keep reboot in recovery mode!!! my xperia x10 mini keep reboot in cwm v6.0.2.8 ,plz help me.....thanks
watihell said:
keep reboot in recovery mode!!! my xperia x10 mini keep reboot in cwm v6.0.2.8 ,plz help me.....thanks
Click to expand...
Click to collapse
So... you flashed the nAa-Jellybean kernel... What next?
ortpubje was
SmG67 said:
So... you flashed the nAa-Jellybean kernel... What next?
Click to expand...
Click to collapse
ya flashed nAa, and try to installed the ROM with zip file in recovery mode, but installation aborted, then i juz wan it to reboot to system...but it keep reboot in recovery mode...wat can i do now?
watihell said:
ya flashed nAa, and try to installed the ROM with zip file in recovery mode, but installation aborted, then i juz wan it to reboot to system...but it keep reboot in recovery mode...wat can i do now?
Click to expand...
Click to collapse
If the installation got aborted, it means you can't boot into the system because it didn't install. Which ROM did you try to install, and what was the error it gave when you tried to install it?
SmG67 said:
If the installation got aborted, it means you can't boot into the system because it didn't install. Which ROM did you try to install, and what was the error it gave when you tried to install it?
Click to expand...
Click to collapse
Z-Xperia ROBYN, after i tried tis a few times , i try other custom ROM also, but the same problem, STATUS 7, and finally , i try the stock rom, and it installed, but i still cannot reboot to the system....
watihell said:
Z-Xperia ROBYN, after i tried tis a few times , i try other custom ROM also, but the same problem, STATUS 7, and finally , i try the stock rom, and it installed, but i still cannot reboot to the system....
Click to expand...
Click to collapse
What is your phone-model number? Should be on a sticker under the back-cover of your phone.
SmG67 said:
What is your phone-model number? Should be on a sticker under the back-cover of your phone.
Click to expand...
Click to collapse
e10i , cb5 10w42,is tis?
watihell said:
e10i , cb5 10w42,is tis?
Click to expand...
Click to collapse
Yes, that's it... Did you make sure you flashed the E10-kernel?
And the xperia_Z ROM for robyn, was that ISKPeria_z? That one need the nAa-Gingerbread kernel.
SmG67 said:
Yes, that's it... Did you make sure you flashed the E10-kernel?
And the xperia_Z ROM for robyn, was that ISKPeria_z? That one need the nAa-Gingerbread kernel.
Click to expand...
Click to collapse
U20_2.6.32.60-nAa-05.ftf, i flash tis kernel...and xperia_Z ROM for robyn, but i had installed the stock ROM now...it still the same problem...any idea to solve it???
SmG67 said:
Yes, that's it... Did you make sure you flashed the E10-kernel?
And the xperia_Z ROM for robyn, was that ISKPeria_z? That one need the nAa-Gingerbread kernel.
Click to expand...
Click to collapse
haha,guy...i solved by flashed it to the stock kernel...problem solved, but i really wan to update, and which ROM and KERNEL u r recommend for??
watihell said:
haha,guy...i solved by flashed it to the stock kernel...problem solved, but i really wan to update, and which ROM and KERNEL u r recommend for??
Click to expand...
Click to collapse
E10-kernel, U20 is for x10 mini pro (the one with the keyboard)
But for the ROM you chose you need the nAa-Gingerbread kernel (nAa-14)
This one
Related
touchscreen work fix work, flash hybrom v5
http://forum.xda-developers.com/showthread.php?t=1423562 FIX-work
screen-OK
Thank you very much to all.
what is your devices actually ? sk17i (mini pro) or st15i (mini) ?
just make sure you are download the correct file ..
bambis880 said:
touchscreen nod found touch
seus update -yes not found
fix -- http://forum.xda-developers.com/showthread.php?t=1423562 - yes nod found
please help me
Sorry my English is easy Google translator
Click to expand...
