Related
Hello,
This is my first time installing a custom rom and I hope i did everything right. I installed CM9 using the guide found on their wiki page and installed it successfully. But after installation i cannot get my sim card to work on the phone.
Recovery: ClockWorkMod
CM9: 9.0.0-i9300
Galaxy SIII international.
Thanks in advance
Muzammil Ahmed
muxammle said:
Hello,
This is my first time installing a custom rom and I hope i did everything right. I installed CM9 using the guide found on their wiki page and installed it successfully. But after installation i cannot get my sim card to work on the phone.
Recovery: ClockWorkMod
CM9: 9.0.0-i9300
Galaxy SIII international.
Thanks in advance
Muzammil Ahmed
Click to expand...
Click to collapse
try reinstall a stock rom, check if everythings is fine then reinstall CM9
Thnx for the quick response
I think the problem isn't cm9, when I was trying to install the from I couldn't boot to the cwm recovery because I forgot to root my device. Then I rooted my s3 with cf something root kit and then my signals were gone. I have the international version so my phone should be factory unlocked so I thought I should install cm anyway cuz that might solve the problem. But it didn't. I really like cyanogenmod and don't want to revert back to crappy touchwizz . The problem was there before installing cm9 but after rooting my phone.
Please any help. I really need to use my phone.
Thnx
Muzammil
muxammle said:
Thnx for the quick response
I think the problem isn't cm9, when I was trying to install the from I couldn't boot to the cwm recovery because I forgot to root my device. Then I rooted my s3 with cf something root kit and then my signals were gone. I have the international version so my phone should be factory unlocked so I thought I should install cm anyway cuz that might solve the problem. But it didn't. I really like cyanogenmod and don't want to revert back to crappy touchwizz . The problem was there before installing cm9 but after rooting my phone.
Please any help. I really need to use my phone.
Thnx
Muzammil
Click to expand...
Click to collapse
You should reinstall everything from the scratch mate, so revert your device at stock (using odin), then flash the correct [email protected] kernel and finally if everything is working flash cm9.
Edit: if your device is locked i think you can unlock it easily, search in the forum you can find out everything you need for this.
Sent from my GT-I9300 eating Jelly Bean
sorry mate ..
i am a complete noob, i dont know how to revert to stock rom, stock recovery and unroot my device
Download original firmware for your phone from sammobiles and flash it using odin. If is good then root it again and flash cm9.
Sent from my GT-I9300 using xda app-developers app
Arsaw said:
Download original firmware for your phone from sammobiles and flash it using odin. If is good then root it again and flash cm9.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Okay,
I have downloaded my firmware file but i noticed that i need three tar files for the flashing precess through ODIN but i downloaded only 1 file *.tar.md5
no clue now what to do
Update: I tried to extract the file using splitfus but it didnt work.
Update 2: Okay now I have Installed my stock firmware and it seems to be working now.. But should I risk installing the CM9 again ?
muxammle said:
Okay,
I have downloaded my firmware file but i noticed that i need three tar files for the flashing precess through ODIN but i downloaded only 1 file *.tar.md5
no clue now what to do
Update: I tried to extract the file using splitfus but it didnt work.
Click to expand...
Click to collapse
- launch Odin
- load that ONE FILE on PDA section
- put your phone in download mode (volume down+home+power)
- connect the phone to computer, wait for drivers to be installed and ODIN to find your phone (you will see a message in Odin)
- click start
- don't touch the phone until it's done. It will boot alone
Also, it might be a good idea to wipe data / reset to factory before and after flash.
You could find all this info with google ....
On the topic, I have a similar issue. My phone was factory unlocked , and got locked after flashing latest stock firmware. Downgrading didn't solved anything. I am searching the forums right now, but it seems like all fixes are dated.
If anyone could point me in the right direction, it will be appreciated.
Thx
Hey rsndetre,
Thnx for the post, but sorry I already did that and it worked ..
