Firmware question - AT&T HTC One (M7)

I have a firmware question that I can't seem to find the answer to by searching. I ask running arhd 11 on an att HTC one. Should I upgrade the firmware on my phone? Will there be any benefits to this since I am on att and not international? Also how do I go about updating the firmware and does it wipe the device? Longtime Samsung user so please excuse the noobness.

I would hold off with updating firmware as there are issues with some ROM's and recoveries and the touchpad drivers in the latest firmware. A firmware install doesn't wipe the device.

I just updated mine to 2.24 last night. A few issues at first (mainly with TWRP and recoveries after flashing), but found a great guide that made it all easy.
I don't know if I'd do it again. Now that I'm finished, I don't have any issues at all but I suppose if its not broke don't fix it. I worried I bricked my phone last night when I did something wrong, but ultimately I figured it out with lots and lots of reading. I don't really notice anything different, but, if you're like me and have to have the latest and greatest, it can be a hard itch to scratch. You'd also want to upgrade to ARHD 12, since it would match the firmware version you're going to be upgrading to. IIRC 11 isn't based on the 2.24 fw.
If you want to do it, use vomer's guide here. Follow it to a T, including the TWRP download. You HAVE To download the TWRP from his link. The one from the official page loses touch with the new firmware (one of the issues that took me an hour to figure out). You'll also have to be S-Off, which is going to open a whole new can of potential issues, so be aware what that means and what you have to be careful of.

I did the same as @Eradik using the same methods. Like he said, follow them exactly (not hard to do) and use vomers twrp recovery (as the touch drivers are fixed in it).
The main difference I noticed was much better capacitive button response and when coupled with arhd 12 a very response experience. Other than that I'm not sure if there really are any noticsble benefits but it really isn't difficult to do at all and you don't lose anything with vomers method.
Sent from my HTC One using Tapatalk 4 Beta

Related

[Q] unroot for OTA???

I've rooted my GT 10.1 but I have two questions that I can't find the answer.
1. Has anyone discovered how to unroot back to stock?
2. If rooted, will I be able to get the OTA of touchwiz by checking for updates under settings?
PS I flashed the TouchWiz UX found in this forum. Got to say it is really nice and I can't wait to get the version from Sammy. I then restored a backup using Rom Manager and restored fine except when checking for software updates. It used to say no update available, but today it says failed to connect to servers. Anyone else getting this error?
I guess that is actually 3 questions.
Thanks
1. Unrooting is pretty simple. Just flash the 3.1 OTA in the dev forum, after doing a full wipe. If you feel the need to go back to full stock, you'll also want to nvflash back to the original retail recovery, which you undoubtedly saved when you first rooted.
2. No one knows yet, but rest assured, within a day (less probably) of the update being released, it'll be available here as a rooted flashable ROM. If you learn one thing from your time on XDA, it should be "never accept an OTA update." Let the devs pull it apart and repackage it in a nice root-safe download.
Undoubtedly! (I wish) I wasn't planning to root but while playing with Odin, I thought I was locked at the downloading screen while testing odin. (Didn't hold down the power button long enough to shut off tab) I thought my only solution was to continue and root. No problems rooting, it was easy. I just wanted to make sure I get the TouchWiz update. Now I learned my lesson I will never do an OTA update.
Glad you told me that, otherwise I probably would have screwed up my GT. I don't know how I missed the post about backing up the stock image first. I try to read a lot of posts (heck I even use the search box) before trying something new. Anyway, I'm sure it is posted in the forums somewhere if I need to find it.
Thanks!
pmsrefugee said:
Glad you told me that, otherwise I probably would have screwed up my GT.
Click to expand...
Click to collapse
It's not so much that you'll screw up your device by accepting an OTA, but rather that you might lose root and/or your custom recovery (perhaps permanently). Nevertheless, there are some cases of OTAs screwing up devices when accepted over non-stock installs, so IMHO its always best to wait for a flashable ROM.
pmsrefugee said:
I don't know how I missed the post about backing up the stock image first. I try to read a lot of posts (heck I even use the search box) before trying something new. Anyway, I'm sure it is posted in the forums somewhere if I need to find it.
Thanks!
Click to expand...
Click to collapse
Yes, I believe the stock retail recovery is posted in the CWM recovery download package here: http://forum.xda-developers.com/showthread.php?t=1130574. You'll note that Step 3 is where you were advised to backup your original stock recovery, although the step is (correctly) noted as optional. No big deal, in any event. Glad I could help.

