.php?t=1982587
IMEI loss radio state off
Hi,
Yesterday afer root of my mmx magnus a117, I tried to install recovery with help of TWRP manager but after that I face issue of my network signal, this is due to loss IMEI, so I tried to slove this issue with help of mobileunkle tool to go in engineer mode to feed IMEI no but its not working, as it show my Radio state off.
My phone SIM managment is also got inactive ( greyed out ).
Please can some one help me on this....
Hello everyone,
Before reading this, please be advised that I have read every topic related to this phone and tried everything (step by step) but I couldn't find any solution yet for the problem I have, so here it is:
Bought this phone one year ago and I'm very pleased about his performance. Yet, some months ago i might flash a ROW ROM version - I didn't had any clue what I'm doing - and the problems started...
Since one month, I'm flashing my phone every day trying to get it work but without success phone is Lenovo P780 CMIIT ID : 2013CP5888 - I assume it is made in 2013 and the details on the back are written in chinese.
The problem : all apps crash after installing stock rom (china version) and once the phone is off it won't boot (after repeatedly pressing the red button sometimes it starts). Every time after flashing it works for a few hours then it stops (freezes/restarts and keeps the logo picture untill I press the red button under the back cover)
My last flashing attempt (few hours ago):
Step 1. I have installed P780_S129_130710 ROM with SP flash tool
Step 2. I have installed LiFe_v07 4GB CHINESE ROM with SP flash tool
Phone is off now, I can't boot it since some hours and have left it to charge.
PS: i have all the drivers for flashing correctly installed
I'm very frustrated because i'm having the same every day and I can't seem to solve it yet. If someone would guide me through solving it I would be very happy :good::fingers-crossed:
Update:
Just flashed again the step 2 ROM, here is the SS of current ROM version
Sent from my Lenovo P780 using XDA Free mobile app
Awthentik_87 said:
Update:
Just flashed again the step 2 ROM, here is the SS of current ROM version
Sent from my Lenovo P780 using XDA Free mobile app
Click to expand...
Click to collapse
Can you flash Baralabi KitKat firmware? Or do you want JellyBean ?
Hi Stympy,
To be honest, I just want my phone to work (without any app crashes)
I would try any Roms if stable enough, I'm just tired of flashing all day
Sent from my Lenovo P780 using XDA Free mobile app
Awthentik_87 said:
Hi Stympy,
To be honest, I just want my phone to work (without any app crashes)
I would try any Roms if stable enough, I'm just tired of flashing all day
Sent from my Lenovo P780 using XDA Free mobile app
Click to expand...
Click to collapse
Can you establish a team viewer connection ? PM me if you can !
stympy said:
Can you establish a team viewer connection ? PM me if you can !
Click to expand...
Click to collapse
Yes I can, I'll pm you in about 1h if u are around and available
Awthentik_87 said:
Yes I can, I'll pm you in about 1h if u are around and available
Click to expand...
Click to collapse
I'm here for like 2-3h more
Also I think I can't PM you...
Awthentik_87 said:
I'm here for like 2-3h more
Also I think I can't PM you...
Click to expand...
Click to collapse
I am here now ! I will be afk in one hour! family business !
Hi @stympy,
I would like to take a moment to "Thank you !" " for all your efforts while sharing all these posts on Lenovo P780 forum.
Few days back, I faced an issue during rooting my P780 and phone went to "Charging light ON rest NOTHING" condition.
I referred numberous posts and solutions on this forum and then found a way of flashing stock ROM using SPFlashtool.
I was using Windows 10 on my laptop and SPFlashtool didn't worked well (tried v3 & v5).
The reason being, due to "Driver signature verification" as it didn't allowed to load mediatek driver.
Once I disabled it, the flashing tool work flawlessly and I was able to bring the phone back to life.
I spent around 2 days troubleshooting this issue. While searching solutions for this issue, I came across your MANY posts which were very helpful.
So, I would like to THANK YOU from bottom of my heart for being so much active while helping others on this platform.
Keep up the great work !! Have a great time ahead. !
way2shree said:
Hi @stympy,
I would like to take a moment to "Thank you !" " for all your efforts while sharing all these posts on Lenovo P780 forum.
Few days back, I faced an issue during rooting my P780 and phone went to "Charging light ON rest NOTHING" condition.
I referred numberous posts and solutions on this forum and then found a way of flashing stock ROM using SPFlashtool.
I was using Windows 10 on my laptop and SPFlashtool didn't worked well (tried v3 & v5).
The reason being, due to "Driver signature verification" as it didn't allowed to load mediatek driver.
Once I disabled it, the flashing tool work flawlessly and I was able to bring the phone back to life.
I spent around 2 days troubleshooting this issue. While searching solutions for this issue, I came across your MANY posts which were very helpful.
So, I would like to THANK YOU from bottom of my heart for being so much active while helping others on this platform.
Keep up the great work !! Have a great time ahead. !
Click to expand...
Click to collapse
Hi there!
I am glad that my advices or any post helped you!
And you are wellcome! :good:
PLZ HELP!!!
Hi guys,
I have been using lenovo P780 since last 1 year. Last month I recieved an update to kitkat for stock rom, after which the phone went haywire. No range for mobile, battery life reduced drastically and many more issues. After a month of going through all this i decided to downgrade to jellybean again.
