Related
Hey there xda'ers!
I just picked up a Titan 4G for $30 :laugh: I always wanted one, I'm using an S3 right now and I plan on switching back and forth at my leisure.
The problem with the Titan is the charger port is VERY finicky. You have to really push the micro USB in and get it in just right for it to charge.
I found replacement ones on eBay for around $7ish. Has anyone replaced one before? Do you guys have any tips?
Thanks to all in advance!
Anyone?
Sent from my SGH-T999 using XDA Premium App
magiconthetire said:
Anyone?
Sent from my SGH-T999 using XDA Premium App
Click to expand...
Click to collapse
have you checked there's no fluff in the original one? mine sometimes looks like it's charging, (ie light comes on red), but never gets charged. this usually means there's fluff inside the usb port and a good hard blow, (pardon the expression), sorts it out...
Sihaz said:
have you checked there's no fluff in the original one? mine sometimes looks like it's charging, (ie light comes on red), but never gets charged. this usually means there's fluff inside the usb port and a good hard blow, (pardon the expression), sorts it out...
Click to expand...
Click to collapse
Sadly, the previous owner must have forced a mini usb into the jack or something, since all the pins are bent in. Or, it may have been dropped on the charger port while plugged in. All in all, the phone is in great shape for what I paid for it, as I always had a fascination with WP7.
I got a quote for $60-$70 to have the new USB port installed since it has to be soldered.
Even still, I plan on keeping it and ordering a back up battery charger from eBay since the phone is easily a 8/10 condition wise and I have already unlocked it :good:
Anyone try Magnetor X... http://www.amazon.com/Magnector-Performance-Magnetic-Charging-Adapter/dp/B00JEN5S6A/ref=sr_1_1?s=wireless&ie=UTF8&qid=1412040478&sr=1-1
It seems like a great alternative to the dock... I don't want to always be taking out the thing to plug in... Magnetic and call it a day.\
I just bought three, arrived before my wife's Z3C (I'm getting the T-mobile Z3 when it's released). Look high quality enough.
I ordered one which it appears is in the same package as the phone so hopefully today or tomorrow. I'll report back if no-one else has by the time it arrives.
I heard these may not have enough clearance if you have certain cases on your phone.
clearance is limited, but the magnet has real bite - the only criticism is that it can lean away from the screen towards the rear of the phone, although that depends entirely how you hold it once attached - no led indicator, but the phone does that for you, and no issues as to the effectiveness of the charge (I've used 36% battery on the first day with moderate/reasonable use) - not perfect, just a lot better than you thought it would be......
rmd0311 said:
Anyone try Magnetor X... http://www.amazon.com/Magnector-Performance-Magnetic-Charging-Adapter/dp/B00JEN5S6A/ref=sr_1_1?s=wireless&ie=UTF8&qid=1412040478&sr=1-1
It seems like a great alternative to the dock... I don't want to always be taking out the thing to plug in... Magnetic and call it a day.\
Click to expand...
Click to collapse
One girl on here that I talk to said she's been using the magnetic charger on her Z2 and absolutely loves it! So I think it's worth buying (already did actually lol, but waiting for Z3 as I have the HTC One M8 right now until it gets released here in the U.S., so have to wait and see). Apparently it charges twice as fast as the regular USB wall charger does.
RockStar2005
Right, I have one of these now and can report it's excellent. The magnet is pretty strong so holds to the phone well. Only problem I've found is that the Smart Connect app sees it as the same as the dock which is a little annoying as I used the dock at night to do things like turn off bluetooth and start Sleepbot etc.
I also bought an actual magnetic charging cable (this one: http://www.mobilefun.co.uk/magnetic-charging-cable-sony-xperia-z3-z3-compact-z2-black-p41526.htm) and the magnet on that is far weaker and comes off if you touch the phone at all while charging.
I definitely recommend the Magnetor X
thanks! i definitely am going to try this!
3Shirts said:
Right, I have one of these now and can report it's excellent. The magnet is pretty strong so holds to the phone well. Only problem I've found is that the Smart Connect app sees it as the same as the dock which is a little annoying as I used the dock at night to do things like turn off bluetooth and start Sleepbot etc.
I also bought an actual magnetic charging cable (this one: http://www.mobilefun.co.uk/magnetic-charging-cable-sony-xperia-z3-z3-compact-z2-black-p41526.htm) and the magnet on that is far weaker and comes off if you touch the phone at all while charging.