Here are the method I used to get back my device back to normal and got my sim card working and again reinstalled cm9
1- Downloaded Toolkit from http://forum.xda-developers.com/showthread.php?t=1703488
2- Flashed Stock Boot Image
3- Flashed Stock Recovery Mode
4- Downloaded stock firmware from http://fus.nanzen.se/
5- Flashed stock firmware using Odin (your method above)
6- Rooted the device again (using odin and CF-Root-SGS3-v6.4)
7- Downloaded and placed cm9 and google apps package in SDCARD
8- Installed Rom Manager from Play Store.
9- Downloaded and Installed ClockWorkMod from rom manager and booted to recovery mode using RomManager
10- Then factory resetted, formatted the cache and installed the CM9 and GAPPS V11
Then my phone was good to go.
My phone is up and running, thanks rsndetre, Arsaw and TecQuality for your replies. I appreciate your time
Thanks
Muzammil Ahmed.
Hi all,
I have a i9100P (with NFC) and it is stuck at the boot screen with the yellow triangle after I installed CWM using this method here:
galaxys2root (DOT) com/galaxy-s2-root/how-to-install-clockworkmod-recovery-on-rooted-galaxy-s2-i9100/
I can still enter Download mode and even the installed CWM, but i cannot boot into android, its just stuck on the screen
I have searched on the internet for a solution, and i cannot find a solution for this
would installing a new ROM via an SD card work? What shall i do?
HELP me PLS!!
thanks in advance!!!!
Carlover1998 said:
Hi all,
I have a i9100P (with NFC) and it is stuck at the boot screen with the yellow triangle after I installed CWM using this method here:
galaxys2root (DOT) com/galaxy-s2-root/how-to-install-clockworkmod-recovery-on-rooted-galaxy-s2-i9100/
I can still enter Download mode and even the installed CWM, but i cannot boot into android, its just stuck on the screen
I have searched on the internet for a solution, and i cannot find a solution for this
would installing a new ROM via an SD card work? What shall i do?
HELP me PLS!!
thanks in advance!!!!
Click to expand...
Click to collapse
Quote taken from site:
Galaxy S2 Reference
You will need a rooted Galaxy S2 to install all ROM/kernels.
NOTE: PLEASE ONLY INSTALL ROMS INTENDED FOR YOUR VERSION OF Galaxy S2! Otherwise you WILL BRICK YOUR PHONE and I will not be responsible! ALL ROMs on this site are ONLY for Verizon Galaxy S2!
First time to rooting and custom ROMs?
Please see our FAQ for your Galaxy S2 model FIRST!!!:
Click to expand...
Click to collapse
I wouldn't have tried this as your phone is i9100P, although I know the difference isn't that big.
Also, was your phone rooted? It had to have been rooted beforehand.
oddlyshapedstickman said:
Quote taken from site:
I wouldn't have tried this as your phone is i9100P, although I know the difference isn't that big.
Also, was your phone rooted? It had to have been rooted beforehand.
Click to expand...
Click to collapse
Hi, yes it was rooted prior to this, but i thought the only difference was that the P version had NFC - but now it seems I am stuck at the boot screen - any ideas? I would appreciate it a lot!
Flash your stock ROM and check it it works.
Stileth said:
Flash your stock ROM and check it it works.
Click to expand...
Click to collapse
Hi, thanks for the reply - i will try flashing it after i finish downloading it. I presume I will have to do the usual wipe data, clear cache etc?
"I searched all over the internet and couldnt find a solution"
Biggest load of crap Ive read on here.
Sent from my GT-I9100 using xda premium
Carlover1998 said:
Hi, thanks for the reply - i will try flashing it after i finish downloading it. I presume I will have to do the usual wipe data, clear cache etc?
Click to expand...
Click to collapse
Yes, that should help. Btw what version you are downloading? 4.0.3 or 4.0.4?
Stileth said:
Yes, that should help. Btw what version you are downloading? 4.0.3 or 4.0.4?
Click to expand...