Does anyone know....

I'm just wondering, I purchased a phone on ebay (not knowing it was flashed/rooted). The boot animation says "clean rom" so after researching this site and the forums for this device, I see that it's probably a rom you guys are familiar with and it seems to be ICS based (from what I can see). With that being said, does this mean when they actually RELEASE the stock ICS that I probably won't get the update to my phone? Because I really would like to see what their stock version will be like. Can anyone answer that question or has it even been asked before?
you can't take the OTA rooted or while unlocked but you can flash the RUU once it gets posted after relocking your phone. hopefully by then we will have s-off.
mighty_markus12 said:
you can't take the OTA rooted or while unlocked but you can flash the RUU once it gets posted after relocking your phone. hopefully by then we will have s-off.
Click to expand...
Click to collapse
So does this mean I will no longer be able to receive updates to my phone with this "s-off" or what ever? That sucks, and I can't seem to follow the steps that have been given to get it back to a stock rom or "ruu" what ever THAT means. lol ****that moment when you realize you might look dumb or "newbish" for posting what you just posted****
Your phone has been hacked a little bit, and it's always going to have tell-tale signs.
The worst case scenario is that you have to manually install the next official update and manually relock the phone, which will always say "Relocked" in the boot menu. But if you do everything by the book you should be able to get it back to stock in every other way, including taking subsequent updates over the air normally.
If they get s-off working and you're willing to experiment, it may be possible to completely revert the phone to stock. But that's quite a bit more hackage in order to get your phone "unhacked."
cpurick said:
Your phone has been hacked a little bit, and it's always going to have tell-tale signs.
The worst case scenario is that you have to manually install the next official update and manually relock the phone, which will always say "Relocked" in the boot menu. But if you do everything by the book you should be able to get it back to stock in every other way, including taking subsequent updates over the air normally.
If they get s-off working and you're willing to experiment, it may be possible to completely revert the phone to stock. But that's quite a bit more hackage in order to get your phone "unhacked."
Click to expand...
Click to collapse
To be honest, the only thing I really want is to be able to get it stock on the basis of the apps, getting system updates etc. I'm not concerned with it having evidence of being "tampered with" "hacked" or "rooted". lol It already says "re-locked" The problem is the instructions I've gotten on here seem to go over my head. I might have to be walked through it like a little 3 or 4 year old being taught to sound out little words for the first time. lol Hey, I'm just saying..... No seriously though, I have a MAC and all of the instructions here seem to be based on having a PC
This can be done. But you're going to need to have somebody who knows what they're doing relock and reset your phone from the official ICS RUU after it's released, probably from a PC. There's nothing can be done before then.
cpurick said:
This can be done. But you're going to need to have somebody who knows what they're doing relock and reset your phone from the official ICS RUU after it's released, probably from a PC. There's nothing can be done before then.
Click to expand...
Click to collapse
So this means I'll need to basically need to take or send it to someone to get this done? I don't know why all of these instructions seem like their in spanish to me now, about 3 years ago I used to flash and unlock WM devices almost every other day. I guess I should've never stopped, but once the g1 came out and switched to android devices I stopped flashing and now I'm lost because I need to "tamper with" my phone again, but can't seem to get going at all. I mean SERIOUSLY, I used to flash WM devices so often that if a certain period of time went by without me finding a rom worth "flashing" I'd start having withdrawals. Now i'm feeling like an absolute IDIOT when it comes to getting into these android devices. I think part of that has to do with the fact that I only had PC's and now not only am I trying to tamper with android for my first time, but I only have mac computers as well.
