Because this isn't a main stream phone, from what I can see, the choice of cases out there are really slim.
I bought a cheap case off ebay, which is ok, but i'm not terribly happy with. The case is from taipo212 on ebay, the 'rubber hard coating skin case'. It fits well and looks pretty good initially, but marks too easily due to the matte/rubber like material. It also came with a couple small marks already on it. However, I needed a case till I find the perfect case, and it was cheap.
I'm waiting on another case from ebay, which I will comment on when I receive it. A 'clear hard tough case' from 'yousave-au'. Would love to hear from anyone that has this already.
I couldn't find a generic cases thread for the mega 6.3, so I think this thread would be a big help to lots of people.
Can anyone who has a case comment on if the case is good, where you got it from etc, even people with bad experiences, if they can let us know, so we know what cases to avoid
I just ordered one of these from eBay UK for £1.99 with free screen protector. I like these ones as they are cheap and durable, it protects the whole phone and I have been using the same type of case for my Nexus 7, Original Note, Lg L3, and Galaxy Tab 2 7.0 with no problems.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
There are lots of generic cases available for the Mega 6.3 and in my experience they are quite good. Here are some ultra thin ones, I have tried this type of case on my original Note but didn't like it as the top and bottom of the phone are exposed to scratches.
These ones are advertised as Hydro Gel Rubber, whatever that means. I have also tried this with my original Note but after a few months it became loose and I went back to the S Line type case.
I use the S-Line and like it alot.
The phone is still slim and the texture is such that it doesnt hang up inside your pants front pocket when I pull it out..
Comes out and goes in smooth and is not slippery feeling like it will squirt out of my hand..
Im impressed. Just the features that I like..
EXCEPT.... one gripe.. I want the button covers removed. I want to feel and press the actual button and not the rubber button bumper..
I have a NillKin snap-on hard case (in black) for mine. This is quickly becoming my case of choice for all my phones - it's classy and maintains the thin waistline. It doesn't provide all-round edge protection though, so you need to be a bit more careful I also have a generic snap-on clear case, which looks alright but sits hard against some patches of the back, making it look a little cheap lol.
@gx3k can you please share the ebay link you order these cases from
Warnahly said:
@gx3k can you please share the ebay link you order these cases from
Click to expand...
Click to collapse
These are some slim/flip cases available on eBay UK (click on the pics for the link):
Ordered this one for £11.99 with the usual 'free' screen protector and stylus http://www.amazon.co.uk/SAVFY-Samsu...UTF8&colid=2CUOJPFBQAJ7A&coliid=IO8B31VIVJJN5
It looks ok and will do till something better comes along.
I like the TPU plastic cover. It protect my phone some time when I drop it.
Troute said:
Ordered this one for £11.99 with the usual 'free' screen protector and stylus http://www.amazon.co.uk/SAVFY-Samsu...iew cutout and also without the magnet flap..
Click to expand...
Click to collapse
cheap mega 6.3 leather case
leetrevor81 said:
Because this isn't a main stream phone, from what I can see, the choice of cases out there are really slim.
I bought a cheap case off ebay, which is ok, but i'm not terribly happy with. The case is from taipo212 on ebay, the 'rubber hard coating skin case'. It fits well and looks pretty good initially, but marks too easily due to the matte/rubber like material. It also came with a couple small marks already on it. However, I needed a case till I find the perfect case, and it was cheap.
I'm waiting on another case from ebay, which I will comment on when I receive it. A 'clear hard tough case' from 'yousave-au'. Would love to hear from anyone that has this already.
I couldn't find a generic cases thread for the mega 6.3, so I think this thread would be a big help to lots of people.
Can anyone who has a case comment on if the case is good, where you got it from etc, even people with bad experiences, if they can let us know, so we know what cases to avoid
Click to expand...
Click to collapse
I purchased a cheap leather mega 6.3 stand case on Amazon uk - 4 colors available : black white blue green grey pink, just search "allreli mega 6.3 case" on Amazon uk
Got my new case today,it's extra slim
gx3k said:
Got my new case today,it's extra slim
Click to expand...
Click to collapse
I like your case... I also like how the button holes are cut out exposing the buttons.
I have a TPU case like yours but the buttons are covered.
Where did you get your case??
Can you link us to your sweet case...
Is it flexible, TPU or a stiff plastic??
thanks...
jimmbomb said:
I like your case... I also like how the button holes are cut out exposing the buttons.
I have a TPU case like yours but the buttons are covered.
Where did you get your case??
Can you link us to your sweet case...
Is it flexible, TPU or a stiff plastic??
thanks...
Click to expand...
Click to collapse
Click the photo for the link:
It's stiff plastic for only £1.29 but it's from Hong Kong so it takes weeks to arrive.
I have the Poetic Atmosphere Case, very nice fit and looks great!
http://www.amazon.co.uk/gp/product/B00DH9AAV0/ref=oh_details_o02_s00_i00?ie=UTF8&psc=1
Just got one of these http://www.ebay.co.uk/itm/290945411155
The "Army Green" version, it's really a very dark brown like oiled leather or hunter leather. It has the same look and feel as a wallet I bought from Amazon UK (Visconti Hunter) though of course it's not leather.
There's no go to sleep magnet in it but that was easily fixed. It's a third of the price of the last case I bought and feels much nicer in the hand, the inner phone holder part is hard plastic not tpu and is open at either end with cut outs for the volume and power buttons.
Troute said:
Just got one of these http://www.ebay.co.uk/itm/290945411155
The "Army Green" version, it's really a very dark brown like oiled leather or hunter leather. It has the same look and feel as a wallet I bought from Amazon UK (Visconti Hunter) though of course it's not leather.