Click to collapse
I am downloading 4.0.3 from here: devsrom4android.blogspot (DOT)co (DOT) uk/2012/06/i9100pxxlph-o2-uk-samsung-galaxy-s2-gt.html
4.0.3 is what I previously had, and I believe that was the exact firmware I had on the phone (o2 NFC version)
Carlover1998 said:
I am downloading 4.0.3 from here: devsrom4android.blogspot (DOT)co (DOT) uk/2012/06/i9100pxxlph-o2-uk-samsung-galaxy-s2-gt.html
4.0.3 is what I previously had, and I believe that was the exact firmware I had on the phone (o2 NFC version)
Click to expand...
Click to collapse
That's your problem. You were on 4.0.3, which is ICS.
The instructions at galaxys2root.com/galaxy-s2-root/how-to-install-clockworkmod-recovery-on-rooted-galaxy-s2-i9100/ don't specify, but they are for Gingerbread ONLY. The recovery kernel contained within that zip package is ClockworkMod Recovery 4.0.1.4, which is for Gingerbread.
This thread (http://forum.xda-developers.com/showthread.php?t=1118693) is the updated version of that recovery kernel for ICS.
You don't have to flash the full firmware, just flash a kernel that is meant to work with ICS and you should be fine.
ctomgee said:
That's your problem. You were on 4.0.3, which is ICS.
The instructions at galaxys2root.com/galaxy-s2-root/how-to-install-clockworkmod-recovery-on-rooted-galaxy-s2-i9100/ don't specify, but they are for Gingerbread ONLY. The recovery kernel contained within that zip package is ClockworkMod Recovery 4.0.1.4, which is for Gingerbread.
This thread (http://forum.xda-developers.com/showthread.php?t=1118693) is the updated version of that recovery kernel for ICS.
You don't have to flash the full firmware, just flash a kernel that is meant to work with ICS and you should be fine.
Click to expand...
Click to collapse
Thanks for the advice - but i already have the stock ROM on an SD card so i think i will flash this. Problem is i cannot get CWM to read from the external SD card, so i cannot locate the zip and install it - help?
EDIT: if i install the kernel you gave me the link to ([KERNEL][ICS] ClockworkMod Recovery 5.5.0.4) , will it remove the root access i had?
EDIT 2: I have just flashed the kernel via odin, and it finally got past the screen with the yellow triangle! However, it is now stuck on the second screen which shows the 'S' logo with the words 'Samsung Galaxy SII' under it. Any more ideas?
Carlover1998 said:
Thanks for the advice - but i already have the stock ROM on an SD card so i think i will flash this. Problem is i cannot get CWM to read from the external SD card, so i cannot locate the zip and install it - help?
EDIT: if i install the kernel you gave me the link to ([KERNEL][ICS] ClockworkMod Recovery 5.5.0.4) , will it remove the root access i had?
EDIT 2: I have just flashed the kernel via odin, and it finally got past the screen with the yellow triangle! However, it is now stuck on the second screen which shows the 'S' logo with the words 'Samsung Galaxy SII' under it. Any more ideas?
Click to expand...
Click to collapse
Can you boot to recovery? If so, you can try a factory reset/wipe data. You'll lose all your data, (not counting pictures/media) but at this point, do you have anything to lose?
ctomgee said:
Can you boot to recovery? If so, you can try a factory reset/wipe data. You'll lose all your data, (not counting pictures/media) but at this point, do you have anything to lose?
Click to expand...
Click to collapse
I just tried that, i can boot into the new cwm - have nothing to lose since i've only had it for about 3 days - however even after the wipe data, cache and dalvik it is still stuck on the 'S' screen now
Carlover1998 said:
I just tried that, i can boot into the new cwm - have nothing to lose since i've only had it for about 3 days - however even after the wipe data, cache and dalvik it is still stuck on the 'S' screen now
Click to expand...
Click to collapse
Well, now I'd say you need to flash a full firmware. You said you downloaded I9100PXXLPH from here? Should work. But you'll no longer be rooted, and you won't have CWM recovery.
