[Q] Weird Modem Issue on Cyanogenmod 10.1 - Galaxy S III Q&A, Help & Troubleshooting

Hello community, I'm having a bit of an annoying issue with my Cyanogenmod connection to mobile data.
I'm running version 20130624 nighlty of the CM rom and, after trying fixing my problem with different modems, I realised I needed someone else's help.
I'm from argentina, my baseband version is I9300UBLG5 and, even being somewhat of an android newbie, it was relatively easy to find out that I had to download the UBLG5 modem to get data reception after installing CM 10.1.
I did and everything was fine. But later on I realised that whenever I'm on mobile data and I get 3G reception, nothing will load. Whenever I'm on Edge or H I'm able to load everything perfectly, but what's even weirder is that even though I can't browse the internet, use facebook or twitter etc, I do recieve whatsapp messages when on 3G.
I have tried using two other different modems: I9300XXLH1 and UBELL1. Not to mention several APNs that I found browsing through google results from my country, and I still can't seem to find a solution for this problem.
I would really appreciate if you could help me out here as it's a really annoying problem to have, even more so when I spend most of my week on mobile data.
Thank you!
P.S.: Im rooted on (obviously) 4.2.2.

Related

[Q] Extremely Slow Speeds on Neutrino ROM V2.2

Hello all,
I've attempted searching to no avail. Has anyone else had extremely poor data speeds using the latest version of Neutrino ROM V2.2? I'm getting unusable speeds (100kb down for example.) The radio I'm using is 30P. Reflashing unfortunately did not resolve anything. Back to Alien 4, again :\
Thanks!
Do u have problems with wifi? i believe i may have a similar problem. However, my problem was that, apps like facebook and youtube takes forever to load on 3G/HSPA. browser has no such problems.
If i used wifi, the apps work perfectly. So it may be permission settings/data settings or even a bad flash. I googled for a solution but to no avail.

[Q] Needing help with S5830L

Hi, everyone.
After a slight fall, my S5830L started rebooting randomly. In some cases it just shutdown.
Looking for causes, I've found that when Data Connection is active ( In Settings - Wireless and Network Settings - Mobile Networks) it reboots.
If I turn off Data Connections everything is fine. I even can connect using WiFi when available, and synchronize accounts, send emails, access market, etc. All OK.
When I check again Data Connection option, sooner or later (rather sooner) it fails again.
Has anyone heard about issues like this? I need some help to deal with it. I can use almost everything, except data connection, and I really miss it
Thanks to all for the answers, any idea is welcome!
Augusto.
PS: Hope my mail is clear enough, since English is not my native language...
atognetti said:
Hi, everyone.
After a slight fall, my S5930L started rebooting randomly. In some cases it just shutdown.
Looking for causes, I've found that when Data Connection is active ( In Settings - Wireless and Network Settings - Mobile Networks) it reboots.
If I turn off Data Connections everything is fine. I even can connect using WiFi when available, and synchronize accounts, send emails, access market, etc. All OK.
When I check again Data Connection option, sooner or later (rather sooner) it fails again.
Has anyone heard about issues like this? I need some help to deal with it. I can use almost everything, except data connection, and I really miss it
Thanks to all for the answers, any idea is welcome!
Augusto.
PS: Hope my mail is clear enough, since English is not my native language...
Click to expand...
Click to collapse
Hi, this is not normal, what firmware do have you installed?
This problem may be occur with any program installed and not for firmware problem.
I've flashed at least three different firmwares and with all the same problem persists.
Right now i've Android 2.3.6 (from Entel PCS, Chile)
Kernel: 2.6.35.7-perf- CL771662
Compilation Number: GINGERBREAD.UBKPL
Baseband Version: S5830LUBKPL
The problem started after my son dropped the phone downstairs, just a couple of steps, though...
I don't remember installed anything wierd, for that time.-
PS: I took the info about Entel PCS version from your web. Thanx. Nice Job!
I would have to agree that it sounds more software then hardware based. Usually if hardwares broken its very predictable. I would try to restore a different firmware stock or custom. I have an L and went with a custom rom. The data dropping might be a baseband issue but someone more wise than I would have to comment on that.
The wierd thing is that on the first connection it works, at some point the connection hangs, then while trying to reconnect it shutdown.
I was running a Samsung's 2.3.4 firmware when the problem started, then I flashed a Personal Stock 2.3.4 firmware (the original, that came with the phone), after that tried Entel PCS's 2.3.6. I keep this one because it's the newer version...
All behave the same way. The baseband should be the same for all, because the L (S5830L) is for LatinAmerica, and I've always double checked this.
Hi,
Have you tried to flash the original stock ROM again? You can download it from http://www.sammobile.com/firmware/
This site also explain how to use odin to flash the firmware.
My Android version is 2.3.4and Baseband is S5830LUBKPF and it works OK
I believe it might be hardware wise. Have you rooted you SGA already?