I did the procedure i found in one of the post here and flashed the stock rom for jellybean 3 days ago. The phone still had issues with Mobile range. But since yesterday night it would not BOOt up. Guys please help...!!!!
yokunal said:
Hi guys,
I have been using lenovo P780 since last 1 year. Last month I recieved an update to kitkat for stock rom, after which the phone went haywire. No range for mobile, battery life reduced drastically and many more issues. After a month of going through all this i decided to downgrade to jellybean again.
I did the procedure i found in one of the post here and flashed the stock rom for jellybean 3 days ago. The phone still had issues with Mobile range. But since yesterday night it would not BOOt up. Guys please help...!!!!
Click to expand...
Click to collapse
Hi. Go to development section.
There you will find stock firmware for your phone 8 or 4 gb. Download the one you need.
After download go to q&a section on rooting tutorial for kitkat and download spflah tools 3 an 5. Those are the tools recommended for this phone. Those are modified tools for Lenovo P780. Download. Be careful to check if your NVRAM is intact. Settings/about phone. Look in IMEI area and see if your IMEI is there.
If not this is another problem to solve.
If your IMEI is lost look for my post tools for recovery IMEI.
Good luck.
Sent from my Lenovo P780
stympy said:
Hi. Go to development section.
There you will find stock firmware for your phone 8 or 4 gb. Download the one you need.
After download go to q&a section on rooting tutorial for kitkat and download spflah tools 3 an 5. Those are the tools recommended for this phone. Those are modified tools for Lenovo P780. Download. Be careful to check if your NVRAM is intact. Settings/about phone. Look in IMEI area and see if your IMEI is there.
If not this is another problem to solve.
If your IMEI is lost look for my post tools for recovery IMEI.
Good luck.
Sent from my Lenovo P780
Click to expand...
Click to collapse
Hey thanks so much for the prompt reply.
For NVRAM issue how do I see that... my phone doesn't boot up. How to check for IMEI no then???
yokunal said:
Hey thanks so much for the prompt reply.
For NVRAM issue how do I see that... my phone doesn't boot up. How to check for IMEI no then???
Click to expand...
Click to collapse
You cannot check now. You must flash firmware again.
stympy said:
You cannot check now. You must flash firmware again.
Click to expand...
Click to collapse
Hi Good Morning,
Thanks for all the help dude. But am facing an altogether different issue here. My phone is not being detected in the PC itself. Sorry but I am a noob in all this. I did read all your post for rooting & NVRAM also. Please guide forward.
HiI have looked for all the posts here with same issue.
My phone mfg date is march-2014. I tried using Flash tools to flash
but it doesn't give any response for 8gb stock rom
But as soon as i connect the device after downloading all the files there is no response
the bar stays at 0% saying searching only.
Have i bricked my phone????????
yokunal said:
HiI have looked for all the posts here with same issue.
My phone mfg date is march-2014. I tried using Flash tools to flash
but it doesn't give any response for 8gb stock rom
But as soon as i connect the device after downloading all the files there is no response
the bar stays at 0% saying searching only.
Have i bricked my phone????????
Click to expand...
Click to collapse
No. You did not brick your phone.
You must reinstall the drivers.
Before reinstalling drivers try this: when you flash the phone you must press red small button located on the back of the phone under the back case, metal back case. Start spflash tool, load scatter file, select firmware upgrade, press download and now press the small red button for 20 seconds. Tell me what is going on.
Sent from my Lenovo P780
stympy said:
No. You did not brick your phone.
You must reinstall the drivers.
Before reinstalling drivers try this: when you flash the phone you must press red small button located on the back of the phone under the back case, metal back case. Start spflash tool, load scatter file, select firmware upgrade, press download and now press the small red button for 20 seconds. Tell me what is going on.
Sent from my Lenovo P780
Click to expand...
Click to collapse
I did try this. THanks. But the problem i am facing now is once I connect my phone to the PC no device is detected in the Device manager.
yokunal said:
I did try this. THanks. But the problem i am facing now is once I connect my phone to the PC no device is detected in the Device manager.
Click to expand...
Click to collapse
Try this:
1. Open device manager
2. Leave the window open
3. Power down the phone
4. Plug the phone to your USB cable
5. Look now on device manager window on ports section
6. In ports section will appear something like MTK 6.5.x.x preloader or MTK 6.5.9.2 com port x, where x is a port number.
7. This thing will appear for max 2 seconds, then will disappear.
8. Tell me what you have there so i know what you have to do.
Sent from my Lenovo P780
stympy said:
Try this:
1. Open device manager
2. Leave the window open
3. Power down the phone
4. Plug the phone to your USB cable
5. Look now on device manager window on ports section
6. In ports section will appear something like MTK 6.5.x.x preloader or MTK 6.5.9.2 com port x, where x is a port number.
7. This thing will appear for max 2 seconds, then will disappear.
8. Tell me what you have there so i know what you have to do.
Sent from my Lenovo P780
Click to expand...
Click to collapse
Did above all steps...
Got a message saying all drivers are upto date
Then Opened SPFT v5
Loaded the scatter file
pressed download
Also connected the USB at same time
Now it gives error saying(" BROM Undetected rom ")
Update :
Hi the phone started
All i did was just change to download in SPFT v5 & it worked voila...
The IMEI number is still intact, It does show in settings of the phone..
The only problem i have now is i dont have a WLAN MAC address ,Bluetooth address & IP address in the status in settings
Update:
The phone now as i have tested so far does not have any range for the mobile network
Phone memory & sd card is though showing properly.
What course of action to be taken forward. Kindly advice.