How did you get into this in the first place? You wanted CWM recovery?
ctomgee said:
Well, now I'd say you need to flash a full firmware. You said you downloaded I9100PXXLPH from here? Should work. But you'll no longer be rooted, and you won't have CWM recovery.
How did you get into this in the first place? You wanted CWM recovery?
Click to expand...
Click to collapse
I will be sure to try that, and basically earlier today i rooted it successfully, and then i had to get CWM onto it so i could start flashing new ROMs etc, and i tried installing CWM via that method that has now caused all of this
Never the less i will try your suggestion, so should i basically mount usb from CWM, then copy the firmware over to the phone, unmount, and then wipe, and then flash it finally?
EDIT: it wont allow me to mount USB in CWM
can i just flash the ZIP using odin in download mode, or does it have to be a .tar file?
Carlover1998 said:
I will be sure to try that, and basically earlier today i rooted it successfully, and then i had to get CWM onto it so i could start flashing new ROMs etc, and i tried installing CWM via that method that has now caused all of this
Never the less i will try your suggestion, so should i basically mount usb from CWM, then copy the firmware over to the phone, unmount, and then wipe, and then flash it finally?
Click to expand...
Click to collapse
No. That download is for a package that must be flashed while the phone is in download mode. That will require you to use a computer, and a flashing tool, such as Odin or Heimdall.
ctomgee said:
No. That download is for a package that must be flashed while the phone is in download mode. That will require you to use a computer, and a flashing tool, such as Odin or Heimdall.
Click to expand...
Click to collapse
How would I go about flashing it in download mode, i really have no idea as I don't think you can flash zip files in odin, forgive me for all of the questions I really appreciate your help!
EDIT: I have unzipped the file and hooray lies in it the .tar.md5 file! I am in the middle of flashing this and will report back on results
Thanks a lot guys!!
THANKS GUYS FOR ALL OF YOUR HELP, my SII is now working fully again! Cheers to all that helped, flashing the stock firmware worked with wipe/cache
Can't thank you enough!
Last thing if you don't mind, i want to root it again using this: (http://forum.xda-developers.com/showthread.php?t=1321582)
Now after that, how can i install CWM without getting into the mess i got into today? cheers!
Nope, I think that's for GB. For easy root use method 1 from 1st guide in my signature.
Stileth said:
Nope, I think that's for GB. For easy root use method 1 from 1st guide in my signature.
Click to expand...
Click to collapse
But it appears that this will not give you permanent CWM recovery. Which is what I think he wants.
ctomgee said:
But it appears that this will not give you permanent CWM recovery. Which is what I think he wants.
Click to expand...
Click to collapse
Well I think Chainfire's CF-Root kernels (http://forum.xda-developers.com/showthread.php?t=1103399) are not for i9100P, so not sure if he can achieve permanent CWM recovery. Anyway if he don't plan to flash every hour new ROM he should be fine with latest temporary CWM 6: http://forum.xda-developers.com/showthread.php?t=1840223 although will ask Phil about compatibility.
Hi everyone,
First off I apologize if this is too stupid, but I am a complete newbie at this (yes, I watched the noob video before registering).
I rooted my galaxy s2 GT-I9100 using the Odin insecure kernel --> S2 root --> Odin secure kernel method. Then i installed CWM Rom manager. However it says that I do not have CWM Recovery on the phone, I cannot flash the ROM. So I downloaded recovery-clockwork-4.0.1.5-galaxys2.zip and flashed it to the phone using Odin. It shows PASSED but the phone was stuck at the boot-up screen with the yellow triangle.
I tried to flash the CF-root kernel onto the phone, which many said will solve the problem, however it seems the kernel for this phone "ZSLPE" is very rare (phone purchased in Hong Kong) and I cannot find anything with this particular kernel. Also, when I connect the phone via Odin and try to flash anything, it now gets stuck at "setting up connection", so i suppose even if i find the right kernel, it cannot be loaded onto the phone. Please help! I will be eternally grateful.
yellowtriangle said:
Hi everyone,
First off I apologize if this is too stupid, but I am a complete newbie at this (yes, I watched the noob video before registering).