I definitely recommend the Magnetor X
Click to expand...
Click to collapse
3Shirts,
The cable I bought is this one, which is made by Magnector X: http://www.amazon.com/gp/product/B00JEMESHG/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
The reviews for it appear to be strongly favorable, so I am confident it will work great. What brand is the one you posted though? Can't find the maker name anywhere.
If you scroll down on mine, it says that Magnector makes this charger with Japanese parts not Chinese, so that may be the difference? Not sure. People who I've talked to on here who have the Z2 or Z3 and this charger cable say it's amazing too. So I definitely agree with your statement, though I have yet to try it out (I have the cable but waiting for Z3's release here in the U.S. lol).
RockStar2005
RockStar2005 said:
3Shirts,
The cable I bought is this one, which is made by Magnector X: http://www.amazon.com/gp/product/B00JEMESHG/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
The reviews for it appear to be strongly favorable, so I am confident it will work great. What brand is the one you posted though? Can't find the maker name anywhere.
If you scroll down on mine, it says that Magnector makes this charger with Japanese parts not Chinese, so that may be the difference? Not sure. People who I've talked to on here who have the Z2 or Z3 and this charger cable say it's amazing too. So I definitely agree with your statement, though I have yet to try it out (I have the cable but waiting for Z3's release here in the U.S. lol).
RockStar2005
Click to expand...
Click to collapse
Since it's also Magnector I would assume the magnets on that are as good as the ones on the adapter so it's probably great. Looks to basically the same but a fully wired version rather than being a microusb adapter like the OP.
I myself have also purchased this magnetic cable check out my review in the other magnetic cable thread. :good:
3Shirts said:
Since it's also Magnector I would assume the magnets on that are as good as the ones on the adapter so it's probably great. Looks to basically the same but a fully wired version rather than being a microusb adapter like the OP.
Click to expand...
Click to collapse
Yes I agree. Thanks.
The one I got's connector is smaller and I thought that made it more practical.
RockStar2005
Deleted. Wrong thread.
Just tried mine. Works much much better then the cheap one I bought on ebay. The magnet keeps it in place if you move the phone around, when the cheap one would fall off.
Sent from my D6603 using XDA Free mobile app
How does the chraging time compare to USB port?
abhinav.tella said:
How does the chraging time compare to USB port?
Click to expand...
Click to collapse
I heard speeds are great. However, there are no data to support that claim. I bought both the Magnetor X wire and adapter to test out the sizes, convenience, etc.--they will be coming later this week. I am discharging my phone until it goes 1% or so, then charge with various cables and adapters I have in hand (including OEM). Then compare it with the Magnetor X.
I've ordered the Z2 and it should be coming to my door any day now. When I realized that a magnetic charger might be a good idea to prevent wear of the microUSB port I started to look at the options available. Unfortunately the charging dock sold by Sony is too expensive in my opinion and I would like to find an off-brand alternative. I've looked through the posts on this forum and have come to understand that putting the charger in the wrong direction could be a big mistake. I'm still willing to buy just a cable but would prefer a dock to help prevent this.
My questions is does anyone have a suggestion for a dock(preferable) / cable?
I found this cable on amazon:
http://www.amazon.ca/gp/product/B00...pf_rd_t=101&pf_rd_p=1947489602&pf_rd_i=915398
PS: A lot of docks on amazon have some bad reviews and I'm wary of buying them
I was in the same boat. The Sony dock looks nice like but it was fairly expensive.
I just ordered this last week:
http://www.amazon.ca/Magnector-Perf..._1_2?s=wireless&ie=UTF8&qid=1421124799&sr=1-2
I've got genuine Sony and this one as well. Sony charger is cut more precisely, phone is held exactly as it should with no wiggle etc. But this alone doesn't justify 10 times higher price. The cheapo one does the job in the same way, I see no difference in charging speed. For example this cable is OK as well. If you don't mind waiting for delivery (it takes about 4 weeks to Europe), I can only recommend these products and Aliexpress site.
Regarding the cables with LED indicator - I've got one and even if it's interesting I don't find it useful. LED light is always on and when it reaches ~95% battery threshold it starts to flicker until fully charged, then the color changes to solid again.
Is it hard to screw up the direction of the charger? I've heard it will completely discharge the battery (It shorts the terminals?)
