Hey guys. A couple days ago I started having connection problems. I was running s-off infection 2.7 when I was having this problem. Turning wifi on results in the toggle getting greyed out, and 4g works, but calls and texts do not. I updated to the latest infection 2.8.1 rom and it was working at first, when the rom first booted up, and then randomly calls and texts stopped working, and the status bar actually shows no bars, but 4g still works from time to time. I think I need to reflash the newest radio for it. The one I am currently running is 2.22.10.0801r. If anyone has a newer one or the same radio that is flashable from amonra recovery that would be helpful. Thank you.
wailer247 said:
Hey guys. A couple days ago I started having connection problems. I was running s-off infection 2.7 when I was having this problem. Turning wifi on results in the toggle getting greyed out, and 4g works, but calls and texts do not. I updated to the latest infection 2.8.1 rom and it was working at first, when the rom first booted up, and then randomly calls and texts stopped working, and the status bar actually shows no bars, but 4g still works from time to time. I think I need to reflash the newest radio for it. The one I am currently running is 2.22.10.0801r. If anyone has a newer one or the same radio that is flashable from amonra recovery that would be helpful. Thank you.
Click to expand...
Click to collapse
Here is the latest Firmware for the rez.
http://www.androidfilehost.com/?fid=13858035200388235270
Keep in mind, this is not the radio only it is the Firmware update (radio, hboot, latest stock recovery Ect..)
Must be Renamed to PH98IMG and flashed from Sd card
Ok. Thank you. Do you know what radio version is included in this? I was hoping for just a flashable radio I could try instead of the entire firmware...
wailer247 said:
Ok. Thank you. Do you know what radio version is included in this? I was hoping for just a flashable radio I could try instead of the entire firmware...
Click to expand...
Click to collapse
2.23.10.0123r/2.23.10.0124r
wailer247 said:
Ok. Thank you. Do you know what radio version is included in this? I was hoping for just a flashable radio I could try instead of the entire firmware...
Click to expand...
Click to collapse
Here's a link to the updated firmware (including radios) but with boot.img and recovery removed so you don't lose root or data. A link to download just the radios is also somewhere in the same thread.
Edit: It would probably be better if I actually pasted the link.
http://forum.xda-developers.com/showthread.php?p=40767819
Dancershrink said:
Here's a link to the updated firmware (including radios) but with boot.img and recovery removed so you don't lose root or data. A link to download just the radios is also somewhere in the same thread.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=40759366&postcount=22
Great Thank you!!
EDIT: For some reason after flashing this my baseband version shows 2.23.10.0123r, 2.23.10.0803r. Calls/text/4g are working now, but I also replaced the back housing with another I had lying around. Wifi still does not show any networks and stays greyed out. Any ideas?
Related
Just installed CM7 from Rom Manager and I have no service. I tried turning on airplane mode and now its stuck in Airplane mode! Pulled battery and SIM, but still nothing.
Did you install the correct radio to correspond with the build of CM7 you installed?
Sent from my HTC Thunderbolt
JBO1018 said:
Did you install the correct radio to correspond with the build of CM7 you installed?
Sent from my HTC Thunderbolt
Click to expand...
Click to collapse
I guess not. How do I know what radio to install and how? Do I install new radio before CM7? TIA
Can I flash A radio with CM7 already installed?
Hurlee555 said:
Can I flash A radio with CM7 already installed?
Click to expand...
Click to collapse
Yes but it's flashed via bootloader.
See http://forum.xda-developers.com/showpost.php?p=15765065&postcount=8
That includes a link to the OTA mr2 thread also
I am having a similar issue
After doing a backup of the stock rom and installing CM7 I had service but very little compared to the stock rom & radio that got full service in the exact same location. I tried to install the radio for 4g and followed those instructions but then it said my sim wasnt installed. I wiped again including cach and reinstalled CM7. I had to use the above link to get the radio somewhat working again but the service still sucks.
is there another radio out there that will work better?
sometimes when i install a AOSP ROM it'll show no service to. although after rebooting, then it works.
I tried rebooting over and over, never came back untill i pushed the above radio in from hboot. It still shows nearly no service although it does have some. I had the same problem with my inspire 4g untill i found the right radio that worked perfect.