There's no go to sleep magnet in it but that was easily fixed. It's a third of the price of the last case I bought and feels much nicer in the hand, the inner phone holder part is hard plastic not tpu and is open at either end with cut outs for the volume and power buttons.
Click to expand...
Click to collapse
I have got one and while it is very good it worn quite quickly and will no longer "stand" up in landscape mode. I paid about $9 and am happy with I got.
ROCK M6.3 case is good choice, the classic s view flip cover with a replacement hard PC battery cover for the official plastic....
http://www.galaxymegacase.org/samsu...leather-cover-case-for-galaxy-mega-6-3-black/
Does it actually keep the display on all the time?
juzz86 said:
I have a NillKin snap-on hard case (in black) for mine. This is quickly becoming my case of choice for all my phones - it's classy and maintains the thin waistline. It doesn't provide all-round edge protection though, so you need to be a bit more careful I also have a generic snap-on clear case, which looks alright but sits hard against some patches of the back, making it look a little cheap lol.
Click to expand...
Click to collapse
I have ordered a brown Nillkin for my white Mega.
Got my new case today, same as my blue ultra slim case but I got black.
Related
I've seen quite a few reviews / post on the SGP NeoHybrid series cases but nothing on the Linear Color series, thus I figured I'd post some quick photos and share my comments.
After several reviews on how the NeoHybrid series sags after while I decided to stay away from that model and try the Linear Color series. I found out the frame is of the same material as the NeoHybrid, just the back is different / hard plastic. I wanted a two-tone look, thus ended up ordering 2 cases, one in Silver and one in Black. First let me say I absolutely LOVE these cases. I think the look is absolutely gorgeous and the fit is spot on. I read reviews about the back being loose on the international version of the SG2 but this is not the case with our model. There is absolutely no movement of the back case. The cases are also a little different between the Black and Silver. The Black has a high gloss while the Silver has a bit of a flat texture to it. This works well with the combo of the cases as you don't have a full slippery phone with the all black and you have nice break in the texture with introducing the gloss black to the silver case. Overall I would highly recommend this case. The picture I have do not do the cases justice. Additionally these cases include the Ultra Crystal screen protector which is installed in the pictures.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thank you for the review. Can you confirm if the case covers the top mic? Also, how well does the side piece fit the phone? Is a youtube review it looked like the side piece was bowing out a bit so every time the buttons were pressed, the case would clearly flex.
Wow those cases look sweet. Thanks for the info.
Sent from my SAMSUNG-SGH-I777 using XDA App
tboooe said:
Thank you for the review. Can you confirm if the case covers the top mic? Also, how well does the side piece fit the phone? Is a youtube review it looked like the side piece was bowing out a bit so every time the buttons were pressed, the case would clearly flex.
Click to expand...
Click to collapse
The case does indeed cover the top mic, however I believe it can easily be fixed by some of the methods described in this forum (hot nail, small drill, etc). I plan to give it a shot on mine this weekend. Will try to post some update pictures with a better camera when I do. As far as the case, there is absolutely no bowing / flexing taking place. If it's the same youtube video I saw, they mentioned they had attempted to put the case on with one of those skins on and that make the case bulge a bit as they forced it on. The two I have fit like a glove and again have no movement of the back plate as described for the international version.
Case
I like the pics, and I am in the market for a case. I am definitely going to check these out.
I got my Linear case today and I must say I like it alot! I go Soul Black which has a glossy finish to it which I prefer. Because of this glossiness, the case can be slippery though but i dont mind. The case has a nice lip on front side so laying the phone face down is no problem. The fit is well done too. With a 3 piece case, I was worried how snug it would fit together. Rest assured, everything feels nice and snug. I also verified my phone, wifi, and gps signals are not negatively impacted by this case , unlike my CaseMate Barely There Aluminum which I also like the look of but could not deal with the greatly degraded gps signal.
My only complaint, and this definitely more of a preference, I wish the lip on the front side was a not so high. Swiping from edge to edge, my finger hits the edge. Its not a big deal though.
Overall, I would recommend this case!
I would get one, but I'm thinking about taking my SGS II back next week for the LG Nitro HD when it comes out. It's nice to know there are some good, reasonably priced cases for this phone, though.
Sent from my SAMSUNG-SGH-I777 using xda premium
tboooe said:
I got my Linear case today and I must say I like it alot! I go Soul Black which has a glossy finish to it which I prefer. Because of this glossiness, the case can be slippery though but i dont mind. The case has a nice lip on front side so laying the phone face down is no problem. The fit is well done too. With a 3 piece case, I was worried how snug it would fit together. Rest assured, everything feels nice and snug. I also verified my phone, wifi, and gps signals are not negatively impacted by this case , unlike my CaseMate Barely There Aluminum which I also like the look of but could not deal with the greatly degraded gps signal.
My only complaint, and this definitely more of a preference, I wish the lip on the front side was a not so high. Swiping from edge to edge, my finger hits the edge. Its not a big deal though.
Overall, I would recommend this case!
Click to expand...
Click to collapse
Hmm...I like my Neo Hybrid case but it's a pain whenever I want to remove it to access the microsd card or when I had to peel off an old screen protector and place a new one one. Been thinking about this case and was wondering if you could post or PM me pics? (Probably gonna go with soul black as well since I don't want to buy a white & black to keep my stormtrooper look -- unless someone's willing to buy the black shell with white backing?)
Thanks!