Click to collapse
have u make any backup before flashing the rom?
i also try that rom on my sk17i XMP, but it stucked in SE watermark on 1st boot.. i need to reflash back to stock rom-.-'
StereO_ said:
have u make any backup before flashing the rom?
i also try that rom on my sk17i XMP, but it stucked in SE watermark on 1st boot.. i need to reflash back to stock rom-.-'
Click to expand...
Click to collapse
if you were stucked in SE bootanimation on first boot, try to restart the phone ..
if it didn't solve the problem, it might be the kernel and firmware is your problem that doesn't support hybrom v11
i recommended you to flash .62 firmware using flashtool, then flash KRsH kernel v3.0 from here. After that install hybrom v11 via CWM
I've been try on my sk17i and it is 100% works
______________
My devices has unlocked bootloader, so I don't know if this ways might be not working in locked bootloader
OK work
phazax said:
if you were stucked in SE bootanimation on first boot, try to restart the phone ..
if it didn't solve the problem, it might be the kernel and firmware is your problem that doesn't support hybrom v11
i recommended you to flash .62 firmware using flashtool, then flash KRsH kernel v3.0 from here. After that install hybrom v11 via CWM
I've been try on my sk17i and it is 100% works
______________
My devices has unlocked bootloader, so I don't know if this ways might be not working in locked bootloader
Click to expand...
Click to collapse
yes, what i will 1st to do is to unlock bootloader in order to use hybrom_v11 , but im considering my phone warranty will be avoided.
Guys what kernel is better for this rom?
Tyrigi said:
Guys what kernel is better for this rom?
Click to expand...
Click to collapse
flash KRsH kernel v3.0 from here
StereO_ said:
flash KRsH kernel v3.0 from here
Click to expand...
Click to collapse
Info: 1,6ghz or 2,00ghz? I lost my apps-data? It's good for hybroom? Can I reset my sd card after installed? Thanks a lot sorry for a lot questions.
Regards Tyrigi.
now im using this http://forum.xda-developers.com/showthread.php?t=1349630 who is better?
Tyrigi said:
Info: 1,6ghz or 2,00ghz? I lost my apps-data? It's good for hybroom?
Click to expand...
Click to collapse
any version u can use, but use at your own risk.
no, your apps-data will not lost.
yes, because KRsH Kernel v3.0 is optimized for XMP.
Tyrigi said:
Can I reset my sd card after installed? Thanks a lot sorry for a lot questions.
Regards Tyrigi.
now im using this http://forum.xda-developers.com/showthread.php?t=1349630 who is better?
Click to expand...
Click to collapse
installed kernel modules will not affected sd card data, so no need to reset.
its same what im gave to u-.-
StereO_ said:
any version u can use, but use at your own risk.
no, your apps-data will not lost.
yes, because KRsH Kernel v3.0 is optimized for XMP.
installed kernel modules will not affected sd card data, so no need to reset.
its same what im gave to u-.-
Click to expand...
Click to collapse
Thanks for reply i've installed 1,6ghz kernel you?
i not install any modelus kernel, because i dont want unlock bootloader, im considering my phone warranty
StereO_ said:
i not install any modelus kernel, because i dont want unlock bootloader, im considering my phone warranty
Click to expand...
Click to collapse
You can lock later the bootloeader lol
Tyrigi said:
You can lock later the bootloeader lol
Click to expand...
Click to collapse
once u unlock bootloader your warranty will be avoided because it wipe all drm data even though u relock it back.
I had Custom ROM MIUI v 2.3.23 but when i wonted to update to version 2.3.3 so i tried. But i got an ERROR that said that the SD card could not be mounted, so i tried to reinstall the kernel. I used CF-Root-SGS2_XW_NEE_KI8-v4.3-CWM4.zip, and when it was finished the phone restarted but it stopped on the loading screen. What should i do?
Here is a picture of the original ROM (It is in Norwegian)
z-at-ox said:
I had Custom ROM MIUI v 2.3.23 but when i wonted to update to version 2.3.3 so i tried. But i got an ERROR that said that the SD card could not be mounted, so i tried to reinstall the kernel. I used CF-Root-SGS2_XW_NEE_KI8-v4.3-CWM4.zip, and when it was finished the phone restarted but it stopped on the loading screen. What should i do?