Go to settings, about phone, software information, more, and write what your baseband version is.
http://forum.xda-developers.com/showthread.php?t=1417839
This thread may help you getting osx and fastboot going so you can relock and run an ruu. As was stated above, what is your baseband? If the previous owner flashed the leaked ics you will not be able to go all the way back to stock until either an official ics is released or the s-off tool is released. Good luck!
Sent from my ADR6425LVW using XDA
Unless you have issues, I would leave it as is for the time being. Take time to learn how to do all the stuff you need to do.
The custom ROMs really do make the phone better, you may find you want to keep it in the end. Battery life is much better on a good ROM.
When the official update comes out, we will have a new ROM based on the update within a day or two at most of the release anyway.
The baseband (the radio firmware) is also important. And unfortunately we can not downgrade to older basebands due to not having S=off. So if you are on the newest leaked version then you can run the old stock software.
BTW S=off (or S=on) is a security flag located in the firmware. S=on limits what parts of the phone you can flash and change. S=off gives you full access, it will allow you to downgrade as well. S=off also makes it easier to brick your phone because it does let you change software that is bootstrap essential, the baseband and hboot (sort of like BIOS) for example.
I separate the idea of bootstrap from boot. Most people associate booting with the OS, but bricking effects the firmware initializing the hardware that allows the OS to load and boot. So you get to see the old school term used.
Kennnny1 said:
http://forum.xda-developers.com/showthread.php?t=1417839
This thread may help you getting osx and fastboot going so you can relock and run an ruu. As was stated above, what is your baseband? If the previous owner flashed the leaked ics you will not be able to go all the way back to stock until either an official ics is released or the s-off tool is released. Good luck!
Sent from my ADR6425LVW using XDA
Click to expand...
Click to collapse
The baseband is 1.22.10.0310r, 1.22.10.0308r It also says clean rom 4.1. I don't mind waiting until an offcial ics is released, but I will I be able to receive THAT instead having to have a "dev equivalent" version is what I'm wondering....
It's like I said. Those radios are new, and part of a firmware upgrade that can't be completely backed out. Your simplest bet is to wait for the official ICS release, and then you (or someone more technical) can apply it manually. After doing that and relocking your phone, it should start to take updates automatically again. You'll also have the full factory-installed "bloatware" suite of software.
It's possible to downgrade all the other parts of your software manually back to the latest stock release, but it's expected that your current upgraded firmware version will continue to prevent you from taking OTA releases. It would be good training, actually, though you'll get better results and more support from a PC than on a Mac. If you figured out how to do all this, then you could get your phone back on the HTC software track yourself.
Depending on your flexibility, maybe you can find someone here you could send your phone to who can put it back on the official release track. But even they won't be able to put a permanent fix on it until the official ICS release comes out and somebody uploads it as a manually-installable package.
---------- Post added at 10:08 AM ---------- Previous post was at 09:29 AM ----------
EDIT:
So did the seller not mention on eBay that the phone had been customized?
Some of the responses lean toward telling you how to flash your phone for yourself. Is that something you'd have any interest in? Do you really want to go back to stock, or do you just want to see the difference?
Are you having any problems with the phone?
The custom ROMs are better, overall, but they usually have one or two bugs that you have to learn to live with. (Which is not to say that stock ROMS are bug-free, though the final versions of stock ROMs tend to be very, very stable.) But if you are on custom ROMs, then you're completely off the automatic update path, and everything will have to be done manually.
So unless you want to learn how to flash your own phone, the only way to get updates is to set it back to stock so HTC and Verizon can handle the updates for you. And therein lies the dilemma, because that in itself is something which must be flashed manually from where you're currently at.