I went across town to the area I get the best service and it still only shows 2 bars max
I need help badly.....I am using Evo 3d Gsm (Root,Unlock,S-off,Hboot 1.49.007) and this [ROM] CM 10 Gangnam Style. My 3g is not working if it is running for like 20 minutes even the 3g icon is still there. Also my phone some time getting very laggy and freeze...i have to lock the screen and turn it on to get this issue away....any1 can help me with this issue?? Many thanks....
hongsydney said:
I need help badly.....I am using Evo 3d Gsm (Root,Unlock,S-off,Hboot 1.49.007) and this [ROM] CM 10 Gangnam Style. My 3g is not working if it is running for like 20 minutes even the 3g icon is still there. Also my phone some time getting very laggy and freeze...i have to lock the screen and turn it on to get this issue away....any1 can help me with this issue?? Many thanks....
Click to expand...
Click to collapse
Data drops are a common issue on cm10 jb Roms, I would suggest using agrabren disarmed toaster version 67 , or helicopters 88 cm10 nightlies
Sent from my IdeaTabA2109A using Tapatalk HD
I'm using the same cm10 and it's ok.
Did you wipe all partitions first (except sd) and then install it?
Also you have to install the correct version of gapps. 20121011 i think it was. It's linked to from the op of the thread.
Also your touch screen issues with the Evo 3d could very likely be hardware related. I've had to have that fixed twice at the Sprint store. It's a known issue.
when rewinding video on IMDB says "can't play this video"
Thank mojo
mojomojo_man said:
I'm using the same cm10 and it's ok.
Did you wipe all partitions first (except sd) and then install it?
Also you have to install the correct version of gapps. 20121011 i think it was. It's linked to from the op of the thread.
Also your touch screen issues with the Evo 3d could very likely be hardware related. I've had to have that fixed twice at the Sprint store. It's a known issue.
Click to expand...
Click to collapse
Thank mojo for your reply....i did full wipe ( Wipe data/reset + Cach and davik + format partrition without sdcard) before install..About the laggy....it happens not only on my phone but on my friend phone that i try to install this rom on also...so i think this is not relating to hardware....i will try to reflash and choose the right Gapps to see if this fix the issue and report back..
No problem. Also you should be S-Off with any hboot except 1.58.
I did wire trick then flashed jbear 1.58 then downgraded to 1.50 jbear. Then did full wipe and flashed gangnam style cm10. My radio firmware was already up to date. Maybe you should first take the extra time to put it back to stock with ruu just to make sure your radios and everything are most recent? If you have the patience you could try to follow QADERSO (quick and dirty...) guide to returning to stock then doing root and s-off and jbear. Just add final step of downgrading to jbear 1.50 by downloading it to your sdcard and renaming it to PG86IMG.ZIP then going into bootloader once. Then you can wipe and install cm10. Also I use 4ext touch recovery and highly recommend it.
Doing all that should guarantee you are identical to me. There are still some issues with this ROM but not the serious ones you describe.
Problems I'm having are the camera resolution or ratio is weird (i get black bars above and below) and if i connect wifi with 4G on then the 4G goes into some kind of loop connecting then disconnecting then disable and enable adapter and repeat. CM10 power control in notification bar for 4g is kind of spotty too. I'll pay with it for a while longer before making a final decision but I think so far the pros outweigh the cons. I did find also that i was using tons more internal storage and ran out of space for my apps so i partitioned my sd card and have it a 3gb ext4 partition and installed Links2SD app and now have lots of space for apps. Maybe one of these days I'll write a guide for the whole process.
Found a bigger issue with this ROM and updating to today's release did not help. /data partition is filling up because wimax is running in debug mode or something. /data/wimax/logs directory is filling up quickly while wimax is on. I had 700mb from less than 24 hrs.
I cleaned them up manually but will need to schedule a batch job to delete it or figure out how to stop generating the logs...
mojomojo_man said:
Found a bigger issue with this ROM and updating to today's release did not help. /data partition is filling up because wimax is running in debug mode or something. /data/wimax/logs directory is filling up quickly while wimax is on. I had 700mb from less than 24 hrs.