Here is a picture of the original ROM (It is in Norwegian)
Click to expand...
Click to collapse
do a clean install of miui (full wipe etc) , and why do you want to use the ki8 kernel?
pls thanks if i helped u.
cheers!
Is it the wrong kernel
snOwjAwk said:
do a clean install of miui (full wipe etc) , and why do you want to use the ki8 kernel?
pls thanks if i helped u.
cheers!
Click to expand...
Click to collapse
I have tried a clean install, and should I use another one? is the one I am using the wrong one?
z-at-ox said:
I have tried a clean install, and should I use another one? is the one I am using the wrong one?
Click to expand...
Click to collapse
nope it isnt but why dont you use the kernel which is installed with miui?
snOwjAwk said:
nope it isnt but why dont you use the kernel which is installed with miui?
Click to expand...
Click to collapse
Can you explame how I get the Kernel that follows whit MIUI? Do i get it when i install the ROM from Recovery mode?
snOwjAwk said:
nope it isnt but why dont you use the kernel which is installed with miui?
Click to expand...
Click to collapse
Thanks for the help, the reason that the system dident boot was that i tried to install a broken MIUI version. But thanks anywhy
z-at-ox said:
Can you explame how I get the Kernel that follows whit MIUI? Do i get it when i install the ROM from Recovery mode?
Click to expand...
Click to collapse
y you get the kernel which is included in the rom while ur flashing. reflash miui with ALL wipes and you should be fine.
cheers.
hi to all i am new to this forum... hoping for some one to help me... i was flashing the new kernel from fxp 115.. after flashing my phone dont go to recovery... i am previously using krsh kernel when i flash this... plsssss someone pls tell me what to do my phone is not entering recovery.... plssss help here...tnx
icebone_05 said:
hi to all i am new to this forum... hoping for some one to help me... i was flashing the new kernel from fxp 115.. after flashing my phone dont go to recovery... i am previously using krsh kernel when i flash this... plsssss someone pls tell me what to do my phone is not entering recovery.... plssss help here...tnx
Click to expand...
Click to collapse
FXP 115 kernel is not working on mini pro..so just install other kernel like rage or krash..your problem will be solved..
i am a newbe sir... but my phone dont go to recovery? and it cant be detected by flashtool... is there some other way??? tnx
akshay13071990 said:
FXP 115 kernel is not working on mini pro..so just install other kernel like rage or krash..your problem will be solved..
Click to expand...
Click to collapse
i wont go to recovery and flash toll dont detect my phone... is there other ways to install the kernel boot.img???? tnx in advance
icebone_05 said:
i wont go to recovery and flash toll dont detect my phone... is there other ways to install the kernel boot.img???? tnx in advance
Click to expand...
Click to collapse
did you use flashtool...if not here is guide..
http://forum.xda-developers.com/showthread.php?t=1500226
use second method(flastool method)
I think it's soft brick don't worry..can you connect it to flash mod..sure it well work then reflash using correct Kernal
Xperian8~ click thanks if it helps...
akshay13071990 said:
did you use flashtool...if not here is guide..
http://forum.xda-developers.com/showthread.php?t=1500226
use second method(flastool method)
Click to expand...
Click to collapse
yes i am using flash tool sir... unfortunately it cant detect my phone thats why it wont go to flash mode... is there any method to install kernel??? tnx again in advance
shyamjptpm said:
I think it's soft brick don't worry..can you connect it to flash mod..sure it well work then reflash using correct Kernal
Xperian8~ click thanks if it helps...
Click to expand...
Click to collapse
yeah in enter flash mode but it cant go to fastboot mode thats why i cant install the kernel... how can i reflash it??? theres no ftf files for the kernel only boot.img... sorry for this dumb question sir but i am a newbie in this things... tnx in advance
icebone_05 said:
yeah in enter flash mode but it cant go to fastboot mode thats why i cant install the kernel... how can i reflash it??? theres no ftf files for the kernel only boot.img... sorry for this dumb question sir but i am a newbie in this things... tnx in advance
Click to expand...