(Oh, and you're probably going to end up losing any of your own customizations in the process, though the data on your SD card should be safe.)
cpurick said:
It's like I said. Those radios are new, and part of a firmware upgrade that can't be completely backed out. Your simplest bet is to wait for the official ICS release, and then you (or someone more technical) can apply it manually. After doing that and relocking your phone, it should start to take updates automatically again. You'll also have the full factory-installed "bloatware" suite of software.
It's possible to downgrade all the other parts of your software manually back to the latest stock release, but it's expected that your current upgraded firmware version will continue to prevent you from taking OTA releases. It would be good training, actually, though you'll get better results and more support from a PC than on a Mac. If you figured out how to do all this, then you could get your phone back on the HTC software track yourself.
Depending on your flexibility, maybe you can find someone here you could send your phone to who can put it back on the official release track. But even they won't be able to put a permanent fix on it until the official ICS release comes out and somebody uploads it as a manually-installable package.
---------- Post added at 10:08 AM ---------- Previous post was at 09:29 AM ----------
EDIT:
So did the seller not mention on eBay that the phone had been customized?
Some of the responses lean toward telling you how to flash your phone for yourself. Is that something you'd have any interest in? Do you really want to go back to stock, or do you just want to see the difference?
Are you having any problems with the phone?
The custom ROMs are better, overall, but they usually have one or two bugs that you have to learn to live with. (Which is not to say that stock ROMS are bug-free, though the final versions of stock ROMs tend to be very, very stable.) But if you are on custom ROMs, then you're completely off the automatic update path, and everything will have to be done manually.
So unless you want to learn how to flash your own phone, the only way to get updates is to set it back to stock so HTC and Verizon can handle the updates for you. And therein lies the dilemma, because that in itself is something which must be flashed manually from where you're currently at.
(Oh, and you're probably going to end up losing any of your own customizations in the process, though the data on your SD card should be safe.)
Click to expand...
Click to collapse
Well, I've kind of decided to just keep what I have. I don't have any issues other and it seems to run smoothly. What I REALLY want to see is what the official update will be like as being "stock released" when it comes out and was concerned that I might not be able to get the update because of the "clean rom" I have now being ICS based (as far as I can see). Other than that, I'm fine until then.
You really should consider leaving negative feedback if they ebay seller did not state in the auction that the phone was rooted and running a custom rom. If I sell a phone and im too lazy to revert it to stock ill ALWAYS state its rooted and what its running in the auction etc
mdunn1066 said:
You really should consider leaving negative feedback if they ebay seller did not state in the auction that the phone was rooted and running a custom rom. If I sell a phone and im too lazy to revert it to stock ill ALWAYS state its rooted and what its running in the auction etc
Click to expand...
Click to collapse
Good point, I mentioned it in the feeback portion and rated him low on the "item described accurately" portion
I would just wait til offiical ics is released. I am sure there will be instructions here on xda on how to relock and flash the new official ics ruu. It will involve downloading some files and entering items into command prompt from PC.
sent from my Rezound
stelv said:
I would just wait til offiical ics is released. I am sure there will be instructions here on xda on how to relock and flash the new official ics ruu. It will involve downloading some files and entering items into command prompt from PC.
sent from my Rezound
Click to expand...
Click to collapse
The problem is I don't HAVE a PC. It's already "re-locked" though. I just want to be able to receive the update without having to deal with any other flashing etc. But from what I was told, I should be able to since the current flashed rom is nearly stock (clean rom) and I'm already re-locked. But I guess we'll just see....