I cleaned them up manually but will need to schedule a batch job to delete it or figure out how to stop generating the logs...
Click to expand...
Click to collapse
Known issue. Just "flash" the attached zip file from recovery which will delete/recreate that directory then mark it immutable so no more logs accumulate.
ramjet73
I had a couple of questions if anybody has had experience with such, first one...
Has anyone tried to use the Acid audio RLA5 sound mod and if so, I've heard that having a eq already in the ROM makes it
all goofy for install? Is this true and if so, has anyone else used this mod and what procedure did you do?
As for the second part, has anyone had any luck finding a full inverted gapps that everything will work? I thought I found one but it didn't have contacts inverted, then found another but it crashed google now. If anyone has had any luck could you drop me a link. ( all gapps including mms etc..)
On the 3rd part of the adventure of swapping out apks, I updated google ears via alert from playstore and it crashes something else.. LOL. Its just a never ending battle. But, through the day I found a piece here and there and now it all seems to be working and all inverted and that is after updating what play store wanted to.
Right now creating a flashable.zip that should work but not certain on the rules as to post. I already have a pre- written statement that announces that I take no credit in the creation and also name the Devs responsible and also will be linking their threads as well but not sure if that is enough. If anyone has any input that would be greatly appreciated.
Thanks,
Z.
thank Mojo
mojomojo_man said:
No problem. Also you should be S-Off with any hboot except 1.58.
I did wire trick then flashed jbear 1.58 then downgraded to 1.50 jbear. Then did full wipe and flashed gangnam style cm10. My radio firmware was already up to date. Maybe you should first take the extra time to put it back to stock with ruu just to make sure your radios and everything are most recent? If you have the patience you could try to follow QADERSO (quick and dirty...) guide to returning to stock then doing root and s-off and jbear. Just add final step of downgrading to jbear 1.50 by downloading it to your sdcard and renaming it to PG86IMG.ZIP then going into bootloader once. Then you can wipe and install cm10. Also I use 4ext touch recovery and highly recommend it.
Doing all that should guarantee you are identical to me. There are still some issues with this ROM but not the serious ones you describe.
Problems I'm having are the camera resolution or ratio is weird (i get black bars above and below) and if i connect wifi with 4G on then the 4G goes into some kind of loop connecting then disconnecting then disable and enable adapter and repeat. CM10 power control in notification bar for 4g is kind of spotty too. I'll pay with it for a while longer before making a final decision but I think so far the pros outweigh the cons. I did find also that i was using tons more internal storage and ran out of space for my apps so i partitioned my sd card and have it a 3gb ext4 partition and installed Links2SD app and now have lots of space for apps. Maybe one of these days I'll write a guide for the whole process.
Click to expand...
Click to collapse
thank Mojo again for a very clear instruction....I have a question:
1) Is it true that i get my radio update to version 11.77 (it is 10.xx at the moment) when i install this RUU file (RUU_SHOOTER_U_ICS_35_S_HTC_Europe_3.28.401.1_Radio_11.77.3504.00U_11.25.3504.06_M_release_262714_signed.exe).
2)Will my Hboot change after this install??? and also my phone come back to S-on????
3)When i do this install with this file PG86IMG.zip from bootloader then it will get hboot change as far as i know right....???
IF my knowledge was correct, i will give it a try to install the RUU file to update my phone's radio back to 11.77 (it was 11.77 before i did the downgrade hboot to 1.49.007 from 1.53.xx) then install Gangnam Style rom to see if the 3g issue go away....
If i was wrong that when i install the RUU, my phone will be S-on again...im so lazy to try this because i will stick with Viper3d sense 4.1 then...
1 more thing mojo...i am using the latest disarm toaster rom (DisarmedToaster-0.2.9-67-shooteru)
ramjet73 said:
Known issue. Just "flash" the attached zip file from recovery which will delete/recreate that directory then mark it immutable so no more logs accumulate.
ramjet73
Click to expand...
