well
i got an alcatel ot908 3 days ago, i installed clockworldmod recovery and after rooting it, i backed up so i can flash a rom but this didn't worked, rom wasn't working as thephone stucked on the boot screen saying "alcatel one touch" and nothing was happening... so i restrored the backup i had made and everything was fine, yesterday i installed a lot of stuff and i wanted to reset factorysetting so i shutted down the phone and went into recovery screen, i wiped everything but since then the phone stucksagain on the boot screen, tried reseting again to factory settings but nothing, i also wiped cache and other stuff but still won't boot. I tried to restore the backup i already had, the same that i used to restore when i had problem with the rom but it didn't worked. Now for some reason it doesn't even reach the alcatel boot screen, it just shows the android icon and then stucks with a black sccreen and the buttonsenlightened
what do i have to do to get it work again?
Related
So, basically, i rooted my phone(WYNN SK S150) a month ago and flashed a custom ROM onto it. All was well, until yesterday, when i factory reset my phone normally(using the factory reset option in settings and not the clockworkmod way). When the phone restarted, it was stuck into a loop of the boot animation(the animation of the custom ROM logo and not the default ROM) and is practically unusable. I cant access it through my computer(Computer doesnt identify it, just says its an unknown device) and i cant access recovery mode.
NOTE: i have a backup of the default ROM.
Can anyone help?
Hope my phone isn't "bricked"...
I am facing problems with Sero 7. The problem started about two weeks ago when the battery died and the tablet turned off. After charging and booted the table I received a message "Encryption Unsuccessful". At that time tablet was running xboxexpert's SERO ROM. After pressing "reset tablet" (some forums say a big mistake), Nothing happened. The error was still there.
After that tried installing all the ROMs available by xboxexpert, randomblame (new 4.4R6 too) and stock also. Even updated the Recovery originally CWM and now TWRP. But with all the ROMs I am either stuck at the Hisense or Andriod screen or the tablet reboots continuously.
I have tried to wipe everything but still it gets stuck at the Hisense screen or reboots continuously. Even sometimes stuck at blank screen.
If required, Is there anyway to install everything from scratch including boot and recovery.
dogood1 said:
I am facing problems with Sero 7. The problem started about two weeks ago when the battery died and the tablet turned off. After charging and booted the table I received a message "Encryption Unsuccessful". At that time tablet was running xboxexpert's SERO ROM. After pressing "reset tablet" (some forums say a big mistake), Nothing happened. The error was still there.
After that tried installing all the ROMs available by xboxexpert, randomblame (new 4.4R6 too) and stock also. Even updated the Recovery originally CWM and now TWRP. But with all the ROMs I am either stuck at the Hisense or Andriod screen or the tablet reboots continuously.
I have tried to wipe everything but still it gets stuck at the Hisense screen or reboots continuously. Even sometimes stuck at blank screen.
If required, Is there anyway to install everything from scratch including boot and recovery.
Click to expand...
Click to collapse
Any clue.
Hello everyone!
I have a Lenovo a820 with Lambda rom 2.4v.
I'm using it for a couple of weeks now with this last version, and everything was fine, until suddenly it froze for a while, I unplugged the battery and plugged it again, and what I notice was that the phone restored itself to when after I installed the rom (meaning all of the apps were gone).
So I tried going into Google play, installing some apps back, and I get this error -24 telling me its unable to install the app, happened with any app I tried. so after trying a few suggestions from the internet about this error, I decided to format it and install the rom all over again.
I go back to recovery mode with CWM, try to install the lambda rom like I did before, and in the middle of the installation it reboots and gets stuck in the "lenovo" screen like when you boot it. so after waiting for a long time I unplugged and plugged the battery again, went through the procedure again this time it installed it 100% rebooted so it would boot with the mod, and again, it freezes at "lenovo" start screen unable to boot.
went on recovery mode, formatted system, data, emmc, everything... I think that's the issue here. but im not sure.
After that, tried to install again with the same problem.
The problem now is. it won't even start I press the on/off button to start it normally, and I dont even get the "lenovo" screen, I tried going into recovery mode and no luck.