Click to collapse
if you can go in to flashmode then flash ftf file it includes boot.img also..
here is link...http://forum.xda-developers.com/showthread.php?t=1439298
my device-xperia neo v
i have unlocked bootloader and rooted it successfully.
then i installed cm9 from their official site. it worked fine.i had been using it for 4 months.
but when i try to install any other rom(i tried ice-cream pureness,cm10,etc) i always get a black screen after reboot(for cm10 it stuck at the logo which was flickering in a wierd way though ).
m really bored with cm9.hlp:laugh::laugh:.
Did you flash the right kernel for the ROMs you have installed?
Did you do a full wipe?
fifo171 said:
Did you flash the right kernel for the ROMs you have installed?
Did you do a full wipe?
Click to expand...
Click to collapse
ya...i did a full wipe..but didnt check the kernel.
i read the instructions again and i missed a step.
now that i read it...i dont get it(m noob in this)
the step is-Flash 4.1.B.0.587 ftf using flashtool
i installed a flashtool-emma but it didnt support my cell.then i installed another flashtool named 'FLASHTOOL'...but i get this(see screenshot).
THANX in advance :laugh::
I think you forgot the screenshot
fifo171 said:
I think you forgot the screenshot
Click to expand...
Click to collapse
oh sorry..my bad.
i solved the problem n now i have stock kernel. thanks for ur help
Recently I updated CM7 to my Sony Xperia X10 mini pro.But now i want to update it JBminiProject.I flashed it through Flash tool and installed zip. to it(JBmini.zip).All things are wiped i knew it but my phone is freezing at SE logo,and recovery mode isn't working too.Anyone have solution?.new here..
prisoner08 said:
Recently I updated CM7 to my Sony Xperia X10 mini pro.But now i want to update it JBminiProject.I flashed it through Flash tool and installed zip. to it(JBmini.zip).All things are wiped i knew it but my phone is freezing at SE logo,and recovery mode isn't working too.Anyone have solution?.new here..
Click to expand...
Click to collapse
What? SE-Logo? Doesn't that say enough?
SmG67 said:
What? SE-Logo? Doesn't that say enough?
Click to expand...
Click to collapse
Sony Ericsson logo
Any way to revert to CM7 or go to Recovery mode?..
prisoner08 said:
Any way to revert to CM7 or go to Recovery mode?..
Click to expand...
Click to collapse
You shouldn't have an SE-kernel logo on JB, it should be an nAa-logo Which CM7 ROM were you using before?
first it was original froyo 2.1 then i updated gingerbread(2.3 CM7).
prisoner08 said:
first it was original froyo 2.1 then i updated gingerbread(2.3 CM7).
Click to expand...
Click to collapse
Flash the nAa-JB kernel
SmG67 said:
Flash the nAa-JB kernel[/QUOTE
Can you provide linke for nAa kernal?.There are bunch of kernals here for X10 mini pro so i puzzled.
Click to expand...
Click to collapse
thats my logs in Flashtool
prisoner08 said:
thats my logs in Flashtool
Click to expand...
Click to collapse
I'm a bit puzzled by your flashtool output, even when installing the JB rom on the stock kernel you should still have root access, so I don't know what happened there.
I would suggest this kernel, but you may have to go through flashing back to original 2.1 firmware and go through the rooting process again.
So how to back original firmware will you please elaborate it?.I don't know about reverting.
Bro I reverted my phone to its original firmware by flashing.But dislike its original firmware.please provide me the correct firmware zip of MiniJB or ICS.I also reached at nAa recovery.
prisoner08 said:
Bro I reverted my phone to its original firmware by flashing.But dislike its original firmware.please provide me the correct firmware zip of MiniJB or ICS.I also reached at nAa recovery.
Click to expand...
Click to collapse
If you can flash that kernel i linked to you can use the jbmini firmware you already had with that.