Click to collapse
Thanks ramjet. Actually I already switched to the AOKP release (Linaro build) which is very similar to the ROM mentioned in this topic and doesn't have the Wimax log issue but hopefully that zip is out there for others to find because I didn't see it in the dev thread for that ROM at least not at the time I mentioned it above anyway. There's a few small Q's I have about this AOKP ROM but I should start a new topic for those.
mojomojo_man said:
Thanks ramjet. Actually I already switched to the AOKP release (Linaro build) which is very similar to the ROM mentioned in this topic and doesn't have the Wimax log issue but hopefully that zip is out there for others to find because I didn't see it in the dev thread for that ROM at least not at the time I mentioned it above anyway. There's a few small Q's I have about this AOKP ROM but I should start a new topic for those.
Click to expand...
Click to collapse
If you are referring to mazda's AOKP ROM it does have the same problem with wimax logs accumulating and there is link to a post after the last question in the FAQ that has the same zip file I linked in this thread.
ramjet73
hongsydney said:
thank Mojo again for a very clear instruction....I have a question:
1) Is it true that i get my radio update to version 11.77 (it is 10.xx at the moment) when i install this RUU file (RUU_SHOOTER_U_ICS_35_S_HTC_Europe_3.28.401.1_Radio_11.77.3504.00U_11.25.3504.06_M_release_262714_signed.exe).
2)Will my Hboot change after this install??? and also my phone come back to S-on????
3)When i do this install with this file PG86IMG.zip from bootloader then it will get hboot change as far as i know right....???
IF my knowledge was correct, i will give it a try to install the RUU file to update my phone's radio back to 11.77 (it was 11.77 before i did the downgrade hboot to 1.49.007 from 1.53.xx) then install Gangnam Style rom to see if the 3g issue go away....
If i was wrong that when i install the RUU, my phone will be S-on again...im so lazy to try this because i will stick with Viper3d sense 4.1 then...
1 more thing mojo...i am using the latest disarm toaster rom (DisarmedToaster-0.2.9-67-shooteru)
Click to expand...
Click to collapse
That RUU file is for Europe.... Are you in Europe? Is that a GSM phone? If so I'm afraid I can't advise about radio firmware versions. Firmware for radio is probably different for European users and the guide which I was referencing is Ramjet's guide found here: http://forum.xda-developers.com/showthread.php?t=1889438 but that guide is for Sprint or Virgin Mobile users (CDMA phones). Basically the guide is accurate I think for European user too but the RUU file should be different. Well, you should consult Ramjet on that as he wrote the guide and may know more. Also, you are correct that running the RUU will return the phone almost completely to stock. It replaces radio firmwares and HBOOT and will put you back to non-root. I just suggested it as a way to make sure you go completely back to stock and start from scratch so I can be sure you were on same versions of everything as me but if you are in Europe you cannot exactly follow it maybe. Anyway, I think you have explained all your issues though. By the sound of it you probably flashed USA (Sprint) radio firmware by accident when you downgraded your HBOOT. Next time you downgrade HBOOT you should make sure the file you are using is HBOOT only with NO radio firmwares in it.
So I think you have two options....
1.) To go back to stock using latest Europe RUU, root/S-OFF phone again (S-OFF might stay, I forget), put 4EXT back and then try to downgrade HBOOT to a compatible version again. This time you must downgrade without changing radios or if you can find a flashable zip with just your proper European 11.77 radios then you can flash just the radios back to 11.77 after downgrade. I don't know the version numbers for GSM phones for HBOOT or radios so I apologize if I am getting this wrong.
2.) Assuming your only problem is the 3g connection currently then maybe you can just find a flashable zip which will update only your radio firmware back to 11.77 without having to go completely back to stock. If everything else about the phone seems OK then this is definitely faster assuming you can find the right file.
Again, I know little about GSM phones and European radios so you may want to find a more knowledgeable person to help you. Definitely though if you flashed the wrong radios then you will lose your 3G connection! I have seen HBOOT's posted both with and without radio firmwares included so I think from now on you must be extra careful when flashing HBOOT to make sure you are not changing radios to USA radios and you should keep around a flashable zip with only your 11.77 radios in it so you can fix this as it may happen again.
Good luck!
If you read the developer's thread carefully you'll notice that he affirmed that data drops will occur.
ramjet73 said:
If you are referring to mazda's AOKP ROM it does have the same problem with wimax logs accumulating and there is link to a post after the last question in the FAQ that has the same zip file I linked in this thread.
ramjet73
Click to expand...