It's like the phone is dead! Although I have another Lenovo A820 and I tried the battery, and its 60% so that's not the battery.
Do you guys know any tricks? or any tools that I could use to get my phone running again?
I would appreciate it very much, any help you can give.
Matt.
MatWho said:
Hello everyone!
I have a Lenovo a820 with Lambda rom 2.4v.
I'm using it for a couple of weeks now with this last version, and everything was fine, until suddenly it froze for a while, I unplugged the battery and plugged it again, and what I notice was that the phone restored itself to when after I installed the rom (meaning all of the apps were gone).
So I tried going into Google play, installing some apps back, and I get this error -24 telling me its unable to install the app, happened with any app I tried. so after trying a few suggestions from the internet about this error, I decided to format it and install the rom all over again.
I go back to recovery mode with CWM, try to install the lambda rom like I did before, and in the middle of the installation it reboots and gets stuck in the "lenovo" screen like when you boot it. so after waiting for a long time I unplugged and plugged the battery again, went through the procedure again this time it installed it 100% rebooted so it would boot with the mod, and again, it freezes at "lenovo" start screen unable to boot.
went on recovery mode, formatted system, data, emmc, everything... I think that's the issue here. but im not sure.
After that, tried to install again with the same problem.
The problem now is. it won't even start I press the on/off button to start it normally, and I dont even get the "lenovo" screen, I tried going into recovery mode and no luck.
It's like the phone is dead! Although I have another Lenovo A820 and I tried the battery, and its 60% so that's not the battery.
Do you guys know any tricks? or any tools that I could use to get my phone running again?
I would appreciate it very much, any help you can give.
Matt.
Click to expand...
Click to collapse
The boot.img must be wrong try rom for your phone.
Sent from my Moto G
My Rooted Nexus 7 was working perfectly. Now I am not sure If it is Soft Bricked or something else is wrong with it, It was charging one day and I took it off one micro usb charger and put it on another Nexus 7 charger. I went back and turned it on, Now it was stuck in bootloop, I have seen bootloops before, but not like this. It turns on and goes to the lock screen, then after a few second it freezes then restarts. I have been able to quickly log in boot into safe mode but it still freezes and restarts, I made it to the app menu once and then it sad , Unfortunately Launcher has stopped, I have cleared the cache and dalvik cache and nothing works, I have bootloader version 4.1.3 and CWM version 6.0.1.9, I have tried to format tablet and factory reset with cwm recovery but when I turn it back on I still see my stuff and I still reboots, I have tried to restore from a backup from a while ago with cwm but it fails. I tried to use nexus toolkit but I dont remember my version and I cant check, I gave it a guess but It can not find my device when plugged in, even in recovery mode, It said something about fastboot but i think i did that but I am not 100% sure what it is, I need to get this workig again fast.
Hi
Rooted my S6, and threw TWRP recovery on, put a "sixperience S7" rom on it, at first it worked flawlessly, but since I didnt make a factory reset i pulled one later, thats when my problems started.
Installs fine, reboots and the initial start and setup goes fine, but when the screen turns off and i wake it up again, the screen looked like a pc screen with no gfx driver, funky colors and very dark - tried two times to make a clean install, same happened
Tried to install stock rom with Odin, failed, tried 3-4 times, fails
Then i went into TWRP and deleted all......but seriously all......coudnt boot into anything then, not even download mode, got the message on the screen that "something went wrong in updating the firmware, try the emergency recovery with Samsung Smart Switch" That of course couldnt connect to the phone, when i finally got it to be recognized by the computer, my phone wasn't supported by the program (because it is rooted i read somewhere)
After an hour with a lot of swearing and crying almost, I tried to connect it to Odin and i got connected, installed a new TWRP and i got it into recovery where i could install a new rom, and the phone booted again
Heres my question, when i put it into download mode (tried to install stock rom with Odin once more) then I cannot boot it again, I have to install TWRP and a new rom before I can get it up and running again, is there any possibility to get a stock rom installed ever again?