[Q] Finding my RUU - HTC EVO 3D

Hello, I need help getting the right RUU to restore my HTC Evo 3D back to stock ROM.
I read this page but found it confusing and didn't find the stuff that my commands gave me
http://forum.xda-developers.com/showthread.php?t=1672425
My CID: SPCS_002
My version-main: 2.95.652.5
Hope to get some help here!

I too need this! I am bricked.

Same here!
CID: SPCS_002
Version: 1.14.652.0
I just need one corresponding to the CID because basically any RUU I try shoots me an error saying "invalid CID". Please and thank you for any help!

There is only one ruu available for the Virgin Mobile Evo V and it can be found here: http://goo.im/stock/shooter/ruu
If you are s-off, you can run it any time.
If s-on...
If you took the march ota you can run it as long as beforehand you flash the SetMainVersionLow.zip in recovery.
http://db.tt/JUdxrcC0
If you took the November ota which updated you to hboot 1.58, then unfortunately you cannot run the ruu.
Once again if s-off you can run no matter what without problems. But for s-on you either have to change your main version or on the latest ota you are left without an ruu

Related

evo 3d cdma RUU

hello all
my phone is bugging out and some one suggested to flash the latest RUU.
- quick question.
---if i flash the latest RUU will i loose root?
Yes you will lose root.
thank you.
Quick question ............
-how can i flash a RUU that has the Hboot of 1.4 instead of a 1.5.
(can some one please help me my phone randomly reboots on any rom, i was recommended to flash a RUU and then unlock again)
If your current HBoot is 1.50 with S-ON you can't downgrade the Hboot, at all. You won't be able to flash a lower Firmware/baseband than what's currently installed either, but you can reflash the RUU for what's installed or a newer one.
If you have HTC Unlocked HBoot 1.50 and S-ON, you can get more info that may help you in the Guide/Flashing notes in my signature.
Edit: Saw your question in the other section that you have Hboot 1.40. Disregard

Q Evo 3D HBoot 1.5 Downgrade can't brick

Please Help
I used the HTC unlock method, had a custom Rom, went to install an ICS Rom got a bootloop.
Decided to downgrade to HBOOT 1.4. I followed the guide here at XDA http://forum.xda-developers.com/showthread.php?t=1563342
Until I got to the part where I am supposed to brick it. I have downloaded the 2.17 RUU.zip renamed it to PG86IMG.zip checked to make sure the file name is correct, once i copied to the phone and loaded my phone in bootloader it would just check the PG86IMG.zip and do nothing , it DOES NOT ask me to update. Ss this because when I reboot into android it says..
in Settings, ABOUT PHONE it says I have Software number 2.17.651.5
other info on my phone is:
Android 2.3.4
Sense 3.0
Software Number 2.17.651.5
in the bootloader my phone says
Relocked
Shooter XC SHIP S-ON RL
HBOOT 1.50.0000
eMMC-boot
Aug 7 2011, 10:21:40
Somewhere in the process I downloaded the 2.17 RUU in exe format and ran it from windows. at that point I didn't have a working ROM since I had tried the ICS ROM and bootlooped.
What can I do from here I'm stuck any help would be greatly appreciated.
Thanks

CID Bricked Shooter (CDMA)

Here is what I did:
Months ago trying to install ICS (VM leak) went to s-off on my Sprint EVO 3D y changed my CID to super CID (111111) then thinking that the original CID of the phone was HTC__001 (following an EVO 3D GSM tutorial) changed it and went back to S-ON and stock but with the wrong CID (HTC__001) then when y tried to use my phone and update it to Sprint ICS but the phone won't even load the OS, it shows the screen where I can see my HBOOT by the way is 1.5 and go to fastboot but it says security warning etc... I do can install CWM and 4ext that means I can lock and relock fastboot oem then I tried to install several roms stock inculded but still doesn't boot to the OS even I tried to install stock RUU zip and EXE but since I'm with wrong CID the phone displays Wrong CID I don't know if installing a RUU for the CID HTC__001 makes sense but anyway when I try to install it says signature fail and since installing the RUU for Bricking or corrupting the HBOOT is imposible, I can't get in to QHSUSB_DLOAD to try any method like HTC Unbricking Project, Ultimate Recovery Tool 2.3 RC1, HBOOT Downgrade Toolkit Live CD or Juopunutbear S-OFF......
So achieving S-OFF it's imposible for my or I'm missing any other method for S-OFF and go back to the SPCS_001 CID? or there is another way to change the CID on S-ON considering that fastboot oem writecid fails on S-ON I even tried modifying the mmcblk0p4 file with an hex editor and it failed
Another way would be using a RUU with the android-info file changed to accept my HTC__001 CID even my hardware is CDMA (shooter) but signed for S-ON
Or another way is somehow corrupting the HBOOT without installing a RUU
So being S-ON with the wrong CID (HTC__001) with warning security and HBOOT 1.5 and no ROM can boot I think my phone is really death
Is there something missing I can do to make it work again or I have a really expensive brick??
anyone help??? please
Deleted
Wikd said:
Deleted
Click to expand...
Click to collapse
didn't worked for me, I don't have the exact error that shows, I'm not at home now trying to post you the error later....
any other ideas?? another method for s-off or maybe change the CID