Click to collapse
Yes, Mazda's rom is the one I am using now. I wiped everything, then flashed 3.5 and then immediately did incremental to 3.5.2 then gapps of course and wiped dalvik and rebooted into rom. I checked and wimax logs were not accumulating like they had been. I just checked again and there are only some small "sequansd##.log" files in that directory but these files are tiny (about 9kb) each. I suppose it could become a problem after many months of use but when I was using the Gangnam Style CM10 rom mentioned in the title I filled the remainder of my /data partition in a single day with a ton of 500K files (forgot the name of the file) in addition to the sequansd files. So I guess these logs if not rotated could eventually become a problem but the severity of the issue is nowhere near on the same scale with a clean install Mazda's 3.5.2.
I just set the /data/wimax/logs folder permissions to 440 and deleted the sequansd log files so I think that will suffice? If not I'll flash the zip. I'm just being lazy.
BTW, thanks for your posts in Mazda's thread (using Power Toggles now and I love it) and your QADERSO guide. Both have been very helpful to me.
That ROM is known to have data drops on a mobile network. You can't do anything about it as the ROM is built that way. The only fix would be for the developer to fix it or for you to chanhe ROM.
Goodluck!
mojomojo_man said:
I just set the /data/wimax/logs folder permissions to 440 and deleted the sequansd log files so I think that will suffice? If not I'll flash the zip. I'm just being lazy.
Click to expand...
Click to collapse
Logs were still being written even when people changed permissions. The only way to stop the logs was to make the folder immutable. I flash the zip as part of my install.
mojomojo_man said:
That RUU file is for Europe.... Are you in Europe? Is that a GSM phone? If so I'm afraid I can't advise about radio firmware versions. Firmware for radio is probably different for European users and the guide which I was referencing is Ramjet's guide found here: http://forum.xda-developers.com/showthread.php?t=1889438 but that guide is for Sprint or Virgin Mobile users (CDMA phones). Basically the guide is accurate I think for European user too but the RUU file should be different. Well, you should consult Ramjet on that as he wrote the guide and may know more. Also, you are correct that running the RUU will return the phone almost completely to stock. It replaces radio firmwares and HBOOT and will put you back to non-root. I just suggested it as a way to make sure you go completely back to stock and start from scratch so I can be sure you were on same versions of everything as me but if you are in Europe you cannot exactly follow it maybe. Anyway, I think you have explained all your issues though. By the sound of it you probably flashed USA (Sprint) radio firmware by accident when you downgraded your HBOOT. Next time you downgrade HBOOT you should make sure the file you are using is HBOOT only with NO radio firmwares in it.
So I think you have two options....
1.) To go back to stock using latest Europe RUU, root/S-OFF phone again (S-OFF might stay, I forget), put 4EXT back and then try to downgrade HBOOT to a compatible version again. This time you must downgrade without changing radios or if you can find a flashable zip with just your proper European 11.77 radios then you can flash just the radios back to 11.77 after downgrade. I don't know the version numbers for GSM phones for HBOOT or radios so I apologize if I am getting this wrong.
2.) Assuming your only problem is the 3g connection currently then maybe you can just find a flashable zip which will update only your radio firmware back to 11.77 without having to go completely back to stock. If everything else about the phone seems OK then this is definitely faster assuming you can find the right file.
Again, I know little about GSM phones and European radios so you may want to find a more knowledgeable person to help you. Definitely though if you flashed the wrong radios then you will lose your 3G connection! I have seen HBOOT's posted both with and without radio firmwares included so I think from now on you must be extra careful when flashing HBOOT to make sure you are not changing radios to USA radios and you should keep around a flashable zip with only your 11.77 radios in it so you can fix this as it may happen again.
Good luck!
Click to expand...
Click to collapse
WOW.....i think i got the wrong Rom downgrading my Hboot to 1.49.007......My phone's radio was 11.77.3504.00U_11.25.3504.06 and Hboot=1.53.......After i tried to S-off and downgrade hboot to 1.49.007....my phone radio is 10.53.9020.00U_10.13.9020.08 at the moment and it is working fine with my rom Viper3d R310. Also i live in asia Vietnam......