I rooted my galaxy s2 GT-I9100 using the Odin insecure kernel --> S2 root --> Odin secure kernel method. Then i installed CWM Rom manager. However it says that I do not have CWM Recovery on the phone, I cannot flash the ROM. So I downloaded recovery-clockwork-4.0.1.5-galaxys2.zip and flashed it to the phone using Odin. It shows PASSED but the phone was stuck at the boot-up screen with the yellow triangle.
I tried to flash the CF-root kernel onto the phone, which many said will solve the problem, however it seems the kernel for this phone "ZSLPE" is very rare (phone purchased in Hong Kong) and I cannot find anything with this particular kernel. Also, when I connect the phone via Odin and try to flash anything, it now gets stuck at "setting up connection", so i suppose even if i find the right kernel, it cannot be loaded onto the phone. Please help! I will be eternally grateful.
Click to expand...
Click to collapse
Download .tar (Odin version) version of Siyah kernel here: www.gokhanmoral.com/gm/2012/07/29/siyahkernel-s2-v3-5/
Flash the kernel via Odin.
Ps: asking questions, or even searching could have saved you all these mess because, ROOTING ICS doesn't really require flashing any kernel unlike gingerbread.
Swyped from my Samsung Galaxy SII
yellowtriangle said:
Hi everyone,
First off I apologize if this is too stupid, but I am a complete newbie at this (yes, I watched the noob video before registering).
I rooted my galaxy s2 GT-I9100 using the Odin insecure kernel --> S2 root --> Odin secure kernel method. Then i installed CWM Rom manager. However it says that I do not have CWM Recovery on the phone, I cannot flash the ROM. So I downloaded recovery-clockwork-4.0.1.5-galaxys2.zip and flashed it to the phone using Odin. It shows PASSED but the phone was stuck at the boot-up screen with the yellow triangle.
I tried to flash the CF-root kernel onto the phone, which many said will solve the problem, however it seems the kernel for this phone "ZSLPE" is very rare (phone purchased in Hong Kong) and I cannot find anything with this particular kernel. Also, when I connect the phone via Odin and try to flash anything, it now gets stuck at "setting up connection", so i suppose even if i find the right kernel, it cannot be loaded onto the phone. Please help! I will be eternally grateful.
Click to expand...
Click to collapse
If you're on ICS you can flash siyah kernel for S2(the .tar file) and you'll get custom recovery and root at the same time. Kernel are usually universal you don't need to find the specific kernel for your rom. Only if you're using a 4.0.4 rom you have to use a 4.0.4 kernel same goes for the 4.0.3 because you're going to have bugs with the camera etc
duykhang524 said:
If you're on ICS you can flash siyah kernel for S2(the .tar file) and you'll get custom recovery and root at the same time. Kernel are usually universal you don't need to find the specific kernel for your rom. Only if you're using a 4.0.4 rom you have to use a 4.0.4 kernel same goes for the 4.0.3 because you're going to have bugs with the camera etc
Click to expand...
Click to collapse
Thanks a lot for the reply. I believe the phone was running on ICS 4.0.3. Can I still flash the Siyah kernel? Also it seems that when trying to flash anything with Odin, it gets stuck at "setting up connection" stage and does not proceed.
yellowtriangle said:
Thanks a lot for the reply. I believe the phone was running on ICS 4.0.3. Can I still flash the Siyah kernel? Also it seems that when trying to flash anything with Odin, it gets stuck at "setting up connection" stage and does not proceed.
Click to expand...
Click to collapse
Yeah. Flash the Siyah kernel.
Are you sure kies is not running?
Swyped from my Samsung Galaxy SII
Jokesy said:
Yeah. Flash the Siyah kernel.