Also, is there a thin case that has a slot for the magnetic charging / what cases do you use if any?
Thanks for the info guys!
Theoretically the plastic around the terminals should prevent the connector from actually connecting "the wrong way" but in practice it can still happen, especially if you insist in moving and pushing the cable.
If the cable is coming out from "the middle" of the connector is easier to put it wrong (otherwise is easy to remember the cable has to go from the middle of the phone to the bottom so is much harder to make the mistake). However because the phone is so symetric you might confuse the front with the back and put it in reverse even in the docking station.
And last but not least make sure you have good warranty - it is possible that the magnet will "suck out" the connector from the phone, mine is barely hanging and is supposed to be from the batch that fixed this issue.
I have the original Sony dock as well as a third party dock. I also have a magnetic adapter for micro USB. All are working fine. Here are the links:
Third party dock - this works fine with my Z2 even though the title says Z3.
Micro USB adapter
Thanks for the reply unni_kmr, unfortunately I'm in Canada and I can't order through amazon.com easily. (Also that isn't on amazon.ca)
Anyone have input on whether I should get this dock for $15?
http://www.amazon.ca/Patec®-Magneti...=UTF8&qid=1421438530&sr=1-15&keywords=z2+case
Also, I'm looking for a case that's slim but doesn't impede the magnetic charging port. Any suggestions?
EDIT: Found this case, might try to cut a charging hole myself
http://www.amazon.ca/Xcessor-Vapour...id=1421440356&sr=8-2&keywords=z2+case+xcessor
WGuitar said:
Also, I'm looking for a case that's slim but doesn't impede the magnetic charging port. Any suggestions?
Click to expand...
Click to collapse
I don't have a case. I am using the Mocolo tempered glass on front and back. I bought it from here. Its very thin glass. Even with it on the front and back, the phone slides into the docks easily.
slow charging speed
hi there, i recently updated my Z2 , to 4.4.4 and everything is absolutely as expected but magnetic charging speed has taken a serious blow. with 4.4.2 it was as fast as normal cable charging but now with 4.4.4 it has become extremely slow , almost takes 8 minutes to charge 1%, and more than 8-9 hrs to fully charge ..
anyone else facing a similar issue .....kindly suggest solutions.:crying:
thanks
WGuitar said:
I've ordered the Z2 and it should be coming to my door any day now. When I realized that a magnetic charger might be a good idea to prevent wear of the microUSB port I started to look at the options available. Unfortunately the charging dock sold by Sony is too expensive in my opinion and I would like to find an off-brand alternative. I've looked through the posts on this forum and have come to understand that putting the charger in the wrong direction could be a big mistake. I'm still willing to buy just a cable but would prefer a dock to help prevent this.
My questions is does anyone have a suggestion for a dock(preferable) / cable?
I found this cable on amazon:
http://www.amazon.ca/gp/product/B00...pf_rd_t=101&pf_rd_p=1947489602&pf_rd_i=915398
PS: A lot of docks on amazon have some bad reviews and I'm wary of buying them
Click to expand...
Click to collapse
What do you mean by putting the charger in the wrong direction could be bad. Do you mean the magnetic charger can only work in one specific direction?
y300owner said:
What do you mean by putting the charger in the wrong direction could be bad. Do you mean the magnetic charger can only work in one specific direction?
Click to expand...
Click to collapse
Not only it can work in only one direction but even worse if you manage to make it connect in reverse it might break the phone or the battery. Yay Sony!
d210 said:
Not only it can work in only one direction but even worse if you manage to make it connect in reverse it might break the phone or the battery. Yay Sony!
Click to expand...
Click to collapse
I use a "magnetron" cable for several moths now and never had any issues with it.
It is not possible to connect it in the wrong orientation.
I'm really happy with it and would absolutely buy it again.
kuhno said:
I use a "magnetron" cable for several moths now and never had any issues with it.
It is not possible to connect it in the wrong orientation.
I'm really happy with it and would absolutely buy it again.
Click to expand...
Click to collapse
Very expensive cable though...
And if you wiggle it a bit I'm sure you can make contact with it even in reverse. I assume it is using like any other cable the normal "mechanical protection" which consists in a tiny (fraction of a mm) extra plastic on the "lower" pin from magnetic connector.