DefTaker said:
Hmm...I like my Neo Hybrid case but it's a pain whenever I want to remove it to access the microsd card or when I had to peel off an old screen protector and place a new one one. Been thinking about this case and was wondering if you could post or PM me pics? (Probably gonna go with soul black as well since I don't want to buy a white & black to keep my stormtrooper look -- unless someone's willing to buy the black shell with white backing?)
Thanks!
Click to expand...
Click to collapse
Alright I will post some pics later. I will say that removing this case is pretty easy however, I dont think I would advise doing it too many times. There are little clips that attaches the bottom part to the frame. I imagine these clips could wear over time if the case is removed too many times.
tboooe said:
Alright I will post some pics later. I will say that removing this case is pretty easy however, I dont think I would advise doing it too many times. There are little clips that attaches the bottom part to the frame. I imagine these clips could wear over time if the case is removed too many times.
Click to expand...
Click to collapse
Thanks! Yeah, I don't plan on removing the case too often but I'd also like it NOT to be such a PITA when I want to take it off. It's really the only negative thing I ahve to say about the Neo Hybrid case. I wish they offered a white shell w/black backing instead of having to buy 2 different color cases though since they offer the white shell with pink, turquoise, etc. <-- NO black backing, ReaLLY?
are there 2 different versions of this case? galaxy 2 att and international?
cwilliams1983 said:
are there 2 different versions of this case? galaxy 2 att and international?
Click to expand...
Click to collapse
I believe it's the same case - the only difference is that you'll get the correct Steinheil screen protector without the home button cutout that comes with the i9100 (aka international) version. The case itself fits either although since the i9100 is a bit slimmer, the back supposedly wiggles whereas it should fit flush on the i777.
Ugh...so I went ahead decided to get the Infinity White Linear case and got it today...
Sux, it doesn't fit right. The bottom part won't clip into the rest; only one side clips in properly as if the width is not right. I've emailed SGP's customer service so they can RMA and get me a new case (I'm going to be pissed though if they try to charge me for shipping & handling).
I'm really surprised that it doesn't fit. I hope I just got one from a bad batch.
I sent an SGP neohybrid case back on the 14th of november and still waiting on my refund. had to pay for the shipping back.
Jamlx1 said:
I sent an SGP neohybrid case back on the 14th of november and still waiting on my refund. had to pay for the shipping back.
Click to expand...
Click to collapse
Was the product defective (my Neo Hybrid fits fine but I wanted the Linear case for easier access to my microsd card and battery)?
If it was defective, then you shouldn't have to pay to ship it back.
I'll just have to wait and see...don't know what case to get if they don't RMA and send me a Linear case to fit...(thought about the Taurus but don't want the metal case to interfere with GPS).
sent back due to wrong screen protector being sent, and had also read about how the rubber back saged over time. i bought one of the s line cases off ebay for like $5 and it fits perfect and didnt increase the size much.
Jamlx1 said:
sent back due to wrong screen protector being sent, and had also read about how the rubber back saged over time. i bought one of the s line cases off ebay for like $5 and it fits perfect and didnt increase the size much.
Click to expand...
Click to collapse
Ok, then yes it would make sense that they charge you for shipping. But in my situation, the bottom part of the case doesn't fit properly. I'll look at the S line case you mentioned and see how that is. Thanks.
does anyone with the samsung 2000mah battery using with this case WITH the backing on?
Surprising we don't have thread like this for DNA yet.
So its simple. Post photos of your cases, pouches, flip covers, skins with the DNA and also please do post the source / link from where you got it so it can help others to buy the same if they like it.
Cheers! Will post mine soon.
From my Note 2, right in your face....
I need people to post pics so i can get case ideas....
I'll bite.
This is the Incipio Feather Case.
I paid $23, from DayDeal.com. You can find it on Amazon and, for a little less, on eBay. I was able to drive to DayDeal and pick it up, so I saved shipping charges, and didn't have to wait (I can be very patient, as long as I don't have to wait). DayDeal has also treated me very well in the past, so I'm happy to give them my business, even if it costs me a few bucks.
Comes in Gray, Black, Hot Pink and Blue.
If you're looking for the thinnest, lightest case other then simply putting stickers on the back of your DNA, this case is probably it.
I'm not really sure how much protection it'll provide. I do have another case, which I used when I was on a recent trip skiing, but for day to day use, I really like this case! It retains the sleek look and feel of the DNA, even retaining the curved shape of the back of the DNA. Soft touch paint provides a more firm grip in your hand, something that was lacking in the similar Nillkin case I have. I purchased the smooth Nillkin case (they do have one with dots on the back, but I didn't care for how it looks), and always felt like it was about to slip out of my fingers (came close a couple of times)... the Feather case has no such problems!
If you're looking for a case which you can drop your DNA on concrete, and not flinch, this ain't it!
If you're looking to keep your DNA slim and light, while providing some additional protection, especially from scratches to the back... you may want to give this one a look.
Positives:
Soft touch paint
Ultra thin
lightweight
Displays red highlights of the DNA
Inductive charging works fine with case
Negatives:
Top and bottom edges partially exposed
Doesn't provide maximum protection
Power and volume buttons exposed
Back LED concealed
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Nice I'm going to look for that incipio case ASAP but here's my case mate case bought from a Verizon store in NH
Pics we're taken with my retired Gnex
Sent from my HTC6435LVW using xda app-developers app
I have a couple. A standard case with a built in stand. It came with a holster, which i would never use. Purchased directly from Verizon corporate store. It has a nice design that aids in gripping the phone.
Not too much of a lip
I like how designers gave the user a little extra room past the vol up and vol dn rocker
Corner protection leaves much to be desired
Is everyone's flap chipping away like mine? I had to let a fingernail grow out just to pop this thing out
Here's how the back looks with the stand pulled out
Then there is the Otter Box, again purchased from the Verizon store.