[Q] Wrong CID and S-OFF

Here is what I did:
Months ago trying to install ICS (VM leak) went to s-off on my Sprint EVO 3D y changed my CID to super CID (111111) then thinking that the original CID of the phone was HTC__001 (following an EVO 3D GSM tutorial) changed it and went back to S-ON and stock but with the wrong CID (HTC__001) then when y tried to use my phone and update it to Sprint ICS but the phone won't even load the OS, it shows the screen where I can see my HBOOT by the way is 1.5 and go to fastboot but it says security warning etc... I do can install CWM and 4ext that means I can lock and relock fastboot oem then I tried to install several roms stock inculded but still doesn't boot to the OS even I tried to install stock RUU zip and EXE but since I'm with wrong CID the phone displays Wrong CID I don't know if installing a RUU for the CID HTC__001 makes sense but anyway when I try to install it says signature fail and since installing the RUU for Bricking or corrupting the HBOOT is imposible, I can't get in to QHSUSB_DLOAD to try any method like HTC Unbricking Project, Ultimate Recovery Tool 2.3 RC1, HBOOT Downgrade Toolkit Live CD or Juopunutbear S-OFF......
So achieving S-OFF it's imposible for my or I'm missing any other method for S-OFF and go back to the SPCS_001 CID? or there is another way to change the CID on S-ON considering that fastboot oem writecid fails on S-ON I even tried modifying the mmcblk0p4 file with an hex editor and it failed
Another way would be using a RUU with the android-info file changed to accept my HTC__001 CID even my hardware is CDMA (shooter) but signed for S-ON
Or another way is somehow corrupting the HBOOT without installing a RUU
So being S-ON with the wrong CID (HTC__001) with warning security and HBOOT 1.5 and no ROM can boot I think my phone is really death
Is there something missing I can do to make it work again or I have a really expensive brick??
anyone help??? please

big problem

Here is what I did:
Months ago trying to install ICS (VM leak) went to s-off on my Sprint EVO 3D y changed my CID to super CID (111111) then thinking that the original CID of the phone was HTC__001 (following an EVO 3D GSM tutorial) changed it and went back to S-ON and stock but with the wrong CID (HTC__001) then when y tried to use my phone and update it to Sprint ICS but the phone won't even load the OS, it shows the screen where I can see my HBOOT by the way is 1.5 and go to fastboot but it says security warning etc... I do can install CWM and 4ext that means I can lock and relock fastboot oem then I tried to install several roms stock inculded but still doesn't boot to the OS even I tried to install stock RUU zip and EXE but since I'm with wrong CID the phone displays Wrong CID I don't know if installing a RUU for the CID HTC__001 makes sense but anyway when I try to install it says signature fail and since installing the RUU for Bricking or corrupting the HBOOT is imposible, I can't get in to QHSUSB_DLOAD to try any method like HTC Unbricking Project, Ultimate Recovery Tool 2.3 RC1, HBOOT Downgrade Toolkit Live CD or Juopunutbear S-OFF......
So achieving S-OFF it's imposible for my or I'm missing any other method for S-OFF and go back to the SPCS_001 CID? or there is another way to change the CID on S-ON considering that fastboot oem writecid fails on S-ON I even tried modifying the mmcblk0p4 file with an hex editor and it failed
Another way would be using a RUU with the android-info file changed to accept my HTC__001 CID even my hardware is CDMA (shooter) but signed for S-ON
Or another way is somehow corrupting the HBOOT without installing a RUU
So being S-ON with the wrong CID (HTC__001) with warning security and HBOOT 1.5 and no ROM can boot I think my phone is really death
Is there something missing I can do to make it work again or I have a really expensive brick??
anyone help???
really sorry to hear about your problem.
i think you might get some quicker replies tho if you were to post this in the Q&A section so people will know your asking for help.
best of luck in fixing your phone!

Categories

Resources