Are you sure kies is not running?
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
I exited Kies, so yes I don't think it's running. Plus Odin was able to flash the CWM recovery onto the phone right before it got stuck at the yellow sign. After that it stopped working.
Should I flash the latest version of Siyah (v4.1.4) instead of the one you suggested?
Thanks again
yellowtriangle said:
I exited Kies, so yes I don't think it's running. Plus Odin was able to flash the CWM recovery onto the phone right before it got stuck at the yellow sign. After that it stopped working.
Should I flash the latest version of Siyah (v4.1.4) instead of the one you suggested?
Thanks again
Click to expand...
Click to collapse
Both should work, but i suggest you Flash mine.
Is Odin working now? If not reboot your Pc and try again
Swyped from my Samsung Galaxy SII
Jokesy said:
Both should work, but i suggest you Flash mine.
Is Odin working now? If not reboot your Pc and try again
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
Thanks for all the help. The phone is now back and running. However there is now another problem. After I flashed CM10 jelly bean 4.1.1, Google Play has gone missing. The little shopping bag icon is no longer there and I cannot find it in the app list either. Any help?
yellowtriangle said:
Thanks for all the help. The phone is now back and running. However there is now another problem. After I flashed CM10 jelly bean 4.1.1, Google Play has gone missing. The little shopping bag icon is no longer there and I cannot find it in the app list either. Any help?
Click to expand...
Click to collapse
After you flashed CM10, you were suppose to flash gapps. So flash Gapps now
Hello all,
About a week ago I ran into a problem with my phone which I thought was a software, which actually turned out to be a hardware issue with my sim card. Cutting a long story short, I flashed the official stock rom with Odin V1.85, and it passed and everything was back to default factory settings.
Having now got my issue fixed, I wanted to re-root my phone, in order to go back to the old ROM I was using [UltimaROM v12]. However after flashing various versions of CWM I cannot get my phone to root. I'm no stranger using Odin, I can usually install a new version of CWM in 30 seconds, but my phone is persistent on not rooting. I can't work out if maybe I've done something wrong, but it doesn't seem to be working.
I've tried running as Admin on W7, but it doesn't make a difference, I'd appreciate if one of you guys could help, as I used the search bar before, but it seems no-one has had this problem before.
Modem: XXEMC2
Kernel: Stock
ROM: Stock
Use TWRP or Philz recovery .
jje
I've tried those too, they don't work either.
bkss said:
I've tried those too, they don't work either.
Click to expand...
Click to collapse
Use framaroot aragorn exploit
Sent from my GT-I9300 using xda premium
What exactly is the problem? Phone not recognised? Flash failing? If so at what point? More details please
slaphead20 said:
What exactly is the problem? Phone not recognised? Flash failing? If so at what point? More details please
Click to expand...
Click to collapse
The problem is the recoveries will look as if they've installed fine through Odin getting a "passed" flag, but when I go to recovery it's still the default Android recovery. Therefore no root.
What root method are you using?
Chainfire one I believe. You basically install CWM recovery, then install SuperSU from .zip in CWM.
So you have rooted but can't install recovery?
Just flash one with mobile Odin,
Nope, no root yet, because I can't flash SuperSU.zip 'cause I'm still on the default recovery.
Just use the old cf root then update the recovery or use framaroot and flash recovery with mobile Odin
cf-root roots the phone as well as changes the stock recovery to cwm recovery! is this the exact one you flashed? http://forum.xda-developers.com/showthread.php?t=1695238
sriram231092 said:
cf-root roots the phone as well as changes the stock recovery to cwm recovery! is this the exact one you flashed? http://forum.xda-developers.com/showthread.php?t=1695238
Click to expand...
Click to collapse
I think he is using cf auto root
Okay so I managed to root my phone using this method ; http://forum.xda-developers.com/sho...m.xda-developers.com/showthread.php?t=2116549
And root works. Now I want to get clockworkmod on my phone. I followed some steps on the internet and ended up getting my phone bricked. I managed to get it working again. Can someone please tell me what to do right? I used odin before and that was the cause of my bricking. So i'd rather not use that again.