Loosing Data connection

Hi All.
Provider: "3" Austria
ROM: Omega V32 & Android Revolution HD 9.0.0 (or earlier)
When the Phone is lost the Network connection (elevator, no coverage,...), it reconnects, everything seems to be fine, it shows also 3G or H+ data connection, but that's not true, what's displayed on screen, phone calls are possible, but there is no data connection available.
Restarting the phone and everything is fine. Switching off( on FlightMode or data won't help.
Now I installed just for testing CM10 nighly and it work's fine, no problems!! BTW, it worked also fine with Omega ICS Versions!
I like Omega or Revolution muc more then CM10, cause I like TouchWiz. Do you have any ideas, how to fix this? Maybe a different kernel?
THANKS for your help
Andi :laugh:
Gukerl said:
Hi All.
Provider: "3" Austria
ROM: Omega V32 & Android Revolution HD 9.0.0 (or earlier)
When the Phone is lost the Network connection (elevator, no coverage,...), it reconnects, everything seems to be fine, it shows also 3G or H+ data connection, but that's not true, what's displayed on screen, phone calls are possible, but there is no data connection available.
Restarting the phone and everything is fine. Switching off( on FlightMode or data won't help.
Now I installed just for testing CM10 nighly and it work's fine, no problems!! BTW, it worked also fine with Omega ICS Versions!
I like Omega or Revolution muc more then CM10, cause I like TouchWiz. Do you have any ideas, how to fix this? Maybe a different kernel?
THANKS for your help
Andi :laugh:
Click to expand...
Click to collapse
u could try a different modem
Thanks für the hint... it's hard to find a summary of relating Modem's or Kernels to trie.
I did a full wipe now and installed everything from scratch, also using the latest Omega V26 Rom. It's a bit better now. The difference is, if it's loosing 3G, connecting to GSM it hardly reconnects to 3G, and if it's done, no most of the time HSDPA is not shown. It's not really reproducable, cause it depends on the location. Switch off / on data solves the problem.
I read somewhere here, that I'm not the only one with problems related the Austrian Provider "3". Anyone else here?
Maybe someone here has a list of Kernels and Modems to use or a link, where to find. I used Search but toooo many results for me to find the correct on.
Thanks
Gukerl said:
Thanks für the hint... it's hard to find a summary of relating Modem's or Kernels to trie.
I did a full wipe now and installed everything from scratch, also using the latest Omega V26 Rom. It's a bit better now. The difference is, if it's loosing 3G, connecting to GSM it hardly reconnects to 3G, and if it's done, no most of the time HSDPA is not shown. It's not really reproducable, cause it depends on the location. Switch off / on data solves the problem.
I read somewhere here, that I'm not the only one with problems related the Austrian Provider "3". Anyone else here?
Maybe someone here has a list of Kernels and Modems to use or a link, where to find. I used Search but toooo many results for me to find the correct on.
Thanks
Click to expand...
Click to collapse
INDEX has Modem links .
jje

[Q] HELP Thunderbolt Rom V2 - Signal Problems

Hi - I am brand new here and have spent a couple of days working out a couple of problems I have had with Thunderbolt ROM V2 Jelly Bean. The first problem I had was no sound coming from the Samsung S2 dock, I read around tried a few different solutions but nothing worked. I did happen to find an excellent Playstore App called 'Dock Sound Redirector' and this did the job for me.
However, after leaving for some shopping today I have found a major problem with the ROM which is that I cannot receive a data signal for most of my apps, except strangely - Facebook. I get connection errors on my news apps, flipboard fails, twitter fails etc. So this is a major problem and defeats the purpose of having a smart phone.
I have an international Galaxy S2.
So - so far I have flashed the radio with at least 3 different zips and nothing has worked. I downloaded a network switch tool that allowed me to better access the protocols such as CDMA, GSM and so on. No effect.
Has anyone had the same issue and has any ideas about solving this one?
On install I just took the default kernel (although I have no idea what that means) which was the dream kernel.
Really appreciate it.

SVD voice and data at same time not working

Hi, posting here to broaden the net a little. I have carbon ROM that i am fairly sure allowed simultaneous voice and data. I.e when making a call on Bluetooth in the car, data for Google maps stayed active. Now that doesn't work but I am sure this worked since the froyo days. I'm trying to pinpoint the cause.
I have sgs2 and tried three different radios with and without ril, nelp3, nelp4, and nels1, but no change to behaviour . But My wife's sgs3 is on vodafone uk and also drops data connection when making phone calls. (Seen by H/3g logo disappearing and being unable to use data when making calls).
We think it's recent but unsure if it's the ROM or something else.
Would appreciate if someone on another rom on a Samsung phone or two can check for me before I restore a backup to check myself.
Also any ideas how to debug?
Thank you
Chris
P.s already tried different and included kernels on both phones.
Sent from my Nexus 7 using Tapatalk 4
Same problem with Carbon 4.3 on LS970
crypticc said:
Hi, posting here to broaden the net a little. I have carbon ROM that i am fairly sure allowed simultaneous voice and data. I.e when making a call on Bluetooth in the car, data for Google maps stayed active. Now that doesn't work but I am sure this worked since the froyo days. I'm trying to pinpoint the cause.
I have sgs2 and tried three different radios with and without ril, nelp3, nelp4, and nels1, but no change to behaviour . But My wife's sgs3 is on vodafone uk and also drops data connection when making phone calls. (Seen by H/3g logo disappearing and being unable to use data when making calls).
We think it's recent but unsure if it's the ROM or something else.
Would appreciate if someone on another rom on a Samsung phone or two can check for me before I restore a backup to check myself.
Also any ideas how to debug?
Thank you
Chris
P.s already tried different and included kernels on both phones.
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
I am hoping to find the answer to this is Carbon related (CM10.1 vs 10.2 branches maybe?) and not specific to devices. Could you post this thread on the Dev page for that ROM? That way the Devs for the ROM know about it... and may be able to find the solution. Fingers crossed!

Categories

Resources