Mojo....do you think i should get my radio back to 11.77 even my phone is working fine with this radio 10.53,??? i really dont know where can i look up the file for the radio only??/ and how to install it....anyone here can help me with the correct file for the radio???
Yup. You're right. Still accumulating. I'll flash the zip. Although it's probably just a debug setting somewhere that needs to be flipped off. Could be in kernel or in the module loading. Although I'm thinking in Linux terms. Not sure how much of that really translates to android and I'm not about to start mucking around compiling my own kernel.
mojomojo_man said:
Yup. You're right. Still accumulating. I'll flash the zip. Although it's probably just a debug setting somewhere that needs to be flipped off. Could be in kernel or in the module loading. Although I'm thinking in Linux terms. Not sure how much of that really translates to android and I'm not about to start mucking around compiling my own kernel.
Click to expand...
Click to collapse
This issue first surfaced in agrabren's disarmed toaster CM10 ROM and he didn't offer another solution, so I have to believe that any thing other than what has already been suggested would not be trivial.
ramjet73
***Pre warning***
Turning your phone s-off gives you a chance of bricking your phone. I am not responsible if you try these steps and have problems. Also you will loose all your data as you will be wiping your phone multiple times. Make sure to backup all your data (I used Titanium backup) OK?! :good:
I had done a ton of research trying to fix the GPS on my HTC Jewel and never found a solution that worked. Issue was the GPS would not lock. I was originally running MeanRom, then JellyBam, and finally switched to CM10.1 nightly builds, all with no GPS. Last night though I finally fixed it and wanted to post this for anyone else having this problem.
Prior to last night here is how my phone was setup:
S-On
Hboot 1.19
Radio 1.12.11.0890
CM10.1 20130224
I saw that HTC released a new update, and started digging on how to update when on a custom ROM. I realized that I needed to go s-off which I had tried last year with LazyPanda, but it failed.
Last night I was able to go S-Off following directions from FacePalm: http://forum.xda-developers.com/showthread.php?t=2163013
It was a lot easier than DirtyRacoon and I'm running Win7x64 which DirtyRacoon says is not supported by them.
Once I was s-off I downloaded the latest Radio 1.12.11.1210 from: http://themikmik.com/showthread.php?13192-RADIOS-RECOVERY-FLASHABLE-Jewel-Radio-Collection
I confirmed that the radio upgraded successfully and rebooted. I was then prompted to activate my phone, and when I tried to activate it gave me the error that I was not authorized! With some help from the FacePalm IRC channel I was pointed to having to flash stock to be able to re-activate and then flash again back to your custom ROM.
I downloaded and flashed with Stock_Rooted_Deodexed_2.13.651.1 found here http://themikmik.com/showthread.php?14585-ROM-Kernel-2-13-651-1-Stock-Rooted-Based-on-Latest-OTA-(Odexed-and-Deodexed)
Booted and re-activated, and confirmed GPS working! Then I re-flashed with CM10.1 20130228 and GPS was still working!
I hope this helps others as I have seen a lot of forums with people complaining about the HTC Jewel GPS and saying it's faulty hardware, unfixable, or their fixes are all in app software related.
Thanks!
One thing that I would like to add is if you go stock, do NOT turn off your GPS after you get a lock. I usually have GPS turned off to save battery, but it was the reason why the new ROMs couldn't get a signal.
So to recap
1. Go back to stock
2. Get any old signal even for just a second
3. Immediately flash your new ROM without turning off GPS
4. Enjoy
This indeed works.
I don't like Sense-Based ROMs, so the first thing I did after getting my Jewel was S-Off, and I'm running AOKP. The GPS was driving me crazy, and I couldn't figure out how to get it working.
I updated my radio, flashed a sense-based ROM, locked GPS, then reverted back to AOKP, and it works flawlessly!
This method works!
Is this really a fix? You described how to s-off and go back to a stock Rom. Are you saying that custom roms don't lock fast enough, if so I've experienced this too. I don't see how going back to stock then flashing a custom Rom would fix that.
