Hello all!
I was surfing the internet for 100's of hours just to find some mod and rom for my china Mid tablet.
There is no brand name written on the TAB, So I used Android system info app to find some specification about this tablet!
Now, let's go to the real matter......
Before buying this tab I used more than 3-4 android devices and helped so many people to modify there phones. So, I know a little bit about android modding! But this is not gonna help me to create a whole new custom rom for my Generic MID Tablet. So I need your help,
First I am gonna give you some specification about my Tbalet....
Android Version: 4.0.4 (Icecream Sandwich)
Release Codename: REL
API LEVEL: 15
CPU ABI: armeabi-v7a
Bootloader: Unknown
Manufacturer: Unknown
CPU ABI2: armeabi
Hardware: Sun4i (That means Allwinner a10 I hope)
Radio: Unknown
Board: Crane
Brand: hn
Device: crane-hn
Display: crane_hn-eng 4.0.4 IMM76D 20121112 dev-keys
Host: ubuntu
ID: IMM76D
Model: MID-CH719H
Product: crane_hn
Total RAM: 1GB
Processor: ARMv7 Processor rev 2(v71)
Screen Resolution: 1024 * 552
Refresh rate: 59.396
Now, There is some other information I should provide.....
I rooted my device after taking a lot of surfing on the internet.
I also installed CWM Recovery
But i can't get into the recovery mode by restarting by pressing various keys.
The only way i get into the recovery mode by writing "echo -e 'boot-recovery\0' > /dev/block/nandf; sync" into the terminal emulator and reboot after that.
Now, What I want to do.....
1. I want to change all the "unknown" parts of the specification to show something...(Not mandatory)
2. Modify the kernel for adding few tweaks as overclocking, adding governors etc.
3. Find out is there any way to install 4.1.1 or 4.1.2 to this device
etc.......
Now I would be pleased if u guys give me some suggestion where to start...
I took a nandroid backup. but trying a lot of methods I couldn't make a copy of the kernel..
I found a boot.img file inside of the nandroid backup, is this the stock kernel of my device. it's 30mb file
Related
Hello all.
I recently received as a gift a cheap tablet Android based and I am new in this Android world.
Till now I had a lot of problems with it that are software based (since I googled it all before post here). My main problem is that this tablet is a kind of general Chinese tablet that some manufacturer here in my country buy, put it brand on it and sell without any support or information.
The tablet I am talking about is named "MD-785IP" from "MIDI Japan" ( Since I can't post any external link I can tell you that if you google for "MIDI Japan MD-785IP" it is probably the first result)
A friend told me to install Electric sheep in order to discover something that could be usefull for a mod ROM search but till now I did not found any information about it over the web, apparently I am the only bastard that have one of those so I asking a help for you.
I need help to identify which tablet it really is and know if I have any chance with this information to find a better ROM, so far this is what I got in the Electric Sheep resume:
Build Infos
Android version: 2.2.1
Release Codename: REL
API LEVEL: 8
CPU ABI: mips
Manufacturer: ingenic
Bootloader: unknown
COU ABI2: unknown
Hardware: lynx
Radio, Board: unknown
Brand: lynx
Device: lynx
Display: lynx-eng 2.2.1 FRG83 eng.huangsen.20111015.104502 test keys
Fingerprint: lynx/lynx/lynx/:2.2.2/FRG83/eng.huangsen.20111015.104502:eng/test-keys
Host: HuangSen
ID: FRG83
....
CPU
system type: JZ4760B
processor: MIPS-compatible processor JZ4760B
cpu model: Ingenic Xburst V4.15 FPU V0.0
BoboMIPS: 598.01
wait instruction: yes
microsecond timers: no
tlb_entries: 32
extra interrupt vector: yes
hardware watchpoint: yes, count
ASEs implemented: mxu
...
CPU implementer: CHNBJJZ
CPU architecture: XBurst
Hardware: LYNX
Revision: 0005
So, my question is. Does anyone have any idea which tablet this one really is?
Please use the Q&A Forum for questions Thanks
Moving to Q&A
Hello everyone! (I'm Italian, sorry for my bad English)
So my problems are these:
Assuming I have a Chinese Smartphone (known as "Star i1900") I can't give it root permissions, I tried various methods including:
1. z4Root
2. GingerBreak
3. SuperOneClick (of this I have tried three different versions)
4. UniversalAndroot
5. UnlockRoot
6. A script with .bat extension found on this forum
None of it worked!
So first question: Is there a way to give permissions to Root this damn Chinese phone?
Second problem:
I want to change the Android version in this smartphone, currently there is a very slow 2.3.6 (made especially for him I guess, because it's a Dual Sim, TV etc.).
I mean, I understand that the phone has only one core 650 Mhz ... but I hope and believe that there is an Android version on which I run better.
Now I carry the information of the phone as they are written:
Model Number:
e1109_v73_jxlc1
Android Version:
2.3.6
Version banda base:
MAUI.11AMD.W11.37.SP.V17.F1, 03/14/2012 16:54
Kernel version:
2.6.35.7
Thu March 22 12:48:28 CST 2012
Build number:
ALPS.GB.FDD2.MP.V4.5
Custom Build Version:
1332391723
Well, since I do not think that this phone has Rom and everything else made especially for him, I arose a doubt:
Can I change the Android version through a Rom official or not but based on another phone with the same characteristics?