The standard 3-piece fare
Finally, fully clothed
This is what I am bummed about.
Lot of nice looking cases, but most dont have cutout for the back notification light
Those that do have it, all look like crap.
Funkym0nkey said:
This is what I am bummed about.
Lot of nice looking cases, but most dont have cutout for the back notification light
Those that do have it, all look like crap.
Click to expand...
Click to collapse
A little quick work with a drill and that can be solved.
My Trident Aegis case has a cutout in the back for the light.
Got the Incipio dual case, ordered direct from Incipio to get the color combo. Was a little worried about grey/electric green with the employee edition red but in natural light it actually looks pretty cool. You can only see it from the back or looking up at the charging port area. I work for VZW so I'm hoping we'll starting carrying these for the DNA like we do for all the other phones so I can pick up a black/black with my discount.
It adds just a bit of bulk, the soft touch is very nice (similar to the feather the guy further up has) The power button is a lot easier now as well. The case tapers with the phone so it still has that nice feel in the hand, just a bit thicker.
Ballistic HTC Droid DNA SG MAXX
White/clear TPU case from eBay on Employee Edition DROID DNA.
Posted from my Verizon Employee Edition DROID DNA #01749.
Poetic Atmosphere Case for HTC Droid DNA
I bought the Poetic Atmosphere Case for HTC Droid DNA from Amazon for $7 and just received it today. It is a really nice case and fits the DNA perfectly. It adds almost no bulk to the DNA while providing average protection for daily use. The Poetic case also accommodates the rear LED notification light. The back of the case is transparent and a bit slippery while the sides are gray. There are raised buttons for the power and volume buttons. Pictures are available on Amazon. Here is the info from Amazon:
Made of polycarbonate and thermoplastic polyurethane
Transparent durable material
Grey borders surround the edges
Customer built-in volume control buttons
Raised knobs on each corner to protect from surface scratches.
Comparing it to the Ballistic SG Case that I'm currently using, It is a much sleeker case, but the Ballistic SG Case offers more protection at the expense of more bulk. The Ballistic SG Case seems to be squeezing the DNA a bit too tightly and might be causing the bluish splotches on the DNA screen. However, I do feel more at ease if the DNA is in the Ballistic case than the Poetic case. I'll post pictures later when I get a chance.
Just did a review of my DNA with the Incipio Faxion. Thread below.
http://forum.xda-developers.com/showthread.php?t=2087153
Incipio Faxion
Sent from my Droid DNA
Picked up a Nillkin hard case for ten bucks off eBay. Usually go for more protection, but this one's done a good job so far. I also didn't want something that put a stack of pressure on the sides of the phone:
Well worth the ten bucks, the included screen protector goes well also.
http://www.ebay.com.au/itm/Nillkin-...AU_MobilePhoneAccessories&hash=item3a7cb95a60
juzz86 said:
Picked up a Nillkin hard case for ten bucks off eBay. Usually go for more protection, but this one's done a good job so far. I also didn't want something that put a stack of pressure on the sides of the phone:
SNIP
Well worth the ten bucks, the included screen protector goes well also.
http://www.ebay.com.au/itm/Nillkin-...AU_MobilePhoneAccessories&hash=item3a7cb95a60
Click to expand...
Click to collapse
Have this case, I like its slim profile.
Seems like you placed the screen protector a tad low, no lifted edges on mine.
Verean said:
Seems like you placed the screen protector a tad low, no lifted edges on mine.
Click to expand...
Click to collapse
Yeah, in a rush
crikeycrapper said:
I bought the Poetic Atmosphere Case for HTC Droid DNA from Amazon for $7 and just received it today. It is a really nice case and fits the DNA perfectly. It adds almost no bulk to the DNA while providing average protection for daily use. The Poetic case also accommodates the rear LED notification light. The back of the case is transparent and a bit slippery while the sides are gray. There are raised buttons for the power and volume buttons. Pictures are available on Amazon. Here is the info from Amazon:
Made of polycarbonate and thermoplastic polyurethane
Transparent durable material
Grey borders surround the edges
Customer built-in volume control buttons
Raised knobs on each corner to protect from surface scratches.
Comparing it to the Ballistic SG Case that I'm currently using, It is a much sleeker case, but the Ballistic SG Case offers more protection at the expense of more bulk. The Ballistic SG Case seems to be squeezing the DNA a bit too tightly and might be causing the bluish splotches on the DNA screen. However, I do feel more at ease if the DNA is in the Ballistic case than the Poetic case. I'll post pictures later when I get a chance.
Click to expand...
Click to collapse
Had the poetic case...it's nice...but it eventually broke on me. The back of the case started to detach from the sides. I'm by no means rough with my phone so it didnt take much for it to come apart.
mmmboba said:
Had the poetic case...it's nice...but it eventually broke on me. The back of the case started to detach from the sides. I'm by no means rough with my phone so it didnt take much for it to come apart.
Click to expand...
Click to collapse
Yikes. That's not good news. Did you get a replacement? Poetic seems to be giving a 3 year warranty for it.
juzz86 said:
Picked up a Nillkin hard case for ten bucks off eBay. Usually go for more protection, but this one's done a good job so far. I also didn't want something that put a stack of pressure on the sides of the phone:
Well worth the ten bucks, the included screen protector goes well also.
http://www.ebay.com.au/itm/Nillkin-...AU_MobilePhoneAccessories&hash=item3a7cb95a60
Click to expand...