refuse2bstopped said:
The problem is I don't HAVE a PC. It's already "re-locked" though. I just want to be able to receive the update without having to deal with any other flashing etc. But from what I was told, I should be able to since the current flashed rom is nearly stock (clean rom) and I'm already re-locked. But I guess we'll just see....
Click to expand...
Click to collapse
seems like people are giving you information that is kinda all over the place.
Lemme try and help clear this up, since you are in a odd scenario.
You are running cleanrom 4.1 on a re-locked phone. For starters, cleanrom 4.1 is based off the current ics LEAK and is not an official OTA update. Chances are high you won't be able to get the OTA if the rom is not a stock rom, and also because chances are you don't have a stock recovery even though it is relocked. Since you are currently on the latest leaked firmware, not an official firmware, you can run the RUU for the phone and go back to stock. In your case, your kinda lucky with this, as you don't technically need a computer to run it. You would need someone to extract the PH98IMG.zip file from the RUU.EXE file for you to run when the OTA comes out through Hboot.
Be for warned, doing it like this, will wipe all data.
I would say you should run the leaked RUU on the phone, as since it is a beta testing Leak, you should still get the OTA, and that way the phone will think it is completely stock and get the latest update.
If you wanna do this, ask and we can help you.
nosympathy said:
seems like people are giving you information that is kinda all over the place.
Lemme try and help clear this up, since you are in a odd scenario.
You are running cleanrom 4.1 on a re-locked phone. For starters, cleanrom 4.1 is based off the current ics LEAK and is not an official OTA update. Chances are high you won't be able to get the OTA if the rom is not a stock rom, and also because chances are you don't have a stock recovery even though it is relocked. Since you are currently on the latest leaked firmware, not an official firmware, you can run the RUU for the phone and go back to stock. In your case, your kinda lucky with this, as you don't technically need a computer to run it. You would need someone to extract the PH98IMG.zip file from the RUU.EXE file for you to run when the OTA comes out through Hboot.
Be for warned, doing it like this, will wipe all data.
I would say you should run the leaked RUU on the phone, as since it is a beta testing Leak, you should still get the OTA, and that way the phone will think it is completely stock and get the latest update.
If you wanna do this, ask and we can help you.
Click to expand...
Click to collapse
Yes, I'm VERY interested, I'm not worried much about the data wipe, between what's backed up to my google account and my SD card, I'll be fine with a data wipe. My battery life is also HORRIBLE for some reason with this rom, but since I've not had it stock yet, I guess I can't REALLY say it's good or bad. But my Droid Bionic's battery life was at least twice as good as this phone's seem to be and I don't use it any more than I did the Bionic.
I will tell you right now the battery life will most likely get worse if you go to stock.
Now if the person who sold it installed a custom kernel rather than the one Scott includes in his ROM (scott makes clean ROM) then battery life could be worse than it should be.
Second, this is a 4.3 inch HD screen... it eats battery like a starving animal.
Third, try cleanROM developers edition (a very striped out cleaned up stock based ROM) or cleanROM senseless. I am running cleanROM developers edition and I get double to triple the battery life over stock.
Unless I actually use the phone... When I use it a lot, I do not get that big of a jump. When using the phone the battery life will be similar due to the screen and CPU use remains similar to what stock would be. (which you would expect, the screen will always use the same power, same for CPU) Its when the phone is in standby mode that you see the real gains. Because all the extra junk that is in the stock software is pulled out and isn't constantly running in the background, waking the phone, starting the cell radio to phone home, etc.
Senseless and the Developers edition have their quirks caused by removing so much of the stock sense based apps and functions and replacing with AOSP versions. Thinks like the caller ID not showing up on the screen until you unlock the phone because the sense phone/dialer can not talk to the AOSP lockscreen. Nothing major just different.