I went to the clockworkmod/rommanger website and i found the s2 "Download Recovery" thing. If i flash this through the android recovery system will it work?
Help me out here.
Thanks in advance
What do you mean "I want to get cwm on my phone".
That file should root your phone and install cwm.
Are you getting confused because there no icon.
Dont use rommanager as that can have dire effects on a phone.
And next time put in ALL details about your phone;model,rom etc.
xringo said:
Okay so I managed to root my phone using this method ; http://forum.xda-developers.com/sho...m.xda-developers.com/showthread.php?t=2116549
And root works. Now I want to get clockworkmod on my phone. I followed some steps on the internet and ended up getting my phone bricked. I managed to get it working again. Can someone please tell me what to do right? I used odin before and that was the cause of my bricking. So i'd rather not use that again.
I went to the clockworkmod/rommanger website and i found the s2 "Download Recovery" thing. If i flash this through the android recovery system will it work?
Help me out here.
Thanks in advance
Click to expand...
Click to collapse
If you are having official stock 4.1.2 rom then go to settings/about phone and check your baseband and then Go to philz Thread you can search it on XDA . Choose the zip one flash it from recovery you will get CWM.
Hope it helps
Sent from my iPhone using Tapatalk
theunderling said:
What do you mean "I want to get cwm on my phone".
That file should root your phone and install cwm.
Are you getting confused because there no icon.
Dont use rommanager as that can have dire effects on a phone.
And next time put in ALL details about your phone;model,rom etc.
Click to expand...
Click to collapse
I mean , when I boot into recovery its the default android recovery. Not the cwm. Not sure how to explain it but even before i rooted my phone. I had to boot into recovery, and the default android recovery screen comes when you want to flash the zip. After that I re boot into recovery the android one comes, not the cwm. So yeah the icon or the blue-ish recovery screen doesnt appear
Jeetu said:
If you are having official stock 4.1.2 rom then go to settings/about phone and check your baseband and then Go to philz Thread you can search it on XDA . Choose the zip one flash it from recovery you will get CWM.
Hope it helps
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Yes I have 4.1.2. I checked the thread out . My baseband is i9100xxms4 but the thread has only xxms1. Does that matter or?
xringo said:
I mean , when I boot into recovery its the default android recovery. Not the cwm. Not sure how to explain it but even before i rooted my phone. I had to boot into recovery, and the default android recovery screen comes when you want to flash the zip. After that I re boot into recovery the android one comes, not the cwm. So yeah the icon or the blue-ish recovery screen doesnt appear
Click to expand...
Click to collapse
Ok,I know what you mean now.That used to happen with rachmats rooting method;a temp cwm was flashed,and when rebooted,the phone went back to stock recovery.
Several people in the know recommend using pc odin(think you said you didnt want to use it) because it is risky flashing stuff by other methods.If you use odin to do stuff,then that means it is ready to help you out if flashing by cwm or mobile odin goes wrong.
theunderling said:
Ok,I know what you mean now.That used to happen with rachmats rooting method;a temp cwm was flashed,and when rebooted,the phone went back to stock recovery.
Several people in the know recommend using pc odin(think you said you didnt want to use it) because it is risky flashing stuff by other methods.If you use odin to do stuff,then that means it is ready to help you out if flashing by cwm or mobile odin goes wrong.
Click to expand...
Click to collapse
So what can I do? I dont mind flashing cwm with odin as long as I dont brick my phone again. I've already rooted, if i use odin to get cwm , will it cause problems? Is there no other way to get cwm without odin? Maybe flashing a zip?
Yes,Jeetu said earlier.
theunderling said:
Yes,Jeetu said earlier.
Click to expand...
Click to collapse
Probem is my baseband is xxms4 while the philz only has one xxms1. Will it still work?
bump