Click to collapse
What camera was used to take the pictures? really clean shots
osmosizzz said:
What camera was used to take the pictures? really clean shots
Click to expand...
Click to collapse
Canon EOS 1100D man, stock 18-55 lens :good:
Now that we have have all of our own forums I figured we'd get this one started.
The cases showed up for my fones the other day, the phone yesterday, but I'm still 800 miles away.
The phone in the picture is my wifes T Mobile Samsung Galaxy Note 2 in a Seidio case.
Fintie LG G3 Case - Guardian Series Dual Layer Holster with Kickstand and Belt Swivel Clip for LG G3 2014 - Red by Fintie http://www.amazon.com/dp/B00KL80TDO/
Hyperion Titan 2-piece Premium Hybrid Protective Case / Cover for L... http://www.amazon.com/dp/B00JPL5LW2/
Hyperion Titan 2-piece Premium Hybrid Protective Case / Cover for L... http://www.amazon.com/dp/B00JPL5LW2/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
IMO the spigen slim armor case is probably the nicest, slimmest, case there is while still protecting your phone... I love mine. I bought a white phone and wanted to stay with white
Is there a difference between international versions and the US versions with theses cases? Like not having certain holes cut out for antennae placement
joemagistro said:
IMO the spigen slim armor case is probably the nicest, slimmest, case there is while still protecting your phone... I love mine. I bought a white phone and wanted to stay with white
Click to expand...
Click to collapse
Agreed. I bought the gunmetal one for my black G3 and couldn't be happier. True to form, I dropped it last night (grumble grumble) and though the case got a tiny bit scuffed on the tumble/slide across the concrete, the phone is unaffected.
kpantz said:
Agreed. I bought the gunmetal one for my black G3 and couldn't be happier. True to form, I dropped it last night (grumble grumble) and though the case got a tiny bit scuffed on the tumble/slide across the concrete, the phone is unaffected.
Click to expand...
Click to collapse
Gun metal one here too. Looks great. I still can't believe how light this phone is even with a case
Sent from my VS985 4G using Tapatalk
And THIN! My G3 doesn't feel any thicker than without it, and didn't lose that great stock feel the G3 has.
I'm really REALLy digging these Hyperion Titan cases. I'll have to do a review on one in a few days. Really great fit.
How much bulk does that hyperion add?
Almost none. Let me get my calipers...
According to my digital calipers, the stock devices 9.76 mm. With the case it is 13 mm.
3.24mm thicker with the case. The front lip that protects the face is probably half of that.
Here's more pics...
I just ordered the spigon hybrid case with the clear back. I'm pretty careful with my phone do don't really need a super bulky one. Here's 2 links for sites with various case for people that are interested.
http://www.mobilefun.co.uk/cat/G3-Cases.htm
http://g3cases.com/
RED ZMAN said:
According to my digital calipers, the stock devices 9.76 mm. With the case it is 13 mm.
3.24mm thicker with the case. The front lip that protects the face is probably half of that.
Here's more pics...
Click to expand...
Click to collapse
Thank you for the extensive pictures. I'm debating between this one and the Spigen Slim Armor. Main thing I like in the Spigen is the little bit of plastic it puts between the volume up and the camera lens, I find myself hitting the lens by mistake a lot and I think this would help me find the volume better.
LG shows a nice looking Slim leather case but I don't see it for sale anywhere.
http://www.lg.com/uk/lg-g3/e_accessories
RED ZMAN said:
I'm really REALLy digging these Hyperion Titan cases. I'll have to do a review on one in a few days. Really great fit.
Click to expand...
Click to collapse
This might be an unanswerable question, but how sturdy is the color on the hard frame? A long time ago I had a case like this for my S3 and within a month the color on the corners of the hard plastic was starting to wear off. I've since then only used cases where the soft portion has color and the hard part is black or white.
Otherwise I've been eyeballing the Hyperion cases since they started showing up online. I like how slim they are and how they maintain the back curve of the phone.
bobbarker2 said:
Thank you for the extensive pictures. I'm debating between this one and the Spigen Slim Armor. Main thing I like in the Spigen is the little bit of plastic it puts between the volume up and the camera lens, I find myself hitting the lens by mistake a lot and I think this would help me find the volume better.
Click to expand...
Click to collapse
Thanks button is for thanks man. Not an issue, folks here help me all the time, I like to help back.
I can see a thin part like that being helpful, but this looks great. BTW, I JUST noticed there is a plastic cover on the power button and volume buttons I didn't peel off. How did they ever expect anyone to notice that? Much better now!
To find the volume button I put my finger on the power button and slide up.
postal302 said:
This might be an unanswerable question, but how sturdy is the color on the hard frame? A long time ago I had a case like this for my S3 and within a month the color on the corners of the hard plastic was starting to wear off. I've since then only used cases where the soft portion has color and the hard part is black or white.
Otherwise I've been eyeballing the Hyperion cases since they started showing up online. I like how slim they are and how they maintain the back curve of the phone.
Click to expand...
Click to collapse
Seems pretty frigging sturdy. I don't think it is painted, I think thats actually colored plastic. I've got mine in a cheap holster (see the nasty red case in my first post) and no issues at all yet. I'll keep you all up to date though.
Juswanted to say, I got the Spigen Slim Armor in gunmetal from amazon for 17.99 i think? came fast.. and its been great. I'm not a fan of big cases.. and this one stays pretty true to form.. I wish i could bareback it with nothing cuz the thing looks great by itself.. but, ya know
---------- Post added at 12:41 PM ---------- Previous post was at 12:35 PM ----------
hawkswind1 said:
LG shows a nice looking Slim leather case but I don't see it for sale anywhere.