[Q] revert from CM10 back to newest stock firmware

I've been struggling with flashing Cyanogenmod on this device, but finally accomplished it with many hours of trial and error. I'm not a developer and with the limited support this early in the process, it's just harder than most Samsung devices, etc I have flashed. With all of this said, can anyone tell me what is the easiest way to revert back to the original "latest" Sony firmware for the 16gb US version of the Wi-Fi model? I get confused with the custom CWM Recovery I had to push to the device and I don't want to flash something and brick the device. I just want to be very clear so I don't make a mistake. Also, I did try the FLASH TOOL, EMMA, and my device just doesn't show up after following the directions verbatim. My device is unlocked and running the latest CM10 (4.2) and it just has some issues I am not pleased with...Seems a bit laggy in simple games, screen mirroring doesn't work, and the zoom issue in Chrome and other areas is a bit bothersome. Not complaining about the great work the developers have done, just thinking for what I do it may be best to revert back for now. It's just too early I suppose. Thanks in advance.

[Q} Reverting to stock rom/upgraded rom (modem worry)

Hi all
Recently I upgraded from Samsungs stock 4.1.2 firmware to CyanogenMod 10.2 Stable (based on 4.3.1) using their installer program. Since upgrading the Wifi has been unusable and I have not managed to get the problem resolved through their forums so I have decided to go back to the stock rom.
Now that Samsung have re-released 4.3 for the S3 in the UK (after the one from last month which was pulled for problems) I would like to use this one as it fixes a bluetooth streaming issue I have endured for a long time. I can't find this new firmware for download anywhere so wondered if it is feasible to download say the stock rom 4.1.2 and then upgrade somehow? I have a red line on the bootup screen which shows it has been modified (which triangle away won't remove due to custom rom/bootloader or something like that) so I believe this means I will be blocked from then upgrading from 4.3 OTA but able to do so with Kies?
Being a novice at this I am obviously worried about breaking my phone and I am not sure if having i9300XXEMG4 as a baseband version is an issue among other things after reading the forums. As much as I have read about EFS and the downgrading modem problems, none of it is making sense to me at the moment, even after reading all the documents. Brain freeze maybe!
The cyanogenMod also changed recovery and unlocked the bootloader going by what I have read, is this an issue I need to worry about?
Any advice that can take away some worries and get me on the right path would be muchly appreciated!
You are posting in the wrong forum .
UNDERSTAND FIRST
http://forum.xda-developers.com/showthread.php?t=2362743
Network IMEI EFS
http://forum.xda-developers.com/showthread.php?t=2393289
Downgrade and network problems .
http://forum.xda-developers.com/showthread.php?t=2531221
JJEgan said:
You are posting in the wrong forum .
UNDERSTAND FIRST
http://forum.xda-developers.com/showthread.php?t=2362743
Network IMEI EFS
http://forum.xda-developers.com/showthread.php?t=2393289
Downgrade and network problems .
http://forum.xda-developers.com/showthread.php?t=2531221
Click to expand...
Click to collapse
Thank you for your post. I did follow a link in the !!ALL QUESTIONS GO IN THE Q&A FORUM!! OR THEY MAY BE DELETED!! sticky thread which took me to the Q&A forum where I thought I was posting. It is possible a confusion happened during the sign up process.
After reading those threads, two of which I had already read before posting, I have more understanding than I did before. Somehow I missed about the S3 not having a locked bootlader to begin with. I have backup up the EFS using Ktool but also understand it would have been more useful to do before flashing CM 10.2 as I now only have a EFS v2 backup rather than a version 1. What I am unsure of is what is my best action to take at the moment, going by the information I have. I can it is best not to go downgrade to earlier firmwares unless I wanted an added headache of the modem workarounds but do not see the best way to get back to a stock 4.3 firmware still.
I am on Three mobile (H3G) in the UK but don't think my phone is actually locked to them and don't know if that means the BTU is the option I should be choosing. Even so, when I check the firmwares on http://www.sammobile.com/firmwares/2/ I can only see a firmware added last month which I have to assume is the bad 4.3 update that hit the UK and was pulled after the problems it caused. If it was my best option for flashing, even with the problems it caused, how would I then go about getting the extra update that Samsung pushed out to fix the problem?
I saw the Korean factory flash in one of the threads too, not sure if this is too extreme (and potentially more dangerous) than the other options which may be available to me.
Obviously I would like to do this right the first time, rather than stumble backwards fixing all the mistakes I make at the time. So sorry if I am asking what may be simple to some. My knowledge of phones sucks and I wish I hadn't been tempted by the easy looking Cyanogenmod installer now!