The way I fixed the problem before was to flash back to sense, clear maps data and flash back to CM10.1. Voilà
I use waze
xlxcrossing said:
Is this really a fix? You described how to s-off and go back to a stock Rom. Are you saying that custom roms don't lock fast enough, if so I've experienced this too. I don't see how going back to stock then flashing a custom Rom would fix that.
Click to expand...
Click to collapse
The only reason you have to go back to stock is to re-activate your phone.
xlxcrossing said:
Is this really a fix? You described how to s-off and go back to a stock Rom. Are you saying that custom roms don't lock fast enough, if so I've experienced this too. I don't see how going back to stock then flashing a custom Rom would fix that.
Click to expand...
Click to collapse
pbedard said:
I use waze
Click to expand...
Click to collapse
So do I, but before I did this waze just searched for GPS signal.
So, i am hoping somebody here has experienced my issue when trying to update the radio because i am out of ideas on how to upgrade mine.
S4 Developer Edition with MDK bootloader
I am trying to upgrade my radio from MDK to MK2 or newer but when i do my phone has several issues after rebooting. On a TW 4.4.2 ROM my phone starts up ok but then everything is extremely lagged. My lock screen takes several seconds to respond and once i try to call my dialer takes forever also. Then when i do call my phone stays black and even though it connects the call there is no voice. On top of that it wont end the call. Basically severely lagged. As soon as i flash back to MDK radio everything works perfectly fine. I have no issues flashing the latest modems and the only issues are with the radio. Since i can flash back to MDK radio/modem i know i have the correct files and steps in flashing with ODIN.
Now, if i try and flash an AOSP/AOKP rom like Sonic i no longer have any lag at all and everything comes up quick. I can also call out no problem but the phone doesnt pick up incoming calls at all. I dont even get a missed call notification.
I dont recall ever messing with my bootloader so the best i can figure is there is a step i am overlooking with my radio. I use PHONE option with flashing only the radio and PDA when flashing the combined radio/modem files.
Any help would be appreciated.
Thank you
Ch83 said:
So, i am hoping somebody here has experienced my issue when trying to update the radio because i am out of ideas on how to upgrade mine.
S4 Developer Edition with MDK bootloader
I am trying to upgrade my radio from MDK to MK2 or newer but when i do my phone has several issues after rebooting. On a TW 4.4.2 ROM my phone starts up ok but then everything is extremely lagged. My lock screen takes several seconds to respond and once i try to call my dialer takes forever also. Then when i do call my phone stays black and even though it connects the call there is no voice. On top of that it wont end the call. Basically severely lagged. As soon as i flash back to MDK radio everything works perfectly fine. I have no issues flashing the latest modems and the only issues are with the radio. Since i can flash back to MDK radio/modem i know i have the correct files and steps in flashing with ODIN.
Now, if i try and flash an AOSP/AOKP rom like Sonic i no longer have any lag at all and everything comes up quick. I can also call out no problem but the phone doesnt pick up incoming calls at all. I dont even get a missed call notification.
I dont recall ever messing with my bootloader so the best i can figure is there is a step i am overlooking with my radio. I use PHONE option with flashing only the radio and PDA when flashing the combined radio/modem files.
Any help would be appreciated.
Thank you
Click to expand...
Click to collapse
Flash the radio in recovery and see how it works
ebsk8er06 said:
Flash the radio in recovery and see how it works
Click to expand...
Click to collapse
Thank you.
I wasnt aware there was a zip version of the radio. All i have seen here is for the modem. Could you please link me the reference for the zip flashable radios?
Ch83 said:
Thank you.
I wasnt aware there was a zip version of the radio. All i have seen here is for the radio. Could you please link me the reference for the zip flashable radios?
Click to expand...
Click to collapse
Here you go.
http://forum.xda-developers.com/showthread.php?t=2487298
I tried flashing in recovery and it has no affect. Several tries and baseband doesnt change even though flash says successful. Thanks for the suggestion though.
I also tried to flash the zip while reflashing ROM but that had no affect either. in recovery says successfully flashed but baseband remains unchanged.