P.s. His CPU is a Qualcomm MTK MT6573 650MHz
Thank you for any replies,
Forgive my titanic problem ... You are my last hope
Sorry for the "up"
These are some information from Quadrant:
System
Version SDK: 2.3.6
ID: GRK39F
Name OS: Linux
Version OS: 2.6.35.7
Version Dalvik VM: 1.4.0
Device
Model: e1109_v73_jxlc1
Product: e1109_v73_jxlc1
Board: e1109_v73_jxlc1
Brand: yusu
CPU
Name: ARMv6-compatible processor rev 7 (v6l)
All frequency are indicated by a "?"
Cores: 1
Cores per Java: 1
Architecture: 6
Hope this is useful...
Hello,
I have problems with my tablet Navon Platinum 7. It constantly freezes when playing music while doing something else, the ROM itself is very buggy. Also send to the service center, they said there is no problem.
So, I want to try alternative ROMs, but sadly, I didn't find any of them and even the official roms are not available.
Specs of the tablet:
Code:
SDK version : 4.0.4
ID: IMM76I
OS name:Linux
OS VEr. :2.6.34
DEvice
Model: platinum
Product: HFM752MC
Board: same
Brand : MID
Fingerprint : MID/HFM752MC/HFM752MC:4.0.4/IMM76/eng.root.20120910.165253:user/release-keys
CPU
Name: ARMv7 Processor rev 4 (v7l) (Cortex A9)
Current and max freq :1000Mhz
Cores:1
Architecture:7
BogoMIPS:1556.48
Hardware:amologic meson3 8726M SKT SH
Rev:4
serial #:000000000000000c
MEMory: Total 425525kb
Display
Resolution: 480x764
DPI:132x140
50HZ
GPU(OpenGL)
Vendor ARM
Renderer: MAli-400MP
VER. : OpenGL ES 2.0
Is there anybody who has this tablet and/or knows what ROM is the best?
Thanks.
Hello,
my sister´s girlfriend got a strange tablet and asked me, if I could make it faster/more responsible.
I would really like to help her although it´s a ****ty piece of hardware.
A little googleing showes, that it looks like a "MaPan MX 913". But the specs doesn´t
Android System Info says:
Andoid version: 4.0.4
Release Codename: REL
API LEVEL: 15
CPU ABI: armeabi-v7a
Hardware: sun5i
Board: nuclear
Brand: softwinners
Device: nuclear-f900
Display: f900-dbl_V1.1.7_20130122p_r587_27d8028
Fingerprint: softwinners/nuclear_f900/nuclear_f900:4.0.4/IMM76D/20121225:eng/test-keys
Host: brn-zhengshenxing
ID: IMM76D
Model: Softwinerf900 <-- no typo
Product: nuclear_f900
Tags: test-keys
Type: eng
User: zhengzhenxing
The screen resolution is 800x432 :-/
Has anybody a clue, who build this thing and - more important - how to root it and where to get a better ROM for it.
germanhoss said:
Hello,
my sister´s girlfriend got a strange tablet and asked me, if I could make it faster/more responsible.
I would really like to help her although it´s a ****ty piece of hardware.
A little googleing showes, that it looks like a "MaPan MX 913". But the specs doesn´t
Android System Info says:
Andoid version: 4.0.4
Release Codename: REL
API LEVEL: 15
CPU ABI: armeabi-v7a
Hardware: sun5i
Board: nuclear
Brand: softwinners
Device: nuclear-f900
Display: f900-dbl_V1.1.7_20130122p_r587_27d8028
Fingerprint: softwinners/nuclear_f900/nuclear_f900:4.0.4/IMM76D/20121225:eng/test-keys
Host: brn-zhengshenxing
ID: IMM76D
Model: Softwinerf900 <-- no typo
Product: nuclear_f900
Tags: test-keys
Type: eng
User: zhengzhenxing
The screen resolution is 800x432 :-/
Has anybody a clue, who build this thing and - more important - how to root it and where to get a better ROM for it.
Click to expand...
Click to collapse
sun5i = AllWinner A13
I have a tablet with this processor.
There are a lot of ROMs for this device (AOKP, CM10 etc).
Use Google
Hi all,
I've just bought a chinese tablet and I want to make a full backup (rom+data), but for that I must root it first, but if I root I might brick it.
I have to root is to install link 2 sd because I get out of space very quickly.
Is it possible to root this tablet without bricking it? (Details below)
In my country (Portugal) the brand is NTECH, using Elixir 2 app I can get the following information:
Code:
[B]Build:[/B]
Manufacturer: alps
Model: MX3QC3G
Android version: 4.2.2
SDK version: 17
Booloader: unknown
[B]Display:[/B]
Resolution: 1024x552
Density: 160 DPI
[B]More Information:[/B]
Board/Device: rmt89_tb_jb2
CPU ABI: armeabi-v7a
Display: ALPS.JB2.MP.V1.25
Hardware: mt8389
Thanks for all the help,
Luís Miguel Pinho
Yes you can.
I have that same model rooted!