Noticed after a few cache and devlik cleans and reboots that the wifi started working on the CM 10.2 mod but only for the main browser and hit and miss with google play. Every over app didn't work on wifi though, but did on cell. I googled all over to see many with similar problems, which suggested manually setting the time and date and static ip settings, clean davlik and updating play apps after deleting their cache.
None of them worked. So to potentially getting away from flashing, does anyone know any other ideas to resolve this? Wifi connects, stock google browser works, Play works flakey. Other installed browsers wont load any pages or connect to the net, such as speed testing app. The only unusual app that also works in a twitter app. Installed an app to see if there was a hidden proxy setting, but it found nothing, Really strange. All the apps work on cell.
Follow the guide in general forum, stickies, to flash back to stock BTU. Network lock is irrelevant to rom.
Choose either 4.1.2 or 4.3 but your baseband must be EMG or later as you now have efs v2.
Don't flash things you don't fully understand, any non Samsung rom has drawbacks you'll have to live with.
In the stickies is a world of information supposed to help you.
boomboomer said:
Follow the guide in general forum, stickies, to flash back to stock BTU. Network lock is irrelevant to rom.
Choose either 4.1.2 or 4.3 but your baseband must be EMG or later as you now have efs v2.
Don't flash things you don't fully understand, any non Samsung rom has drawbacks you'll have to live with.
In the stickies is a world of information supposed to help you.
Click to expand...
Click to collapse
Appreciate you giving me a direction to go. It seems the problem I had finding firmwares the last few days were due to Hotfile going offline and Sammobile rebuilding their index of firmwares. I found through the forums 4.3 BTU I9300XXUGMJ9_I9300OXAGMJ9_BTU.zip which contained a 1.5GB file called I9300XXUGMJ9_I9300OXAGMJ9_I9300XXUGMJ9_HOME.tar.md5 which I think is the correct one which I will try and flash later using the guides. It's not the new fixed 4.3, it's the older broken one but I guess in time I can apply the fix that Samsung are pushing out. This was part of my original question and now i have seen from other posts in the last few days that there is no full copy of the 4.3 anywhere.
The timing of me doing this appears to have been bad for a few of the above reasons, making working it out more difficult to work out for someone who has not done this before.
I can see from your signature and also your post that you think questions such as mine are easily answered in the various threads and through search. Personally I did try all those options first but either my lack of understanding or the overwhelming amount of information meant I was unsure as to what I should actually be doing, let alone which guide to follow. Even googling for BTU or searching xda to try and find what it means was fruitless so trying to put the pieces together is not easy if you have no experience with phones. I have programmed a Pi to do many tasks, built mainframe>SAS gateways and various technical challenges but I still struggle with all the phone flashing info
Many thanks again. Even a few words have been helpful
If you flash the kernel from the Chinese ZCUBMK it will fix all the broken parts of the current uk rom, until the latest ota emerges on xda.
I don't mind helping people who have made a genuine attempt to help themselves, my signature is aimed at the those who flash anything they find then demand someone give them an instant fix.
Your only mistake seems to have been the depth of research before you started, which could have been fatal to your phone -many first time flashes end up with a new motherboard required.
Sent from my GT-I9300 using Tapatalk
If the ota doesn't work in the next few day's I will try that kernel, thanks for that info!
I managed to flash the older official 4.3 firmware just now, so progress has been made A quick check shows me that the power on/lock screen lag problem is present so I assume the other issues will be there too. The red line showing the flash counter has gone and I got no modified phone error when attempting an ota update, as well as device status saying official, so I assume I should be able to upgrade that way when they allow more upgrades on the rollout server.
In case anyone else needs to do the same, this is what I did:
1) Downloaded https://mega.co.nz/#!DVxVgZZb!LIxKGA2Q_KbBH9APo_slOCdZNGJgfn1O6fxOF4C OkHA which I found via a thread titled [Official Firmwares] I9300XXUGMJ9 (Android 4.3) - Ireland (VDI) [04-11-13]
2) Followed the flashing instructions on this page
3) After flashing I got stuck at the Samsung boot screen with the blue light on, even after reseting a few times. So I powered off, held down the home button, volume up and then the power button which took me to the recovery screen where I chose the factory default option. All worked fine after that.
Thanks once again for your help with this boomboomer. A bit of direction was enough to give me the confidence to try it. It's nice to be back to a familiar interface (although it has changed from the 4.1.2 I had before) but the initial setup reminded me of all the bloatware installed. It's a fair bit slower than CyanogenMod was but it all seems to work ok. Once I get the ota update i'll root and freeze some apps to sort that out. Now to install TSF shell