Click to expand...
Click to collapse
wow.. some nice accessories there.. but it's like going to the dealer for an oil change.. i can't do it... ha
RED ZMAN said:
Thanks button is for thanks man. Not an issue, folks here help me all the time, I like to help back.
I can see a thin part like that being helpful, but this looks great. BTW, I JUST noticed there is a plastic cover on the power button and volume buttons I didn't peel off. How did they ever expect anyone to notice that? Much better now!
Click to expand...
Click to collapse
Wow still had mine on too.
Well holy crap. LOL I posted a thread about it in General. Much nicer feel now!
anyone know anything bout these cases. i like to throw my phone sometimes and i need protection
http://www.ebay.com/itm/261523444054?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
neckbonest said:
anyone know anything bout these cases. i like to throw my phone sometimes and i need protection
http://www.ebay.com/itm/261523444054?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
Click to expand...
Click to collapse
Some users are discussing it here
So far I've tested the Spigen Slim Armour and the Cruzerlite TPU. The slim amour does do a better job of protecting the phone but I'm finding the plastic back to be to slippery for my taste one handed, where the cruzerlite doesn't slip at all but also doesn't protect as we'll.
Sent from my VS985 4G using XDA Premium 4 mobile app
Hi Gang,
I tried submitting this to Supcase itself on the product page of their website, but they have reCaptcha issues, I couldn't so it - So I was able to submit to them via the form for contacting them, which didn't have the same issue.
I figured that it could also be used here. Link to product (get through Amazon though, cheaper) and review I typed up:
http://www.supcase.com/google-nexus-6-unicorn-beetle-clear-bumper-protective-case.html
"New Nexus 6, and wanted a good looking case to go with it. Over at XDA Developers, the discussion drifted towards several, however the Supcase Hybrid jumped out at a lot of us besides myself.
I cannot speak to actual protection, nor do I really want to find out, however the case arrived 1 day before the phone, and my thoughts follow after 2 days of use (I have the Frosted Black):
Awesome aesthetics! - From the bevels on the front edges of the lips at the screen edge to the overall looks and integration of the outer PC ring to the TPU shell, it just looks fantastic. It doesn't, in my opinion, add any real size to the phone itself. The ridges give it some grip, and the TPU seems to be grippy enough for me (especially if you have a little sweat as you are getting used to handling this beast).
The cutouts work well, I only noticed a slight misalignment of the microphone hole on the back, that could be just due to the phone, or manufacturing, but overall it is not a deal breaker, enough of it is there to make it only noticeable as if one is writing a review, in operation no one would be able to tell (there are those who would just drill it out a bit and issue solved, I don't feel it necessary.)
Having the dimple for the Motorola symbol and the camera cutout make great reference points for using your hand holding it if not taking a pic/video, the phone is well balanced and once you have had it a couple of days you know what you can and shouldn't do with it in that regard. (I use Voice to text a lot, so I do not feel the urge to do one handed typing).
The power button and volume rocker are tight - in a good way - meaning you definitely have a solid feel to both. While others feel that the power button should have a different feel, or ridges on it to separate it from the rocker, my feeling on this is that for this phone, you only have the power and volume rocker, is it really that hard to know what you have slid your finger onto? (Realistically I would have preferred if Moto had placed the volume rocker on the other side as like my old Galaxy Nexus, that accomplished separation, plus if Supcase had made one like this for that phone, each side would lend to give leverage to the other when pressing, I'm saying those buttons are solid, and that's what you want.
I chose the frosted over the black/black, because I want to see the nexus logo, and they didn't disappoint, the phone I have is blue however the frosted areas give it a grey tone even in direct sunlight, and it complements the black outer PC ring. Outstanding.
The only negativity I can find is that on my unit after two days, the upper PC lip seems to be slightly "up" from the phone, this is, I feel, due to me having taken the case off a couple of times, my method was to push te top of the screen up and then corners over to then slide off, it may be that it should be set and forget, but this is not a deal breaker either, it has to give a bit to get onto and off the phone, but it is on, and on good, it's not going anywhere.
That's it for my review - If you want a minimal case to use with the phone that looks great, this is the one to get, as stated I cant say how well it would protect your phone, I've only dropped a phone once, and don't want to try this one, but for the cost they offer for it, you get every penny."
Marc
Nice ?
This is my favorite case so far on this phone. I use the clear one on my white N6 and it looks awesome.
Now if only someone had pics of the red one (cant find anything online). And if only someone had pictures of any color with carbon fiber skin showing through.
bob2300nx said:
Now if only someone had pics of the red one (cant find anything online). And if only someone had pictures of any color with carbon fiber skin showing through.
Click to expand...
Click to collapse
I don't have pictures of red one, but my buddy bought exactly the same case for his Note 4, red one, and... well... in reality it looks more pinkish than redish... long story short, he went back to his old case after a week because of the color.
pony182 said:
I don't have pictures of red one, but my buddy bought exactly the same case for his Note 4, red one, and... well... in reality it looks more pinkish than redish... long story short, he went back to his old case after a week because of the color.
Click to expand...
Click to collapse
Thats what I was afraid of based off of the stock pictures. Thanks
Wow that is a very nice case, as far as the slimmest case that still offers protection. You guys think there's anything else competitive? Like a silicone one that fits really well?
p3dr0maz said:
Wow that is a very nice case, as far as the slimmest case that still offers protection. You guys think there's anything else competitive? Like a silicone one that fits really well?
Click to expand...
Click to collapse
The Spigen tpu air bumper case would be what your looking for. The supcase is nicer though still.