Hi Guys,
I'm looking for a car dock for my Nexus 6 similar to the pro clip or this fix2car mount http://www.holdersandmounts.co.uk/f...on-mount-dash-mount-with-usb-car-charger.html[1]
Basically my criteria are that I want to be able to take the phone in and out of the mount without having to attach the USB cable after. I want the USB cable to be fixed and the phone simply slides in to it.
The pro clip would cost me 150$+ and the fix2car one I linked would run me close to 70$. I'm looking for something about half that price.
Hope you guys can help!
Thanks
0 replies on XDA and on reddit, something tells me i'm about to drop a hundred bucks on a car mount... AGAIN!
PSA to anyone thinking about it: DO NOT get the airdock 2, it's a piece of poop and the phone falls off constantly.
If you must have the fixed plug, you could hack one in place with some JB Weld. A lot of guys did just that back in the "old" days.
Or suguru, that stuff works great for something like this. BTW, my airdock works great.
Sent from my Nexus 10 using Tapatalk
If you would like to charge your phone in a car dock without having to attach USB each time why don't you get the QI charging dock? It is about $35-$40 here in US, probably about same in UK. And will work with non-bulky case.
EugeneR said:
If you would like to charge your phone in a car dock without having to attach USB each time why don't you get the QI charging dock? It is about $35-$40 here in US, probably about same in UK. And will work with non-bulky case.
Click to expand...
Click to collapse
welllllllll the reason why im trying to avoid a QI charging dock (which btw is not a make or model but the technology, can you specify which model you're referring to?) is because i bought this neato quick charge usb lighter thingy and i'd like to be able to use quick charge..... wireless QI charging is pretty slow and when having the screen on, and steaming music, and using maps for nav, it doesn't actually gain any charge!
three west said:
Or suguru, that stuff works great for something like this. BTW, my airdock works great.
Sent from my Nexus 10 using Tapatalk
Click to expand...
Click to collapse
sugru is 22 american. add shipping, conversion to canadian dollar, and duties and it comes out to a lot thanks for the suggestion, though.
i think i am going with this:
http://www.lightinthebox.com/imobi4...ger-for-motorola-google-nexus-6_p2642248.html
georgeism said:
i think i am going with this:
http://www.lightinthebox.com/imobi4...ger-for-motorola-google-nexus-6_p2642248.html
Click to expand...
Click to collapse
Nice find! I didn't know anyone made one like that for our Nexus 6.
georgeism said:
welllllllll the reason why im trying to avoid a QI charging dock (which btw is not a make or model but the technology, can you specify which model you're referring to?) is because i bought this neato quick charge usb lighter thingy and i'd like to be able to use quick charge..... wireless QI charging is pretty slow and when having the screen on, and steaming music, and using maps for nav, it doesn't actually gain any charge!
Click to expand...
Click to collapse
Well, I am doing the same, streaming and navigating, with Nexus 6 in the dock, using 2.1A USB lighter thingy and it charges.
I am also aware QI is a technology and not a model. There are quite few of those. I am using this one: http://www.amazon.com/gp/product/B00N4H1R1M?psc=1&redirect=true&ref_=oh_aui_detailpage_o07_s01
EugeneR said:
Well, I am doing the same, streaming and navigating, with Nexus 6 in the dock, using 2.1A USB lighter thingy and it charges.
I am also aware QI is a technology and not a model. There are quite few of those. I am using this one: http://www.amazon.com/gp/product/B00N4H1R1M?psc=1&redirect=true&ref_=oh_aui_detailpage_o07_s01
Click to expand...
Click to collapse
the problem is that QI will bottleneck your charging. using a quickcharge usb lighter thing will work via a cable but not through QI!
QI will support up to 15 watts of charging in the future, it was actually announced like a couple of weeks ago or something, so future models will support quick charging
I have quick charger at work and at home. In the car I need the dock I can use with minimum effort and without connecting/disconnecting USB frequently
georgeism said:
i think i am going with this:
http://www.lightinthebox.com/imobi4...ger-for-motorola-google-nexus-6_p2642248.html
Click to expand...
Click to collapse
Curious to know if you got the holder yet?
From the pictures on the site, it appears that one of the claws on the top lands directly on the power and/or volume buttons.
Would like to know if it interferes with proper operation?
uicnren said:
Curious to know if you got the holder yet?