Good spec but lousy apps and Bluetooth.

I took a gamble buying a Chinese phone redmi-note 2 but sadly! it hasn't worked out for me.
All I wanted from it, was for it to do what it is supposed to do.
Bluetooth
Bluetooth doesn't connect to any of my devices, car, Hi-fi and not even my nexus 7!
Miui updater
Totally useless on my phone. This app crashes every time I select "choose update package"
I have looked for help on YouTube but the majority of videos seem to be Indian, using Indian versions of software where the updater app seems to work perfectly.
I managed to root my nexus 7 with ease but the redmi-note 2 is a nightmare.
I could really do with some of you android guru's to point me in the right direction! in finding a good beginners guide to finding all the apps and suitable rom for my phone, Or better still.! A way to get Bluetooth to work.
First of all check if your device has official rom or custom (if you bought it from China it probably has custom rom so flash official one).
Mine is working very good...
I second what ibeqa said - you're probably running a crapware-loaded ROM. Crashing updater is a good hint. You could also look into "about phone" section for the MIUI version, if it's something like 9.99.99 then it's crapware. "Legit" ROMs have version 7.xx.yy or 6.xx.yy. The crapware ROMs are IMHO the main reason why Xiaomi decided to lock the bootloader on RN3 and other newer phones. Because obviously, those ROMs give them bad reputation even though it's not their fault.
Bluetooth works fine for me, but sometimes it hangs up forcing me to restart it - not optimal but doesn't happen too often.
As for rooting, rooting the Nexus 7 (2012) was the same as RN2 for me - connect to PC in fastboot mode, flash recovery.img, reboot to recovery and flash a custom ROM. There are enough guides out there. For the RN2, fastboot can be accessed by starting the phone with the volume down key pressed.
Agree with the above. Please re-flash using official ROM via fastboot method and then try again. See http://en.miui.com/a-234.html
Android version 5.02 LRX22G
MIUI Version 66.77.33.00(LHMCNCH) Stable
Cpu octo core 2.2Ghz
Ram 2GB
I Have downloaded Update supersu 2.4 and miui HMNote2Global v7.2.2.0LHMMIDA_DA_d71ff21b81_5.0.zip are these correct please?
I installed CWM but have read that TWRP is the one I should be using! is that correct?
The trouble with the redmi 2 ,is there is too much conflicting information out there, making it very difficult for a newbie.
Is there any other things that I need to download?
This whole thing has really put me off the Xiaomi brand. I just expected bluetooth to work ! it is supposed to be standardised worldwide.
To you Guys it is probably fun to mess about with different roms, all I wanted was a working phone.
"MIUI Version 66.77.33.00" <- that's your problem right there. You reseller installed a crapware loaded ROM and has modified the version so that you never get an update (= he can spy on you forever), had you bought from another one, you would have gotten a working phone. I know mine did.
Putting blame on Xiaomi for this is misplaced, unless you want to blame them for being dev-friendly and leaving the bootloader unlocked. They reconsidered by now, though, their newer phones are locked.
In any case, yes TWRP is the way to go personally. CWM has cut important features like backup/restore (at least the version shipped with cyanogen roms I tried), so it's basically useless.
For the ROM, if you have downloaded it from the xiaomi page, then yes. You could also get the rom from xiaomi.eu if you want to use an European language.
If you just want official MIUI then you don't need to install custom recovery (use fastboot method instead as per official instructions). In fact the custom recovery will get removed next time you receive an OTA update.
Personally I use TWRP from this link http://en.miui.com/thread-224679-1-1.html because I wanted to install root. But only do this AFTER you install a clean ROM at the first place.
Crim Soukyuu said:
"MIUI Version 66.77.33.00" <- that's your problem right there. You reseller installed a crapware loaded ROM and has modified the version so that you never get an update (= he can spy on you forever), had you bought from another one, you would have gotten a working phone. I know mine did.
Putting blame on Xiaomi for this is misplaced, unless you want to blame them for being dev-friendly and leaving the bootloader unlocked. They reconsidered by now, though, their newer phones are locked.
In any case, yes TWRP is the way to go personally. CWM has cut important features like backup/restore (at least the version shipped with cyanogen roms I tried), so it's basically useless.
For the ROM, if you have downloaded it from the xiaomi page, then yes. You could also get the rom from xiaomi.eu if you want to use an European language.
Click to expand...
Click to collapse
I bought the phone from Gearbest.EU and expected it to be direct from Xiaomi, as I have never had a problem with this company before.
I have had another go at installing a new rom with the Mi suite and also with the miui flash tool and am not getting anywhere with it. I can't even root the damned thing as it boots into Mi when pressing vol up and start. This happened with CWM and TWRP.
I have said before,that I have little experience with android and perhaps I am going wrong somewhere! or the tutorial posters are using phones that have totally different roms to mine. ,It is very difficult when you have Indian,Chinese and global versions with many variations of each, the same seems to apply to CWM and TWRP.
Is there a way to install this via windows, ie formatting the phone and running an installer direct from pc?
I had a dabble with Linux mint and Artist in the past and found them quite user friendly, I can't believe that android is Linux based! I could have done a fresh install of windows, several times by now,the amount of time I have spent on this. Of course windows truly is global with only a couple of variations . Format disk, run and your away. Then hours installing software.
I am fast getting to the stage where I shall give it a bounce test, from a great height. :crying:

Categories

Resources