Thx for the fast response. Those were nice but I wanted skinnier. I ordered Ringke slim gunmetal. Ok, no? It's not for major drop protection I mainly just want to minimize case scratches.
bill3508 said:
The Spigen tpu air bumper case would be what your looking for. The supcase is nicer though still.
Click to expand...
Click to collapse
For the people who want to see how this case looks with a skin -
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Not the best pics but give a pretty good idea what the skin looks behind the case. Hope this helps!
RW-1 said:
If you want a minimal case to use with the phone that looks great, this is the one to get
Click to expand...
Click to collapse
I saw this case and immediately ordered it. It'll get here before my N6 will . :crying:
I'm kind of a case whore though, and will probably buy several others before all is said and done. With my Nexus 5, I had 13 cases. Nice little review, thanks.
Ordered on Saturday, received it today. Love Amazon 1 day shipping (was actually free for me on Prime).
First impressions, it is a really nice premium case. It feels good in the hands, buttons are nice to press on (not as nice as Ringke Fusion but better than Spigen Ultra Hybrid). Doesn't add much bulk, plays nice with my tempered glass protector, cutouts are perfect. The dimple is properly aligned with the case. So far I'm pretty impressed and this is probably the best case in my opinion that shows off the back of the phone.
The camera cutout could be further in but is deep enough to withstand a drop if the phone was to be dropped. The phone with the case inside feel good in the hands.
zephiK said:
Ordered on Saturday, received it today. Love Amazon 1 day shipping (was actually free for me on Prime).
Click to expand...
Click to collapse
Yea same here, kind of surprising, had never seen free one day shipping before. But ordered yesterday and got it today.
So far, love it. I also ordered a ringke slim and a spigen slim armor. The ringke is easily the smallest case as it is really slim, but it also feels like a cheapish piece of plastic. The spigen was good, but a little bit hefty and the buttons on it were terrible.
This is inbetween in size. Small enough that the added bulk doesn't make the phone seem too big, but enough to feel it offers some food protection. It feels good in the hand and looks great. The buttons are a bit stuff but pretty good.
The only real downside is the small microphone? hole near the bottom of the back is slightly misaligned, as the op said.
Can you guys please compare to the ringe fusion?
Also interested in the difference in bulk between this and the fusion
Supcase feels a little thicker but I think its more that the material is harder. It definitely feels slightly bulkier than the fusion.
Just received mine. First case for my nexus as I just received it today too but damn does it feel good. Buttons feel nice and love the clear back to show off the white. Deff slim and love the way its perfectly designed for the nexus with the indent on the back.
I have the PRO SERIES an man is it good! I've had it on since a week after I got the phone. Only complaint is the camera hole is to long (all the way to the Moto symbol). But the protection is there, feel is good, grip is excellent, all cutouts are lined up great! Add the fact that our N6's are water resistant! I'm feeling safe!
Dachank said:
Also interested in the difference in bulk between this and the fusion
Click to expand...
Click to collapse
There's a difference, but it's not a bad difference. It's bulkier than the Fusion but still very much slim and easy to hold in 1 hand.
bob2300nx said:
Can you guys please compare to the ringe fusion?
Click to expand...
Click to collapse
Major comparisons:
1. Buttons on the Ringke Fusion is a lot better, it's clicky. But by no means that the Supcase buttons are bad, they're actually pretty good and nice to press but Fusion is clicky.
2. The Ringke Fusion back is prone to scratches very easily and depending on what color you get. Crystal View may become "yellowish" over time.
3. The dust covers aren't on the Supcase which is a ++++. Yeah you can cut it off but that's kinda cheap.
4. The Nexus 6 "dimple" is present on the Supcase which is really cool, makes the N6 easier to hold on.
5. Supcase has more grip and feels better in the hands. It is slightly more bulky but doesn't add much bulk when compared to a Spigen Slim Armor or something. Very easy to type with one hand and hold with excellent grip.
I love the look of this case (always have) but I'm concerned with the amount of protection it provides vs the Diztronic Ultra I ended up buying on release back at the end of Nov or beginning of Dec (whenever it came out.. Can't remember).
So far I've tried over 7 cases and this is the THINNEST case you can get for the S7 and it offers full coverage. It is like having a nearly bare phone. The dot pattern on the back is great because it prevents the glass from sticking to the plastic giving it that wet look. The case I got has a great fit and the front lip hugs the phone well on all sides. If you are looking for a clear phone to really show off the galaxy s7 while having the least amount of bulk possible this is the case to get, not to mention it is only $4.98 on Amazon. You can check the case HERE on some angles you can't even tell there is a case on the phone.
If you need drop protection and need an otterbox type of bulk protection this is definitely not for those users, but for those who just want the least amount of bulk w/ a bit of protection and full coverage around the bezels, this is a great little case.
I just got the spigen thin fit (exact fit). it looks just as thin as the above case and also is open on top and bottom so becomes even more minimal. for those that care about protecting the back glass but not parts of the frame. got it on sale for $5 plus shipping...
http://www.amazon.com/Galaxy-Spigen®-Exact-Fit-Premium-Samsung/
Does the wireless charging work through both of these cases?
ITNV said:
Does the wireless charging work through both of these cases?
Click to expand...
Click to collapse
It was working in most cases in S6 Edge. I think it will also work in S7.
ITNV said:
Does the wireless charging work through both of these cases?
Click to expand...
Click to collapse
dont have my s7 yet but i assume it should still work, i have had similar cases on my nexus 5 and the qi charging still worked...