From the pictures on the site, it appears that one of the claws on the top lands directly on the power and/or volume buttons.
Would like to know if it interferes with proper operation?
Click to expand...
Click to collapse
it can if you have it completely tightened down, but you would not be able to pull the phone in and out if it was tightened down. the way i have it now is the clamp holds on to the lip of the phone but not so tightly that I can't easily put the phone in and out of the dock. The clamp does not press on the buttons, this way.
I just bought an OEM Verizon Qi charging phone back, and two different Qi chargers. All sourced from Amazon, and listed as their best sellers.
Neither would connect to the phone and provide wireless charging. I am RMA-ing the new phone back to rule it out.
Could being on a custom ROM be interfering? I am on SkyDragon 4.0. I don't want to bother the dev on it, if it is a hardware problem.
Anyone else have a similar configuration that worked?
BoulderGeek said:
I just bought an OEM Verizon Qi charging phone back, and two different Qi chargers. All sourced from Amazon, and listed as their best sellers.
Neither would connect to the phone and provide wireless charging. I am RMA-ing the new phone back to rule it out.
Could being on a custom ROM be interfering? I am on SkyDragon 4.0. I don't want to bother the dev on it, if it is a hardware problem.
Anyone else have a similar configuration that worked?
Click to expand...
Click to collapse
as far as i know, there is no "oem" charging backs available. you can buy an aftermarket sticker to make it work though.
anyways, the sticker should have 4 contact points, not 2. if you have that, the only way to properly verify its working is to put stock back on.
yes, it should work on SD, but to rma a device, without verifying the issue on the clean stock it was intended to run on is just not smart.
Yep, my back has four contacts, to match the internal contacts on teh phone.
it is branded LG and "Verizon 4G LTE", same as my original, hence why I referred to it as OEM.
I believe they made them standard for sale in Rest of World and optional for the US.
It is hard for me to believe that the charging on those two pins would be disabled in software, but considering the ridiculousness of US carriers, I put nothing past them. Which is why I wanted to know if anyone had one that worked.
I didn't RMA the phone, just the 4-pin optional Qi charging back plate. To call someone "not smart," when you clearly have no grasp of the facts...that's not smart.
I do know from experience that AOSP roms do break wireless charging, but SkyDragon is based off of stock, so it should work just fine.
BoulderGeek said:
Yep, my back has four contacts, to match the internal contacts on teh phone.
it is branded LG and "Verizon 4G LTE", same as my original, hence why I referred to it as OEM.
I believe they made them standard for sale in Rest of World and optional for the US.
It is hard for me to believe that the charging on those two pins would be disabled in software, but considering the ridiculousness of US carriers, I put nothing past them. Which is why I wanted to know if anyone had one that worked.
I didn't RMA the phone, just the 4-pin optional Qi charging back plate. To call someone "not smart," when you clearly have no grasp of the facts...that's not smart.
Click to expand...
Click to collapse
i can only comment on what you post, and dont pretend to understand what you mean while vaguely explaining it.
what i perceive from your post appeared to be "not smart", and thats how i called it.
now that you have clarified, even returning the back plate before verifying the issue on clean stock, is not smart, but hey, its your time and money to do with as you wish.
good luck with that
Have you checked the other threads on this already?
There are only a few places to get the parts that enable wireless charging on the G3. As far as I know, the only official OEM part that verizon sells is the flip case. Any others are either the Sticker type, or an OEM part imported from europe, to get the correct 4 pin option, (Both at&t and korean variant parts will not work, as the 4 pins do not align correctly for the verizon phone.) and neither would have the verizon logo on it, unless it was an aftermarket mod from a third party, and I'd be a bit weary of those, personally. So I'm a little confused on the 4 pin, verizon logo part of your message. Still, if it is a correctly modified original part, with an aftermarket sticker attached on it, it should work on stock, and on most roms based of stock, like SD's ROM.
http://www.amazon.com/gp/product/B00N29ECGE
Bought one from Amazon last week from a US seller who unfortunately doesn't seem to be listed anymore (sold out?). Back was OEM with only the LG logo, and had the Qi+NFC pins in the correct place for the VS985 (the AT&T/Asian models had their pins aligned slightly differently).
Works with my Qi charger fine, and I too am running SD 4.0, as I value battery life.
iphydeauxi said:
I do know from experience that AOSP roms do break wireless charging, but SkyDragon is based off of stock, so it should work just fine.