Hello everybody, i have been fighting with my htc for a few days now and there is no way i can make it work. I have the at&t version, i have managed to root, install custom recovery and customs roms. All i want is to have a rom that doesnt have all the at&t thrash and that lets me share mobile network(phone is gsm unlocked). I have installed the custom rom, but for my surprise the WiFi didnt turn on, no matter what a I did. Already tried with a lot of roms.
I have:
-Unlocked bootloader
-TWRP
-Software number: 1.58.502.1
-S-ON.... Firewater wont work to turn it off.
Any ideas? I just want to install a stock rom with working wifi thanks
This has been discussed in many threads. Your firmware is outdated for the ROMs you are trying.
Try older ROMs. Or else s-off with sunshine and update your firmware.
What hboot and radio baseband?
@worms45
http://forum.xda-developers.com/showthread.php?t=2752956
AT&T HTC ONE M8
@redpoint73
wich one? i have tried a lot really. My hboot: 3.16.0.0000 radio: 1.16.21331931.LA11G
@jball
just installed that one, didnt work, every sencond got popups saying: "nfc stopped working" for example, everything stopped working, thanks god i had a backup.
Will this one work? http://forum.xda-developers.com/showthread.php?t=2702074
Thanks
I suggest staying on 4.4.2 version of roms, you have to flash the boot image manually I believe with s-on. revert back to stock 1.58.502.1 system and recovery relock your bootloader and flash the 2.23.502 ruu
worms45 said:
@redpoint73
wich one? i have tried a lot really. My hboot: 3.16.0.0000 radio: 1.16.21331931.LA11G
Click to expand...
Click to collapse
Your hboot and radio correspond to 1.x software, or Android 4.4.2, so you should stick with ROMs based on that, as also mentioned by Wonders_Never_Cease.
worms45 said:
@jball
just installed that one, didnt work, every sencond got popups saying: "nfc stopped working" for example, everything stopped working, thanks god i had a backup.
Click to expand...
Click to collapse
Weird. It should work. Were you sure to do a full wipe before flashing (wipe data, Dalvik and cache in recovery)?
worms45 said:
Will this one work? http://forum.xda-developers.com/showthread.php?t=2702074
Click to expand...
Click to collapse
It should.
I installed this one http://forum.xda-developers.com/showthread.php?t=2702074 a few hours ago, everything worked fine... But the music wont work, at first it worked fine, but now it doesnt sound, its pretty weird. No error, it plays the music but its like muted, everything else works, videos, ringtones, etc.
So i just have to install 4.4.2 based rom?
Any rom you guys would recommend? All i see are 4.4.4 or 4.4.3... I need a 4.4.2! Thanks for your help
worms45 said:
I installed this one http://forum.xda-developers.com/showthread.php?t=2702074 a few hours ago, everything worked fine... But the music wont work, at first it worked fine, but now it doesnt sound, its pretty weird. No error, it plays the music but its like muted, everything else works, videos, ringtones, etc.
So i just have to install 4.4.2 based rom?
Click to expand...
Click to collapse
Harmon Kardon audio causes audio bugs if the correct HK firmware is not installed.
Go to post #4 of the Skyfall thread and there you will see a link to a flashable zip to disable HK.
Or try GoldenEye. I was on this for a long time when the phone first came out: http://forum.xda-developers.com/showthread.php?t=2705640
redpoint73 said:
Harmon Kardon audio causes audio bugs if the correct HK firmware is not installed.
Go to post #4 of the Skyfall thread and there you will see a link to a flashable zip to disable HK.
Or try GoldenEye. I was on this for a long time when the phone first came out: http://forum.xda-developers.com/showthread.php?t=2705640
Click to expand...
Click to collapse
Oh thanks mate, disabling the HK made my audio work, but speakers sound terrible :S. Any way to be able to install the recent roms on my phone? Do i have to pay for sunshine?
And im downloading goldeneye rom, i hope it works fine! Will tell you as soon as i have it installed
worms45 said:
Any way to be able to install the recent roms on my phone? Do i have to pay for sunshine?
Click to expand...
Click to collapse
You can return to stock ROM and recovery, and install the 4.4.4 OTA when it comes out (rumor is mid-November, so possibly any time now). This will update your firmware.
Great, i have a backup of the original rom the phone came with so i will update it when the OTA rolls out