Thanks for finding this OP, I just ordered one. I am not usually a case guy and tend carry my phones naked with just a carbon fiber skin added for grip. But with the S7 and its rounded back not proving well so far in early drop tests, I am looking for the thinnest case possible - already ordered 3 of them.
The Spigen looks great, but I'd prefer the tops to be covered also if I am going to have a case on. When phones fall, the top bezel usually gets nicked. (ask my S6E )
OP - Does the packaging say how thin this case is in mm? I got the Spigen Clear Crystal that's supposedly 0.5 mm, another on eBay that's supposedly 0.3mm and have also seen others on eBay that claim 0.2 mm. Curious.
nolook said:
I just got the spigen thin fit (exact fit). it looks just as thin as the above case and also is open on top and bottom so becomes even more minimal. for those that care about protecting the back glass but not parts of the frame. got it on sale for $5 plus shipping...
http://www.amazon.com/Galaxy-Spigen®-Exact-Fit-Premium-Samsung/
Click to expand...
Click to collapse
This is my daily case and I actually wrote a review on Amazon about it. Love this case.
shaq1907 said:
It was working in most cases in S6 Edge. I think it will also work in S7.
Click to expand...
Click to collapse
The wireless chargers work through Otterboxes, so yeah as long as the case is not metallic or ridiculously thick it will still work.
I got my gmyle case the OP told us about and put it on today. I am very impressed. Truly a slim case, it's thin enough to show off the curved back glass. I have 2 more coming in the mail, but this one's the best of the 2 I have tried so far (Spigen clear crystal before this and the gmyle is way better, way thinner).
Thanks for sharing OP.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Where did you buy it from? Could you post a link please ?
Corbu said:
Where did you buy it from? Could you post a link please ?
Click to expand...
Click to collapse
http://www.amazon.com/gp/product/B01B5SDQ6U?psc=1&redirect=true&ref_=oh_aui_detailpage_o03_s00
Thanks, bud sadly that seller does not ship to Canada and there are none on eBay yet.
Corbu said:
Thanks, bud sadly that seller does not ship to Canada and there are none on eBay yet.
Click to expand...
Click to collapse
I ordered this one a few weeks ago http://www.ebay.com/itm/291687582792?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT
Looks similar except for the camera cutout, in some of the pics it does look pretty slim and it also look like it has a curve on the back. It should be here any day now.
I got the red shield slim case.
To bad I didn't stumble upon this thread sooner.
Looks similar to the gmyle peachpuff. For reference, here are two other slim cases I ordered - note the ebay one says "0.3 mm" ? If you search hard enough on ebay, you can now find as low as "0.2 mm" thickness. The Spigen TPU case for comparison is 0.5 mm.
The eBay one and the bomea one haven't gotten here yet. My idea for the bomea hard case is to wrap it in carbon fiber slick wraps which I already have waiting. But the bomea hard case is not thin enough to show off the curved back, which is a bummer.
We will see, but so far I am extremely happy with the gmyle case. Never been a case guy (always carried the phones naked with just a slick wrap) but with a case as thin as this one, the benefits of having a case outweigh the disadvantages.
http://www.ebay.com/itm/37156471176...49&var=640584606813&ssPageName=STRK:MEBIDX:IT
http://www.amazon.com/gp/product/B01AE3ZLUG?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00
xxaarraa said:
Looks similar to the gmyle peachpuff. For reference, here are two other slim cases I ordered - note the ebay one says "0.3 mm" ? If you search hard enough on ebay, you can now find as low as "0.2 mm" thickness. The Spigen TPU case for comparison is 0.5 mm.
The eBay one and the bomea one haven't gotten here yet. My idea for the bomea hard case is to wrap it in carbon fiber slick wraps which I already have waiting. But the bomea hard case is not thin enough to show off the curved back, which is a bummer.
We will see, but so far I am extremely happy with the gmyle case. Never been a case guy (always carried the phones naked with just a slick wrap) but with a case as thin as this one, the benefits of having a case outweigh the disadvantages.
http://www.ebay.com/itm/37156471176...49&var=640584606813&ssPageName=STRK:MEBIDX:IT
http://www.amazon.com/gp/product/B01AE3ZLUG?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00
Click to expand...
Click to collapse
OK guys, the "bomea" case came in, and it is gorgeous!
It doesn't protect the top and bottom, but I think I am OK with it, since the back glass seems to be the most fragile part of this phone (from drop tests so far).
Not covering the bottom means that it fits within the Gear VR perfectly. Which is an added bonus.
It is even thinner and less obtrusive than the "gmyle" case if that's possible.
It does show the curved back, which I was not expecting so that's a bonus.
It feels really nice in the hands too (soft texture). bomea and the gmyle are both keepers.
Bought an unbranded case identical to that for $1.40 from ebay
peachpuff said:
I ordered this one a few weeks ago http://www.ebay.com/itm/291687582792?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT
Looks similar except for the camera cutout, in some of the pics it does look pretty slim and it also look like it has a curve on the back. It should be here any day now.
Click to expand...
Click to collapse
Has that ebay case arrived? For $1 plus free shipping, you can't really beat that. Looks just as thin as the case mentioned from Amazon
I'm using the Ringke Slim. Had one on a previous S4 and really liked it. Super thin but enough of a lip to elevate the screen when flipped over on a desktop.
I had ordered one of the $ .99 TPU cases from eBay but that may be weeks until it shows up.
http://www.amazon.com/gp/product/B01ACAUFR0?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
gleggie said:
Has that ebay case arrived? For $1 plus free shipping, you can't really beat that. Looks just as thin as the case mentioned from Amazon
Click to expand...
Click to collapse
I checked today but all i got was bills, damn postman.