Click to expand...
Click to collapse
I have actually used quite a few AOSP roms and they seemed to have fixed it. I've been using PA for about 3 months now and its been working this whole time. Also on my wife's G3 CM12's wireless charging works for her. Just thought i would let you know in case you wanted to try it out again. I'm using some cheap wireless sticker from amazon and all is working on both of our phones
EDIT: This is what i purchased http://www.amazon.com/Wireless-Charging-Antenna-Sticker-T-mobile/dp/B00MWS5L34/ref=sr_1_2?s=wireless&ie=UTF8&qid=1445349009&sr=1-2&keywords=lg+g3+qi+wireless+charging+sticker
Thanks for those constructive posts. Good to know that any issues I may be having are likely hardware. That points me in a good direction.
I should be receiving the replacement back today, so I can see if the problem is my phone core or the accessories.
Yeah, it's weird that the phone back would have Verizon branding, especially if it isn't their part. I can't see an advantage to doing that. The silkscreen looks identical to the OEM back that shipped with the phone.
EDIT: Ah ha! Now I understand what happened. This is the product: http://www.amazon.com/gp/product/B00NL9GWPY?psc=1&redirect=true&ref_=oh_aui_detailpage_o04_s01 I sort of blindly purchased, since it had a good rating. I now see that the seller has taken OEM backs and retrofitted them with a sticker! it's the same deal that you can do for six bucks, and not OEM. So, I am a stooge because I didn't read the fine print.
Amazon is not the place for popular items.
BoulderGeek said:
I just bought an OEM Verizon Qi charging phone back, and two different Qi chargers. All sourced from Amazon, and listed as their best sellers. ...
Click to expand...
Click to collapse
"Best sellers" on Amazon sometimes means "lots of victims".
A couple weeks ago I also search for a genuine LG/Verizon charging back, so that I wouldn't have to mess with a "stick-on" solution. While the items looked promising at first blush, a little research showed that there is no such device as a "genuine LG/Verizon charging back", despite what is obviously marked as such. The genuine charging back from Verizon is a clamshell-like cover, that apparently doesn't fit well with the usual belt clips. Life is like that.
Sadly, Amazon has become a haven for scammers offering counterfeit products of all types. A few months ago, I wanted to buy a power adapter for my Samsung tablet. The price on Samsung's site was $35; the price from all of the vendors on Amazon was $10, for devices clearly marked with the Samsung logo. However, reading the reviews showed that they were all cheap counterfeits that often failed in a month or two.
I have come to the point of only buying stuff on Amazon, that Amazon buys directly from the manufacturer. Ie, "sold by and ships from Amazon", not "sold by <whomever> and ships from Amazon".
As they say, "buyer beware".
---------- Post added at 02:27 PM ---------- Previous post was at 02:23 PM ----------
BoulderGeek said:
...
Yeah, it's weird that the phone back would have Verizon branding, especially if it isn't their part. I can't see an advantage to doing that. ...
Click to expand...
Click to collapse
Okay, now you do (grin).
Thanks, Dean. You're absolutely right.
I received the second replacement "wireless charging & NFC" cover, last night. Still doesn't work on my phone. But, it looks like a new Verizon cover, just one that had some yahoo replace the original NFC antenna with a cheap knockoff that purportedly would charge.
Ah, well, I got a new, unscratched G3 phone back plate and learned a lesson.
Icanthelplt90 said:
I have actually used quite a few AOSP roms and they seemed to have fixed it. I've been using PA for about 3 months now and its been working this whole time. Also on my wife's G3 CM12's wireless charging works for her. Just thought i would let you know in case you wanted to try it out again. I'm using some cheap wireless sticker from amazon and all is working on both of our phones
EDIT: This is what i purchased http://www.amazon.com/Wireless-Charging-Antenna-Sticker-T-mobile/dp/B00MWS5L34/ref=sr_1_2?s=wireless&ie=UTF8&qid=1445349009&sr=1-2&keywords=lg+g3+qi+wireless+charging+sticker
Click to expand...
Click to collapse
I want to try again, but my phone was just replaced by VZW, and it has 35B. I'm treading lightly on the recovery/rooting until I do enough research to be confident in my next attempt. I REALLY miss CM.
I have the original back cover and the only way that the qi charger works when I raise up the pad...